Using keyword "phrases" in podcast xml

Can you use keywords greater than one-word in the keywords section of the xml? For instance, if I wanted to use "science fiction" as a keyword, how exactly do I do that? I'm guessing it would look something like
film, "science fiction", review, criticism, "transformers revenge of the fallen", etc., etc.
Is this correct? Also, do the individual terms (such as "science fiction") count as one keyword or the number of words contained in the term?
Thanks for the help.

Nothing is said about phrases in the Apple Tech Specs: I doubt that using quotes is going to work. AFAIK you can only have single words (to a mximuim of 12) which should be separated by commas as you've done in your example.
Of course it you put in
science, fiction
and someone enters 'science fiction' in the search field then it will look for the two words and you stand a good chance of being found.

Similar Messages

Classification based on "keyword phrase"?

Hello - I have created a Classification Model using SVM that works well for a 3-class problem (Good, Bad, Neutral). The target is built into the training dataset and important keywords are discovered.
I've been trying to figure out if there is a way to build a Classification model that is based on keyword phrases (2 or more words) with Good, Bad or Neutral assigned to the "story".
For example, classifying news as being Good, Bad or Neutral for a company. The keyword phrases may be "failed to deliver" or "delivered on schedule" ... Each phrase is associated with Good, Bad or Neutral.
I don't believe this can be done with Support Vector Machine. Is there an alternative?
Thanks

The key hurdle to implement what you would like to do is how to create your "keyword phrases." If you have a way of doing it then you could use SVM to do the classification just the way you want it.
There are a couple of ways that you can achieve your goal. I will list some of them below:
1) Let's say that you have a way of extracting/creating your own set of "key phrases" either by hand or by some automated method. The next step would be how to create a classifier with this information. A simple approach is to consider the set of unique "key phrases" you've created as the attributes used for mining. Using your example, the phrases "failed to deliver" or "delivered on schedule" would be two different attributes. If a given document contained "failed to deliver" then we would set the value of this attribute to 1 otherwise to 0. In a sparse representation you don't need to represent the zeros, thus saving a lot of space. Now you can train SVM using this new set of attributes as inputs and your three classes as target. It is possible to create more sophisticated coding schemes that would take into account the number of times a phrase shows up in the document as well as the frequency of the phrase in the whole collection. But this initial scheme is a starting point that might help you see how to do it with ODM.
2) Using Oracle technology it is possible to automatically extract sentences or group of words to make new features. This would give you less control over the "key sentences" but may simplify the creation of "key sentences" for you. There are two approaches you can take. One uses Oracle Text feature extraction alone. The other combines the first approach with the NMF algorithm. Can elaborate further if this a path that you want to take.
Regards,
--Marcos

Can anyone tell me the difference between the rss.xml and podcast.xml?

I have the Podcast maker program. Can anyone tell me the difference between the rss.xml and podcast.xml? How do they differ? What do I use each of them for? Where should I put them in my directory?

Podcast Maker sets up your podcast from media files you enter into it; you enter the summary and description. It then publishes to your iDisk or other server, and in the process created the podcast.xml file which you can submit to iTunes.
It doesn't create an rss.xml file: it sounds as if you are also creating the podcast in iWeb, which does. This has the advantage of creating a web page; it will also create the rss.xml file.
Both are valid - of course if there are any differences between the version in Podcast Maker and the version in iWeb then the xml files will be different. But basically you seem to be creating two versions of the same podcast - if you are making it in iWeb then the Podcast maker version is really redundant (though I prefer it for podcast creation). If you want to go on using both I should use the podcast.xml feed it creates.

Tutorial Announcement .:: Searching News Using Keywords ::.

hello friends
Today i made this new tutorial about searching database using "KEYWORDS", searching by keywords will give you the ability to search through many tables in your database, even in one or more fields in the same table.
when a searcher type a word, or even complete phrase, the results will be specified to this word or phrase.
For example if you searched about the word "News", and it mentioned in the news title and news content in tow records, these two records will appear in the search results.
Results,,, results will be something very advanced, amazing, you can say it`s 70% of MX SiteSearch options.
Also i included small script that will be very helpful showing the full details page URL dynamically, specially in the results page, this script automatically detecting the Host name, Site name, so it will be very easy to show the full path to the keyword results details page.
This tutorial will considered as a part of the "news_system" tutorial, and the search application will be included to the news system for more convenient for the reader...
Requirements:
- we will create 2 pages:
1- search.php "the search form".
2- results.php "the results page".
- Note:
* The search page will included with the entire news system script as an external file, don`t put anything else in this page except the search form, and it will included within the head section.
:: Watch Tutorials ::
:: Online Demo ::

