Using Table as Datasource

Hi guys i need to use a SAP table in BW as source for a datasource...whats the procedure for do that?
Message was edited by:
        Oscar Díaz

Hi,
You can create a generic data source for the same. Take a look at the link.
Re: Step-by-Step procedure for creating generic datasource
***Assign pints if helpful***
Kalyan

Similar Messages

  • How to find which datasource are using  tables AFRU ,CAUFV and AUFM

    *how to find which datasource are using  tables AFRU ,CAUFV and AUFM*

    Hi,
    You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
    Hope this helps.....
    Regards,
    SUman

  • Datasources with function module which uses table type

    hi..
    I am creating a datasource which extracts data using a function module from xRPM to BW. When creating the function module it gives an error " TABLES parameters are obsolete!" while trying to specify the extract structure. I searched in SDN and learnt that we need to use table types and use that in the changing tab.Not sure how that works and where we need to use the extract structure for this.
    Could someone please explain this to me and let me know how i can create my datasource using this type of function module.

    Hi,
    in your case you need the tables parameter, as the service api expects the result of the fm in a table called e_t_data. Of course table parameters are obsolet but you can just ignore the warning and it will work.
    regards
    Siggi
    PS: Extraction fm must follow a strict interface definition.
    Message was edited by:
            Siegfried Szameitat

  • Problem while creating generic DataSource using table

    Hello all,
    I am creating a generic DataSource using table EKBE. It is giving error " invalid extract structure template EKBE ". The reason is " The system tried to generate an extract structure with the template structure EKBE. This operation failed, because the template structure quantity fields or currency fields, for example, field MENGE refer to a different table (EKPO)".
    Could you suggest how to approach?
    Thanks,
    Zak.

    hi zahir,
    In your case the reference table used for quantity is ekko and the field is meins.
    and the reference table used for currency is ekpo and the field is waers.
    So you are not taking data from a single table. so you better create a view give the table name ekbe and select the corresponding fields you want.
    Add MEINS and WAERS and as well your required field in the view for example Zview and for Quantity field mention Zview as reference table and reference field as MEINS same for WAERS.
    try this if it doent work, tell me what error you are facing.
    with regards!
    ramesh

  • How to find which datasource is using table JCDS?

    How to find which datasource is using table JCDS?

    Hi,
    Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
    For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
    u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
    u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
    u2022     Requires the Order planned end date which is dependent on the operation  planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
    u2022     Required characteristic data and attributes of the Functional location  is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
    u2022     Required standard class  of the functional location is updating from other DSO where the  classification  data is staging with the help of different data flow.
    2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
    Status Data Flow Details:
    The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
    To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
    Required status change dates  are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
    The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
    JCDS     MANDT     =     JSTO     MANDT
    JCDS     OBJNR          =     JSTO     OBJNR
    T000     MANDT     =     JCDS     MANDT
    This DS has enhanced for the below  two fields
    1.     Order Number
    2.     Operation/Activity Number
    The Logic to populate the above two fileds is as below.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
    regards
    BVR

  • Generic extraction using table

    Hello friends,
    We have three methods in Generic extraction, as we know.
    1. Using view/Table
    2. Using FM
    3. Using Infoset Query
    I know pretty well the extraction using View, but when do we use "Table"?
    Is there a specific method to perform generic extraction using TABLE?
    Please clarify

    Thanks for the replies.
    In case of a generic extraction with view, i've followed the below procedure.
    1. RSO2.
    2.create a generic datasource by giving a view name and selecting the fields for selection criteria, save and generate.
    3. replicate data sources in BW.
    4. create an infosource and assign the data source, mapping and create an infopackage to load data.
    Now ,
    1. how do we enable Delta for this method?
    2. Is  this possible at all? if yes, how?
    3. How do we proceed after the replication of DataSources in BI? specifically, procedure in BI?
    Pls clarify.

  • Replicate a table as datasource on BW

    Hi,
    I am planning to create tables in BW and then somehow replicate the tables as datasources to begin loading. Is this possible? if it is, how can I do that?
    Thanks,
    RT

    Hi AHP,
    Actually I have these flat files that are supposed to be loaded to BW for master data infoobjects. Per Kamal, I can load through flat files using infopackages, but I am planning to do the following to ease the pain of formating the files by hand:
    1. Upload the data files to BW tables using ABAP.
    2. Run RSO2 from BW to create data sources.
    3. Replicate in BW.
    4. Create infosources.
    5. Create infopackages.
    6. Load to the InfoObjects.
    Would you think this would work? When I replicate, would I highlight the BW source system?
    Thanks
    RT
    Message was edited by: Rob  Thomas

  • Diff Ways to Create OLAP Universe using BI/BW DataSource?

