Using JAXR to query Data - from JUDDI

Dear friends -
I am beginning to work on juddi.
I am trying to Query the registry from my code to get some data. But I am unable to do so.
I am getting the following exception:-
log4j:WARN No appenders could be found for logger (javax.xml.soap.MessageFactory).
log4j:WARN Please initialize the log4j system properly.
javax.xml.registry.JAXRException: javax.xml.bind.JAXBException
- with linked exception:
[javax.xml.soap.SOAPException: Cannot find MessageFactory implementation]
     at com.sun.xml.registry.uddi.Processor.processRequestJAXB(Unknown Source)
     at com.sun.xml.registry.uddi.UDDIMapper.findOrganizations(Unknown Source)
     at com.sun.xml.registry.uddi.BusinessQueryManagerImpl.findOrganizations(Unknown Source)
     at FindBusinessInfo.main(FindBusinessInfo.java:38)
Caused by: javax.xml.bind.JAXBException
- with linked exception:
[javax.xml.soap.SOAPException: Cannot find MessageFactory implementation]
     at com.sun.xml.registry.common.util.MarshallerUtil.jaxbMarshalObject(Unknown Source)
     ... 4 more
Caused by: javax.xml.soap.SOAPException: Cannot find MessageFactory implementation
     at javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:111)
     ... 5 more
My code is below:-
import javax.xml.registry.*;
import javax.xml.bind.*;
import javax.xml.soap.*;
import java.io.IOException;
import java.io.InputStream;
import java.util.*;
public class FindBusinessInfo extends MessageFactory{
     public static void main(String[] args) {
          try {
               Properties props = new Properties();
               props.setProperty("javax.xml.registry.queryManagerURL",     "http://uddi.ibm.com/testregistry/inquiryapi");
               props.setProperty("javax.xml.registry.lifeCycleManagerURL",     "https://uddi.ibm.com/testregistry/publishapi");
               props.setProperty("com.sun.xml.registry.http.proxyHost","india.hp.com");
               props.setProperty("com.sun.xml.registry.http.proxyPort","8080");
               //props.setProperty("com.sun.xml.registry.https.proxyHost","myhost.mydomain");
               //props.setProperty("com.sun.xml.registry.https.proxyPort","8080");
               ConnectionFactory connFactory =     ConnectionFactory.newInstance();
               connFactory.setProperties(props);
               Connection connection = connFactory.createConnection();
               System.out.println("connection obtained"+connection.toString());
               RegistryService rs = connection.getRegistryService();
               BusinessQueryManager bqm = rs.getBusinessQueryManager();
               BusinessLifeCycleManager blcm = rs.getBusinessLifeCycleManager();
               String qString = "j";
               Collection findQualifiers = new ArrayList();
               findQualifiers.add(FindQualifier.CASE_SENSITIVE_MATCH);
               Collection namePatterns = new ArrayList();
               namePatterns.add("%" + qString + "%");
//               Find orgs with name containing qString
               BulkResponse response =     bqm.findOrganizations(findQualifiers, namePatterns, null, null, null, null);
               Collection orgs = response.getCollection();
          /*     ClassificationScheme cScheme =     bqm.findClassificationSchemeByName(null, "ntis-gov:naics");
               Classification classification =     blcm.createClassification(cScheme,"Snack and Nonalcoholic Beverage Bars", "722213");
               Collection classifications = new ArrayList();
               classifications.add(classification);
//               make JAXR request
               BulkResponse response = bqm.findOrganizations(null,     null, classifications, null, null, null);
               Collection orgs = response.getCollection();
               System.out.println("orgs = "+orgs.toArray());
          } catch (JAXRException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
     public SOAPMessage createMessage() throws SOAPException {
          // TODO Auto-generated method stub
          return null;
     public SOAPMessage createMessage(MimeHeaders arg0, InputStream arg1) throws IOException, SOAPException {
          // TODO Auto-generated method stub
          return null;
Please Help..
Thanks very much!
Vishal

API's are Applicaiton programming interfaces which will be present in any application. These are the means for integrating the system with the rest in the landscape.
You can find BAPI related information at
www.sap-img.com
www.sapgenie.com
Regards,
Ravi