Masking? Rotsoscoping? I can think of a million ways to create separated layers or mattes and then duplicate the layer and invert the masks/ matte, but if you never have used that stuff before, you will hard-crash on concrete and not get very far, I'm afraid. It takes at least a bit of practice to produce a clean matte. As a palce to start you may get by suing the Rotobrush and see, if it produces clean enough edges, but if not, it's proably better to scrap the idea before eitehr ending up with a bad result or not meeting your deadline...
Mylenium

Problem in use xmlgen.insertXML to insert XML file to Object Viewse

I am trying to update XML file to Object View but it failed. Refer to the steps that I was doing.
1) Use utl_file.get_line to read XML file which I generated (It is no problem)
2)The xml data is
<?xml version="1.0" ?>
- <ROWSET>
- <ROW num="1">
<PK_NO>305</PK_NO>
<ACC_NAME>PAPERS AND CLIPS</ACC_NAME>
<FROM_NAME>MB METAL PTE LTD</FROM_NAME>
<MAS_NO>990015</MAS_NO>
<MAS_DATE>2000-04-07 15:47:52.0</MAS_DATE>
<CURR_CODE>SGD</CURR_CODE>
<MAS_CODE>WRFQ</MAS_CODE>
<REMARK>SADKJAS</REMARK>
- <LINEITEMLIST_NTAB>
- <LINEITEMLIST_NTAB_ITEM>
<ITEM_NO>1</ITEM_NO>
<STK_C>2506401</STK_C>
<SP_STK_C>H282828</SP_STK_C>
<STK_NAME>STICK-ON-NOTES - 11110 1.5, 12 100 SHEET PADS</STK_NAME>
<UOM>SET</UOM>
<QTY>10</QTY>
<SALES_PRICE>95.50</SALES_PRICE>
<REMARK>SADKJAS</REMARK>
</LINEITEMLIST_NTAB_ITEM>
- <LINEITEMLIST_NTAB_ITEM>
<ITEM_NO>2</ITEM_NO>
<STK_C>7706001</STK_C>
<SP_STK_C>H282828</SP_STK_C>
<STK_NAME>FACESHIELD/EYE PROT CLEAR GLASS WTR PLATE, STANDARD DREW</STK_NAME>
<UOM>PCS</UOM>
<QTY>1</QTY>
<SALES_PRICE>100</SALES_PRICE>
<REMARK>SADKJAS</REMARK>
</LINEITEMLIST_NTAB_ITEM>
</LINEITEMLIST_NTAB>
</ROW>
</ROWSET>
3) From Object View, I generated xml file is
- <ROWSET>
- <ROW num="1">
<PK_NO>2</PK_NO>
<ACC_NAME>PAPERS AND CLIPS</ACC_NAME>
<FROM_NAME>MB METAL PTE LTD</FROM_NAME>
<MAS_NO>990015</MAS_NO>
<MAS_DATE>2000-06-07 00:00:00.0</MAS_DATE>
<CURR_CODE>SGD</CURR_CODE>
<MAS_CODE>WRFQ</MAS_CODE>
- <LINEITEMLIST_NTAB>
- <LINEITEMLIST_NTAB_ITEM>
<ITEM_NO>1</ITEM_NO>
<STK_C>2506401</STK_C>
<STK_NAME>STICK-ON-NOTES - 11110 1.5,X2 12 100 SHEET PADS</STK_NAME>
<UOM>SET</UOM>
<QTY>1</QTY>
<SALES_PRICE>10</SALES_PRICE>
</LINEITEMLIST_NTAB_ITEM>
</LINEITEMLIST_NTAB>
</ROW>
- <ROW num="2">
<PK_NO>4</PK_NO>
<ACC_NAME>ABC</ACC_NAME>
<FROM_NAME>VBF</FROM_NAME>
<MAS_NO>99200</MAS_NO>
<MAS_DATE>2000-01-04 00:00:00.0</MAS_DATE>
<CURR_CODE>SGD</CURR_CODE>
<MAS_CODE>DSDS</MAS_CODE>
<REMARK>WRFQ</REMARK>
<LINEITEMLIST_NTAB />
</ROW>
</ROWSET>
3) I use INSTEAD OF trigger for Object View to insert the data to database.
I got the message is:
ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException:5.
Anybody can give me the advise for that.
null

