USPS international email hoax - I clicked on it any issues?
I received an Apple email with a link to USPS that indicated I needed to click on a link to print a receipt. Nothing happened, but I realized after that it was a hoax. I am using OS X 10.9.3 on a MacBook Pro.
Do I need to be doing anything to fix this?
You can forward phishing email to Apple > [email protected]
If you receive anything similar again, never click on any links. Just forward the email to Apple instead then delete the email.
Might be a good idea to change your Apple ID passsword if you have not already done so > Apple ID: Changing your password
Similar Messages
-
Does spam drain email filter slow down or have any issues with mozilla thunderbird ?
i installed spam drain on my iphone as an app, it really removed the amount of spam getting through to my Thunderbird account on my iphone.
the level of spam on my pc Thunderbird account can be filtered but not on iphone as far as i know?
since i installed teh app on my i phone it works great and reduces all the spam , but my emails on pc sometimes hangs and goes really slow resulting in a restart?
is ther any know conflicts between installing the spam drain on my iphone to filter my thunderbird email account and resulting in it slowing up or freezing when working on it on my pc?''... my Thunderbird account on my iphone.''
There is no such thing like a 'Thunderbird account'. Mozilla isn't an email provider.
''is ther any know conflicts between installing the spam drain on my iphone to filter my thunderbird email account and resulting in it slowing up or freezing when working on it on my pc?''
No. What is your anti-virus software on the PC? -
Outlook 2010 - "Reply To" linking to wrong Exchange 2010 Internal Email Address
Hi,
One of my internal email users (Exchange 2010 Enterprise) compiled an email from within Outlook 2010 and sent it to a specific internal colleague with a CC to two other internal colleagues plus two external contacts.
They all recieve the email successfully but if any of them (internal & external contacts) try to "Reply" or "Reply All" the "To" for the new email is automatically populated with a completely different and unrelated
internal email account instead of that of the original sender? This occurs when attempted from either thier Outlook or OWA environments.
This appears to be a one off issue, as the original recipient of the problem email has recieved other emails from the same sender both just before and soon after which all behave correctly.
I have looked at the View Source information for the recieved and confused email from Outlooks perspective and there is no reference within the source to the wrong account that get consistantly used for the
purposes of a Reply.
I have never experienced this sort of problem before since administering Exhange etc and would like to understand how it can randonly occur.
Any help would be most welcome.
Regards,
MarkHi,
Does this issue happen to other emails or just the certain one?
On the sender side, please go to Send Items folder, find and open the problematic message. Click on File > Properties and check if the user set “Have replies sent to” in the Delivery options section:
If the original email was set with this option, when we click Reply, it will send email to the people typed in the box.
We can also check the message properties on the recipient side.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support -
Internal emails not being received.
Hi,
We have come across an issue in our office with our blackberrys. If we send emails from our Blackberrys to another internal email address it arrives on our computers in our outlook but not on the blackberry. It doesn't fail or not sent it goes as if its sent but never arrives on the Blackberry.
If we send from our Computers to the address it arrives on both the Computer and the Blackberry.
Our carrier is vodafone ireland... and we have also spoken to our hosting company..
Can anyone help with this... it is as if Blackberry have blocked our company emails!Yes, that helps ... and this only occurs when you send email FROM your BlackBerrys to other internal (meaning on your same company or corporate email domain name) email addresses.
First, check your internal email server's spam folders for those addresses and make sure the mail is not being filtered as spam.
Then, here are a couple of guides and suggestions
KB11036Firewall and connection requirements for the BlackBerry Internet Service
KB12447Error when sending email messages in same domain: authentication error: 530 5.1.0 unknown address
KB21775How to allow enterprise activation traffic for a BlackBerry Enterprise Server to make it through a spam filter
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Email to distribution list from SAP Internal Email
I have a scenario where in I have to send email from sap internal email (T-code:-SBWP) to the distribution list.
Can some one give me some idea on the same .
When we go to T-code: - SBWP, for unread email we right click and fwd the email to distribution list, can we achieve the same functionality by a program so that we can automate the process.
Thanks in Advance.
Regards,
Pawan.Hi,
Yes ,one can write an ABAP code to send the mail to a distribution list.
Please try and use the Function Module 'SO_NEW_DOCUMENT_SEND_API1' and you need to pass the import and export parameters to this FM which needs to be defined and populated before you use this FM.
The first Exporting parameter is 'document_data' which will be of type 'sodocchgi1'.In order to populate this, you can use the structure of type 'sodocchgi1' and give the name, description, sensitivity and the language by referring to the data type mentioned above('sodocchgi1').
The next is the document type and you can mention any one of them from 'RAW' to anything again refering to the document type.