Similar Messages

  • Use evdre to query data from a SQL View

    Hi all
    I believe that it is possible to use evdre to query data from a SQL View. If this is possible then how does one go about setting it up in the evdre options (assuming that the view has already been created)?
    Regards,
    Byron

    Byron,  perhaps this is no longer supported, it might be worth opening up a case at service.sap.com on this.  However, I did find the following on Page 11 of the "Usages and Considerations of EVDRE" pdf file.  This doc is imbedded in the helpfile for BPC 7 SP5 (which was released in August of 2009, well after note 1315011 was last updated.
    It looks like you are limited to one custom view per application, since you have to name the view in a parameter at the APPLICATION level.  Go into BPC Administration, login to the application related to the custom view, choose "Set Application Parameters" and enter the name of the view to the Application Parameter called "EVDRE_QUERYVIEWNAME"  If it is not listed, go ahead and create it at the bottom of the Application parameter screen.
    Also:  I interpreted the following info from Page 10 of the same doc:
    In your EVDRE, set the following options:
    QueryEngine: MANUAL
    QueryType:  enter either NEXJ  OR TUPLE  see below:
    NEXJ  - Use two-dimensional queries using the nonemptycrossjoin function
    TUPLE  - Use two-dimensional queries using tuples"
    And I'm assuming you'd enter a Y for the following two parameters:
    QueryViewName
    "..to enforce the query engine to use a used-defined SQL view of the fact tables, when trying to read the values using SQL queries. This option is typically used in conjunction with the SQLOnly option (see below). "
    Option SQLOnly
    "..to enforce the query engine to only execute SQL queries, when reading data. This can be achieved using this option."

  • How to query data from Oracle, MySQL, and MSSQL?

    For an environment consisting of Oracle 11g/12c enterprise edition, MySQL 5.7 community edition, and MSSQL 2008/2012 stanard/enterprise edition, is there any major issue using DG4ODBC to query data from all 3 platforms?
    Is there other free alternatives?
    If the queried data is mostly contained in MySQL or MSSQL, will it be more efficient to query from MySQL or MSSQL?
    If yes, any suggestion of how to do it in those platforms? I know MSSQL can use linked server but it is quite slow.

    mkirtley-Oracle wrote:
    Hi Ed,
        It is semantics.  By multiple instances I mean you have the gateway installed in an ORACLE_HOME which has 1 listener. However, if you are connecting to different non-Oracle databases or different individual databases of that non-Oracle database then you need multiple gateway instances for each database being connected.  I did not mean that you need a gateway installed in a separate ORACLE_HOME for each non-Oracle database to which you are connecting.
    Each of these would have a separate instance file within that ORACLE_HOME/hs/admin directory with the connection details for the non-Oracle database to which that instance connects.. So, you would have -
    initgtw1.ora - connects to MySQL
    initgtw2.ora - connect to SQL*Server northwind database
    initgtw3.ora - connect to SQL*Server test database
    etc
    etc
    Each of these instances would have a separate entry in the gateway listener.ora.
    In MOS have a look at this note -
    How To Add A New Database or Destination To An Existing Gateway Configuration (Doc ID 1304573.1)
    Regards,
    Mike
    Ah yes, we are in agreement, it was just semantics.  Thanks.

  • Query data from MS SQL db through Oracle ? By using JAVA ?

    Hi folks,
    I would like to sync our one table in oracle db with table in different system, stored in MS SQL database.
    What would be the easiest option for connection from Oracle to MS SQL db to be able to query data from MS SQL through some Oracle package?
    If possible, I would like to keep all "tricky steps" within Oracle database. I heard about option with Java, but so far we have no experience with java in Oracle.
    Our database: Oracle 11g Database Standard Edition One
    Many thanks,
    Tomas

    C:\Users\tomeo>dg4pwd HELIOS
    ORACLE Gateway Password Utility
    Constructing password file for Gateway SID HELIOS
    For user account SYSTEM
    OPW-00001: Unable to open password-file (RC=0)
    C:\Users\tomeo>

