Using IPMI to Start,Stop Oracle VM server via OVMM fails
I have tried to manually start and stop an OVM server by using the ipmitool cmd from the environment of OVMM and it worked fine
To start:
ipmitool -U username -I lanplus -H xxx.xxx.xxx.xxx power off
And to stop:
ipmitool -U username -I lanplus -H xxx.xxx.xxx.xxx power on
so, I thought that the IPMI method works! However when I tried via the OVMM GUI environment, I got the following error. Actually the server stopped, most probably because of the acpi, but with an error, and after that It couldn't start again.
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 remote_power_off xxx xxx xxx xxx, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Failed to run: ipmitool -I lan/lanplus -H 192.168.1.5 ['power', 'off'] [Fri Jan 03 15:06:08 EET 2014
The server is a FUJITSU RX200 S5 and I am not sure if it is certified for OVM, but that shouldn't matter for the starting and stooping via the IPMI. Anyway has anyone else experienced similar problems? Is there a way to alter the ipmitool cmd options that OVMM uses?
Thanks,
Nikos
I have tried to manually start and stop an OVM server by using the ipmitool cmd from the environment of OVMM and it worked fine
To start:
ipmitool -U username -I lanplus -H xxx.xxx.xxx.xxx power off
And to stop:
ipmitool -U username -I lanplus -H xxx.xxx.xxx.xxx power on
so, I thought that the IPMI method works! However when I tried via the OVMM GUI environment, I got the following error. Actually the server stopped, most probably because of the acpi, but with an error, and after that It couldn't start again.
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 remote_power_off xxx xxx xxx xxx, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Failed to run: ipmitool -I lan/lanplus -H 192.168.1.5 ['power', 'off'] [Fri Jan 03 15:06:08 EET 2014
The server is a FUJITSU RX200 S5 and I am not sure if it is certified for OVM, but that shouldn't matter for the starting and stooping via the IPMI. Anyway has anyone else experienced similar problems? Is there a way to alter the ipmitool cmd options that OVMM uses?
Thanks,
Nikos
Similar Messages
-
Could not start the Oracle Forms Server
I am using Windows 2000 Professional
The Oracle Forms Server [Forms60Server] service failed to start due to the following error:
Access is denied.
Event ID: 7000
Source: Service Control Manager
Description: Could not start the Oracle Forms Server [Form60Server] service on a Local Computer.
Error 0005: Access is DeniedDescription:
I Installed Oracle Forms6i and when i tried to run web test form I got this :
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Description:
Application popup: ifcgi60.exe - Unable To Locate DLL : The dynamic link library D2LA60.dll could not be found in the specified path C:\orant\tools\web60\cgi;.;C:\WINNT\System32;C:\WINNT\system;C:\WINNT;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem.
this missed file already exist in <Oracle Home>\Bin
directory, and if I copied it to the asked destination
it asks for more CORE40.dll and NLSRTL33.dll
and then those also copied then the screen disappears
Question : Why did this error occur, what went wrong
and how do I fix this problem
2)the other question is in Forms9iDS Version 9.0.2.7.0 I am getting this error
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Description:
The OracleOraHome9iAgent service failed to start due to the following error:
Access is denied.
FRM-92060 :Failed to connect to the server
Bad machine specification :/forms90/190servlet:-1
Any Suggestion will be appreciated -
How to start and stop Oracle Application Server from ANT
How to start and stop Oracle Application Server and Web application from ANT
Thanks in Advance.
ManiHi,
You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
For instance, in my case I use:
unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
You have to run it on the machine where the managed server was installed.
Best regards,
Raúl -
Auto Start/Stop Oracle Database Lintener DBConslone on Linux
Dear all
I have install oracle 10.2.0 on redhat 4.7 every time i have to start manualy.
it try with following scrip / process but database not starting automatically.
Please any one can provide steps for auto start and stop oracel services on RedHat 4.7
Once the instance is created, edit the "/etc/oratab" file setting the restart flag for each instance to 'Y'.
TSH1:/u01/app/oracle/product/10.2.0:Y
Next, create a file called "/etc/init.d/dbora" as the root user, containing the following.
