USING ALV PUSH BUTTONS

I am working on ALV PUSH BUTTONS. When I am clicking the button  some records in an internal table is displayed in ALV. Each column is repeated twice for the first time and on the second time it is working fine.What is the reason and what I have to do.I am using 3 push buttons. And with the same itab.But according to the buttons clicked column display will vary.

Hi,
Handle the EVENT of each push button & modify the FIELDCATALOG accorindlgy with the names of columns which you want to be displayed against each button.
Best regards,
Prashant

Similar Messages

  • How do I use a push button digital trigger with my 6034E DAQ board?

    I am only a Lab View toddler.
    I am currently using a push button, wired to PFIO/TRIG1 and DGND, with a anolog trigger. However noise is causing my program to be triggered. I was told that a digital trigger would help to reduce the random triggering. How do I create a push button digital trigger?
    Thanks

    implement a schmitt trigger.
    Struggling with Labview wrote in message
    <[email protected]>...
    >I am only a Lab View toddler.
    >I am currently using a push button, wired to PFIO/TRIG1 and DGND, with
    >a anolog trigger. However noise is causing my program to be triggered.
    >I was told that a digital trigger would help to reduce the random
    >triggering. How do I create a push button digital trigger?
    >Thanks

  • How to print the Module pool screen using a push button in the screen

    Hi Every one,
                         i have developed a module program , which have a selection screen and it display the output in a structured way.
    output includes boxes, texts etc...
    my problem is :---
    How to print the Module pool screen using a push button in the screen.

    When the "Print" button is pressed:
    leave to list-processing and return to screen 100.  "(current screen)
    Call a transaction that runs your print program.
    Rob

  • How to use boolean push button as a constant to add to other values

    Hello all, I am trying to use a boolean OK button and a constant to make something similar to the calculator project I've read about in other posts. I labled the button $1.00, $0.25, ......  So on.  I just want to add the value to an indicator every time I push the button.
    The closest I can get is the vaue is displayed while I hold the button in and the it goes to 0 as I realese it. I want it to add up each time its pressed.
    Thanks in Advance
    Kevin
    Solved!
    Go to Solution.

    Hi Kevin, this is Paul from Applications Enginering at NI.  Try something like in my attachment.  You can use case type statements to evaluate whether a button was pressed, then assign that true case a value.  Good luck with it
    Paul Davidson
    Sound and Vibration Software Staff Product Support Engineer
    National Instruments
    Attachments:
    Dollars and Cents.png ‏20 KB

  • How to ijntroduce PUSH Button in KD_GET_FILENAME_ON_F4

    Dear Experts,
    I am new to ABAP.
    I know how to use push button in Sel-Screen. But my requirement is:
    1)How can I use a push button in "KD_GET_FILENAME_ON_F4" so that on hitting the push button a PopUp screen appears.
    2) This Pop up screen should be a file directory screen from which I can select a file.
    3) This file on one click should get considered as "file_name" of the call function "KD_GET_FILENAME_ON_F4."
    Looking forward for advise from experts.
    Regards
    Chandan Kumar

    Dear Mr Klaus,
    Thanks for your reply. The method suggested by you will definitely help the user to directly open a file dialogue box. But I want the code to make it more simpler for the user. After I execute the code The use should get a Push Button. On hitting this push button a POP UP screen should appear. This pop up screen should lear us to the target folder.
    In your suggestion it was possible to open a folder path pop up screen. just I want to intriduce a PUSH button there. Also I want multi selection to be possible. In your suggestion above when I wrote the code as:
    DATA: file_str1 type string.
    data: it_tab TYPE STANDARD TABLE OF file_table,
          lw_file LIKE LINE OF it_tab,
          gd_subrc TYPE i.
    SELECTION-SCREEN begin of block blk with frame title text-100.
    SELECTION-SCREEN SKIP 2.
    parameters : p_file like rlgrap-filename .
    SELECTION-SCREEN end of block blk.
    *F4 input file
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
    window_title = 'Select only Text File'
    default_filename = '.azt'
    multiselection = 'X'
    CHANGING
    file_table = it_tab
    rc = gd_subrc.
    READ TABLE it_tab INTO lw_file INDEX 1.
    p_file = lw_file-FILENAME.
    Start-of-Selection.
      file_str1 = P_file.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = file_str1
    *    filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\test.azt'
      tables
        data_tab                      = it_string
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    In the above code when I use Multiselection = 'X' then in the folder pop up multiselection is possible but the multiselection deosn't
    gets selected for upload.
    Looking forward for your suggestions.
    That is my requirement.
    Regards,
    Chandan

