Using PXI 2567 in switch exec for use in test stand

I am using a pxi 2567 card and have used a simulated ivi driver to use it in switch executive. To operate the switches from test stand I need to create routes in switch executive. Do I need simulated relays for switch exec to set endpoints, if so where can i get a simulated relay; if not please advise.

You do not need simulated relays. The channel names on the 2567 will be your "virtual" relays. Each of the 2567's 64 channels have names like COMn and CHn, where n is an index from 0 to 63.
You may create routes in NI Switch Executive (and invoke those routes in TestStand). If you do not want to create each named route, you can also use an expression to indicate what you want to have routed.
For example, support your 2567 is named "Dev1" and you wanted to connect relay 0. The syntax for the connect route specification in TestStand would look like:
"[Dev1/com0->Dev1/ch0]"

Similar Messages

  • I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

    I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
    I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

    Contact the App store for Apple ID help. Their support link is on the right of the App store window
    LN

  • Using mingw to make a .dll for use in labview ?

    I have seen some posts on this, but none of them take it all the way from C code to configuring the shared library node...
    My code is heavily based on this:
    http://forums.ni.com/ni/board/message?board.id=170&thread.id=171056
    Here are my files:
    //reedll.h
    #ifdef BUILD_DLL
    // the dll exports
    #define EXPORT __declspec(dllexport)
    #else
    // the exe imports
    #define EXPORT __declspec(dllimport)
    #endif
    // function to be imported/exported
    EXPORT void tstfunc(int A, int B, int C);
    and:
    //DLL_Test.c
    #include "reedll.h"
    EXPORT void tstfunc(int A, int B, int C)
      C = A + B;
    Its meant to be as bare bones as I can get it. No crazy pointers or anything.
    I compile as follows usin MinGW:
    g++ -c -DBUILD_DLL DLL_Test.c
    g++ -shared -o tst.dll -Wl,--out-implib,libtstdll.a DLL_Test.o
    And it appears to compile fine.
    When I go to import the .dll into the shared library node the "Function Name" field is garbled and says "Z7tstfunciii" instead of "tstfunc".  Needless to say the shared library function icon that results doesnt work

    You should tell the mingw compiler to not name mangle the symbols. Most likely you use a cpp file enxtension and then mingw as Visual C will invoke the cpp compiler instead of c which by default name mangles function names.
    If you want or need to use cpp, you can also try to declare your exported symbols like this:
    #ifdef __cplusplus
    extern "C" {
    #endif
    EXPORT void tstfunc(int A, int B, int C);
    /* all the other function prototypes you do not want to be mangled */
    #ifdef __cplusplus
    #endif
    Not sure if __cplusplus is defined by mingw, if not you have to find how it indicates that C++ mode has been invoked.
    Message Edited by rolfk on 03-24-2010 02:48 PM
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Using a video purchased from itunes for use in windows media player

    I purchased a tv show on itunes and I was wondering if there was any possible way to view the video using windows media player,
    thanks

    Sorry but no. The copy protection will only allow play in iTunes or on a video-capable iPod.

  • Document Word for Results in Test Stand

    Hi,
    I am using TestStand 3.0 and LabView 7.0 . I need to put the result of measurements in a Word Document.
    I am not able to find the Result Collection (where TestStand stores the results of steps).
    Thank you very much.

    Hi
    There is a example on line called
    "Output the Results of an ATE Teststand to Microsoft Word for Office 97" which generates a word report.
    I have attached the link below.
    I hope this helps.
    Regards
    Anand Jain
    National Instruments
    http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3DAFF56A4E034080020E74861&p_node=DZ52156&p_submitted=N&p_rank=&p_answer=&p_source=External

  • How to activate an enterprise service for use?

    Hi experts,
    I want to use a web service out of the bundle "Technical Document Management Connectivity". The web service is called "Read Document File Variant".
    I know to use WSCONFIG to configure web services for use. But I can not find this web service listed there. I know that we have installed EnhP1 and EnhP2 on our system and the above mentioned web service is shipped with EnhP2.
    Do I have to activate some swichtes within the Switch Framework in transaction SFW5 first? Can somebody tell me which switches to active for what specific enterprise service?
    Thanks a lot for your help.
    Best regards
    Lars

    To explain the concept …
    The Switch Framework allows you to control the visibility of objects or their components by means of switches.Between the business function sets and the industry packages are the switches.
    It is the business function that is switched on, not the switch itself therefore you have to use Transaction SFW5 find the business function and then activate it - in order to use it.
    Hope this helps

  • When not in use should wifi be switched off?