#!/bin/bash
#chkconfig: 345 95 10
#description: init script to start/stop oracle database 10g, TNS listener, EMS and isqlplus
case $1 in
start)
su - oracle -c 'lsnrctl start'
su - oracle -c 'dbstart'
su - ora10g -c 'isqlplusctl start'
su - oracle -c 'emctl start dbconsole'
stop)
su - oracle -c 'emctl stop dbconsole'
su - oracle -c 'isqlplusctl stop'
su - oracle -c 'dbshut'
su - oracle -c 'lsnrctl stop'
restart)
su - oracle -c 'emctl stop dbconsole'
su - oracle -c 'isqlplusctl stop'
su - oracle -c 'dbshut'
su - oracle -c 'lsnrctl stop'
su - oracle -c 'lsnrctl start'
su - oracle -c 'dbstart'
su - ora10g -c 'isqlplusctl start'
su - oracle -c 'emctl start dbconsole'
esac
create service on linux
Actions >> System Settings >> Server Settings >> Services Then
Actions >> Add Service Then
Service Name = dbora Then Press Ok
chmod a+x /etc/init.d/dbora
Check is it running this service properly
service dbora stop
service dbora start
showing error
:bad interperter : no such file or directory
Please forward me process/steps for auto start/stop oracel services:bad interperter : no such file or directorymeans that it could not find the interpreter which should be used to interpret the script.
most probably this is caused by the shebang (#!/bin/bash)
the default location of bash on RHEL (OEL/CentOS) is /bin/bash, which means that the shebang looks correct.
can you make the shebang:
#!/bin/bash -xso shelltracing is put on and execute script again?
this will make clear if it is the shebang in your script, or in another script. -
How to Start / Stop Oracle Applications
How to Start / Stop Oracle Applications.
Oracle Applications Services (TCF, ConcManagers, Metric, Forms, Reports etc...) TnsListner & Oracle Service (DB) are started when the Server is started.
What is the sequential Order to Start / Shutdown services, Listener & DB.
Best regards,hi
there is no hard coded rule on which service should be started first.
the basic thing is concurrent manager uses database for starting, so i advice you the following sequence:
1. start the database
2. start the database listener
3. Apache server
4. forms server
5. report server
6. concurrent manager
and shutdown in the reverse order
simple
regards
srinivas -
Start/Stop Weblogic Admin Server
Hello,
I have installed Forms 11g in my home Pc, so is it possible to Start/Stop Weblogic Admin Server and the Dos window that appears, not to ask me about username and password?
I mean like a bat file (script), to enter the username and password in a text file
if yes, also the same in WLS_FORMS?
Thank you.Starting an Administration Server with a Startup Script
An Administration Server is a WebLogic Server instance that maintains configuration data for a domain. In a development environment, it is usually sufficient to start an Administration Server and deploy your applications directly onto the Administration Server. In a production environment, you create Managed Servers to run applications. For more information about Administration Servers and Managed Servers, see "Understanding WebLogic Server Domains" in Understanding Domain Configuration for Oracle WebLogic Server.
You can start an Administration Server with a default startup script or create your own. To start an Administration Server with the WebLogic Server-included startup script:
If you have not already done so, use the Configuration Wizard or WebLogic Scripting Tool (WLST) to create a domain.
See Creating Domains Using the Configuration Wizard or "Creating Domains Using WLST Offline" in Oracle WebLogic Scripting Tool.
Open a shell (command prompt) on the computer on which you created the domain.
Change to the directory in which you located the domain.
By default, this directory is MW_HOME\user_projects\domains\DOMAIN_NAME, where DOMAIN_NAME is the root directory of the domain. (The name of this directory is the name of the domain.)
Run one of the following scripts:
bin/startWebLogic.cmd (Windows)
bin\startWebLogic.sh (UNIX and Windows. On Windows, this script supports the MKS and Cygnus BASH UNIX shell emulators.)
Note:
If you use a Configuration Wizard template that is provided by WebLogic Server, your domain directory includes a start script named startWebLogic. If you use a domain template from another source, the wizard might not create a start script, or it might create a script with a different name. The template designer determines whether the wizard creates a start script and the name of the script.
The startWebLogic script does the following:
Sets environment variables by invoking DOMAIN_NAME\bin\setDomainEnv.cmd (setDomainEnv.sh on UNIX), where DOMAIN_NAME is the directory in which you located the domain; for example, WL_HOME\user_projects\domains\DOMAIN_NAME, and where WL_HOME is the location in which you installed WebLogic Server.
Invokes the java weblogic.Server command, which starts a JVM that is configured to run a WebLogic Server instance.
When the server successfully completes its startup process, it writes the following message to standard out (which, by default, is the command window):
<Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Starting an Administration Server from the Windows Start Menu
When you create an Administration Server on a Windows computer, the Configuration Wizard creates a shortcut on the Start Menu for starting the server (User Projects > DOMAIN_NAME > Start Admin Server for WebLogic Server Domain).
