Using text elements in so10 standard texts

How to use text elements in so10 standard texts.

HI,
In DDIC we have two structures :
1. THEAD - Text Header
2. TLINE - Text Lines
SO10 is the tcode..for standard text...
We have a FM to read the text ... read_text...
and save_text is for create text..
this text is are used in SAP scripts...
the standard text is identified by three parameters :
1. Text Name
2. Text ID ( ST for standard text )
3. Language
hope helpfull
Raghunath.S

Similar Messages

Printing text in text area in so10(standard text)

Dear all,
I need to print a text in text area.i mean i need a box in which i can fill text in standard text (tcode-so10).Using box command we will be doing in script.
But is there any possibility that i can solve the issue in so10 itself as i am generating offer letter in pb60 it takes my standard text there itself.So is there any solution for this issue?
This issue is very urgent.
Thank you,
bhavani.

Hi
KEEP a BREAK-POINT and debug the internal table lines how it is coming
some overlap must be happening ..check.
Also check the code where you are getting this text into internal table.
1) One way to debug smartform is to debug the Function Module of that smartforms.
If you want to debug particular smartform node that the solution would be,
insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint.
So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
2) SFTRACE can be used for debugging SMARTFORMS.
Read More here.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
Reward points for useful Answers
Regards
Anji

Using READ_TEXT to read SO10 (standard texts)

Hi,
When we use READ_TEXT F.M for SO10 texts what are the parameters to pass.
ID - ST
LANGUAGE - EN
NAME - Z_TEL (SO10 text id)
OBJECT - ?
What i should pass to OBJECT & what else i need to input!
Thanks in advance.
Thanks,
Deep.

If u r reading text from Purchase Order text then Object ID will be EKKO.It depends what r u reading for.Look at the following code :
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
        CLIENT                  = SY-MANDT
        ID                      = 'F01'
        LANGUAGE                = 'E'
        NAME                    = W_TDNAME
        OBJECT                  = 'EKKO'
      TABLES
        LINES                   = IT_F01
      EXCEPTIONS
        ID                      = 1
        LANGUAGE                = 2
        NAME                    = 3
        NOT_FOUND               = 4
        OBJECT                  = 5
        REFERENCE_CHECK         = 6
        WRONG_ACCESS_TO_ARCHIVE = 7
        OTHERS                  = 8.
Thanks & Regards,
Rock.

To read a SO10 Standard text

Hi,
I have created an SO10 Standard text (ZTEXT), now from a report program i have to Read it's text and use further.
How can I read an SO10 Text from a report Program?
Pls provide some sample code.
Thanks in advance,
Pankaj.

To whom?
please close your thread without showing any consolations(Thanks a lot!) towards people if you don't want to assign the poitns.These points are not giving us food but surly these would be enough feed for needed person.
just read below link carefully specially step 4
[Forum Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]

How to make a 2-column text in sapscript via standard text?

Hello ABAP Gurus! I'm having a hard time thinking on how I'm going to display a two-column text in the MAIN window of the form Using Form Painter(se71) and Standard Text (SO10). Let's put it this way, the scenario is like you are formatting a paragraph on MS word in to two columns by Format > Columns > Two. What am I going to do with this similar situation in SAP? Any help will be highly appreciated. Thanks

This is nothing with standard text.
Call READ_TEXT FM and here use two variables ,read first line and move to first variable ,again read second line and move to second variable.
Thanks
Seshu

How to include std text(Created in So10) in text node?

Hello,
How to include the Standard Text( created in So10 ) into Text Node.
I had typed the Standard text name in the TEXT NAME : ZXXX
      Text Object : TEXT
       TEXT ID : ST
      LAnguage : &CONTROL_PARAMETERS-LANGU&
But, I am unable to look at that particular text in the smart form. I am receiving an error message : "UNable to load the data into front end. ....etc"
It is taking me away to the initial screen.
PLz help!
ANy suggestion will be appreciated.
REgards,
Kittu

I need to include the Standard text created in so10 into a text node in the Smart form.
In samrt form, I had created a Text Node.
In General attributes from the Drop Down menu
--> I had selected INClude Text
--> It has asked me TExt name : ZXXX (Name of the STD text create din so10)
                     Text Obje : TExt
                     Text ID   : ST
                     Language : &CONtrol_Parameters-LANGU&
           It is even activated without any errors. But, it does not display the Text written in the Standard Text. Is there any way that I can include the Standard text into the Text node.......
ANy suggestions will be appreciated...
REgards,
Kittu

How do I Hide the text printed from a standard Text Element in SAP Script?

