Using color statement

Hi All,
I have one internal table , in which i have only two fields of type char15.
I want to have the contents of first field in black color (by default it is black) and corresponding contents of second field in Red color.
Please help me in solving it such that second field contents are displayed in Red color on output screen.
We can use color 6 inverse on for red color text.but how to insert entries in table in red color or display them in red color.

Hi
Be more clear about your requirement. where exactly you want the color ? which kind of screen..
Check out below code..
REPORT ZTEST.
WRITE : SY-DATUM COLOR 6 INVERSE ON.
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

Similar Messages

Can we use Loop Statement for Ranges

Hi Friends,
I have a range say R_Range. I need to loop at each line item and get the values in another range R_New_Range, i have to count the number of items in R_new_range. How is it possible.
I know range is nothing but an internal table. So we can direcly use Move statements or so ...,
But my question is .....
My R_range has values as below
'I' 'EQ' '001'
'I' 'EQ' '002'
'I' 'BT' '003' '007'
'I' 'EQ' '008'
I have to move all these values to R_New_range and my count of items should be '8'.
How can i do that????????
Expecting ur answers....
Thanks in advance
Cheers,
R.Kripa.

hey friends,
Its nice to see the replies.... but i think i had confused u all with the question
Now i'll explain u all in detail ....
See i have 15000 projects ( eg., AAA111... ) and 100 GL accounts ( eg., 123443... ) .....
I have to get the costs from COSS and COSP tables for all the projects - GL account combinations which leads to some 1500000 entries ..... So it is giving me a SQL Dump "DBIF_RSQL_INVALID_RSQL" .........
Description of the Dump is
Error in the module RSQL accessing the database interface
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"GET_COSP_COSS" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL Statement violates a
restriction imposed by the database system used in R/3.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the available memory.
o ...
You can usually find details in the system log (SM21) and in the
developer trace of the work process (ST11).
If an error occurs the developer trace often informs you about the
current restrictions.
So now i want to fine tune the program so that the execution works perfectly and get me the values for all the data 1500000 :-|
Now :
My Projects are stored in the form of a range R_Range
I have to loop at this range and then process 100 records at a time and then again take other 100 records .... i'll count till 100 records by getting loopaing at the range and for each loop pass i'll increment the counter ....
I am clear till this .....
If record consist of 'EQ' option .... then ofcourse we can consider the total record to be 1 record and we can add 1 to counter ......
But if the record consist of 'BT' option ...... then how can we loop that and get the number of -low numbers in that range and add to my counter ????
Hope iam clear with my question
If not do revert back ....
Thanks in advance for the replies
Cheers,
R.Kripa.
My Doubt is ....

If we use DML statement in function then that function can be used inside s

if we use DML statement in function then that function can be used inside select query or any DML query?

select f from t2;I think you meant to query t1.
It works if the function is an autonomous transaction:
create or replace function f return number
is
PRAGMA AUTONOMOUS_TRANSACTION;
begin
    update t1 set c=2;
    commit;
    return 1;
end;
select f from t1But as Billy said why would you want to do DML this way. And this is not the way autonomous procedures should be used either.
An an answer to an interview question though nothing wrong with it.

How do we use if statement in labview?moreover can i use if statement inside for loop?

how do we use if statement in labview?moreover can i use if statement inside for loop?

The if statement in LabVIEW is the Case structure. You can find that on the Structures palette right next to the For Loop. If you're still on the same subject about terminating a for loop early, then what you do is enclose your functions inside the loop with a case statment and make one of the case's empty except for one or more constants that you might have to wire. Hopefully, the attached picture will explain what I mean. Also, as I mentioned in one of your other posts, I think this technique is not as good as using a while loop. The array in the attached example is the same size no matter what and you may have to handle stripping extra or invalid elements.
Attachments:
For_Loop_with_Case.jpg ‏21 KB

Can I use if statement in SQL???

