Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM

Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich Wortmann

I would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use.

Similar Messages

Use of Open Catalog Interface (OCI) in ERP

Dear colleagues,
I am not sure if this is the right forum to post this question but can we use Open Catalog Interface (OCI) without having SRM directly in ECC 6.0? If yes what are the prerequisites, customizing, licensing etc.
What we are planning is end users will select material(s) he/she wants to procure from a catalog from a portal (not an SAP portal) and once this is done purchase requisition will be created in ERP system.
Regards
Melih

ECC6.0 MM does support OCI. This works on both the Purchase Req and PO. You can punchout from MM and shop from an OCI compliant source such as MDM, supplier hosted, other catalog tools and then this informaiton is pulled back into the Purchase Req or PO. OCI is delivered with ECC6.0 MM so there should not be any license issues.
Configuration is part of the catalog web service set up and this is where you maintain information such as URL, user id, password, etc.

Difference Between SAP ECC 6.0 and SAP Solution

Dear Experts,
   We are in the process of implementing a new SAP Structure.
    We are taking a hosted model from vendor which is called SBH (Subscription Based Hosting) of SAP Solution
So my question to all experts is that, what is the exact difference between SAP ECC 6.0 and SAP Solution SBH model.
   If any comparison chart, it would be helfull.
Do reply asap.
Thanks in advance,
Nilesh Jain

Hi Nilesh,
Looking at the image below, you will find out that ECC6 is under SAP ERP, and SAP ERP is under SAP Solution:
SAP solution is of a bigger element and ECC 6 is a component of it.
Regards,
Rod

Open Catalog Interface (OCI) - Is CRM/ISA ready to be an External Catalog?

I have found much information here and on help.sap.com talking about how to set up an external catalog to be part of our catalog(s). But, there is a severe lack of information to educate myself as to whether our catalog(s) are ready to be added as an external catalog to our customer's SRM system for example.
The only valuable information I have been able to find on how to be sure that our CRM/ISA Partnershop can be used by our business partners in their various (SRM) procurement systems is here:
http://help.sap.com/saphelp_crm40sr1/helpdata/en/73/fd147fcaaf41489508aaac8e3e37b5/frameset.htm
We have a specific request that our CRM/ISA Partnershop be made available via our business partner's SRM system. I can find no guide to help me provide the requested information without basically just guessing on my part.
This is what they provided as a worksheet to return.
I assume the following or would like additional input:
1) They will need a Userid and Password.
2) For Language, we currently only support EN. Would I enter EN or just leave blank?
3) What do the following refer to? (These are the fields as requested and their suggested value by our customer)
~OKCODE       ADDI
~TARGET       _top
~FORCETARGET       YES
~CALLER       CTLG
HOOK_URL       (Assumed to be blank)
4) These are the required OCI fields they would be expecting from the our catalog, but they can accept all OCI Release 4.0 fields...Assuming the connections from the above settings are made properly, will CRM automatically provide the approrpriate detail or do I need to set something somewhere? All the XCM/DCM config settings for OCI seem to deal with an incoming External Catalog, not outgoing.
OCI fields
<input type='hidden' name='NEW_ITEM-QUANTITY[1]' value='3'>
<input type='hidden' name='NEW_ITEM-DESCRIPTION[1]' value='Descriptio'>
<input type='hidden' name='NEW_ITEM-UNIT[1]' value='DZN'>
<input type='hidden' name='NEW_ITEM-PRICE[1]' value='1.62'>
<input type='hidden' name='NEW_ITEM-LEADTIME[1]' value='5'>
<input type='hidden' name='NEW_ITEM-CURRENCY[1]' value='USD'>
<input type='hidden' name='NEW_ITEM-MATGROUP[1]' value='44121704'>
5) Do I need to 'do' anything not listed above to be sure our catalog(s) are ready to perform as requested?
Thanks for any clarification/links, etc
I've spent weeks off and on now to try to determine an answer I could feel confident in.