The command that the Configuration Wizard adds to the Start menu opens a command window and calls the startup script that is described in Starting an Administration Server with a Startup Script. When the server has successfully completed its startup process, it writes the following message to standard out (which, by default, is the command window):
<Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Mark this helpful/correct to help others too -
Script Start/Stop Oracle Applications Services
Hi
I am constructing some scripts to stop or start some Oracle Applications services (APP, Apache, DB, Construct Manager, discover, forms, etc)
I now that are some script in the folder \viscomn\admin\scripts\, but my questions are, what services must I stop/start first?? The APP?? Then the BD vision?? Then apache?? Or first BD, discover, apache, app, etc?
Please can anyone help on this? Tank you
JailBreakHi
Tank you for your reply’s.
Yes i will use the Oracle scripts to stop and start services.
But when the Network Administrator shutdown the server, he must shut down some services, and I will include this scripts in the main script. But my dough was what services will stop first.
The IAS services don’t need to be started?? My IAS service are all stopped and if I start Apache Server Service first, the IAS HTTP Server service don’t start. I must start IAS HTTP Server first, then start apache server. IF not give an error and the service don’t start. But then after the Apache Server will stop by itself.
And some times the Oracle script doesn’t start the Concurrent Manager Service. I must start it manually.
My services that are started are:
Oracle Apache Server
Oracle Fulfiment Server
Oracle Metrics Server
Oracle Metrics Client
Oracle Reports Server
Oracle Concrrent Manager
Oracle Discover Server
Oracle Forms Server
Oracle OracleVIS_db920_RDBMSTNSListenerVIS(from the OracleVIS_db920_RDBMSTNS this is the only service that are started, the others are stopped. Is this correct?)
Oracle OracleVISOra806_2TNSListener80APPS_VIS
This is all the services that are started.
But I have a problem in my discover. When I login to the applications as a user, and pick some options (that will open discover) it gives me one error.
Locator unable to start session altranitsgp.altranit.pt_8000OracleDiscovererSession4. - Hint: An administrator can further diagnose connection problems by running the "checkdiscoverer" script under <ORACLE_HOME>/806/discwb4/util.
But I have started the Discover Server and tested, and all went ok. The problem is in the applications. I don’t know why.
Any one can give a hand on these issues?
Tank in advance. -
Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
LaurentI strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf -
Error while starting the Oracle BI Server
Hi ,
I am getting the services.msc error while starting the Oracle BI Server as -
Error handling the control request.
Please help me out ..
Thanks and Regards ,It is actually Windows services error that I am facing ....
while starting the BI server after making any changes to NQS config file ..
Could not start the Oracle BI Server service on Local Computer
Error 1064: An exception occured in the service when handling the control request
Message was edited by:
user460211
Message was edited by:
user460211 -
How to start/stop oracle 9i databases in aix
please provide me details steps of start/stop oracle 9i database in aix . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
Edited by: apusumit on Jun 10, 2011 5:32 AM
Edited by: apusumit on Jun 10, 2011 5:35 AM
Edited by: apusumit on Jun 18, 2011 7:01 AMapusumit wrote:
please provide me details steps of start/stop oracle 9i database . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
Edited by: apusumit on Jun 10, 2011 5:32 AMrefer the link:-
http://www.puschitz.com/InstallingOracle9iRAC.shtml#StartingAndStoppingOracle9iClusterManager
also,
please post the question in
Forum Home » Grid Computing » Real Application Clusters
Good Luck. -
Starting of Oracle HTTP Server
Hi , I've installed Oracle 9i database, unable to start my Oracle HTTP Server. Mine is a standalone Win2k system, not connecetd to the Internet, doesnt have a modem either. How do i start my Oracle HTTP Server?
