Using XI with SCM ICH

Hi All,
I'm designing an interface to post VMI orders (EDI 852)to SCM ICH via XI. Since I am very new to SCM, trying to understand how the data gets posted to ICH. We are sending XML messages, but are IDoc's or BAPI's used to actually post the data. Where does the data actually 'live'?
Thanks,
Maura

Hi Maura,
the new way to send data to SAP via XI are Proxies. So there are no IDocs or RFCs in the backend SCM but Proxies. If you know the message interface from XI, you can locate the Proxy in transaction SPROXY of your SCM system (by component and namespace). Behind that proxy is a piece of ABAP which takes care of the inbound processing. Proxies can be monitored via transaction SXI_MONITOR in the receiving system, so that would be similar to the IDoc monitor in IDOc processing.
Regards
Christine

Similar Messages

Using TopLink with SCM

Hi!
I was working with my .mw file with OSCM source control instead of appear this error:
"An unexpected error has occurred.We are sorry for the inconvenience.
Messagge:
EXCEPTION DESCRIPTION: File already exists: [C:\Documents and Settings\mpedretti.DSI\Mis documentos\DocumentosToplink\Carpeta nueva\Table\Nueva 2.xml]
Stack trace:
Throwable Class Name:
oracle.toplink.xml.XMLDataStoreException
Message:
EXCEPTION DESCRIPTION: File already exists: [C:\Documents and Settings\mpedretti.DSI\Mis documentos\DocumentosToplink\Carpeta nueva\Table\Nueva 2.xml]
Stack trace:
LOCAL EXCEPTION STACK:
EXCEPTION [TOPLINK-13005] (TopLink - 9.0.3 (Build 423)): oracle.toplink.xml.XMLDataStoreException
EXCEPTION DESCRIPTION: File already exists: [C:\Documents and Settings\mpedretti.DSI\Mis documentos\DocumentosToplink\Carpeta nueva\Table\Nueva 2.xml]
     at oracle.toplink.xml.XMLDataStoreException.fileAlreadyExists(Unknown Source)
     at oracle.toplink.xml.XMLFileStreamPolicy.getWriteStream(Unknown Source)
     at oracle.toplink.xml.XMLFileStreamPolicy.getNewWriteStream(Unknown Source)
     at oracle.toplink.xml.XMLFileAccessor.getNewWriteStream(Unknown Source)
     at oracle.toplink.xml.XMLAccessorStreamPolicy.getNewWriteStream(Unknown Source)
     at oracle.toplink.xml.XMLInsertCall.getWriteStream(Unknown Source)
     at oracle.toplink.xml.XMLWriteCall.execute(Unknown Source)
     at oracle.toplink.sdk.SDKAccessor.executeCall(Unknown Source)
     at oracle.toplink.publicinterface.UnitOfWork.executeCall(Unknown Source)
     at oracle.toplink.sdk.SDKQueryMechanism.executeCall(Unknown Source)
     at oracle.toplink.sdk.SDKQueryMechanism.executeNoSelectCalls(Unknown Source)
     at oracle.toplink.sdk.SDKQueryMechanism.insertObject(Unknown Source)
     at oracle.toplink.internal.queryframework.DatabaseQueryMechanism.insertObjectForWrite(Unknown Source)
     at oracle.toplink.queryframework.InsertObjectQuery.executeCommit(Unknown Source)
     at oracle.toplink.internal.queryframework.DatabaseQueryMechanism.performUserDefinedWrite(Unknown Source)
     at oracle.toplink.internal.queryframework.DatabaseQueryMechanism.performUserDefinedInsert(Unknown Source)
     at oracle.toplink.internal.queryframework.DatabaseQueryMechanism.insertObjectForWrite(Unknown Source)
     at oracle.toplink.queryframework.WriteObjectQuery.executeCommit(Unknown Source)
     at oracle.toplink.internal.queryframework.DatabaseQueryMechanism.executeWrite(Unknown Source)
     at oracle.toplink.queryframework.WriteObjectQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.DatabaseQuery.execute(Unknown Source)
     at oracle.toplink.publicinterface.Session.internalExecuteQuery(Unknown Source)
     at oracle.toplink.publicinterface.UnitOfWork.internalExecuteQuery(Unknown Source)
     at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
     at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
     at oracle.toplink.internal.sessions.CommitManager.commitAllObjects(Unknown Source)
     at oracle.toplink.publicinterface.Session.writeAllObjects(Unknown Source)
     at oracle.toplink.publicinterface.UnitOfWork.commitToDatabase(Unknown Source)
     at oracle.toplink.publicinterface.UnitOfWork.commitRootUnitOfWork(Unknown Source)
     at oracle.toplink.publicinterface.UnitOfWork.commitAndResume(Unknown Source)
     at oracle.toplink.workbench.ui.BldrSession.saveProject(Unknown Source)
     at oracle.toplink.workbench.ui.BldrMainView.saveProject(Unknown Source)
     at oracle.toplink.workbench.ui.BldrMainView.saveSelectedProjects(Unknown Source)
     at oracle.toplink.workbench.ui.BldrActionManager$104.actionPerformed(Unknown Source)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
This happen when I tried to save the project. Any suggestion??
What are the best practices to apply SCM using Toplink?
Thanks!!
Matias