The next are the tables parameters and the first one is "object_content" which would be of type "solisti1" and you need to populate this one as well.This table would contain the contents of the mail.
The next Tables parameters is "receivers" which would be of type 'somlreci1' and in order to populate this,you need to use the below like code:
smtp_addr = any valid email id.
gi_recievers-receiver = smtp_addr.
gi_recievers-rec_type = 'U'.
gi_recievers-com_type = 'INT'.
APPEND gi_recievers.
once this is done, an email will be sent to the recipient which can be monitored in the T-code SCOT and SOST.It will take sometime for the mail to be sent as there is a fixed timeline after which the R/3 system pushes the mails through it to the recipients.
I guess, I have tried to answer your question.
In case of any queries,please let me know.
Regards,
Puneet Jhari. -
My iMac locks up constantly in email. I click on one or two emails. Then when I click on another email, I get the spinning wheel and have to relaunch. Why does it get confused and lock up? Seems like it is stuck.
10.6.8 here, MacBook Pro. Comcast. Mail freeze ups. Occasional warnings to use "Log Out" under the Apple icon.
Disk Repair run several times. Shows lots of Java "remote" issues.
I run Disk Repair several times, shows a lot of Java, "remote" issues.
Restart don't know if it helps, I do it all the time. What's with quitting Mail but it doesn't quit, and why a separate maneuver to "Log Out".
i -
i cant change my email under settings on my ipod touch it wont even let me click on it any ideas?
To get reid of the Restrictions passcoe you have to restore the iPod to factory defaults/new iPod. You should do that anyway since the apps and music (if any) on the iPod do not belong to you. They did not transfer with the purchase of the iPod hardware.
-
Exchange 2010 Internal Email Delayed for 5 Months
Today I got an email from a user saying she just received an internal email that was sent November 5th 2013. I tried using Exchange Tracking Log Explorer but nothing shows as being received on 11/5/13 and nothing from todays date that matches the Subject.
Here are is the msg header which has been modified to hide our domain. This is a small business with 12 users with SBS 2011. This isn't the first time this has happened either. Another user had email delayed for 3 months.
Received: from work-SERVER2.work.local ([fe90::504b:b597:b89b:e7d9]) by
work-SERVER2.work.local ([fe90::504b:b597:b89b:e7d9%10]) with mapi id
14.01.0438.000; Tue, 5 Nov 2013 08:38:41 -0900
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: USER NAME <[email protected]>
To: USERS <[email protected]>
Subject: FW: INVOICE FROM ABC
Thread-Topic: INVOICE FROM ABC
Thread-Index: Ac7Z2hVrwb+u2RXnRA+qtd9tX4v5DAAc7eQA
Date: Tue, 5 Nov 2013 08:38:40 -0900
Message-ID: <[email protected]>
References: <009f01ced9da$2f37ff60$8da7fe20$@com>
In-Reply-To: <009f01ced9da$2f37ff60$8da7fe20$@com>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-Exchange-Organization-SCL: -1
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-MS-Exchange-Organization-AuthSource: work-SERVER2.work.local
X-MS-Exchange-Organization-AuthAs: Internal
X-MS-Exchange-Organization-AuthMechanism: 04
X-Originating-IP: [192.168.99.99]Hi
First i really doubt that you would be able to see those transactions in message tracking logs since the default setting is 30 days.
By default the message tracking log is set to 30 days, you can change that setting though through the Shell:
http://technet.microsoft.com/en-us/library/aa997984.aspx
If this is the case then you can better increase the tracking logs retention for 3 months for the next delay can be recorded.
Also try to see if you could see some information on the protocol logs as well.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you. Regards, Sathish -
Exchange Server 2013 - Lab setup with internal emails only
Hi,
I'm new to Exchange Server 2013. I've started a POC on the product by setting up a Lab environment with one 1 AD server and 1 Exchange server (Both Windows 2012 R2). As this is a POC I just need the internal email communication. I don't want the mails to
go over the internet.
I've completed the installation part and just started to configure Send/Receive connectors and got stuck with the question whether the connectors are required or not.
Could someone please help me out in configuring internal email setup for Exchange 2013 lab setup.
Regards,
NithinHi,
You need not to configure send/receive connectors for internal email.
The following article for your reference:
http://technet.microsoft.com/en-us//library/aa996395(v=exchg.150).aspx
Default Receive connectors created during setup
Certain Receive connectors are created by default when you install the Mailbox server role.
Default Receive connectors created on a Mailbox server running the Transport service
When you install a Mailbox server running the Transport service, two Receive connectors are created. No additional Receive connectors are needed for typical operation, and in most cases the default Receive connectors don't require a configuration change.
These connectors are the following:
Default <server name> Accepts connections from Mailbox servers running the Transport service and from Edge servers.