Hello everyone.
I know that this is a silly question. The answer is no. Instead I should use decode function.
But what if I dont know all possible outcomes, can I still use decode function?
Also, I have created a view, in the where clause i want to use if statement. Is it possible to do?
Thanks in advance,
Sonya

here is the view that I created:
create or replace view import_shipment2
( order_no, cust_no,ORDER_SUFFIX,ship_addr1,ship_addr2, city,state,ZIP,country, terms_cd,shipvia_cd,
freight_cd, shipto_cdoehead,shipto_cdshipto,ship_name,ship_attn,order_status, org_unit_id, order_date,
estship_dt,confirm_status,gross_inv_value,phone,total_line_no,total_qty_order,total_qty_shipped,
total_qty_backordered,service,hold_cd,invno)
as select
to_char(c.order_no)||'_'||c.ORDER_SUFFIX, c.cust_no,c.ORDER_SUFFIX,d.ship_addr1,
     d.ship_addr2, b.city, b.state, b.zip_code,b.country, d.terms_cd,d.shipvia_cd,d.freight_cd, d.shipto_cd,b.shipto_cd,
     nvl(d.ship_name,b.shipto_attn), nvl2(d.ship_attn,b.shipto_attn,e.contact),d.order_status, d.org_unit_id,
     d.order_date, d.estship_dt, c.confirm_status, f.gross_inv_value ,nvl(d.shipto_recip_phone ,g.phone_no),
     sum(c.line_no),sum(c.qty_order),sum(c.qty_shipped),sum(c.qty_bo),d.shipvia_cd ,d.hold_cd,d.invno
from shipto_test b, oehead_test d,oedetl_test c, oesummary_test f ,CONTACT_MASTER_TEST e ,CONTACT_PHONE_TEST g
where c.order_no=d.order_no
and b.cust_no=d.cust_no
and b.shipto_cd=d.shipto_cd
and d.cust_no=f.cust_no
and d.order_no=f.order_no
and d.org_unit_id in ('110','120')
     and e.cust_no=d.cust_no
and e.shipto_cd= d.shipto_cd
and d.order_status in ('J','S')
and g.contact_id=e.contact_id
and g.phone_type='Business'
Group by
to_char(c.order_no)||'_'||c.ORDER_SUFFIX, c.cust_no,c.ORDER_SUFFIX,d.ship_addr1,
     d.ship_addr2, b.city, b.state, b.zip_code,b.country, d.terms_cd,d.shipvia_cd,d.freight_cd, d.shipto_cd,b.shipto_cd,
     nvl(d.ship_name,b.shipto_attn), nvl2(d.ship_attn,b.shipto_attn,e.contact),d.order_status, d.org_unit_id,
     d.order_date, d.estship_dt, c.confirm_status, f.gross_inv_value ,nvl(d.shipto_recip_phone ,g.phone_no),
     d.shipvia_cd ,d.hold_cd,d.invno;
I need to do the validation of the g.phone_type. Does phone number exist at all in table?
How do I all PL/SQL to this view??
Thanks once agin,
Sonya

Can we use Perform statement in start routine ,Form and endform.

Hi,
Can we use Perform statement in start routine ? Then write the ABAP code between Form and Endform.
Example : Can I use Perform ABC in start routine. Then define ABC at the end of start routine.
 Form ABC,
 ......<ABAP> code .....
 Endform.

Hi,
In BI 7.0 we have start routines defined using Class where you might be able to create your own performs, but in case of BW3.5 Start routines are defined using Form so there I don't think it will allow you to create one more form.
But you can surely try both the approaches.
Reards,
Durgesh.

Can we use return statement in procedure?

Can we use return statement in procedure or we can use more than one return statement in procedure?