Thanks in advance,
Rajopen your Windows Services (Settings->Control Panel->Administrative Tools)
and verify your whether your service OracleOraHomexxHTTPServer is started or not. If not you can start it from there.
hope it helps... -
I have problem to install SOA suite
Indeed it installs and when it come to complete configuration assistants it shows that one of my components failed.
i tried several times to uninstall/install the SOA suite and it failed in the same stage.
can some one give me some hints?
here is the log file enty:
Trying to check if config_order xml is present
The scratch path is =H:\temp\OraInstall2006-11-23_02-08-30AM
The config_order.xml is null
Lowering thread priority for config tool
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Application Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'F:\dev\oracle\OracleAS_10\jdk\bin\java -cp F:\dev\oracle\OracleAS_10\j2ee\home\applications\ascontrol\ascontrol\WEB-INF\lib\ascontrol.jar;F:\dev\oracle\OracleAS_10\j2ee\home\applications\ascontrol\ascontrol\WEB-INF\lib\log4j-core.jar;F:\dev\oracle\OracleAS_10\jlib\oraclepki.jar;F:\dev\oracle\OracleAS_10\jlib\ojmisc.jar; oracle.sysman.ias.studio.installer.ASControlConfigAssistant -sso true -j2eeinstance home -username oc4jadmin -password *Protected value, not to be logged* -oraclehome F:\dev\oracle\OracleAS_10'
Start output from spawned process:
java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Exception in thread "main"
End output from spawned process.
Configuration assistant "Oracle Application Server Configuration Assistant" failed
java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Exception in thread "main"
Result code for launching of configuration assistant is: 1
The OUICA command is launched from F:\dev\oracle\OracleAS_10\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to F:\dev\oracle\OracleAS_10
Configuration directory is set to F:\dev\oracle\OracleAS_10\cfgtoollogs. All xml files under the directory will be processed
-----------------------------------------------------------------------------please tell me what is Oracle Application Server Configuration Assistant and what effect it will have on my server.
thanksHi all,
I've found a solution to this problem. So far I've been trying the installation through MSTSC by taking administrative control (through /console option). Later, I tried my luck by installing it through Net Meeting which proved to be successful.
Hope you can try the same and ged rid of the installation issues. -
How to start / stop Oracle Directory Integration service (Win 2k3 Server)
I'm running a standard OAS 10.1.2.0.2 instance on Windows Server 2k3, and am having trouble starting and stopping ODISRV instances. Well, at least I think I am, because I can't find any way of telling if they're actually running.
The System Components in the Application Server Control web page shows the following to be all up and running:
HTTP_Server
Internet Directory
OC4J_SECURITY
Single Sign-On:orasso
Management
Which is backed up by opmnctl:
opmnctl statusProcesses in Instance:
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 1988 | Alive
OC4J | OC4J_SECURITY | 5008 | Alive
HTTP_Server | HTTP_Server | 2800 | Alive
OID | OID | 4956 | Alive
In the Application Server Control, when I select the Internet Directory instance, and then the Status for Directory Integration, it shows two Directory Integration Servers, which correspond to instances I've previously started using oidctl. However, I cannot see any odisrv processes running. The only relevant processes appear to be 2 x oidldapd, 1 x oidmon, and 2 x opmn.
When I try to stop these using oidctl, the command returns no errors, but these instances do not go away. There is also only one odisrv log file from a week or so ago that does not appear to get updated. It is very possible that I stuffed the parameters of these instances up when I started them, so they may well be in an invalid statr at the moment.
So I have the following questions:
- Is there anyway I can clear all these instances out back to a clean slate to start again?
- Should I be using opmnctl to start an ODISRV instance, or should I somehow configure it to run under opmnctl startall?
Thanks,
BarneyOnce you register the integration server, OIDSRV should auto start using oidmon.
To cleanup
-- opmnctl stopall
-- delete entries from ods.ods_process table, if there are any.
-- Restart instance using opmnctl -
Using opmn to start/stop hub repo and adapters
Also posted as a thread on the OracleAS General forum, I'm hoping the duplication will cover both areas of expertise. Apologies if I offend.
"Configuring custom process with OracleAS 10g Release 2 (10.1.2) "
A Metalink note kindly informed me that I could use OPMN to start and stop Interconnect hub and adapter processes. The hyperlink sent me to the OPMN documentation and that's where the fun started!
So far I have only tried to add the repository as an ias-component and this is how the section of the opmn.xml file looks.