  • Not able insert ,query data from forms

    hi,
    I am not able to insert data or query data from forms(10g devsuite).getting error frm-40505,frm 40508 .i am able to insert and select record from sql plus.the block ihave created is control block .it is connected to the table using the properties.
    should i do anything to insert record.please help

    the block ihave created is control block .it is connected to the table using the properties.A Control Block, by definition, is a non-database block. This means the block is not directly connected to a table so you have to manually display data in the block and any DML you want to perform on data in this block you must do manually as well.
    There are four database objects you can base your database block on; 1) a Table, 2) a View, 3) From Clause Query (basically an In-line View), and 4) a database stored procedure. I recommend you use one of these four methods rather than manually display your data.
    Craig...

  • Use JDBC to query data for JSP Report

    Hi all,
    I met a trouble when use JDBC to query data,
    it can show data in report builder, but get error when call from url for exxample: http://localhost:8889/reports/TestJDBCReport.jsp
    found error message:
    javax.servlet.jsp.JspException: rwlib-1: REP-4100: Failed to execute data source. REP-0069: Internal error JDBCPDS-62000:Invalid sign-on parameter P_JDBCPDS
    javax.servlet.jsp.JspException: rwlib-1: REP-4100: Failed to execute data source.
    REP-0069: Internal error
    JDBCPDS-62000:Invalid sign-on parameter P_JDBCPDS
    anyone know pls help me
    Many thanks

    As a general rule, it's a good idea to separate the
    presentation (JSP and HTML) from the business rules
    (database access). I know you didn't do that on the
    AS/400, you had display files and business logic in
    the same program (at least, we certainly do in ours),
    but it's a good policy to follow in the web world.
    That means, don't put your database access code in
    the JSP. Other than that, it depends on the data.
    If you have simple data (e.g. customer's name and
    d address) then a Java bean would suffice. If you
    have complex data (e.g. customer's payment history)
    then a bean still might suffice. You would use an
    "include" if you had some data (static or dynamic)
    that you wanted to appear in several different pages
    in the same form.Thanks, I figured putting the code in the JSP was not the best way, but I wasn't sure about the other options.

  • Trying to query data from a view - ORA-01882 and ORA-02063 Errors

    Hey there,
    I tried to query data from a view that was provided by a colleague. This view works fine and gives correct data using PL/SQL Developer or SQLPLUS, but in SQL Developer, I get the following error:
    ORA-01882: Time zone region not found
    ORA-02063: preceding line from SYSTOOLS
    01882.00000 - "timezone region %s not found"
    * Cause: Specified reason name was not found
    * Action: Please contact Oracle Customer Support
    Vendor Code 1882
    Where comes this error message from?! SYSTOOLS is the database link.
    Can't see an obvious reason for this error.
    OS is Windows 2000 SP4, SQL Developer is v1.1.1.25 BUILD MAIN-25.14
    Regards,
    Thomas

    From Oracle Messages 'Cause and Action'
    http://www.oracle.com/technology/products/designer/supporting_doc/des9i_90210/cmnhlp72/messages/ora_messages.htm
    ORA-01882, 00000, "timezone region %s not found"
    Cause: The specified region name was not found.
    Action: Please contact Oracle Customer Support.
    Maybe invalid region in NLS_LANG?
    "select * from v$nls_parameters"
    Starting this script in all developer program and compared result...

  • Best Practice on querying Data from Database

    Hello and I was wondering what is the preferred and best practice for querying data from an SQL database inside a JSP page. Is it using the JSTL library or another method? Thanks

    It depends on the size of the application really.
    The "correct and preferred" approach in a large MVC app would be to have a seperate class that does all the database access, retrieving the data into java objects.
    Check out [url http://java.sun.com/blueprints/corej2eepatterns/Patterns/DataAccessObject.html] DAO pattern
    You then "save" the data into request/session attributes, and forward to a jsp page to render the result.
    Most approaches recommend a separation between JSP (the view) and SQL code.
    The JSTL sql tags are provided more for "quick and dirty" code applicable in small applications, or for fast prototyping. That approach is not really robust for large scale applications.
    Cheers,
    evnafets