HamidHelal wrote:
NOReally? Did you at least test it? You can use RETURN in procedure or in anonymous PL/SQL block. The only restriction is you can't specify return value:
SQL> begin
2      dbms_output.put_line('Before return');
3      return;
4      dbms_output.put_line('After return');
5 end;
6 /
Before return
PL/SQL procedure successfully completed.
SQL> create or replace
2    procedure p1
3      is
4      begin
5          dbms_output.put_line('Before return');
6          return;
7          dbms_output.put_line('After return');
8 end;
9 /
Procedure created.
SQL> exec p1;
Before return
PL/SQL procedure successfully completed.
SQL> begin
2      dbms_output.put_line('Before return');
3      return 99;
4          dbms_output.put_line('After return');
5 end;
6 /
    return 99;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00372: In a procedure, RETURN statement cannot contain an expression
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
SQL> create or replace
2    procedure p1
3      is
4      begin
5          dbms_output.put_line('Before return');
6          return 99;
7          dbms_output.put_line('After return');
8 end;
9 /
Warning: Procedure created with compilation errors.
SQL> show err
Errors for PROCEDURE P1:
LINE/COL ERROR
5/9      PL/SQL: Statement ignored
5/9      PLS-00372: In a procedure, RETURN statement cannot contain an
         expression
SQL> SY.

When to use prepared statement in java?

Hi all,
If we have query like select * from {tablename} (Here tablename is the variable) then will the use of prepared staement improve the performance? My guess is use of statement in this case is a better option rather than prepared statement as the tablename may change for every other query.I think are not useful if tablename changes.They are useful only when the where clause has dynamic values.

cantor wrote:
Are you sure that your approach is possible? The next example causes exception for me.
PreparedStatement ps = conn.prepareStatement("select * from ?");
ps.setString(1, "TABLE_NAME");
ps.executeQuery();
I didn't say that he should solve it in that way. He should create one prepared statement like this "select a, b, c from tablename1" and another prepared statement when he wants to execute "select d, e, f from tablename2"
>
And as I understand, this code will not improve perfomance (and even will not work). As I said it can.
Prepared statements make possible usage compiled queries inside DB. When DB gets prepared statement call, it need to parse it only once. And it can collect some statistic to improve execution plan. But when table name is not specified, this approach will not work.Yes it might. There are database drivers that can cache prepared statements and it's isn't likely that he executes that query on more than e.g. 20 tables?
The database can also cache compiled statements in a cache.
Kaj

Is it possible to skip the screen in BDC using IF statement.

Hi Friends,
I have written a report using BDC for tcode CO11 thru recording using CALL TRANSACTION.
Case 1:
If I go to transaction CO11 (screen number 100) and give the order number which has more than 1 operations to be partially confirmed and press ENTER a pop-up screen (screen number 140) appears where in I need to select the operation number and after selecting the required operation number it automatically takes me to another screen (screen number 150).
Case 2:
If I go to transaction CO11 (screen number 100) and give the order number which has only 1 operation to be partially confirmed and press ENTER it directly takes me to screen 150 skiping screen 140.
When I enter the order number which has more than 1 operations to be partially confirmed on my selection screen, my code is working fine as needed.
But, when I enter the order number which has 1 operation to be partially confirmed on my selection screen, it is giving me error in my BDCMSGCOLL saying that the screen 140 doesn't exist.
Is there any way, Can I skip screen 140 using IF statement?
My thoughts:
1. calling screen 100.
 After calling screen 100, I have put the pop-up operation numbers in an ITAB.
 DESCRIBE table lines ITAB <variable>.
 At NEW <order-field>.
 IF <variable> = 1.
2. calling screen 140. "I need some help here to skip the screen 140
 " Will this logic work?
 ENDIF.
 ENDAT.
3. calling screen 150.
Rest everything is working fine.
Will my above logic works correctly? I would appreciate if someone could help me with this.
Thanks in Advance.

Hi,
Try something like this:
1. Call Screen 100.
Check if screen 140 needs to be called depending on your custom logic. Lets say you populate a variable as 'X' if it needs to be called.
Then write:
if valiable = 'X'.
Call screen 140.
Enter Screen 140 details.
endif.
Call screen 150.
Here the 'Call Screen' is nothing but the code you extracted after BDC recording.
Thanks.
Ravi'

Using Select statement in IF condition?

hi all,
Can i use select statement in IF COndition in pl sql ?
eg like- if( select 1 from ASD) then
end if;