    Hi Experts,
    I konw there are two diff ways to create olap universe using BI/BW datasource.
    1. Uisng InfoCube
    2. Using BEx Query..
    so.. I need you help to know when we use InfoCube and When We use BEx Query.
    Can you please explain me  in details and give me some pros and cons using each connection ..if there is any documentations please provide me ...
    Thanks

    Hi sap mdm1980,
    The characteristic InfoProvider (0TCTIFPROV) refers to the technical name
    of an InfoProvider. In BI, queries can be created on an InfoProvider or an
    InfoProvider can be used for reporting.
    An InfoProvider is generic term for all the DataTargets and Virtual Providers
    (VirtualProvider or MultiProvider). An InfoProvider may or may not contain data.
    Infocube is type of an infoprovider
    An InfoCube describes (from an analysis point of view) a self-contained dataset,
    for example, for a business-orientated area. You analyze this dataset in a BEx query.
    An InfoCube is a set of relational tables arranged according to the star schema:
    A large fact table in the middle surrounded by several dimension tables.
    InfoCubes are filled with data from one or more InfoSources or other InfoProviders.
    They are available as InfoProviders for analysis and reporting purposes.
    The data is stored physically in an InfoCube
    Regards
    Praveen

  • How to use table maintenance view in module pool screen

    hi ,
    want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.

    You can simply call it via SM30.   Or you can call the table maintence view from any program(report or module pool) using a function module.
      call function 'VIEW_MAINTENANCE_CALL'
           exporting
                action                       = 'U'
                view_name                    = 'Z_Table_Name'
           exceptions
                client_reference             = 1
                foreign_lock                 = 2
                invalid_action               = 3
                no_clientindependent_auth    = 4
                no_database_function         = 5
                no_editor_function           = 6
                no_show_auth                 = 7
                no_tvdir_entry               = 8
                no_upd_auth                  = 9
                only_show_allowed            = 10
                system_failure               = 11
                unknown_field_in_dba_sellist = 12
                view_not_found               = 13
                others                       = 14.
    Regards,
    RIch Heilman

  • Derive found flag in SQL with where clause using TABLE(CAST function

    Dear All,
    Stored procedure listEmployees
    ==========================
    CREATE OR REPLACE TYPE STRING_ARRAY AS VARRAY(8000) OF VARCHAR2(15);
    empIdList STRING_ARRAY
    countriesList STRING_ARRAY
    SELECT EMP_ID, EMP_COUNTRY, EMP_NAME, FOUND_FLAG_
    FROM EMPLOYEE WHERE
    EMP_ID IN
    (SELECT * FROM TABLE(CAST(empIdList AS STRING_ARRAY))
    AND EMP_COUNTRY IN
    (SELECT * FROM TABLE(CAST(countriesList AS STRING_ARRAY))
    =================
    I have a stored procedure which lists the employees using above simple query.
    Here I am using table CAST function to find the list of employees in one go
    instead of looping through each and every employee
    Everything fine until requirements forced me to get the FOUND_FLAG as well.
    Now I wanted derive the FOUND_FLAG by using rownum, rowid, decode functions
    but I was not successful
    Can you please suggest if there is any intelligent way to say weather the
    row is found for given parameters in the where clause?
    If not I may have to loop through each set of empIdList, countriesList
    and find the values individually just to set a flag. In this approach I can’t use
    the TABLE CAST function which is efficient I suppose.
    Note that query STRING_ARRAY is an VARRAY. It is very big in size and this procedure
    suppose to handle large sets of data.
    Thanks In advance
    Regards
    Charan
    Edited by: kmcharan on 03-Dec-2009 09:55
    Edited by: kmcharan on 03-Dec-2009 09:55

    If your query returns results, you have found them... so your "FOUND" flag might be a constant,...