  • Querying Data from 3rd Party System

    We would like to query data from a 3rd party (non-SAP) system.  Our BW is an MSSQL DB and the 3rd party is also an MSSQL DB.  We do not want to physically load the data from the external system we just want to use the BW query tools to display the data.
    Is this possible?  I thought this is what a Remote Cube would be used for but SAP's instructions on Remote Cubes are vague and confusing.
           1.      In BW, create a source system for the external system that you want to use.
           2.      Define the required InfoObjects.
           3.      Load the master data:
    ·        Create a master data InfoSource for each characteristic
    ·        Load texts and attributes
           4.      Define the RemoteCube
           5.      Define the queries based on the RemoteCube

    Hi Jon,
    SAP RemoteCube is an InfoProvider. This is a special RemoteCube that allows
    you to define queries with direct access to transaction data in other SAP systems. SAP RemoteCubes are defined on the basis of an InfoSource with flexible updating, and assume the characteristics and key figures of the InfoSource.
    Use/Data Flow
    Unlike with other RemoteCubes, it is not necessary to program extractors. The
    same extractors are used to select data in the source system that are also used when replicating data into the BW. When executing a query, each navigation step sends a request to the extractors for the assigned source systems. In addition, characteristics selection and selection criteria for these characteristics are transformed to fields in the transfer structure, in accordance with the transfer rules. They are transferred to the  extractor in this form. The delivered datasets run through the transfer rules in BW and are filtered once again in the query.
    In your case Remote cube can be an option .
    Cheers
    Raja

  • Query Data from other Oracle Database into current

    Hi all,
    I have to query data from another oracle database into the current oracle database. Because the customer has standard edition, I cannot use a pipe. I tried "SELECT column_name FROM external_oracle_db.schema.table WHERE column_name = 'column_value';" Unfortunately this does not work.
    Does anyone have a suggestion?
    Thanks
    Hans

    Have you tried with Database links?
    SELECT column_name FROM schema.table@external_oracle_db WHERE column_name = 'column_value';
    Satish

  • I would like to use DDE to send data from a Lookout Server to an Excel

    Hello National Instruments,
    I would like to use DDE to send data from a Lookout Server to an Excel
    Spreadsheet.
    I have Lookout 6.1 on a server connected to 4 client workstations
    The operating system on the server is Windows Server 2003 R2; Standard Edition;
    Service Pack 2
    I have opened DDE Share but after filing in Share Name; Static Application
    Name; Static Topic Name
    I get a message, "Can't bind to DSDM service"
    I also get this message when I press add a Share
    What are the steps to setting up this type of communications link?
    Thanks,
    David Lopez
    Scada Functional Analyst

    Ryan,
    I have followed the steps on the Knowledge Base "How do I use DDE To Send Data Across the Network To Excel From Lookout?" but what I am seeing is that the computer with excel (Computer B)hangs up displaying an hour glass continuously leaving me no option but to go into task manager to stop excel.  It appears to me that the dde share is not working properly on my windows xp where lookout resides or I do not have a certain service turned on.  I do have the DDE services turned on both computers.  I have my computer set up as computer A with Lookout and Process1 as the process with a pot set up as pot1.  On my computer (Computer A) I also have the dde share set up per the KB example.
    On computer B I have the dde services turned on and I am typing the following into an excel worksheet Cell  ='\\TAG23232\NDDE$'|'Process1$'!Pot1
    TAG 23232 is Computer A's Name
    Do you have any suggestions???