If you have the ftp server at 8080 running (9iR2 only) the simples way is to upload it to the database through that server. You can then do whatever you want using the xdburitype() procedure.
Below is an excerpt of a script I use to register XML schema's (I've got some very long ones, about 150K). It should work with "any" file..
begin
     dbms_xmlschema.registerSchema (
          schemaURL => 'http://www.agralin.nl/WebQuery/ns/&1',
          schemaDoc => xdburitype('/age/&1..xsd'),
          local => TRUE,
          genTables => FALSE,
          genbean => FALSE,
          genTypes => TRUE,
          force => FALSE,
          owner => 'AGE'
end;

Create a Purchase order using the BAPI using the data in the XML file.

Hello Gurus,
here is the scenario can anyone help me how to proceed explaining the procedure?
Create a Purchase order using the BAPI using the data in the XML file.
comprehensive explanations are appreciated.
thanks in advance.

hi,
first use fm "bapi_po_create".
then use fm "BAPI_ACC_GL_POSTING_POST"
The demo environment was made with real business scenario in mind, but following subjects need to be addressed in a live implementation:
     No exceptions and error handling is implemented, except the order rejection (e.g. partly delivery);
     In Navision both XML Ports and the XML DOM has been used to integrate with SAP XI, because XML ports has some drawbacks regarding to Namespaces in XML Documents (mandatory in SAP XI);
     A minimum of SAP and Navision customization is required to implement this solution. (e.g. user exit in SAP, Navision XML DOM).

How do you use Keywords?

I'm curious how you use Keywords. I started to go into my pictures today and add them. I went first to the first Event I had and looked for any pictures of my kids. I was going to make my Keywords pretty broad. If they were aged 0 - 5, then that was my Keyword. But, then I had a picture of a brother and a sister, where the brother was 8 and the sister was 4. What to do? Then I changed it from 0-5 to 0-10. I've tagged about 300 of them that way, but now I'm wondering if it's worth the time. I know I can also use multiple Keywords, but that just seems to be a lot of work.
For reference, I name all my pictures when I input them. I use the following format: name of person - event (if pertinent) - town - year, so that might come out as Chip - Halloween - Golden - '08. That way, I find it pretty easy to find whatever I might be looking for.
Do you use Keywords? If so, how?
Thanks.
Chip

The BEST system of keywording is the system you will actually execute. So your priority should be figuring out what you are willing and happy to do on a fairly regular basis.
Since it already sounds like your system is a hassle, I don't know that your keyword needs to reflect the age---you can easily search on KW: Kids and Date Range: (whatever the young years would be) after the fact, and save yourself trouble while tagging. Or set that up as a Smart Album, and then once you've done the "okay when the kid was 0-4 that would be the dates 1990-1994", you don't need to do it again.
Certainly, though, you should be open to multiple keywords on the same photo--that's the power of keywords, to categorize the same photo in multiple aspects.
I don't bother naming my photos, but unlike TD, I create a lot of smaller events and name them pretty carefully, similar to your photo names. I use keywords for recurring themes, like Me, Family, Friends, Rivers, Flowers, or places I visit multiple times. Things with a beginning and ending, I lean on the event name to track, eg "Christmas Eve, Christmas--Opening Gifts, Christmas--Dinner, Christmas--Hanging Out".
I find it very important to use the shortcuts, so that I can skim through 300 pix from a national park and just hit f to apply the Family keyword, m to apply the Me keyword, w for pictures of water, l for pictures of flowers, etc. (The keyword pane must be open to use the shortcuts)
I tend to set up a smart album based on a keyword about the same time I set up a keyword, so that the list of smart albums helps me remember what I am doing with keywords. Also, thinking in terms of which albums you want to be browsing helps figure out how you need to keyword the photos--when your relatives or friends come over, what do you want to show them?