Whenever this happens you should be able to do a "file>save as" and save the project in a new directory -- at least you won't be loosing your work.
Basically I think the problem is either that somehow you corrupted the project with checkin/checkout process, or you did not check out a file that the Mapping Workbench is trying to update when you save the project.
10g Mapping Workbench, I have heard, is going to have more intelligence in the area and note ahead of time which files need to be checked out when you save your project. I think a developer preview will be available any day now, keep your eyes peeled to the OTN webpage for TopLink.
The mapping workbench reference guide has a couple pages that talk about how to use it with SCM systems. In TopLink 903 these docs are shipped with TopLink. See page 1-11 for more info.

How to use BC4J with JDeveloper 9i in a Team

Hello
I'm not sure if I'm to stupid, but to say the truth I didn't found the clue how to share a BC4J Application between several develeopers. Maybe someone can give me a hint.
That's my situation:
Our team is going to develop a web application using BC4J and BC4J-JSP, nothing special I think.
But my problem is, that BC4J and especially the wizards refer to a lot of different files. Even simple changes often result in multiple files being changed in different parts of the project.
Creating a view link between view objects in two packages for example changes the view objects in both packages. Also the project (.jpr) file or several "BC4J.xcfg" files are changed very often.
So it is not easy to find parts of code from which I can say they are owned by one developer and others which are owned by another. Most often, if you have to merge the work of different developers, you have to edit the BC4J-XML-Files using an external editor. Or did someone find a better way? Please tell me!
So, what is the best way to share code between developers?
Should I partition the application by packages?
- advantage:
it allows a fine partitioning
- disadvantages:
it has the great danger that BC4J makes changes in other packages which will be overseen when merging.
Should I create a projects for each developer and distribute code between the projects using libraries?
- advantage: no unseen changes will happen, as the libraries are readonly.
- disadvantages: no view links between view objects in different projects (Libraries) are possible! Also a lot of "load errors" can occure when updating a library, which have to be manually corrected in the dependent projects.
Are source code management systems a real help in this problem or do they just "manage" the problem? I already tried SCM and PVCS but was not very happy with the way of working. As JDeveloper is not "really easy" to use with theese tools.
So I would like to get any hints how other developers are dealing with this problem. Are you using BC4J with JDeveloper 9i in a team? Please tell me how do it and how you have partitioned your application.
Thanks in advance
Frank Brandstetter

Hi,
I'm not sure whether my answer is good enough for you, but it might help.
First of all, you have to use JDev 9.0.3, because 9.0.2 has big problems with associations/view links between objects in different projects.
Creating a view link between view objects in two packages for example changes the view objects in both packages. Also the project (.jpr) file or several "BC4J.xcfg" files are changed very often.This is not completely true in 9.0.3, as you may choose not to create an accessor in the imported object (and usually you don't need it neither!). As for bc4j.xcfg, there is a trick: define a "standard" database connection name to use all over your project! This will prevent modifying these files all the time!
Should I create a projects for each developer and distribute code between the projects using libraries?
- advantage: no unseen changes will happen, as the libraries are readonly.
- disadvantages: no view links between view objects in different projects (Libraries) are possible! Also a lot of "load errors" can occure when updating a library, which have to be manually corrected in the dependent projects.I would say, projects for each application component, which by chance will be managed by a single developer at a time.
As for the disadvantages, in 9.0.3 you are able to properly create associations and links using read-only objects. Hopefully, the release version will solve some generation inconsistencies...
Concerning the errors that occur when modifying a library, this might be balanced by the relative independence of the components... If you are able to develop following the dependency tree, you will not meet the problem very often.
Are source code management systems a real help in this problem or do they just "manage" the problem? I already tried SCM and PVCS but was not very happy with the way of working. As JDeveloper is not "really easy" to use with theese tools.Indeed, I do not have a SCMS really able to manage merges in the BC4J XML files... We rather try not to arrive there!
So I would like to get any hints how other developers are dealing with this problem. Are you using BC4J with JDeveloper 9i in a team? Please tell me how do it and how you have partitioned your application.I really hope that my hints will help.
Regards,
Adrian