Client Proxy <server name> Accepts connections from front-end servers. Typically, messages are sent to a front-end server over SMTP.
Each connector is assigned a TransportRole value. You can use it to determine the role the connector is running in. This can be helpful in cases where you are running multiple roles on a single server. In the case of each Receive connector previously
mentioned, their TransportRole value is HubTransport.
To view the default Receive connectors and their parameter values, you can use the
Get-ReceiveConnector cmdlet.
Default Receive connectors created on a Front End Transport server
During installation, three Receive connectors are created on the Front End transport, or Client Access server. The default Front End Receive connector is configured to accept SMTP communications from all IP address ranges. Additionally, there is a Receive
connector that can act as an outbound proxy for messages sent to the front-end server from Mailbox servers. Finally, there is a secure Receive connector configured to accept messages encrypted with Transport Layer Security (TLS). These connectors are the following:
Default FrontEnd <server name> Accepts connections from SMTP senders over port 25. This is the common messaging entry point into your organization.
Outbound Proxy Frontend <server name> Accepts messages from a Send Connector on a back-end server, with front-end proxy enabled.
Client Frontend <server name> Accepts secure connections, with Transport Layer Security (TLS) applied.
In a typical installation, no additional Receive connectors are required.
Niko Cheng
TechNet Community Support -
Internal emails are not delivered but they are shown in the Sent Mail
hi,
I'm not enjoying Exch2013, the lack of a "proper" admin console is a pain and I'm having trouble getting the required diagnostic/tracking information out of PShell to fix my problem.
I've installed Exch2013 RC1 on a new 2012r2 Domain, the install went OK and there were no obvious issues however internal email's wouldn't deliver, they appear in Sent Items but aren't received in the internal rcpt's inbox.
while trying to fix the problem, I installed ExchCU7 and bingo everything sprang to life and mail was working, inbound/outbound & internally - so I assumed the service pack/update had fixed it but the next day I rebooted the server and to my horror,
I'm back where I started - no mail flow.
One single test message which I sent outbound using the Web mail, rather than Outlook did arrive but hours after I sent it? confused.com
this is running on a HV-2012r2 as a VM, with a dedicated Nic and plenty of Fixed VD storage.
Any help/advice would be greatly appreciated.
I'm very close to removing Exch2013 and re-installing but I worry this would cause more issues.
Thanks Iainthis server is the first and only Exchange server in a single site/AD enviroment.
Doamin and Exch are both brand new, with one DC and Exch runing on a member server.
This server isn't recieving inbound mail yet, however the SMTP port is availible.
Am I correct in thinking that internal mail from one mailbox to another doesn't require SMTP, instead the msgs are transmitted within the HUB. I'd like to stress that the isntallation of ExchCU7 instantly fixed all the mail flow problems, then a day
later and after a reboot it reverted to back to its current state.
test-servicehealth shows:
Role : Mailbox Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeDelivery, MSExchangeIS,
MSExchangeMailboxAssistants, MSExchangeRepl, MSExchangeRPC, MSExchangeServiceHost,
MSExchangeSubmission, MSExchangeThrottling, MSExchangeTransportLogSearch, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Client Access Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeMailboxReplication, MSExchangeRPC,
MSExchangeServiceHost, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Unified Messaging Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeServiceHost, MSExchangeUM, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Hub Transport Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeEdgeSync, MSExchangeServiceHost,
MSExchangeTransport, MSExchangeTransportLogSearch, W3Svc, WinRM}
ServicesNotRunning : {}
I'm looking at the q's now but wanted to post this asap... i will update this thread again shortly
thanks for your help. -
How do I keep html view mode on in email, instead of clicking on it each time?
Hi linktogen,
In order to test this, can you please provide the webmail you are using for further testing?
Thank you! -
I recently upgraded my software and now when I click on a document in an email it wont automatically open - does any superstar know how to fix this? Thanks in advance!
Have you installed something called "CleanMyMac?"
-
Exchange 2010 - Getting report on local internal email
Hi,
I am trying t get one particular stat out of my Exchange 2010 server using Powershell and could use some help. I simply want the total number of emails sent internally within my single exchange server.
Below is the Powershell command I have tried.
get-messagetrackinglog -ResultSize unlimited -Start “05/14/2013 00:00:00″ -End “06/10/2013 23:59:00″ | where {$_.Sender -like “*@domain.com“} | where {$_.Recipients -like “*@domain.com“} > “C:\internalmail.txt
The internalmail.txt file is empty. I have made a couple attempts to get this information from the messagetrackinglog, but haven't gotten any results. I was able to get the total number of RECEIVED and SENT emails from and to external addresses,
but nothing internal.