  • Push Button , Label and combo box

    Hi Experts,
    Currently facing a problem , please guide.
    I have two push buttons say A and B and one combo box.
    I am using Combo box with source data as filtered row options.
    What I want to accomplish is when push button A is clicked then my combo box should have different souce of data say sheet 1 in excel and when Push button B is clicked then the same combo box should have source data from sheet 2 from the same excel.
    I mean dynamic selection of source data and then destination data by using combo boxed.
    is it possible ?
    Thanks in advance.
    Thanks & Regards,
    Anjna

    Hi,
    Use 2 combo boxs CB1 n CB 2.
    CB1 : source form sheet1
    CB2:Source from sheet 2
    when push button  A is selected  set dynamic visibility such that u get combo box 1
    when push button  B is selected  set dynamic visibility such that u get combo box 2.
    Case 2:
    Insted of using 2 push buttons you can use a radio butoon and select the lables A or B so that these two combo box components dnt appear at once
    Take a radio button component and map lables as A and B
    under behaviour tab: >Insert selected item:>mapp it with a blank cell say Sheet3!$G$4
    if radio button selection is A then set dynamic visibility such that u get combo box 1
    if radio button selection is b then set dynamic visibility such that u get combo box 2
    formula cells:
    take a blak cell say Sheet3!$H$7 and write formula =IF(Sheet3!$G$4="A","",first label of combo box 2)
    take a blak cell say Sheet3!$H$8 and write formula =IF(Sheet3!$G$4="B","",first label of combo box 1)
    Combo box 1 :Behaviour tab-->Selected item :Sheet3!$H$7
    Combo box 1 :Behaviour tab-->Selected item :Sheet3!$H$8
    check if this suits ur req ...
    @Sri
    Edited by: Sri kamesh on Jun 21, 2011 11:00 AM

  • PUSH BUTTON in the model

    Hi
    How can i achieve this...any help would be greatly appreciated
    I had a Query With Cal Month/Year in rows and Revenue in Columns and Region as Free Chars
    Query is restricted to display last 12 Months using offset variables and Region is restricted to fixed list of 10 regions
    My Requirement is to develop a VC Dashboard/Model with
    11 (10+1) push buttons for 10 Individual Regions + 1 for all 10 regions and a graph
    So
    The initial view of graph will display Revenue by Cal Month/Year  for ALL regions and user can select a region using a push button which will filter the results in graph for that particular region
    and if he selects ALL that is display data for all regions
    Created a Model
    Form with 11 Pushbuttons ...now i am struggling on how to apply values to be filtered to Query
    Please help would be greatly appreciated
    Thanks in advance

    Hi
    Checked with Business with regards to Dropdown for buttons,But they prefer Buttons only
    Can you please elobrate
    "Pls try to create a button with custom action maybe Region1 and drag out from your chart
    to your input port . Meanwhile store all your inputs in a data store and on this new action
    resubmit those values along with your region value ie region1. I have not tried this out,
    pls check and let me know if it works ."
    Thanks

  • Fund Management - Push Button "Prepost"

    Dear All,
    1.  Can anyone know what is the used of push button "Prepost" when we create budget entry...
    2.  Can we change the document after using "Prepost"...
    Thanks in advance for your Help