<ias-component id="HUBDEV3" status="enabled" id-matching="true">
<process-type id="HUBDEV3-repository" module-id="CUSTOM">
<environment>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/integration/interconnect/lib/oai.jar"/>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/jdk/jre/lib/i18n.jar" append="true"/>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/jdbc/lib/classes12.jar" append="true"/>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/jdbc/lib/nls_charset12.jar" append="true"/>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/jlib/oraclepki.jar" append="true"/>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/jlib/ojpse.jar" append="true"/>
<variable id="PATH" value="/du01/OAI/oracleas1/jdk/jre/bin" append="true"/>
<variable id="LD_LIBRARY_PATH" value="/du01/OAI/oracleas1/lib32" append="true"/>
</environment>
<process-set id="repo" numprocs="1">
<module-data>
<category id="start-parameters">
<data id="java-parameters" value="-server -Drepo=InterConnectRepository -DORBdisableLocator=true -mx512m -ms8m oracle.aob.repository.Repomain"/>
<data id="jar-file" value="/du01/OAI/oracleas1/integration/interconnect/lib/oai.jar"/>
</category>
<category id="stop-parameters">
<data id="java-parameters" value="-server -Drepo=InterConnectRepository -DORBdisableLocator=true -mx512m -ms8m oracle.aob.repository.Repomain -shutdown"/>
<data id="jar-file" value="/du01/OAI/oracleas1/integration/interconnect/lib/oai.jar"/>
</category>
</module-data>
<start timeout="600"/>
<stop timeout="120"/>
</process-set>
</process-type>
</ias-component>
This parses okay and when I call opmnctl status I get the following:
$ opmnctl status
Processes in Instance: hubASDEV3.xxxxxxxxxx
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 27533 | Alive
dcm-daemon | dcm-daemon | 217 | Alive
OC4J | home | 27534 | Alive
OC4J | jacada | 27535 | Alive
HUBDEV3 | HUBDEV3-repository | N/A | Down
I tried opmnctl startproc ias-component=HUBDEV3 & opmnctl startproc process-type=HUBDEV3-repository but both retun the following message:
opmn id=crm-drtest:6200
no enabled components for this request
Can anyone advice on where and why I'm going wrong?
Sometimes you wish you'd never seen the hint in the first place!!Well, I now have a working solution.
The section from the opmn.xml file now reads (the major changes in bold):
<ias-component id="HUBDEV3" status="enabled" id-matching="true">
<process-type id="HUBDEV3-repo" module-id="CUSTOM" working-dir="/du01/OAI/oracleas1/integration/interconnect/repository">
<environment>
<variable id="JAVA_HOME" value=""/>
<variable id="THREADS_FLAG" value="native"/>
<variable id="PATH" value="/du01/OAI/oracleas1/jdk/jre/bin" append="true"/>
<variable id="LD_LIBRARY_PATH" value="/du01/OAI/oracleas1/lib32" append="true"/>
</environment>
<process-set id="repo" numprocs="1">
<module-data>
<category id="start-parameters">
<data id="start-executable" value="/du01/OAI/oracleas1/jdk/jre/bin/java"/>
<data id="start-args" value="-server -Drepo=InterConnectRepository -DORBdisableLocator=true -mx512m -ms8m -classpath /du01/OAI/oracleas1/integration/interconnect/lib/oai.jar:/du01/OAI/oracleas1/jdk/jre/lib/i18n.jar:/du01/OAI/oracleas1/jdbc/lib/classes12.jar:/du01/OAI/oracleas1/jdbc/lib/nls_charset12.jar:/du01/OAI/oracleas1/jlib/oraclepki.jar:/du01/OAI/oracleas1/jlib/ojpse.jar oracle.aob.repository.Repomain"/>
</category>
<category id="stop-parameters">
<data id="stop-executable" value="/du01/OAI/oracleas1/jdk/jre/bin/java"/>
<data id="stop-args" value="-classpath /du01/OAI/oracleas1/integration/interconnect/lib/oai.jar:/du01/OAI/oracleas1/jdk/jre/lib/i18n.jar:/du01/OAI/oracleas1/jdbc/lib/classes12.jar:/du01/OAI/oracleas1/jdbc/lib/nls_charset12.jar:/du01/OAI/oracleas1/jlib/oraclepki.jar:/du01/OAI/oracleas1/jlib/ojpse.jar oracle.aob.repository.Repomain -shutdown"/>
</category>
</module-data>
<start timeout="600"/>
<stop timeout="120"/>
</process-set>
</process-type>
<process-type id="HUBDEV3-adapters" module-id="CUSTOM" working-dir="/du01/OAI/oracleas1/integration/interconnect/adapters/CRMAPPS">
<environment>
<variable id="JAVA_HOME" value=""/>
<variable id="THREADS_FLAG" value="native"/>
<variable id="PATH" value="/du01/OAI/oracleas1/jdk/jre/bin" append="true"/>
<variable id="LD_LIBRARY_PATH" value="/du01/OAI/oracleas1/lib32" append="true"/>
</environment>
<process-set id="crmapps" numprocs="1">
<environment>
<variable id="LANG" value="en_US"/>