1/25/07 - Found a bit more info, but still need help determining if there are any additional settings/configs we need to make before starting to test with our Business Partner.
http://help.sap.com/saphelp_crm40sr1/helpdata/en/19/3a74482f5811d5b3890050da4cccf0/frameset.htm
I did these steps already, but have not tested yet:
Customizing and Settings in CRM / Internet Sales
Settings for receiving purchase orders in CRM
Purchase order without reference to a quotation:
In the CRM Business Connector, an XML purchase order is received via HTTP and it is converted into a sales order IDOC. This IDOC is then transferred to CRM and is posted there.
The delivered mapping service expects a purchase order in the OLD_EBP XML format, which is transformed into a NEW EBP XML, xCBL and finally a CRM IDOC XML.
The following settings must be made in CRM:
· Creating a partner profile for the sender
Path in SAP Menu
Tools -> Business Communication -> IDoc-Basis -> Administration -> Partner profile.
Partner type: Customer
Partner number: Number of the sold-to party in CRM
Transaction code: APLI (Individual IDoc processing)
Message type: CRMXIF_ORDER_SAVE_M
(key fields of table EDPP1:
-PARNUM partner number
-PARTYP partner type)
·         To view CRM address management errors in the document, the parameter CRM_USER_LEVEL must be set to value 9.
Path in SAP Menu
System -> User profile -> Own data -> Parameters.
I have asked my Basis contact to look into this portion:
Business Connector
Install a Business Connector 4.0 or higher.
Required packages:
· Sap_crm
· Sap_crm_customizing
· XSLT (only for BC 4.0, not required for BC 4.6)
After processing the purchase order that was received first, an inactive routing rule is created that is completed and activated.
Path in BC
BC Manager -> Adapters -> Routing -> Edit.
Transport: ALE (R/3 IDoc)
SAP Destination:
The ports must be activated and the service EbpXmlToRfc must be accessible before the Business Connector can receive documents.
Some CRM settings are hard coded in the transformations. They are in the file BasicOrderSettings.xsl, that are in the directory ...ServerpackagesSap_crmxsltincludesxcbl2sapcrm_xif.
These are:
Transaction type: TA (standard order)
Item object type: BUS2000131(sales item CRM)
Text ID under which the order text is created in the CRM order: 1000 (customer note)
Make sure that all of the available Business Connector patches are installed.
Our customer contact says they went with WebMethod instead of Business Connector, but I'm hoping we can make it work using BC without having to research yet another piece of the puzzle.
Any additional detail/advice from anyone that's set up their Partnershop to be connected to SRM EBP via OCI?
Message was edited by:
        Mike Anecito
    1/25/07

Open Catalog Interface (OCI)

There is an OCI interface for SAP R3. Is there an OCI interface for Business One?

David,
The only interfaces with respect to integrating with SAP Business One are using the SAP Business One SDK which provides COM API's for integration at the data level (DI API) and the user interface level (UI API).
There is also the DI Server which is a wrapper for the DI API allowing SOAP integration.
Also you can integrate with SAP Business One using the DI Server and the Business One Web Services or B1WS.
The other method of integration is using the SAP Business One Integration for SAP NetWeaver which connects SAP Business One with MySAP using the Business One DI API and the R/3 ALE or XI connection components. OCI for Business One is not available.
Eddy

A universe from SAP ECC 6.0 and SAP BW 7.3... Possible?

Hello,
We are looking to create one universe from two SAP data sources;
1) SAP ECC 6.0 with EHP5 and
2) SAP BW 7.3
Can this be done?
In UDT there is a SAP BW connection that can satisfy need for cubes but connection to ECC is a challenge.
I think it's possible in in CR 2011 but exploring webi options.
Any suggestion / work around ?.
Thanks,

Hi,
With Feature Pack 03 (ramp up registration open now, and RU starts ~16 March), you will be able to use IDT driver to access ECC (R/3) data. and generate a universe.
In the current, 4.0 SP02 Patch2.x codeline, you cannot do the above.
today, You can create a Multi Source-enabled Universe (UNX in IDT) for relational BW-SQL access to underlying BW table schema (by passing OLAP engine and all BEx semantic concepts.)
But - if you have the XI 3.1 Data Federator product already - then you can go from IDT, and use the DF XI3.1 as a datasource into a UNX universe.
I have not tried combining BW-SQL and DF 3.1 connections into a MSU universe.
Yes, using CR 2011, you can consume ECC.
I'd recommend joining ramp up (go via your account team) and evaluating the new features asap.
Regards,
H

CRM Open Catalog Interface (OCI) - What data is sent from CRM/ISA to SRM?

RE: CRM4
We have an SRM customer that is able to access our online catalog as expected, create a shopping cart and transfer it to their SRM system. However, they're asking that we provide additional information on the item(s) and I can not determine what data is sent in the first place, let alone how to add additional information. Specifically, they require that the UNSPSC code is included in the data...the format for which should look something like this:
NEW_ITEM-MATGROUP = 465120000
I have determined the 'how' the data is sent (via HTML if OCI_VERSION = 1) and the file that's called once the SRM customer clicks the TRANSFER button on our CRM/ISA (ocilinessend.jsp)
But, I am unable to determine the 'what' data is sent.
According to the javascript file, here's the code that is activated:
<%-- send list with oci lines --%>
<form action="<%= request.getAttribute(OciLinesSendAction.OCI_HOOK_URL)%>" method="post"
name="SUBMITFORM" target="<%=request.getAttribute(OciLinesSendAction.OCI_TARGET)%>">
<% String param = (String)request.getAttribute(OciLinesSendAction.OCI_OKCODE); %>
<% if (param != null) { %>
    <input type="hidden" name="<%=OciLinesSendAction.OCI_OKCODE%>" value="<%=param%>">
<% } %>
<% param = (String)request.getAttribute(OciLinesSendAction.OCI_CALLER); %>
<% if (param != null) { %>
    <input type="hidden" name="<%=OciLinesSendAction.OCI_CALLER%>" value="<%=param%>">
<% } %>
<% OciLineList ociLineList =
    (OciLineList)pageContext.findAttribute(OciLinesSendAction.OCI_LINE_LIST); %>
<% for (int i=0; i < ociLineList.size(); i++) { %><%=ociLineList.get(i)+"\n"%><% } %>
</form>
So, does anyone know how this works? How does data get flagged as being relevant to be sent via an OCI Transfer?
I can not believe how limited the SAP documentation is on the CRM side of this connectivity...the SRM side has a huge amount of documentation, but none of it specifically deals with how to get a CRM connection up and running. You'd think they'd especially want to have customers using SAP on both sides of the connection...