    Hello,
    It seems to be that you are talking about FMBB budget transaction.
    Please check the following information:
    PREPOSTED
    ===========
    If you want to control a budget entry with/without workflow connection using an approval procedure, then save the entry document by pressing the Prepost pushbutton.
    You store budget temporarily that you want to process later by clicking on the pushbutton Held. The budget document receives a user-defined document number and is stored temporarily in your work center and not in the database.
    HOLD
    ======
    Held documents can only be processed by the respective user/work center. In contrast to all other processing statuses, you can delete held entry documents again.
    Therefore, in your case, I think you should use the buttom Hold instead of Preposted.
    I hope it resolves your problem
    Best Regards,
    Vanessa.

  • ALV GRID-how to select all the check boxes using push button

    Hai All,
    I displayed ALV grid & every record contains one check box as first column.
    If user clicks on one push button all the check boxes needs to selected.
    Could any one tell me how to do this?
    Regards,
    Bhaskar

    Hi Bhaskar,
       Try this code :
    *" Table declarations...................................................
    TABLES :
      spfli.                              " Flight Schedule
    *" Data declarations...................................................
    Work variables                                                      *
    DATA :
      w_checkbox  TYPE c,                  " Check Box
      w_checkbox1 TYPE c,                  " Check Box
      w_lineno    LIKE sy-lilli,           " Current Line No
      w_lines     TYPE i.                  " No. Of Records in Int.Table
    Internal table to hold Flight Schedule data                         *
    DATA :
       t_spfli LIKE
      STANDARD TABLE
            OF spfli.
    Structure to hold Function Codes                                    *
    DATA :
      fs_fcode LIKE LINE OF t_fcode.
                          TOP-OF-PAGE EVENT                             *
    TOP-OF-PAGE.
      PERFORM top_of_page.
                       START-OF-SELECTION EVENT                         *
    START-OF-SELECTION.
      PERFORM fetch_spfli_data.
      SET PF-STATUS 'YMENU1'.
      DESCRIBE TABLE t_spfli LINES w_lines.
      fs_fcode = 'EXIT'.
      APPEND fs_fcode TO t_fcode.
      fs_fcode = 'SELECT'.
      APPEND fs_fcode TO t_fcode.
      fs_fcode = 'DESELECT'.
      APPEND fs_fcode TO t_fcode.
      fs_fcode = 'RETRIEVE'.
      APPEND fs_fcode TO t_fcode.
                        AT USER-COMMAND EVENT                           *
    AT USER-COMMAND.
      PERFORM user_command.
    FORM top_of_page .
      WRITE :/50 'Flight Schedule Information'(008).
      ULINE.
      FORMAT COLOR 1.
      WRITE :/10 'Carrier ID'(001),
              25 'Connection ID'(002) ,
              43 'Airport From'(003),
              59 'Airport To'(004),
              74 'Departure Time'(007),
              93 'Arrival Time'(011),
             106 space.
    ENDFORM.                               " FORM TOP_OF_PAGE
    FORM fetch_spfli_data .
      SELECT carrid                        " Carrier ID
             connid                        " Connection ID
             airpfrom                      " Airport From
             airpto                        " Airport To
             deptime                       " Departure Time
             arrtime                       " Arrival Time
        FROM spfli
        INTO CORRESPONDING FIELDS OF
       TABLE t_spfli.
      IF sy-subrc EQ 0.
        PERFORM display_spfli_data.
      ENDIF.                               " IF SY-SUBRC EQ 0
    ENDFORM.                               " FORM FETCH_SPFLI_DATA
    FORM display_spfli_data .
      SORT t_spfli BY carrid ASCENDING.
      LOOP AT t_spfli INTO spfli.
        FORMAT COLOR 2.
        WRITE :/2 w_checkbox AS CHECKBOX,
                  spfli-carrid   UNDER text-001,
                  spfli-connid   UNDER text-002,
                  spfli-airpfrom UNDER text-003,
                  spfli-airpto   UNDER text-004,
                  spfli-deptime  UNDER text-007,
                  spfli-arrtime  UNDER text-011.
      ENDLOOP.                             " LOOP AT T_SPFLI...
    ENDFORM.                               " FORM DISPLAY_SPFLI_DATA
    FORM user_command .
      CASE sy-ucomm.
        WHEN 'SELECT'.
          w_checkbox1 = 'X'.
          DO w_lines TIMES.
            w_lineno = sy-index + 3.
            READ LINE w_lineno FIELD VALUE w_checkbox.
            IF w_checkbox = '*'.
              CONTINUE.
            ELSE.
              MODIFY LINE w_lineno FIELD VALUE w_checkbox FROM w_checkbox1.
            ENDIF.                         " IF W_CHECKBOX = '*'
          ENDDO.                           " DO W_LINES TIMES.
        WHEN 'DESELECT'.
          w_checkbox1 = ' '.
          DO w_lines TIMES.
            w_lineno = sy-index + 3.
            READ LINE w_lineno.
            IF w_checkbox = '*'.
              CONTINUE.
            ELSE.
              MODIFY LINE w_lineno FIELD VALUE w_checkbox FROM w_checkbox1.
            ENDIF.                         " IF W_CHECKBOX = '*'
          ENDDO.                           " DO W_LINES TIMES.
        WHEN 'RETRIEVE'.
          w_checkbox = ' '.
          DO w_lines TIMES.
            w_lineno = sy-index + 3.
            READ LINE w_lineno FIELD VALUE w_checkbox INTO w_checkbox.
            IF w_checkbox = 'X'.
              PERFORM fetch_sflight_data.
              PERFORM display_sflight_data.
            ENDIF.                         " IF W_CHECKBOX = 'X'
          ENDDO.                           " DO W_LINES TIMES.
      ENDCASE.                             " CASE SY-UCOMM
    ENDFORM.                               " FORM USER_COMMAND
    This report gives you the SPFLI Data and places a check box in front of each record. When u click on select all button it will select all the records. And if you click on deselect all it will deselect all the records. When you are trying this maintain the pf-status 'YMENU1' and give the function codes as in the code.
    Regards,
    Swapna.