Hi,
I have created one SAP Script which gets printed from IW33 using a standard print program.
In config the standrad SAP script is replaced by the zsap script.
Since the Zscript is printed from a Standard print program, I had to keep all the text elements used by the original(standard) SAP script.
I only kept the text elemets and commented out the printing part.
But still some values are printing. How do I hide these text element values?
I want to delete whatever its printing from these text element. Icant delete the standard text elemetns , otherwise the standard print program will give error.

Hi,
I am not printing any text under these text element in my zscript.
I had to include these standard text elemets as they are called from the standard print program using which my zscript is getting printed.
for example:
/E OPERATION
Under operation i didnot print anything. Still some values which are passed in text element Operation by the print program is being printed in the form. i want to hide/delete these values.
how do I do that?

Import R/3 SO10 Standard Text to BW Documents

Hi
Please let me know
1. How can Import the Standard Text (SO10) from R/3 to BW Documents?
2. Is there any Function Module to extract the text?
Please let me know since it has become priortized task. Thanks!!
~ Vaishnav

Ok this is easy and not that tough as expected...
I'll write a program that calls the function module READ_TEXT and export the output to the application server and then I'll retrieve the data into BW documents after changing the respective InfoObject as Characteristic is Document Attribute.
~ Vaishnav

How to search a SO10 - Standard text by Content

Hi experts,
I have a standard text content. need to know how to identify the standard text object it is contained in.
Example: I have a form output which has Terms and Condition printed. The content has a word like URL:
texst.test.com. There are lot of standard text objects available in that form and many other forms. We are not able to find the corresponding standard text object.
So like to know whether it is possibel to search and find a standard text object by contect say URL:
texst.test.com?
Let me know whether this is possible to do in SAP?
thx
Ganu

It is not possible to get the standard text header by searching the contents. The tables for standard texts are STXH and STXL. Data is stored in raw clustered format.
As Raveesh metioned, manually looking into the smartform (Windows/Templates) and then using FM READ_TEXT to confirm the contents.
Thats the best possible way to get the standard text details from the contents.

Smart form Text module translation and Standard text

Hi i have a requirement in smartforms in which i need to create text modules and transtale into diffrent languages.
I have created text modules they are in my transport,
when i am translating through SE63 into target language it is not asking for any transport request , Can any one help me regarding how i can assign Transaltion thing to my transport.
Another thing is i require to use standard text, i am not much aware of it also as per my understanding i need to create it through SO10 Transaction , and i can use it in include text please correct me if i am wrong, i need this standart text also in two language but while creating standard text it is not asking transport request, and how i would convert standard text in diff lang and how can i assign to my transport.
Surely i would provide points for the valid reply.
Thanks in advance.

Hi Gudia San,
To transport Standard text, use the standard Report Program RSTXTRAN, execute it, on the selection screen, enter your standard text name as
Text key - name, press F8, it will display a ouput list. Now press F5 key and it will ask for transport request number.
Regards,
Abdul.
P.S: Rewards points, if useful!

Difference jb/w text symblosin script and standard text in scripts

hi to all
can u pols explain about the
difference b/w text symblos in script and standard text in scripts

hi
Default paragraph Paragraph set to * in standard text maintenance
If no form has been assigned to a text, the system automatically assigns the form SYSTEM, which contains minimal definitions for text formatting. There are two ways of formatting texts using forms: Use the standard text maintenance to enter and print the text.
Any kind of text can be included in a form. If no object is specified, then TEXT will be used (standard texts).