</environment>
<module-data>
<category id="start-parameters">
<data id="start-executable" value="/du01/OAI/oracleas1/jdk/jre/bin/java"/>
<data id="start-args" value="-server -Dadapter=CRMAPPS -DORBdisableLocator=true -ms8m -mx512m -classpath :/du01/OAI/oracleas1/integration/interconnect/lib/oai.jar:/du01/OAI/oracleas1/jdk/jre/lib/i18n.jar:/du01/OAI/oracleas1/jdbc/lib/classes12.jar:/du01/OAI/oracleas1/jdbc/lib/nls_charset12.jar:/du01/OAI/oracleas1/rdbms/jlib/aqapi.jar:/du01/OAI/oracleas1/rdbms/jlib/jmscommon.jar:/du01/OAI/oracleas1/lib/xmlparserv2.jar:/du01/OAI/oracleas1/jlib/oraclepki.jar:/du01/OAI/oracleas1/jlib/ojpse.jar:/du01/OAI/oracleas1/jdk/jre/lib/ext/mail.jar:/du01/OAI/oracleas1/jdk/jre/lib/ext/activation.jar:/du01/OAI/oracleas1/integration/interconnect/lib/UserDefinedTransforms.jar: oracle.oai.agent.service.AgentService"/>
</category>
<category id="stop-parameters">
<data id="stop-executable" value="/du01/OAI/oracleas1/jdk/jre/bin/java"/>
<data id="stop-args" value="-mx64m -classpath /du01/OAI/oracleas1/integration/interconnect/lib/oai.jar oracle.oai.agent.proxy.ShutdownAgent persistence/Agent.ior"/>
</category>
</module-data>
<start timeout="600"/>
<stop timeout="120"/>
</process-set>
</process-type>
</ias-component>
Once I added the working-dir attribute to the process-type tag, things began to fall into place. working-dir is set to the directory location of the repository start script and I repeated the same for the crmapps adapter. My biggest clue came when I added the crmapps adapter to the opmn.xml and when I tried to start it, the log file indicated that it couldn't find the adapter.ini file. The rest came naturally after that breakthrough.
It needs a bit of rejigging but so far, results are good.
Message was edited by:
Devious Scully -
Problem starting the Oracle Management Server service
Hi
I have configured the Oracle Management Server (since I need to use the Jobs functionality) in an Oracle 9i home installed in my desktop. Then I have tried to put the service to work; it always starts and stops at once; the message also states that some services are automatically shutted down when they are not in use...
Also, I noticed that I cannot use the typical option when creating the repository for OMS because it does not accept the domain my computer is in (dgsaude.min-saude.pt) since it seems to be an invalid domain name...
I am a little under pressure here...Please helpThank you very much; I will take a look at documentation; anyway, just a question I am in doubt about..the tasks I need to automate have to do with deleting the contents of some local tables, then run some SqlPlus queries to fill those tables again (I run them locally by using a database link to another database); final tables will be connected to an www site and refreshed. As I have understood, I can do this using DBMS_JOBS (for which, I think, I would need to learn some PL/SQL...) or configure the OMS to do it (which, as you said, can be a bit of a pickle in the start...). Given the situation, which one of these tools would you advise me to use?
Thank You
Andre
Maybe you are looking for
-
Two users on the same iMac and the same iTunes library, howto?
hi to all, i'm trying without success to create a itunes libray on an external drive. I have two users on the iMac, both has different idevices, but i'd like the can access to the same music library, apps, books ecc. How can realize that?
-
I accidentally cut photo's from an event instead of copy but I posted in a new event. I closed the new event and opened it back up. when I opened up the new event my photo's were all there. I copied the photo's from new event to put back into origin
-
How to Uninstall Adobe AIR on Mac OS X 10.9.3
When i open the Adobe AIR Uninstaller it only says that this adobe air version is already installed on the system. How can i uninstall it?@@@@
-
Tight VNC / Vista ...black sreen when accesed from work
i set up tightvnc on my macbook pro running vista ...when i arrived at work and accesed my laptop at home all i saw was a black screen anyone else have this problem ?
-
SSRS How to grant BROWSE permission for reports for all the application users?
Hello, Problem Statement I need to allow all of my application users to browse the SSRS reports via logging onto the Report Manager and to some other I even want them to use Report Builder to modify & upload the report. How could I achieve this. Envi