  • How to get GUI Status(Push Buttons) in ALV Report

    Hi Friends
    I have a requirement in a way that:
    Once selection-screen was processed,an ALV report has to come and above the ALV List,I need a custom GUI Status(4 Push Button) with Push Buttons Logic.
    Once I had clicks on thesse push button,I need to display one more ALV List and above this List,again I need a custom GUI Status(2 Push Buttons) with Push Buttons Logic.
    Can anyone throw some light how we can achieve this.
    Thanks for your cooperation!
    Regards,
    Madisetty

    data: rt_extab type slis_t_extab,
            g_ucomm like sy-ucomm ,
            g_selfield type slis_selfield.
    form alv_display .
      call function 'REUSE_ALV_LIST_DISPLAY'
         exporting
         i_callback_program             = g_repid
         i_callback_pf_status_set       = 'PF_STATUS'
         i_callback_user_command        = 'USER_COMM'
           it_fieldcat                    = it_fldcat
          tables
            t_outtab                       = it_final1
      perform pf_status using rt_extab.
      perform user_comm using g_ucomm g_selfield .
    endform.  
    form pf_status  using    p_rt_extab.
      set pf-status 'PF_STATUS' excluding p_rt_extab.
    endform.
    form user_comm  using    p_ucomm like sy-ucomm
                             p_selfield type slis_selfield.
      data: l_row type i.
      case  p_ucomm.
        when 'DISPLAY_PO'.
          loop at it_final1 into wa_final1.
            if wa_final1-sel eq 'X' .
              l_row = l_row + 1.
            endif.
            if l_row gt 1.
              message e004.
            endif.
            clear wa_final1.
          endloop.
          p_selfield-fieldname = 'SEL'.
          read table it_final1 into wa_final1 index p_selfield-tabindex .
          set parameter id 'BES' field wa_final1-ebeln.
          call transaction 'ME23N'.
      endcase.
    endform.
    *create user interface for gui status by double clicking on 'PF_STATUS'.
    *Check the above sample code .