There is no way to do any kind of select statement inside if conditions.
Why don't test simple cases like this first?
An example to show it.
SQL> begin
2 if exists (select 1 from dual) then
3 dbms_output.put_line('ok');
4 end if;
5 end;
6 /
if exists (select 1 from dual) then
ERRORE alla riga 2:
ORA-06550: line 2, column 5:
PLS-00204: function or pseudo-column 'EXISTS' may be used inside a SQL
statement only
ORA-06550: line 2, column 2:
PL/SQL: Statement ignored
SQL> begin
2 if ( (select count(*) from dual) > 0 ) then
3 dbms_output.put_line('ok');
4 end if;
5 end;
6 /
if ( (select count(*) from dual) > 0 ) then
ERRORE alla riga 2:
ORA-06550: line 2, column 8:
PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternativ
ORA-06550: line 2, column 33:
PLS-00103: Encountered the symbol ")" when expecting one of the following:
. , @ ; for <an identifier>
<a double-quoted delimited-identifier> group having intersect
minus order partition start subpartition union where connect
SQL> begin
2 if ( 0 in (select count(*) from dual) ) then
3 dbms_output.put_line('ok');
4 end if;
5 end;
6 /
if ( 0 in (select count(*) from dual) ) then
ERRORE alla riga 2:
ORA-06550: line 2, column 12:
PLS-00405: subquery not allowed in this context
ORA-06550: line 2, column 2:
PL/SQL: Statement ignoredBye Alessandro

Tracking Memory usage on iOS using the Stats class

I've been checking memory usage on an app I'm developing for iOS using the Stats class https://github.com/mrdoob/Hi-ReS-Stats ( http://help.adobe.com/en_US/as3/mobile/WS4bebcd66a74275c3-315cd077124319488fd-7fff.html#WS 948100b6829bd5a61637f0a412623fd0543-8000).
I added the Stats class to my project and redeployed and, yikes, memory usage reported in Stats creeps up (pretty slowly) even when there's nothing happening in the app (just showing a loaded bitmap).
To try and track down the issue I created a project with a test class that extends Sprite with just this single call in the constructor :-
addChild( new Stats() );
I deployed it to the device to check that it didn't gobble any memory.
But I was Suprised to watch the memory usage creep up and up (to approx 5) before some garbage collection kicked in and takes memory back down. I left it running and then it crept up again to over 7.5 this time before being kicked back down to just below 3.
So 2 related questions that I'd appreciate any feedback/observations/thoughts on :-
1 - Is this normal (i.e. memory creeping up when there's nothing other than Stats in the project) ?
2 - What is the best way to monitor memory usage within an app ? Is Stats good enough - is Stats itself causing the memory usage ?
All the best guys !

Also see thread (http://forums.adobe.com/message/4280020#4280020)
My conclusions are :-
- If you run an app and leave it idle, memory usage gradually creeps up (presumably as memory is being used to perform calcs/refresh the display etc)
- Periodically the garbage collection kicks in and memory is brought back down
- This cycle could be in excess of 5 mins
Run with your real app and memory will increase and be released much more rapidly/regularly.
- It's probably worth performing initial checks by running on your desktop to iron out any initial problems

How to use perform statements in sap scripts

how to use perform statements in sap scripts . and pls send me one progam for this
thnaks
raja

Hi Raja,
PERFORM key work is used to include subroutine in sapscript form...
But the processing is lttle bit different form the one we use in ABAP.
Here the paramters passed to form is stored in internal table of name-value table. there are two table one for inbound parameter and other for outbound parameters.
Check out the example below to see how this is used..
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY PAGE.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY NEXTPAGE.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE OUT_PAR WITH KEY BARCODE.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = |. "First page
ELSE.
OUT_PAR-VALUE = ||. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = L. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Hope this is clear to understand...
Enjoy SAP.
Pankaj Singh.