Problems with SCM server 10g and Forms Developer 6i&9i

Hi,
I installed SCM server 10g and try to use it with Forms developer 6i and 9i. The connection to the server works ok but when I choose the container from Source Control Options to check in forms they always go one level higher in the container hierarchy. With Forms developer 10g it is working fine. What might cause this?
Thanks,
Tomi

You are missing one key piece of information from your email - the error message that you got.
can you specify what was the error number?
Once you have this number I'll suggest that you look it up on the online documentation of the database available on otn (just do a search on OTN with the error number).

Portal Integration with SCM component

Hi,
Can we integrate EP7.0 with SCM 5.0 . In portal system adminstartion I can see only SAP_R3,SAP_CRM,SAP_BW.
I can not see other compoenets like SAP_SCM , etc.. since there is no system like SAP_SCM how to integrate . Is it possible?
Please suggest.
Thanks,

Hi,
What type of integration do you need ?
Isn't SCM also running on top of NetWeaver/R3 ? If so, just use system type SAP_R3.
Regards
Dagfinn

Calling BSP's from SCM ICH

Hello all,
i need some information about calling BSP's from SCM ICH(inventory collaboration hub) into EP. for this what steps i need to do.
pl suggest me
thx
pradeep

<i>when i was trying to call bsp from ICH..it shows..loading..but not coming anything...</i>
One of the possible reasons could be that at the back end ABAP is trying to compile. Go to that particular BSP application and activate it manually and then try it in portal.
<i> maintained correct path for WAS. do i need to activate anything in BSP side?
What parameters do i put into
Application parameters
BSP definition type
BSP application...</i>
if this is the first time you are going to run BSP application there are certain nodes in SICF tree should be activated. Check out OSS Note# 517484 for info on this.
BSP definition type => BSP Application (if you have aliases defined and want to use it then you should use BSP alias)
BSP application => your BSP applicatio name
Start page => start page of your BSP application (default.htm)
System => the back end system alias to which this BSP should connect to (e.g DEV001)
Hope this helps.
Regards
Raja

Portal with SCM

Hi,
Can we integrate EP7.0 with SCM 5.0 . In portal system adminstartion I can see only SAP_R3,SAP_CRM,SAP_BW.
I can not see other compoenets like SAP_SCM , etc.. since there is no system like SAP_SCM how to integrate . Is it possible?
Please suggest.
Thanks,
Kristene

Hi,
What type of integration do you need ?
Isn't SCM also running on top of NetWeaver/R3 ? If so, just use system type SAP_R3.
Regards
Dagfinn

HT202667 Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get it transferred over from her Home Sharing account to mine so that I can use it with my PC?

Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get her Home Sharing account transferred over to mine so that I can use it with my PC? Thanks!

As Winston Churchill wrote, however you might want to do a factory reset on the Apple TV.
This way all information pertaining to your daughter will be removed from the device. Specifically if see was sign into any of the streaming service, Netflix, Hulu, etc. her credentials will still be associated with this Apple TV, doing a factory reset will remove all that and make it as if you purchased the device and just plugged it in.
regards

OPEN CURSOR using a WITH clause in the select query

Hi,
I am using Oracle 9i. I have a requirement where I have a REFCURSOR as an OUT parameter for my procedure. I have declared the TYPE and created the procedure.
In the procedure, I am using OPEN <cursor_name> FOR <query>;
Ideally this works in most of the cases that I have tried earlier. However, in the current case I am using a WITH clause in my query to get the results.
I need help in understanding if the above mentioned syntax would not allow me to use the WITH clause in the query.