  • Push button in alv report

    Dear Experts,
             How to add pushbutton in alv report.....
    *& Report  ZTT_TEST_ALV
    REPORT  ZTT_TEST_ALV.
    *data declarations
    type-pools : SLIS.
    *  data : BEGIN OF wa_kna1,
    *                kunnr type kunnr,
    *                name1 type name1,
    *         end of wa_kna1,
    * it_kna1 like tABLE OF wa_kna1.
    data : begin of wa_mara,
      matnr type matnr,
      end of wa_mara,
      it_mara like table of wa_mara.
      data : it_fcat type slis_t_fieldcat_alv,
             wa_fcat like line of it_fcat.
    *selection screen
      SELECTION-SCREEN begin of block k with frame title text-001.
    *  select-OPTIONS : s_kunnr for wa_kna1-kunnr.
         select-OPTIONS : s_matnr for wa_mara-matnr.
      SELECTION-SCREEN end of block k.
    *select auery
    *SELECT kunnr name1 INTO table it_kna1 from kna1 where kunnr in s_kunnr.
    select matnr into table it_mara from mara where matnr in s_matnr.
    *for displaying fieldcatalog
      PERFORM fcat using '1' 'MATNR' 'material Number' 'C410' '20'.
    *  PERFORM fcat using '2' 'NAME1' 'Customer Name' 'C410' '36'.
    *for displaying output
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    *   I_INTERFACE_CHECK                 = ' '
    *   I_BYPASSING_BUFFER                = ' '
    *   I_BUFFER_ACTIVE                   = ' '
    *   I_CALLBACK_PROGRAM                = ' '
       I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
    *   I_CALLBACK_USER_COMMAND           = ' '
    *   I_CALLBACK_TOP_OF_PAGE            = ' '
    *   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    *   I_CALLBACK_HTML_END_OF_LIST       = ' '
    *   I_STRUCTURE_NAME                  =
    *   I_BACKGROUND_ID                   = ' '
       I_GRID_TITLE                      = 'Report for Customer Details'
    *   I_GRID_SETTINGS                   =
    *   IS_LAYOUT                         =
       IT_FIELDCAT                       = it_fcat[]
    *   IT_EXCLUDING                      =
    *   IT_SPECIAL_GROUPS                 =
    *   IT_SORT                           =
    *   IT_FILTER                         =
    *   IS_SEL_HIDE                       =
    *   I_DEFAULT                         = 'X'
    *   I_SAVE                            = ' '
    *   IS_VARIANT                        =
    *   IT_EVENTS                         =
    *   IT_EVENT_EXIT                     =
    *   IS_PRINT                          =
    *   IS_REPREP_ID                      =
    *   I_SCREEN_START_COLUMN             = 0
    *   I_SCREEN_START_LINE               = 0
    *   I_SCREEN_END_COLUMN               = 0
    *   I_SCREEN_END_LINE                 = 0
    *   I_HTML_HEIGHT_TOP                 = 0
    *   I_HTML_HEIGHT_END                 = 0
    *   IT_ALV_GRAPHICS                   =
    *   IT_HYPERLINK                      =
    *   IT_ADD_FIELDCAT                   =
    *   IT_EXCEPT_QINFO                   =
    *   IR_SALV_FULLSCREEN_ADAPTER        =
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER           =