    When wifi is not in use should it be switched off for enhanced security?

    You could turn off the wireless if you really are concerned that someone may be trying to crack your network. But, if that were the case, you would want to be changing the wireless network password on a regular basis.
    The possible downside to turning off the WiFi on the AirPort Extreme is that it is not nearly as easy to turn it back on.
    Here is what you have to do:
    1)    Open AirPort Utility
    2)    Click on the AirPort Extreme
    3)    Click Edit
    4)    Click the Wireless tab at the top of the next page
    5)    Change the setting for Network Mode to Create a wireless network
    6)    Edit the name of the wireless network
    7)    Set the Wireless Security to WPA2 Personal
    8)    Enter the wireless network password
    9)    Verify the wireless network password
    10)  Click Update
    11)  Wait a minute for the AirPort to restart
    Quite tedious for most folks, but it is your call.

  • How do I use mono and 1 spot colour for print, where the spot colour applies to an element, rather than the whole image?

    I am struggling to work with spot colours, using scanned images edited in Photoshop for use in InDesign to then go to print.
    We print to two plates to save money for our publication. In this case magenta and black.
    I could use the spot colour mode but that works with curves and I only want a certain part magenta. Imagine a business card with a gloss finish where I only want to apply it to certain part ie the name of the employee, using a curve would match a certain shade therefore this method would be unsuitable.
    I have also tried using channels, one grayscale and one magenta, but using the file types either InDesign bugs or it comes out in mono.
    It isn't possible to recreate the logo in InDesign, if only it was this easy...
    If someones already discussed this, I can't find it, but if someone could point me in the right direction—I'd be very grateful!
    Using Photoshop CS4, InDesign CS4. Access to Adobe Cloud at home...

    I'm assuming at least some people on here must have experience of the Scintilla control for creating a Notepad++ type application. I'd like to use this control, unfortunately there is very little in the way of documentation or working examples
    around
    >unfortunately there is very little in the way of documentation
    Have you read all of this?
    Scintilla Documentation
    http://www.scintilla.org/ScintillaDoc.html
    >or working examples around
    Have you examined this project in detail?
    SciTE is a SCIntilla based Text Editor.
    http://www.scintilla.org/SciTE.html
    SciTE Documentation
    http://www.scintilla.org/SciTEDoc.html
    - Wayne

  • How to wrap an existing javabean for using inside a form

    I have an existing java bean(meterbar.jar) I would like to try and intergrate into a bean area of a form.
    I have looked at a bunch of documentation but am still lost. How can I use jdeveloper to "wrap" the bean for use
    inside a form. I am in totally new territory all around so please be specific. Thanks in advance.
    Linda

    I have an existing java bean(meterbar.jar) I would like to try and intergrate into a bean area of a form.
    I have looked at a bunch of documentation but am still lost. How can I use jdeveloper to "wrap" the bean for use
    inside a form. I am in totally new territory all around so please be specific. Thanks in advance.
    Linda

  • User's default email address for use with Answers

    How to use user's default email address for use with Answers?
    When I was referring to the Admin Guide I found the below description for email session variable.
    Can somebody please help me with this.
    Contains the user's default email address for use with Answers. If the delivery option of Answers is enabled, an email device using this address will be created for the user upon first log in. Users can override this address by changing their account settings in Oracle BI Presentation Services.
    Thanks,
    Swetha

    I think the documentation is wrongly saying that it will be used by Answers. The email will be used by Delivers, the BI Scheduler component.

  • Need reasons not to use SMB/win2003 as file server for mac clients

    hey guys,
    i'm looking for reasons not to use windwos2003 as fileserver with smb for use with os x in a graphic production environment.
    can someone help? just need a sum up for "internal use"
    smb seems to be slower than afp
    etc...
    thank you!