I have made some progress finally.
The items that the .jsp file sends are apparently triggered when the customer clicks on the Transfer button and the FM CRM_ISA_BASKET_GETITEMS_BBP runs.
The FM ends up pulling data from the UI Structure CRMT_ISALES_BASKETITEM_BBP which you can modify the fields sent by using transaction CRMC_MAP to add a New Entry -> UI Field, named MATGROUP with Object ORDERADM_I and one of the 42 Obj.Field's available. I ran a test with our customer and they confirmed that the MATGROUP was now indeed being sent during the transfer.
So, now my dilemma is trying to figure out which Obj.Field already is set up for UNSPSC numbers or if there is another Object in CRM that I should look in.
In the IMG, there are SRM settings for UN/SPSC numbers, but I can not find a corresponding CRM setting.
Anyone have an idea on which Obj.Field we should use ... or perhaps one which we can map from our ERP backend to CRM that will work without having to create a new Obj.Field, which is really not what we want to have to do.

PCUI and OCI (Open Catalog Interface)

Hi,
we want to integrate a external catalog into the PCUI application qutation. The goal is to take over the shopping basket of the catalog into a Quotation. The data which should be taken over are products out of the external product catalog. Therefore the open catalog interface (OCI) should be used. The external catalog sends the shopping basket selected by the user via a HTTP Post to a so called Hook-URL which is provided by the calling application (PCUI). The calling application (PCUI) will retrieve this POST and take over the data send by the HTTP Post.
My question is now if something like that is possible with PCUI framework?
Thanks for your help.
Regards,
Mario

Thanks for the quick and succinct reply.

Is OCI (Open Cataloge Interface) supported from MM or SD

Hello.
My customer has installed SAP ERP, but do not have SAP SRM. We plan to implement a punch-out from SAP to a web site of Cisco with use of OCI.
I do find a lot of information about OCI related to SRM, but none related to ERP.
Does anybody know wether OCI somehow is support by ERP?
Geir Sunde, tlf. +47 977 555 97

Hi,
Open Catalog Interface is related to SAP SRM it is nothing to
do with SAP R/3.When we are using the Catalog for creating a
shopping basket this interface is the link between the Catalog
and the SRM server.
Please Post this message in this forum in SRM general you
will get some Inputs but definitely it is NOT supported by
SAP R/3.
We plan to implement a punch-out from SAP to a web site of Cisco with use of OCI.
I think you have to IMPLEMENT -SAP SRM only
G.Ganesh Kumar

PPDS: I have a setup matrix in SAP ECC 6.0, and want to transfer the same to APO using Core Interface.

PPDS: I have a setup matrix in SAP ECC 6.0, and want to transfer the same to APO using Core Interface. Has anyone done it before?

Hi Subhash,
Please open this link to see the details:
http://help.sap.com/saphelp_scm70/helpdata/EN/89/bd3e42ce98033be10000000a1550b0/frameset.htm
You perform the data transfer in the following sequence:
Plant
Setup groups
Work centers
Routings
You check the setup groups in SAP APO.
You create the setup matrixes in SAP SCM.
Thanks, Marius