    *   ES_EXIT_CAUSED_BY_USER            =
      TABLES
        t_outtab                          = it_mara.
    * EXCEPTIONS
    *   PROGRAM_ERROR                     = 1
    *   OTHERS                            = 2
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
    *  EXPORTING
    ****   I_INTERFACE_CHECK              = ' '
    ****   I_CALLBACK_PROGRAM             =
    ****   I_CALLBACK_PF_STATUS_SET       = ' '
    ****   I_CALLBACK_USER_COMMAND        = ' '
    ****   IS_LAYOUT                      =
    *   IT_FIELDCAT                    = it_fcat
    ****   IT_EXCLUDING                   =
    ****   IT_SPECIAL_GROUPS              =
    ****   IT_SORT                        =
    ****   IT_FILTER                      =
    ****   IS_SEL_HIDE                    =
    ****   I_SCREEN_START_COLUMN          = 0
    ****   I_SCREEN_START_LINE            = 0
    ****   I_SCREEN_END_COLUMN            = 0
    ****   I_SCREEN_END_LINE              = 0
    ****   I_DEFAULT                      = 'X'
    ****   I_SAVE                         = ' '
    ****   IS_VARIANT                     =
    ****   IT_EVENTS                      =
    ****   IT_EVENT_EXIT                  =
    ***    i_tabname_header               =
    ***    i_tabname_item                 =
    ****   I_STRUCTURE_NAME_HEADER        =
    ****   I_STRUCTURE_NAME_ITEM          =
    ***    is_keyinfo                     =
    ****   IS_PRINT                       =
    ****   IS_REPREP_ID                   =
    ****   I_BYPASSING_BUFFER             =
    ****   I_BUFFER_ACTIVE                =
    ****   IR_SALV_HIERSEQ_ADAPTER        =
    ****   IT_EXCEPT_QINFO                =
    ****   I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
    **** IMPORTING
    ****   E_EXIT_CAUSED_BY_CALLER        =
    ****   ES_EXIT_CAUSED_BY_USER         =
    *  tables
    **    t_outtab_header                = it_
    *    t_outtab_item                  = it_kna1.
    **** EXCEPTIONS
    ****   PROGRAM_ERROR                  = 1
    ****   OTHERS                         = 2
    ***IF sy-subrc <> 0.
    **** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    ****         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ***ENDIF.
    *&      Form  FCAT
    *       text
    *      -->P_0052   text
    *      -->P_0053   text
    *      -->P_0054   text
    form FCAT  using    fp_col_pos
                        fp_fieldname
                        fp_seltext_m
                        fp_emphasize
                        fp_outputlen..
    wa_fcat-col_pos = fp_col_pos.
    wa_fcat-fieldname = fp_fieldname.
    wa_fcat-seltext_m = fp_seltext_m.
    wa_fcat-emphasize = fp_emphasize.
    wa_fcat-outputlen = fp_outputlen.
    append wa_fcat to it_fcat.
    clear : wa_fcat.
    endform.                    " FCAT
    FORM SET_PF_STATUS                                         .
    SET PF-STATUS 'ZNEWSTATUS' .
    "Copy of 'STANDARD' pf_status from fgroup SALV
    endform.
    i need one push button in alv output display.
    Thanks and Regards,
    Thirukumaran. R