    Well, it tends to be that saving over the network from Adobe and Quark apps "just works better" over AFP than it does over SMB.
    Put another way, people wouldn't be paying $4000 for a software license form Extreme-ZIP so they can serve AFP from a Windows 2003 server if there wasn't a real benefit to this. You can get an Xserve for this same $4000

  • I can't transfer files using bluetooth, i can't transfer files using bluetooth

    i can't transfer files using bluetooth

    Bluetooth on iPads is mainly for use with keyboards and headphones, not for copying content
    Supported Bluetooth profiles : http://support.apple.com/kb/HT3647

  • Configure PXI-2567 to Trigger on Rising Edge using LabWindows​/CVI

    I need some help configuring the trigger edge for a PXI-2567 using Labwindows/CVI.  I have been able to successfully create and execute a scan list using both the ni-switch and daqmx APIs.  However, currently the PXI-2567 triggers on the falling edge of an input trigger.  I need to configure it to trigger on the rising edge of an input trigger.  Every function I could find in the daqmx API for configuring the trigger edge gave a non-fatal runtime error, and I could find no such functions in the ni-switch API.
    Any help configuring the input trigger edge on the PXI-2567 using Labwindows/CVI would be appreciated.
    Thanks

    Hi JonRice,
    You can configure the scan list to execute on the rising edge of an input trigger.  Here are the Labwindows/CVI and LabVIEW functions you would want to use to retrieve, specify or verify the edge of a digital signal that advances to the next entry in a scan list.
    NI-DAQmx C Property: More >> Advance >> Digital Edge >> Edge
    You can get/set/reset this property using:
    DAQmxGetDigEdgeAdvTrigEdge
    DAQmxSetDigEdgeAdvTrigEdge
    DAQmxResetDigEdgeAdvTrigEdge
    NI-SWITCH C Attribute: NISWITCH_ATTR_TRIGGER_INPUT_POLARITY
    You can get/set/check this attribute using:
    niSwitch_GetAttributeViInt32
    niSwitch_SetAttributeViInt32
    niSwitch_CheckAttributeViInt32
    NI-DAQmx LabVIEW Property: More:Advanceigital Edge:Edge
    DAQmx Trigger Property Node
    Short Name: Adv.DigEdge.Edge
    NI-SWITCH LabVIEW Property: Trigger Input Polarity
    niSwitch Property Node
    Short Name: Trigger Input Polarity
    Hope this helps!  Let me know if you have further questions.
    Chad Erickson
    Switch Product Support Engineer
    NI - USA

  • Whenever I updated or downloaded a new app from the App Store, a message appears saying:   "Account Not In This Store Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."   I made some research onl

    Whenever I updated or downloaded a new app from the App Store, a message appears saying:
    "Account Not In This Store
    Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."
    I made some research online and asked a few of my friends with the same problem. All they did was sign out of iTunes from settings>iTunes & App Stores or from the App Store itself and signed back in. It worked for many of them but not with my iPhone 4s. It really does get on my nerves to always sign out and back in to the App Store as it sometimes works and allows me to update and download or most of the time it doesnt.
    When viewing my Apple ID account on my iPhone (after entering the password) it either views my account or says:
    "This Apple ID is only valid for purchases in the U.S. iTunes Store. You will be switched to that Store. Try your purchase again."
    So I press on OK then either switches me to the App Store app of its choice, or says "Cannot connect to iTunes Store".
    I tried restoring iOS6 hoping it was a bad installation, but i still have the same problem.
    Can anyone help me please?
    Arian

    Are you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
    If you keep encountering problems contact iTunes support. They will help you sort it out.

  • Why do I get the message when I try to purchase an app or song on itunes using my iPhone5? "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to the New Zealand store before purchasing."

    When I try to buy either an app or a song via iTunes, I have just started getting the following message and I am unable to change the store location. "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to the New Zealand store before purchasing."
    This problem has only just started happening. I am on an iPhone5 iOS 7.0.4.
    Very frustrating. Can someone please tell me why & where the change has occured and how to fix it? In the past I have purchased many apps and songs on itunes and never had this problem.
    Thanks a mill :-)

    Click here and follow the instructions to change the iTunes Store country.
    (97125)

Maybe you are looking for