ALV report using the field catalog

which is the quickest way to generate an ALV report using the field catalog merge. without needing to build the field catalog manually .
is it easier to create a structure and passe it in the field catalog merge . if yes can i have an example plzzzz

hI
Supports the creation of the field catalog for the ALV function modules
based either on a structure or table defined in the ABAP Data
Dictionary, or a program-internal table.
The program-internal table must either be in a TOP Include or its
Include must be specified explicitly in the interface.
The variant based on a program-internal table should only be used for
rapid prototyping since the following restrictions apply:
o Performance is affected since the code of the table definition must
always be read and interpreted at runtime.
o Dictionary references are only considered if the keywords LIKE or
INCLUDE STRUCTURE (not TYPE) are used.
If the field catalog contains more than 90 fields, the first 90 fields
are output in the list by default whereas the remaining fields are only
available in the field selection.
If the field catalog is passed with values, they are merged with the
'automatically' found information.
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
                         Data declaration
                         Data retrieval
                         Build fieldcatalog
                         Build layout setup
*& Report ZDEMO_ALVGRID                                               *
*& Example of a simple ALV Grid Report                                 *
*& The basic requirement for this demo is to display a number of       *
*& fields from the EKKO table.                                         *
REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
*               I.e. Field type may be required in-order for
*                    the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
* gd_layout-totals_only        = 'X'.
* gd_layout-f2code            = 'DISP'. "Sets fcode for when double
*                                         "click(press f2)
* gd_layout-zebra             = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
*            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
*            i_callback_user_command = 'USER_COMMAND'
*            i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
*            it_special_groups       = gd_tabgroup
*            IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
*            is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL

Help! with creating a J2ME program using the http connectivity interface

So this is what I have to do using the http connectivity interface:
1.Creating two threads – one for communication (receiving and sending) and the other (main) thread will be for interaction with the user.
2.The main thread will make use of three midlet forms. The first form will ask for web page address (URL) and separately for a delimiter which will separate the words in the URL document, the third form will display the ratio of all symbols on the page and the number of occurrences of the delimiter specified
3.The second thread should perform http connectivity to the WWW, utilise the web page address supplied and connect to the appropriate web page and read its content, count all symbols on the chosen page, count the number of occurrences of the delimiter given as user input on the same form as the web page address, calculate the ratio between the two and pass this information to the first thread to display.
I have many questions but my main concerns are:
*1. How to communicate using HTTP interface within a thread*
*2. What is a delimiter in the context above and how should it be implemented*
I've been thrown in at the deep end with little programming experience with this assignment. If anyone can share a similar example or answer my concerns I'd be more than happy.
Thanks in advance.

thelane wrote:
hi thanks for the response.
As I said I have coded in other languages before, but this is a new for me in java. I needed to get it working quickley. Now I can clean up.
I will have a look at method and see how I get on.
ANy similiar examples would be great.
Thanks.I can certainly give you a similar example.
Say you have code such as this:
int a = 10, b = 11;
int temp = 1;
for(int i = 2; i < a; ++i) {
temp *= i;
System.out.println(a + " factorial is " + temp);
temp = 1;
for(int i = 2; i < b; ++i) {
temp *= i;
System.out.println(b + " factorial is " + temp);Each section of code takes the factorial of the current variable an outputs it. The factorial code can be placed within a method to be called more easily, as such:
public void factorial(int num) {
int temp = 1;
for(int i = 2; i < num; ++i) {
temp *= i
System.out.println(num + " factorial is " + temp);
}Then, whenever you need to call it, you can just do so:
int a=10,b=11,c=12;
factorial(a);
factorial(b);
factorial(c);

HELP!!! Message - (One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) How do I get this to stop?

I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor. Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button. How do I get this to stop? Please be specific, I am challenged when it comes down to computers.
Thank You

This was extremely annoying for me, also. I started uninstalling unneeded Sony applications to try to narrow down the problem. It turned out not to be a Sony application... it is some functionality built into the bluetooth driver software package by Broadcom. Uninstalling the bluetooth package (via the control panel) takes care of the problem. Itunes also boots up way quicker. But uninstalling it will remove features related to bluetooth and nfc. For me, that isn't an issue, since I don't use them. Since you said you're "computer challenged" I would probably just send an email to sony complaining about the problem. They'll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
Side note: the Broadcom package is huge... nearly 1GB in size. Which is crazy. I can't imagine what it does considering the size of it. Entire operating systems can take up less storage. Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories.

I'm trying to draw a candlestrick chart without using the open and close fields

I'm trying to draw a candlestrick chart without using the
open and close fields, however I am seeing nothing on the cart. The
horizontal and vertical axis are displaying their labels correctly
for the data. Any ideas what is going on here?

"nikos101" <[email protected]> wrote in
message
news:gi5rh4$ptn$[email protected]..
> Is it not to draw the line between the high and low
then? The data I
> recieve has no open and close data :(
>
I've never seen a candlestick that didn't have all 4
properties.
You may find the floating columns do what you want here
http://demo.quietlyscheming.com/ChartSampler/app.html
or possibly the
vertical line type will work for you.
HTH;
Amy

How can I use the open in " My application" option to open image attachments.?

How can I use the open in " My application" option to open image attachments.?
I am trying to use the uti's given in the apple docs but just unable to do it however its working perfect for pdf and rtf files.
please help needed urgent.

Perhaps you should Contact the iTunes Store Customer Service:
Apple - Support - iTunes Store - Contact Us

Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM

Similar Messages

Maybe you are looking for