As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo. I understand this was available in earlier versions. Any comments?

As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo. I understand this was available in earlier versions. Any comments?

Against TOU which you "agreed" to in order to post in these user to user forums. If you want to "suggest" something to Apple, do so in the Product Feedback area.

Error message when using Spry Data set with XML

Hi,
I have what i see as a big problem, might just be me being
dumm, but here we go.
When I try to use the feature of spry XML Data Set and insert
spry table I get error message when trying it in IE 7.
There are even a problem when I use fireworks automated slide
show function, where you can choose to use the Spry/XML gallery
feature.
The error message I get everytime (incl the auto gallery in
fireworks) is:
The tag: "html" doesn't have an attribute: "xmlns:spry" in
currently active versions.[XHTML 1.0 transitional]
The tag: "div" doesn't have an attribute: "spry:region" in
currently active versions.[XHTML 1.0 transitional]
The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
and so on.
What´s wrong?!

Hello barvid,
Ok, let's take each problem step by step:
1. The first error you see in the browser: " Exception while
loading ..." normally appears when you try to load files that are
not permitted by the browser security model. This means the XML
file you try to load is located on a different server than your
HTML which is not allowed. The browser is not permitting to load
any files that are not in the same domain as the current page
because of the complex security risks. You'll have to either get
the XML file from its original location and save it in your website
or use a proxy on your web server that should request that file
from the external server and send it to the browser as an XML from
the same domain as the HTML origin.
1.2 The "Exception while loading ..." error you see is a
generic error and my previous advise is based on my experience. In
case this is not your scenario you'll have to open the SpryData.js
and around line 112 you'll see the following code:
Spry.Debug.reportError("Exception caught while loading " +
url + ": " + e);
Please change this line with the following line of code:
Spry.Debug.reportError("Exception caught while loading " +
url + ": " + (e.message?e.message:e));
to obtain a more verbose error message that may clarify the
reasons of your errors.
2. The problems you describe are not browser errors but they
are w3c validation errors. At this point the XHTML standard allows
every application that define custom namespace attributes to also
link a DTD to the page so the page to continue to be valid.
Unfortunately at this point this feature is not correctly supported
by the FF and IE so we wrote an articles about how you should
link
the Spry DTD to your page so the validator understand the
custom attributes Spry use. You'll find inside the full description
of the problems and all the technical details you'll need to know
to solve this issue.
Regards,
Cristian

IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

How to quickly reassign previously used keywords

I'm using Adobe Bridge CS6.
My problem is that I have something like 3000 images, in several folders, to apply keywords to, and the keywords happen to be the names of the people appearing in those photos, and I cannot find an easy way to reapply existing keyword assignments. Let me explain:
Some photos will be a single person, others 2 or 3 in a shot, others maybe 6-8 people. And they appear in constantly changing configurations. For example, "John" may appear alone in photos 1-20, with "Peter" in photos 21-22, with "Sandy" and "Peter" in photos 23-30, "Peter" and "Sandy" alone without "John" in photos 31-70, and "John" by himself alone in photos 71-150, etc., with 500-1000 photos per folder. It gets really tedious when you have a group of 6-8 people that is seen occasionally or partially, interspersed with headshots of single individuals. While I have all of their names set up in a master keyword list, the master list itself has maybe 250 keywords in it, and it is painfully slow and tedious to either scroll up and down to the correct names, or to use the search box at the bottom of the keywords panel, each time the mix of persons in a photo changes. (The search is probably faster, but still slow.)
What I would love to have is a panel that showed ONLY the keywords (names) that I've used for the current folder's photos, which would let me apply them to new photos with either a single click (hallelujah!) or maybe drag-and-drop. This is because the currently used keyword list, if it existed, would be so much shorter than the master list, so that all the necessary keywords would always be in view and easily accessible.
What is maddenly irksome is that the currently assigned keywords appear almost within reach in the filter panel ... but alas, it is not possible to use that panel to assign those keywords to new photos.
I don't know if what I'm hoping to do is even possible in the current version. But maybe it is, or maybe someone here has some advice to make the process less frustrating.