What error do you get , seems to work ok for me on 10g
SQL> begin
2 open :cv for 'with x as (select * from emp) select * from x';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> print :cv
     EMPNO
ENAME
JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7521
WARD
SALESMAN        7698 22-FEB-81       1250        500         30
      7566
JONES
MANAGER         7839 02-APR-81       2975                    20
     EMPNO

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

In the Music tab of iTunes, do you have 'Include Voice Memos' checked?

I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way?

I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way? I appreciate that it is a different computer but I am now the end user of both devices and I was just wondering if it was possible.
Thanks,
Sean

The answer would be in your software license agreement for Aperture. However if you cannot locate it you can ask in the Aperture forum, the link for that is:
https://discussions.apple.com/community/professional_applications/aperture
However I believe you can have Aperture installed on two machines however only one may be using it at a time.
On the new iMac launch the Mac App Store - Purchased - look for Aperture and download to your new machine.

How do I use LDAP with iMQ 2.0?

I am looking for an example to see how to use LDAP with iMQ 2.0.
I was able to set up the config settings to access a local LDAP,
but iMQ authentication still rejects valid logins.
Let me know if I can find more info someplace.

You can also find an example I put togther in the Sun One knowledge base.
If you go here:
http://knowledgebase.iplanet.com/NASApp/ikb/index.jsp
Search for article 7772
Alternatively here is the direct link
http://knowledgebase.iplanet.com/ikb/kb/articles/7772.html

How do you use Struts with Jboss Portal

I am trying to use strust with jboss portal but I am getting the following error:
An error occured while rendering window 'default.MyPortlet2.myportlet2Window'
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71 68: List searchresult = (List) request.getAttribute("searchresult"); 69: %> 70: Stacktrace:
I am getting this is in the log file
Caused by: org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71
68: List searchresult = (List) request.getAttribute("searchresult");
69: %>
70: <%
71: for (Iterator itr=searchresult.iterator(); itr.hasNext(); )
72: {
73: testPackage.net.dao.hibernate.WorkList workList = (testPackage.net.dao.hibernate.WorkList)itr.next();
74: %>
Stacktrace:
at org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.execute(PortletRequestDispatcherImpl.ja
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.portal.server.servlet.CommandFilter.doFilter(CommandFilter.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.ja
... 238 more
Caused by: java.lang.NullPointerException
at org.apache.jsp.WEB_002dINF.jsp.SearchResultPage_jsp._jspService(SearchResultPage_jsp.java:152)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
... 255 more

I am trying to use strust with jboss portal but I am getting the following error:
An error occured while rendering window 'default.MyPortlet2.myportlet2Window'
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71 68: List searchresult = (List) request.getAttribute("searchresult"); 69: %> 70: Stacktrace:
I am getting this is in the log file
Caused by: org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71
68: List searchresult = (List) request.getAttribute("searchresult");
69: %>
70: <%
71: for (Iterator itr=searchresult.iterator(); itr.hasNext(); )
72: {
73: testPackage.net.dao.hibernate.WorkList workList = (testPackage.net.dao.hibernate.WorkList)itr.next();
74: %>
Stacktrace:
at org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.execute(PortletRequestDispatcherImpl.ja
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.portal.server.servlet.CommandFilter.doFilter(CommandFilter.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.ja
... 238 more
Caused by: java.lang.NullPointerException
at org.apache.jsp.WEB_002dINF.jsp.SearchResultPage_jsp._jspService(SearchResultPage_jsp.java:152)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
... 255 more

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

iPod touch User Guide (For iOS 4.3 Software)

How do I use user_datastore with a feeder proc to add an mdata section?

Hi,
I have text data spread across a number of different tables. I have created a user_datastore with a feeder procedure that creates an xml document which is then indexed into a dummy column on the parent table. This works fine. However I need to add an mdata section to the index, via my xml document. I haven't seen any examples of this being done in conjunction with the ctxsys.auto_section_group option of the create index statement, and am wondering if it is possible?
Could somebody furnish me an example of how I achieve this.
Oracle 11.2.
Thanks
Ralph

You can't use MDATA with AUTO_SECTION_GROUP. AUTO means it automatically assigns zone sections for every tag it finds - if you want anything other than zone sections you must use BASIC_SECTION_GROUP, XML_SECTION_GROUP or HTML_SECTION_GROUP and manually define your sections.

Using XI with SCM ICH

Similar Messages

Maybe you are looking for