Does the messagetrackinglog keep a record of internal emails within the Exchange server?
Thanks for any help you can give.
TerryYour command should work, but there's no need for a double 'where{}' and using ">file.txt" makes a not so useful file:
get-messagetrackinglog -ResultSize unlimited -Start “06/10/2013 00:00:00" -End “06/10/2013 00:59:00" | where {$_.Sender -like “*@rotterdam.nl“ -AND $_.Recipients -like “*@rotterdam.nl“} > “C:\internalmail.txt"
Also, you did not specify a server, so you will have to run this command on a transportserver and it will only return results from that perticular server.
Try the following:
get-transportserver| get-messagetrackinglog -ResultSize unlimited -Start $(get-date).addhours(-1) -End $(get-date) | where {$_.Sender -like "*@org.nl" -AND $_.Recipients -like "*@org.nl"} | select EventId,Source,Sender,@{name="Recipient";expression={[system.String]::Join(";",$_.Recipients)}},MessageSubject| export-csv -noTypeInformation "C:\internalmail.txt"
you should be able to run it from any of you servers and it should get you the logs from all transport servers over the last hour. I've used $(get-date) here to see if it is an issue with your date format (it uses locale settings, an "issue" that
has been fixed in Exch 2010).
http://technet.microsoft.com/en-us/library/aa997573(v=exchg.80).aspx
End
Optional
System.DateTime
This parameter returns message tracking log entries up to, but not including, the specified End date and time byusing the regional format of the
computer on which the cmdlet is run.
(you can expect an error on edge server query ... ignore these) -
Hi Fellows
I am facing an issue with Exchange 2010 SP3 (14.03.0123.003) environment. Internal email sent with attachment to an all employee or large-member distribution group chokes the queue on Hub Transport and takes from 7 to 15 minutes to deliver. during this
time period users's emails are also delayed because of transport queue. I am trying to diagnose the root cause for this. Your suggessions and insight might be helpful for me to get it over quickly.
2 x HT + CAS (WNLB)
2 x MBX (DAG)
UserBase: 5000+
Regards.
J.AHi,
Generally, a message that has a large attachment or many recipients takes longer for a Hub Transport server to process than a small message that's addressed to only one recipient.
In Exchange 2010, after a message is received by the Hub Transport server, the message is added to the Submission queue. Messages move from the Submission queue through the categorizer. When the message is categorized, a recipient's e-mail
address is resolved to an object in Active Directory. This query determines the mailbox associated with that e-mail address and which Mailbox server is hosting that mailbox.
For more information about Internal message Routing, please refer to the following link.
http://technet.microsoft.com/en-us/library/bb232193(v=exchg.141).aspx
In addition, Slow network bandwidth will effect email delivery. We can increase the network bandwidth to take a test. Low computer performance will also affect the delivery. If sending internal email without attachment to all employee or
large-member distribution group, will they take the same long time to deliver?
Best Regards. -
Hi All,
I've read the other threads on this but not found one exactly like it. We are running Exchange 2010 SP3 Update 1. We recently sent out an internal email to a distribution that had a couple of dynamic DL's in it and a few regular DL's.
A lot of people got the initial email and others didn't until the following day. There was around 3000 or so users in that group. When investigating it with the message tracking log, a lot of users had "400 4.4.7 Message delayed, too many concurrent
deliveries of this message at this time" for the status.
Could this be to do with message throttling? I can find very little information on this on the Internet.
Thanks in advance,
ChrisThis is not throttling.
How many HT servers do you have? What is the name of queue they all are residing?
Cheers,
Gulab Prasad
Technology Consultant
Thanks for your response Gulab,
I have two HT servers and I'm not sure what queue they were residing in as they eventually all went through. Is there any way I can tell this with the message tracking logs?
Thanks again,
Chris
Maybe you are looking for
-
How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk
-
Change XP Look and Feel Rollover Highlight Color
Is it possible to change the orange rollover highlight color that is used in the Windows XP Look and Feel? If so, how? I want to change it in once place and see the results on every component in my application.
-
ADF Faces: state saving method questions
Please, could somebody elaborate implementation of state saving in ADF Faces? What specially interests me is a way on which it is improved in comparison with RI. Will be current implementation further improved regarding size of state which is stored
-
Timeout and respond function modes
I was just wondering if i add TIMEOUT feature in my custom workflow, then on TIMEOUT, will the code in (FUNCMODE = 'RESPOND') execute along with the code i write in (FUNCMODE = 'TIMEOUT') ? This is really important for me before proceeding furthur. A
-
Help! 'itunes:image' Tag For Podcast on iWeb
Guys some how I have deleted the 'itunes:image' from teh RSS feed on my iweb Podcast site. Any ideas who I can get this back? Cheers Phil