What is maddenly irksome is that the currently assigned keywords appear almost within reach in the filter panel ... but alas, it is not possible to use that panel to assign those keywords to new photos.
You can export your current keyword list as back up and create or import a temporarily dedicated shorter keyword list.
But if you look at the metadata panel IPTC Core there is also the option to show the keywords applied to the image (if they don't show use the setting in Bridge Preferences Metadata Tab to select it to show)
Drag and drop is not possible but copy past is an option. Using collections you can select the files you want to apply the same keywords to, and when your search result is complete select the file that has all the correct keywords, copy the complete line of keywords, select all and paste the info in the same line to apply al keywords in one go to all selected files.
Is that about what you are looking for or am I completely misunderstanding your wish?

How to use keywords in a correct way for Acrobat Pro AND Spotlight

When I enter keywords in a PDF using CMD-D in Acrobat Professional I also want to find those keywords via OS X Spotlight. At the same time I to be able to use keywords when I enter keywords in PDFs using Preview.app.
What's the path to do this, and how do these three applications work together to provide a consistent search. I also need to know the details like do I enter keywords in Acrobat with komma or without, with a space before the komma or not etc.
The goal is to be able to have a constistant, compatible workflow for keywords/tags in PDFs using Acrobat, prevoew.app, and other applications; in order to manage large amounts of PDF files.

Hello Joao,
Thank you for your answers. I hope I can ask some more of your time because it is not totally clear yet.
I tried your suggestion to change the stroke width. This has no effect, other than the stroke width, the curves stay filled. It would be nice to show this in a picture... And I just noticed that I had the arguments wrong in my example (been playing around with it too much), the null and green should be the other way round. But also this did not make any difference. Specifying the fill color with the same color as the background color of the map is a workaround though.
Adding the theme_name to the feature attributes is an option, but would that be possible with predefined themes? At the moment we have all the theme definitions in the database.
The most important question however is how do I draw a single feature, based on some condition. The only method I can find in the MapViewer api is drawLiveFeatures with no feature args which "Draws all the live features that are returned to this client from MapViewer". I must be overlooking something.
Thanks again very much for your help,
Ida

Methods in bapi used to convert data into XML

Methods in bapi used to convert data into XML,
how to implement those also,
points will be rewarded
Thank you,
Regards,
Jagrut BharatKumar Shukla

Hi
Check this
http://www.sap-img.com/abap/sample-xml-source-code-for-sap.htm
https://forums.sdn.sap.com/click.jspa?searchID=2889167&messageID=3406594
Reward points for useful Answers
Regards
Anji

How to use Xerces to validate an XML file against a DTD

Hi, can anybody tell me how to use Xerces to validate an XML file against a DTD. its urgent. post some sample code. it would be helpful for my project. isupposed to use SAX parser(Xerces)
Thanx in advance

Come on, I googled "xerces validate" and the first link is the Xerces FAQ:
http://xerces.apache.org/xerces-j/faq-general.html
And of course "how to validate" is a Xerces FAQ. Help yourself by doing a little research instead of waiting for other people.

Java Mapping Using JAXB [Java Arch for XML Binding]

Hi All,
Anyone tried using JAXB [Java Architecture for XML Binding API available with Java WebServices Pack] technique for XML processing in Java Mapping??
I am facing the following problems..
1. I am not able to generate namespace while marshalling target XML [In standalone mode and not tried in XI].
2. What are the jar files we need to import?
I tried importing the following jar files in XI.
jaxb-api.jar,jaxb-impl.jar,jaxb-libs.jar,jax-qname.jar,namespace.jar,relaxngDatatype.jar
and getting some errors while importing these files in XI.
3. It throws error at runtime [Interface Mapping-Test Tab]
like Resource not found:javax/xml/bind/Messages_en.properties,javax/xml/bind/Messages_en_US.properties
4. Even after creating a copy of available file Messages.Properties with name: Messages_en.properties and Messages_en_US.properties.. it is not generating any messages in Target message tab
Thanks in Advance,
Ananth Chinnaraj

Sravya ,
I have searched wide and far for this, but no success.
A lot on JAXB XI and Webdynpro, but nothing on JAXB, XI and mappings.
Could you please post the url here ?
Thanks and kind regards,
Jan

Using keyword "phrases" in podcast xml

Similar Messages

Maybe you are looking for