Assigning values to 2 fields using sql statement

db11g , apex 4.0 and firefox 24 ,
hi all ,
i am trying to follow this tutorial to assign values to 2 items on a page using sql statement ,
and i am using the same sql statement the tutorial uses
select d.loc location, count(e.empno) num_employees from dept d, emp e where d.deptno = e.deptno(+) and d.deptno = :P3_DEPTNO group by d.loc -- btw , what does the "+" sign mean?
after the e.deptno in the where condition .
but i am facing this error
1 error has occurred
Wrong number of columns selected in the SQL query. See Help of attribute for details.
and it does not work with two columns in the select statement under any conditions , i tried to remove the group function and the group clause ,
it does not work unless i use only one column in the select statement ??
thanks

Pars
And how exactly is this rewrite of the sql statement resolving the OP's issue.
You are still using more than 1 column which will still result in the error message:
Wrong number of columns selected in the SQL query.
As mentioned in my earlier post APEX 4.0 (the version the OP is using) does not handle a sql statement with multiple columns for the dynamic action Set Value.
Which means the fastest and simplest solution is splitting up the dynamic action in multiple Set Value actions.
Using this plugin or upgrade to a newer apex version would also be a possibility.
Nicolette

Using return statement in jsp

Hi all,
I am using return statement in JSP page after a redirect to stop executing that page. If the data bean is not present then it must go to previous page. When this return statement is executed the previous page is displayed but url in browser remains same. Why it is so ?. Is there any other way to tell a JSP page to stop executing and redirect to another page.
rgds
Antony Paul

Hi Antony,
do you use the "forward()" method or the "redirect()" method???
rgds
Howy

Need help in this sql query to use Case Statement

hi All,
I have the below query -
SELECT DISTINCT OFFC.PROV_ID
,OFFC.WK_DAY
,CASE
WHEN OFFC.WK_DAY ='MONDAY' THEN 1
WHEN OFFC.WK_DAY ='TUESDAY' THEN 2
WHEN OFFC.WK_DAY ='WEDNESDAY' THEN 3
WHEN OFFC.WK_DAY ='THURSDAY' THEN 4
WHEN OFFC.WK_DAY ='FRIDAY' THEN 5
WHEN OFFC.WK_DAY ='SATURDAY' THEN 6
WHEN OFFC.WK_DAY ='SUNDAY' THEN 7
END AS DOW
,OFFC.OFFC_OPENG_TIME
,OFFC.OFFC_CLSNG_TIME
FROM GGDD.PROV_OFFC_HR OFFC
WHERE OFFC.PROV_ID='0000600'
WITH UR;
this query is bringing results in 6 differnt rows with opening and closing time for each day separately. I want to generate the data in one row with each day having opening and closing time, so for 7 days, total 14 columns with opening and closing time. But i am not able to do that using case statement.
can somebody help me in achieving that.
thanks,
iamhere

Hi,
Welcome to the forum!
That's called a Pivot .
Instead of having 1CASE expression, have 14, one for the opening and one for the closing time each day, and do GROUP BY to combine them onto one row.
SELECT       OFFC.PROV_ID
,       MIN (CASE WHEN OFFC.WK_DAY ='MONDAY'    THEN OFFC.OFFC_OPENG_TIME END)     AS mon_opn
,       MIN (CASE WHEN OFFC.WK_DAY ='MONDAY'    THEN OFFC.OFFC_CLSNG_TIME END)     AS mon_cls
,       MIN (CASE WHEN OFFC.WK_DAY ='TUESDAY'   THEN OFFC.OFFC_OPENG_TIME END)     AS tue_opn
,       MIN (CASE WHEN OFFC.WK_DAY ='TUESDAY'   THEN OFFC.OFFC_CLSNG_TIME END)     AS tue_cls
FROM        GGDD.PROV_OFFC_HR OFFC
WHERE       OFFC.PROV_ID     = '0000600'
GROUP BY offc.prov_id
;This assumes there is (at most) only one row in the table for each distinct prov_id and weekday. If not, what do you want to do? Post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data.
The staement above works in Oracle 8.1 and up, but there's a better way (SELECT ... PIVOT) available in Oracle 11. What version are you using? (It's always a good idea to include this when you post a question.)
Edited by: Frank Kulash on Jan 6, 2011 8:22 PM

Using color statement

Similar Messages

Maybe you are looking for