  • Using Table Control

    Hi Experts,
    I am working on module pool Program using " Table Control ".
    the below code is a part of program.
    "  Here i want insert new lines ( New values ). Please tell me that how to Do? "
    MODULE USER_COMMAND_0100 INPUT.
      SAVE_OK = OK_CODE.
      CLEAR OK_CODE.
      CASE SAVE_OK.
        WHEN 'INSERT'.
       "  Here i want insert new lines ( New values ). Please tell me that how to Do? "
        WHEN 'TOGGLE'.
          LOOP AT EMPLOYE-COLS INTO COLS WHERE INDEX GT 2.
            IF  COLS-SCREEN-INPUT = '0'.
              COLS-SCREEN-INPUT = '1'.
            ELSEIF  COLS-SCREEN-INPUT = '1'.
              COLS-SCREEN-INPUT = '0'.
            ENDIF.
            MODIFY EMPLOYE-COLS FROM COLS INDEX SY-TABIX.
          ENDLOOP.
        WHEN 'DELETE'.
         READ TABLE EMPLOYE-COLS INTO COLS WITH KEY SCREEN-INPUT = '1'.
          IF SY-SUBRC = 0.
            LOOP AT ITAB INTO ZEMPLOYE WHERE EMPID = 'X'.
              DELETE ITAB.
            ENDLOOP.
          ENDIF.
      ENDCASE.
    ENDMODULE.   
    Its Urgent  
    Thank You.
    Basu

    Hi,
    WHEN 'INSERT'.
    " Here i want insert new lines ( New values ). Please tell me that how to Do? "
    <b>Append initial line to EMPLOYE.</b>
    Or
    Change the table control attribute for rows.
    Reward if helpful.

  • I prepare chronologies in word, and i am trying to do the same in pages using tables and cells. But somtimes i need a cell to wrap onto the next page but I can't work out how to do it - any suggestions would be greatly appreciated

    I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page,  but I can't work out how to do it - any suggestions would be greatly appreciated

    brendanfromsydney wrote:
    What are the different opinions on why pages should not achieve this?
    As far as I know, Apple is free to choose to offer this or that feature.
    They never said that they want to clone Word or even compete with it.
    Differences between tables in both worlds are numerous.
    In Pages (or Numbers)
    - we can't sort a single column
    - we can't sort by row
    - we can't insert or remove a single cell
    - a cell can't cross pages boundaries
    If I understand well these design choices match :
    ++-+-+-+-+-+-+-+-++
    Apple Human Interface Guidelines:
    Apply the 80 Percent Solution
    During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
    If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
    +-+-+-+-+-+-+-+-+-++
    Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Order Query in SQ01 using Table Joins in CRM

    Hello Experts,
    I am trying to create a query using table joins in SQ01 in CRM because I need a report that will give me all transactions for a selected Business Partner.  I am unable to display any results when running my query.  I have found other threads which give a list of possible tables to join together, but the fields used in the joins were not described. 
    The tables I have joined in my query are as follows:
    CRMD_ORDERADM_H
    CRMD_ORDER_INDEX
    CRMD_PARTNER
    BUT_000
    I have used SE16 to try to search for additional tables to use for linking the Business Partner with a transaction, but I have been unsuccessful.
    Would anyone please give advice as how to proceed? 
    Reward points are available!
    Thank you in advance,
    David

    David
    The link with be the GUID.
    CRMD_ORDERADM_H = Document Header Table
    CRMD_ORDERADM_I = Document Line item Table
    CRMD_LINK = Lists various ‘link’ GUIDs, to
    access order Information
    The Table CRMD_ORDERADM_H will contain you transactions , once you find the GUID of your sales transaction in the table CRMD_ORDERADM_H.
    You then need to check the table CRMD_LINK.
    In this table you will then find a number in 11 = sales. This refers to the table CRMD_SALES. There are also links to many other tables ie Shipping, pricing, org etc.
    CRMM_BUT_SET0140 - for Sales Group, Sales Office, District
    CRMM_BUT_LNK0141 - for Sales Area data
    Transaction CRMD_BUS2000115 allows you to see all sales transactions for a BP. CRMD_BUS2000126 shows you activities for selected BP.
    Regards
    M

  • Custom Infotype - Using Table control in the screen.  IN OM

    Hi,
    I am having a requriement where in I need to create a custom infotype using table control in the screen. I have to create this in OM and I am using PPCI transaction to create the info type. I am able to create the infotype with fields but not table control. Please let me know if any one of you came across and help me with the process I need to follow.
    Thanks in advance.
    Venkat.

    Hello,
    After you create the info type throug PPCi, you can directly go to the Sceen module program created automatically while creating Info type and edit the screen.
    activate it after your changes.
    Regards,
    Srujan.

  • How can I use table control to enter data

    Hi all,
    I want to use table control to enter data, instead of using textboxes.
    So that the user can enter many data at once and just click the save button at the end of the work, only one click.
    How can I use the table control at this context?
    Thanks.
    Deniz.

    Hi deniz,
    go through it:
    /people/ravishankar.rajan/blog/2007/02/23/an-easier-way-of-displaying-and-editing-data-using-table-control
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/code%2bto%2bhandle%2bmultiple%2brecords%2bin%2bbdc%2btable%2bcontrol
    Regards,

Maybe you are looking for