    HI THIRU TRY FOLLOWING CODES:
    *& Report  ZSAMPLE
    REPORT  ZSAMPLE.
    TABLES:MARA.
    TYPE-POOLS: SLIS.
    TYPES:BEGIN OF TY_ITAB,
          MATNR LIKE MARA-MATNR,
          ERSDA LIKE MARA-ERSDA,
          END OF TY_ITAB.
    DATA:ITAB TYPE STANDARD TABLE OF TY_ITAB WITH HEADER LINE.
    DATA:FCAT TYPE SLIS_T_FIELDCAT_ALV,
              WA_FCAT TYPE SLIS_FIELDCAT_ALV,
              LAYOUT TYPE SLIS_LAYOUT_ALV,
              WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETERS:P_MATNR TYPE MARA-MATNR.
    SELECTION-SCREEN END OF BLOCK B1.
    START-OF-SELECTION.
      PERFORM FIELDCAT.
      LAYOUT-ZEBRA = 'X'.
      PERFORM OUTPUT.
    *&      Form  PF_STATUS
          text
         -->RT_EXTAB   text
    FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'BUTT'.
    ENDFORM.                    "PF_STATUS
    *&      Form  PUSH_BUTT1
          text
         -->R_UCOMM      text
         -->RS_SELFIELD  text
    FORM GET USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD.
      CASE R_UCOMM.
        WHEN 'GET'.
          IF SY-SUBRC EQ 0.
            CALL TRANSACTION 'SE11'.
          ELSE.
          ENDIF.
        WHEN 'EXIT' OR 'CANCEL' .
          LEAVE PROGRAM.
      ENDCASE.
    ENDFORM.                                                    "PUSH_BUTT1
    *&      Form  FIELDCAT
          text
    -->  p1        text
    <--  p2        text
    FORM FIELDCAT .
      WA_FCAT-SELTEXT_L = 'Select'.
      WA_FCAT-COL_POS = '1'.
      WA_FCAT-FIELDNAME = 'CHECK'.
      WA_FCAT-CHECKBOX = 'X'.
      WA_FCAT-TABNAME = 'ITAB'.
      WA_FCAT-OUTPUTLEN =  '4'.
      WA_FCAT-INPUT(1) = 'X'.
    WA_FCAT-EDIT_MASK(1) = 'X'.
      WA_FCAT-EDIT(1) = 'X'.
      APPEND WA_FCAT TO FCAT.
      CLEAR WA_FCAT.
      WA_FCAT-SELTEXT_L = 'Material Number'.
      WA_FCAT-COL_POS = '2'.
      WA_FCAT-FIELDNAME = 'MATNR'.
      WA_FCAT-TABNAME = 'ITAB'.
      WA_FCAT-OUTPUTLEN =  '18'.
      APPEND WA_FCAT TO FCAT.
      CLEAR WA_FCAT.
      WA_FCAT-SELTEXT_L = 'Date'.
      WA_FCAT-COL_POS = '3'.
      WA_FCAT-FIELDNAME = 'ERSDA'.
      WA_FCAT-TABNAME = 'ITAB'.
      WA_FCAT-OUTPUTLEN =  '8'.
      APPEND WA_FCAT TO FCAT.
      CLEAR WA_FCAT.
    ENDFORM.                    " FIELDCAT
    *&      Form  OUTPUT
          text
    -->  p1        text
    <--  p2        text
    FORM OUTPUT .
      SELECT MATNR ERSDA FROM MARA
        INTO TABLE ITAB
        WHERE MATNR EQ  P_MATNR.
      IF SY-SUBRC EQ 0.
        PERFORM GRID.
      ELSE.
        MESSAGE 'No Records Found' TYPE 'I'.
      ENDIF.
    ENDFORM.                    " OUTPUT
    *&      Form  GRID
          text
    -->  p1        text
    <--  p2        text
    FORM GRID .
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
       I_CALLBACK_PROGRAM              = SY-REPID
       I_CALLBACK_PF_STATUS_SET        = 'PF_STATUS'
       I_CALLBACK_USER_COMMAND         = 'GET'
       IS_LAYOUT                         = LAYOUT
         IT_FIELDCAT                     = FCAT
       I_DEFAULT                         = 'X'
        TABLES
          T_OUTTAB                          = ITAB.
    ENDFORM.                    " GRID
    REGARDS,
    SAKTHIVEL.VT