  • Trying to use FTP to get data from a different server

    Hi Friends,
        I have to use FTP to get data from a different server and upload it on SAP server. Now my problem is when I m trying to do ftp through command line it brings the file but with no data.
       Through ABAP program nothing is happening.
    Here's my code--
      V_PASSWORD = 'test@123'.
      V_PWD_LEN = STRLEN( V_PASSWORD ).
      CALL FUNCTION 'HTTP_SCRAMBLE'
        EXPORTING
          SOURCE      = V_PASSWORD
          SOURCELEN   = V_PWD_LEN
          KEY         = CS_KEY_500098
        IMPORTING
          DESTINATION = V_PASSWORD.
      CALL FUNCTION 'FTP_CONNECT'
        EXPORTING
          USER            = 'test'
          PASSWORD        = V_PASSWORD
          HOST            = '176.0.1.6'
          RFC_DESTINATION = 'SAPFTPA'
        IMPORTING
          HANDLE          = MI_HANDLE
        EXCEPTIONS
          NOT_CONNECTED   = 1
          OTHERS          = 2.
      CHECK SY-SUBRC = 0.
      cmd = 'lcd d:\ftp'. .
      PERFORM FTP_COMMAND USING CMD.
      CMD = 'asc'.
      PERFORM FTP_COMMAND USING CMD.
      CONCATENATE 'dir' 'ftpt*' INTO CMD SEPARATED BY SPACE.
      PERFORM FTP_COMMAND USING CMD.
      cmd = 'ls'.
    concatenate 'ls' INTO CMD SEPARATED BY SPACE.
      PERFORM FTP_COMMAND USING CMD.
      cmd = 'mget trial.txt'.
    CONCATENATE 'mget' 'trial.txt' INTO CMD SEPARATED BY SPACE.
      CALL FUNCTION 'FTP_COMMAND'
        EXPORTING
          HANDLE        = MI_HANDLE
          COMMAND       = CMD
        TABLES
          DATA          = MTAB_DATA1
        EXCEPTIONS
          TCPIP_ERROR   = 1
          COMMAND_ERROR = 2
          DATA_ERROR    = 3
          OTHERS        = 4.
      IF SY-SUBRC = 0.
        LOOP AT MTAB_DATA1.
          WRITE: / MTAB_DATA1.
        ENDLOOP.
      ELSE.
        CONCATENATE 'Error in FTP Command while executing' CMD INTO ERROR SEPARATED BY SPACE.
        WRITE: / ERROR.
      ENDIF.

    Hi
    try this.....in one of my reqt, i done this successfully....
    FORM FTPCON.
    FTP-------------------------------------------------------*
      CLEAR DSTLEN.
      SET EXTENDED CHECK OFF.
      DSTLEN = STRLEN( S_PWD ).     -
    >  (S_PWD (password) is a selection screen field )                  
      CALL FUNCTION 'HTTP_SCRAMBLE'
        EXPORTING
          SOURCE      = S_PWD
          SOURCELEN   = DSTLEN
          KEY         = KEY
        IMPORTING
          DESTINATION = S_PWD.
      CALL FUNCTION 'FTP_CONNECT'
        EXPORTING
          USER            = P_USER                   -
    > Username
          PASSWORD        = S_PWD             -
    > password
          HOST            = P_HOST                  -
    > Host
          RFC_DESTINATION = P_DEST         -
    > Destination
        IMPORTING
          HANDLE          = HDL
        EXCEPTIONS
          NOT_CONNECTED   = 1
          OTHERS          = 2.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'FTP_COMMAND'
        EXPORTING
          HANDLE        = HDL
          COMMAND       = 'set passive on'
        TABLES
          DATA          = RESULT
        EXCEPTIONS
          TCPIP_ERROR   = 1
          COMMAND_ERROR = 2
          DATA_ERROR    = 3.
      CALL FUNCTION 'FTP_R3_TO_SERVER'
        EXPORTING
          HANDLE         = HDL
          FNAME          = G_FCNAME
          CHARACTER_MODE = 'X'
        TABLES
          TEXT           = T_FILE1
        EXCEPTIONS
          TCPIP_ERROR    = 1
          COMMAND_ERROR  = 2
          DATA_ERROR     = 3
          OTHERS         = 4.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'FTP_R3_TO_SERVER'
        EXPORTING
          HANDLE         = HDL
          FNAME          = G_FCNAME1
          CHARACTER_MODE = 'X'
        TABLES
          TEXT           = T_FILE2
        EXCEPTIONS
          TCPIP_ERROR    = 1
          COMMAND_ERROR  = 2
          DATA_ERROR     = 3
          OTHERS         = 4.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'FTP_DISCONNECT'
        EXPORTING
          HANDLE = HDL.
      CALL FUNCTION 'RFC_CONNECTION_CLOSE'
          EXPORTING
            DESTINATION          = P_DEST
          EXCEPTIONS
            DESTINATION_NOT_OPEN = 1
            OTHERS               = 2.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    ENDFORM.                    " FTPCON
    Hope it helps.....