Text Symbols
Text symbols acquire their values as a result of explicit assignment. To interactively assign text symbols, in the text editor choose Include  Symbols  Text. This method is available for all text symbols belonging to a text module as well as those of the associated form. Values defined in this way are lost when the transaction is left. If you want to print the text module again, then you must enter the symbol values again. The purpose of the DEFINE command is to provide a means of making this value assignment a permanent part of the text, so that the values are available again when the text module is called again. This command can also be used to re-assign a new value to a text symbol half-way through the text. Syntax: /: DEFINE &symbol_name& = 'value'
/: DEFINE &subject& = 'Your letter of 7/3/95' The value assigned can have a maximal length of 60 characters. It may itself contain other symbols. A symbol contained within the value assigned to another symbol is not replaced with its own value at the point at which the DEFINE command is executed. Rather, this replacement is made when the symbol defined in the DEFINE command is called in the text.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& = 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPscript If, however, the DEFINE command is written using the ':=' character rather than the '=' character, then any symbol contained within the value being assigned is replaced immediately with its current value. The assignment to the target symbol is made only after all symbols in the value string are replaced with their values. The total length of the value string may not exceed 80 characters. The target symbol must be a text symbol, as before.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& := 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPmail
Inserting Text Symbols
Procedure
Inserting a Text Symbol
1. Choose Insert → Symbols → Text.
2. Place the cursor on the desired text symbol.
3. Choose Choose.
4. The system inserts the text symbol.
Editing the Value of a Text Symbol
1. Choose Insert → Symbols → Text.
2. Choose Edit value bearbeiten. The dialog window Value definition for symbol <text symbol> appears.
3. Enter the appropriate value definition.
4. Choose Continue. In the dialog window Text symbols the specified value appears after the name of the text symbol.
5. Choose Continue.
Deleting all Text Symbol Values
1. Choose Insert → Symbols → Text.
2. Choose Delete all values. The system deletes all defined values.
3. Choose Continue.
Using Formatting Options for Text Symbols
1. Choose Insert → Symbols → Text.
2. Choose Options. The dialog window Formatting options for <text symbol> appears.
3. Fill in the fields.
4. Choose Continue.
5. Choose Continue. The system executes the selected formatting option.
regards
ravish
plz reward points if helpful

How to display query variable in text element and format the text element

Hi All,
I want to display the value of the value of variable against fiscper3 and the value of the variable against 0fiscyear in the web application template from the query in the text element in the web template in BI 7 Web application designer.
Also, in the web application designer I need to format the text element in the web application designer to set the text element to center the display change the size and make it bold. I am bit lost I cannot find these properties in the web application designer against the text element.
Appreciate if you could kindly help.
Thanks
Karen

Hi
hope below tags would help you
Re: Search by text on a variable
Re: Need to display text part of TEXT variable in query designer
regards
nag

SO10 Standard text unable to create std text

I am trying to create std text through SO10, once i have cretaed its not saving , plz help me
Edited by: vishwas shastri on Jun 16, 2011 11:05 AM

vishwas shastri wrote:
> those are not reflecting .(saving) .help me plz..
Hello Vishwas,
Are the changes not reflecting or are they not getting updated? Please be specific.
On more question, do you have separate dev & testing clients? And you're changing the ST in dev client & when checking in testing client the changes are not reflected!
BR,
Suhas

What is the difference between Standard text and Text Symbols?

Hi,
1.Difference between Standard text and text symbol,?
2. Which we use Standard symbol?

Text symbol
Text symbols are symbols representing text elements. In fact, a text symbol can be defined for every text elements. The reading of the form is easier in the SAPscript editor. The name of the text symbol must not exceed 32 characters and its value 60 characters. The value assignement can be done in two ways:
- Using the following command: "/: DEFINE &SYMBOL&='TEST_SYMBOLE'"
- Using a standard text symbol.
The text symbol value is temporary stored. When the print program finishes the execution, the text symbol does not exist anymore. The text symbol must have a value when it is declared.
Also check this link,
http://www.supinfo-projects.com/en/2005/forms_sapscript_en/5/
Standard text are good, if you are using them in more than one SAPScript, because you have to maintain them only once, and not in every SAPScript.
It is really good to write rarely changing texts into the SO10 standard texts (for example company name, and address).
standard text is not always used in scripts. when ever u want to display some data u need to use standard text so that the data gets displayed. Say, u have a large piece of document which needs to be printed at end of script... rather than writing the whole thing in script, we create standard text using SO10 and then use the name along with standard text in script.

How to use Standard Text Key in maintenance order header long text?

Dear All,
I have created a standard text key using transaction CA10 and I want to use this in maintenance order header long text. Is there any way to select any standard text key in maintenance order header long text?
Regards & Thanks,
Saif

Hi
To use standard texts, perform the following six steps:
Select the maintenance order and access the operation overview screen using Goto -->Operation overview.
You can enter standard text keys in this screen or in a detail screen for the relevant operation.
Enter a standard text key in the appropriate field and press ENTER .
If the text is longer that the short text line available, the field Text is selected for that operation.
Check the long text and edit it if necessary. To do this, select the operation and choose Operation--> Long text.
The system branches to the text editor screen. If you also entered a short text for the operation and specified that this should not be overwritten by the standard text, you will see the short text displayed in the first line of the editor. The following lines contain the standard text.
Check the standard text and change it if necessary.
Save the final version of the text and return to the previous screen with Goto--> Back.
Save the maintenance order.
Standard texts are created for your system by your system administrator using the Customizing function.
Regards
Makarand Gurjar

Using text elements in so10 standard texts

Similar Messages

Maybe you are looking for