  • How to give  push button in alv report  output

    hi,
    my requirement is that , i have to give push button in alv report output(item level) not in application toolbar, i am using reuse_alv_grid_display FM, can any body provide me sample code
    regards,
    siva kumar

    have a look at this thread, also has a sample report at the end from Uwe Schieferstein.
    [button on alv list|How to add and program a pushbutton on ALV grid line;
    seems not to work try this:
    How to add and program a pushbutton on ALV grid line
    Edited by: Micky Oestreich on May 15, 2008 10:20 PM

  • How to inactive the push button on tool bar of alv report

    hi masters,
    i m working on the ALV interactive report, in this report i have to do 2 different operation on 2 screen.
    eg.- on first screen i have the push button for 'data' and on second screen i will have the push button for 'upload'.
    in this i don't want to give the 'upload' button on first screen and same i don't want to give the 'data' button on 2nd screen.
    i tried with using the 2 different gui status and 2 different PF-STATUS but its not working.
    anyone can tell me how i can deactivate the 'upload' button on first screen and how i can do same for 'get' buttton on 2nd screen.
    regards,
    vicky

    HI Vicky ,
                      if u want an interactive ALV report , there are lot of forums already having the solution for that , but let me give u the solution anyway.
    In the function module "REUSE_ALV_GRID_DISPLAY" , import parameters
         I_CALLBACK_PF_STATUS_SET          = 'FLIGHT'
         I_CALLBACK_USER_COMMAND           = 'BUTTON_CLICK'
    has to be supplied to this function module . The PF status is where u hav created the two buttons , that PF status has to be given here .If the user clicks on the button then it is handled by the form routines . Inside the sub-routine based on the button the user has selected u could perform the action.
    FORM FLIGHT    USING RT_EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'FLIGHT' EXCLUDING RT_EXTAB.
    ENDFORM.
    Here the "Flight" is the PF_status .
    FORM BUTTON_CLICK USING UCOMM type SY-UCOMM
                           SELFIELD type SLIS_SELFIELD.
      CASE UCOMM.
        WHEN 'BUTTON!' .
    write ur code for button 1.
      WHEN "BUTTON"
      *Write ur code for button2 .
    end case.
    endform.
    for any queries reply back.
    regards

  • How to add a push button in ALV Grid Top-of-page

    Is it possible to add a push button to the top-of-page in Alv grid display?if yes, then how? I am not using OO ABAP and am using reuse_alv_grid_display with top-of-page event.

    Hi,
    I am not sure whether we can add push button in top-of -page or not. But instead of that if you want to add button on toolbar as per your requirement then follow below link. it will useful.
    http://www.sap-img.com/abap/example-of-a-simple-alv-grid-report.htm
    Ram.

  • Push Button in Every record in ALV grid output

    Dear Experts,
    I need to print a push button in first column of every record in ALV grid output. How ?
    No OOPS concepts please.
    Thanks,
    Siva.

    For this requirement, you have to copy the standard PF status of the ALV output. Do as below :-
    1) Go to SE41
    2) Enter the program name as SAPLKKBL
    3) In the field status enter STANDARD_FULLSCREEN
    4) Click on STATUS button on the application toolbar.
    5) Enter the name of your Program & a new status name.
    6) Click on COPY.
    This way the standard status will be copied to the custom status & call the same status in your program using SET PF STATUS statement. Then double click on the custom status name & you will be navigated to SE41, there you can add you new button on the application tool bar & assign a function code, which you can program by enabling the export parameter I_CALLBACK_USER_COMMAND of the Function module REUSE_ALV_GRID_DISPLAY.
    Just a sample code snippet for your reference :-
    FORM USER_COMMAND USING L_UCOMM LIKE SY-UCOMM
    LS_SELFIELD TYPE SLIS_SELFIELD.
    CASE L_UCOMM.
    WHEN 'your function code goes here'.
    Do further processing.
    This way you will have the standard PF status alongwith your button as well.
    Edited by: Kumar Manas Mishra on Jan 29, 2010 1:03 PM

Maybe you are looking for