  • How to use sda6810 to receive data from a rs485 channel?

    I want to use sda6810 to anlyze data from a rs485 bus. So I use Labview to progame the sda6810 with the drivers.Firstly,I intilite the card,then I cofigued an channel to send data from a buffer,and configued another channel to receive data from the first chanel . But unfortunatly the data I received was not equal to the data I sended.And there are not any error messages indicated in Labview
    And when I try to use the GP channel,I found it worked properly.please tell me how I can solve the problem?

    I really apreciate your help.You told me that
    I should use the exameples which shipped with sda driver firstly. I do used them,and it worked correctly.So I think the connections was being setup properly.And I
    used labview to progame the rs485 channel
    . It do received something .But it was incorrect.
    I would be grateful if you could send me an
    example writted by labview,or you could tell
    me you e-mail address.
    Here is my code .
    Attachments:
    youyou2.zip ‏110 KB

  • ICloud storage space used up by old data from 1st gen iPad I traded in nearly 2 yrs ago for an iPad Mini. Can't backup any info for mini or new 6 plus. How can I access this old data to clear it out?

    My iCoud storage space is being used up by old data from a 1st  generation iPad I traded in nearly 2 yrs ago for an iPad Mini. The people at the sprint store where I made my trade were supposed to transfer everything over from my old iPad to the new Mini once they backed up the old device to iCloud. Well, long story short, none of the data ever got transferred to the new iPad, but it all got backed to iCloud, eating up all my storage space. Here I am almost 2 years later, and I've never been able to back-up my iPad mini. What's worse, My iPhone 4 wasn't backed up that whole time, and now I can't back-up my data from my new iPhone 6 Plus to iCloud either. Trying to find creative ways to store and save my information and data between all my devices is getting to be ridiculous. I don't want to upgrade my storage space though...just want to clear out a great deal of what is already being stored. How can I access this old data to clear it out?

    The only way to access data from an iCloud backup is to restore it to your device.  You could, for example, back up your iPad mini to your computer using iTunes (by connecting it, opening iTunes, then going to File>Devices>Back Up and choosing to back up apps and transfer purchases when prompted), then erase it and restore the old iPad backup (as explained here: iCloud: Restore or set up your iOS device from iCloud), save any recovered data you want to keep, then restore your iTunes backup back to your iPad mini (by connecting it to your computer, opening iTunes, then going to File>Devices>Restore from Backup).
    Once you're done with the old backup, delete it from your account to free up the space.

  • What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

    Hi All,
    I am new to TestStand. Still in the process of learning it.
    What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
    Thanks in advance,
    LaVIEWan
    Solved!
    Go to Solution.

    Hi,
    Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
    Regards
    Ray Farmer

Maybe you are looking for

  • Why my imac start with question mark sign on gray screen

    need help with imac start up

  • RE: HDCP

    I have a question that I bought some movie through from i Tune. I saw them last night and I was going to see tonight other one I couldn't see anymore and it came up below. " This movie cannot be played because a display that is not authorized to play

  • Installing Windows 2008 Server on T500

    Hi, I am considering installing Windows server 2008 on my T500, but was a bit concerend about driver support and compatibility. Has anyone else tried this? Thanks David

  • G5 iMac won't start! Help needed.

    Got a new intel iMac. Gave my husband my old G5 iMac (not intel). It was working perfectly. For some reason unknown to me, he decided he was going to reinstall everything from scratch so he grabbed the first disk he saw and put it in the computer. It

  • Editing web descriptors using MBeans (e.g. FilterMBean)

    Hi, I'm trying to add and modify web filters programatically via the weblogic mbeans. I'm using this code: Environment env = new Environment(); env.setProviderUrl("t3://myhost:80"); env.setSecurityPrincipal("username"); env.setSecurityCredentials("pa