UtSrServerBus - Driver was not correctly signed or file is corrupt

We have a Windows 2008 R2 Server running on VMware ESXi 4.0 with RDS and I don't get the USB redirection to work properly.
SRSS is 5.2.1 (latest). Sun Ray Components are 2.4 (bundled with SRSS/SRWC).
First of all, the driver of the utSrServerBus Device is not installed correctly (it seams to because of the Windows Driver Compatiblity Check). The Device hast a yellow warning "!" in the Device Manager and says (Code 52).
The driver was signed wrong or the file is corrupt. I've reinstalled it several times now. Watching the driver file (inf) properties I see that it is signed by Oracle (and by Versign).
I think this also leads to that the utSrServerPort is not installed.
As a workaround I installed the SR Components from SRSS 5.1 (version 2.0.12.0) which seem to work correctly.

This has been reported previously. And seemed to be specific to VMware installations running 64bit guest OSes.
It was found that having a virtual USB stack in the guest VM settings would trigger this problem. As thsi is not needed for the SRWC windows components to provided USB redirection, we were able to resolve this by simply removing the virtual USB device stack in the VM and reinstalling the SRWC Windows components software.
-Ryder

Similar Messages

A driver was not digitally signed after software and driver installation on Windows 7

C:\windows\system32\dipxapi.dll
error, deivice status not working properly for my H Officejet Pro 8500 a909a printer . In Device Manager I noticed a driver was not digitally signed which i beleive is causing my Internet Explorer to not work properly.
Is this a driver I need to correct or get signed? How do I correct this problem?
Need Advise
Carla

Thank you for the reply, and potential fixes. I have combed the MS site already. The workarounds may provide some return functionality, but this type issue between two companies as HP and MS seems peculiar, and I am holding out for a permanent bonafide solution.
For example, the "F8 override disabling all digital signatures" plus installing yet another program to continue with every reboot is just not a viable solution to me.

I recently lost access to external hard drive connected to my iMac (no icon visible). My iTunes and iPhoto files are accessed from this drive. I can't seem to get the time machine to restore these two. that drive was NOT excluded from time machine backup

Hi.
help! recently I noticed the external drive icon missing from my desktop...the one with my huge itunes and iphoto libraries. I tried several things but couln't get it back. So I tried to restore to an older date in time machine with no success. I'm sure the drive was not set for exclusion from the backups. Any thoughts as to where i'm going wrong? I was under the impression that external drives were also backed up with time machine...am I delusional?

Frequently doing a SMC reset will help this issue, for directions please click the iMac SMC and PRAM reset link. Also check the obvious such as cables and connections. Or it's even possible the EHD has failed, they can and do.

TS3212 I continue to try to install iTunes; when I attempt to open the newly installed iTunes, I receive errors that it was not correctly installed. I have followed the direction on this website, but I face the same error. Please help.

I continue to try to install iTunes; when I attempt to open the newly installed iTunes, I receive errors that it was not correctly installed. I have followed the direction on this website, but I face the same error. Please help.

latest message indicates I need Apple Application Update
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Printer driver was not installed. operation could not be completed

Adobe Acrobat 9.3.1
windows XP system.
Cannot add the Adobe PDF printer get the error message:
Printer driver was not installed. operation could not be completed
Software installs/repair try to install the Adobe PDF printer but they do not. No error message; just that the Adobe PDF printer does not show up
I tried adding the Adobe PDF printer manually.
The drivers start to load and then fails giving the error message in the subject line.
I cleared the print spoolers and rebooted.
I have uninstalled Adobe Acrobat /rebooted/reinstalled. Install says it adds the Adobe PDF printer but nothing happens.
Problem exists for all users including Administrators.
I have renamed the C:\WINDOWS\system32\spool\drivers\w32x86 and C:\WINDOWS\system32\spool\drivers\Printers folder.
Both are recreated when I try to reinstall the Adobe PDF Printer.
I can add network printers with no errors.
I have cleared Adobe PDF printer from registry. e.g.:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3\Adobe PDF Converter
I even imported Adobe PDF registry entry from a working system taking care to adjust the system values accordingly.
I also verified permissions for registry keys and application/driver folders were set correctly.
I have completely reloaded the installation software and imported the Adobe PDF drivers from a working system.
Not sure if this an Adobe issue, but that appears to be the only printer I cannot re-add.
Any constructive ideas on what to try next would be appreciated.

When I upgraded to Reader 9.4 I lost all ability to print Adobe pdf's. Finally uninstalled 9.4, re-installed 8.2, changed the filename "high quality.joboptions" to "Adobe PDF converter.joboptions" and was back in business. Pretty screwey fix, but after getting no help from online chats with Adobe and a day's lost work I was happy to have it.
[email protected]

Hello. I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support

I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support, re-activated my MIFI. 1. Decided to return the device. Spent hours with Customer Service, then finally up to Management, they agreed to take it back and void the contact, I sent it back immediately – and instead of voiding the contact they transferred it to my MIFI! Please cancel the contract on the MIFI. 2. During the short time I had the Jetpack I continually received overage alerts, took it all the way up to 30 GB, each time I backdated the new data plan except twice when customer service did and failed to back date the increase, and once the computer locked customer service out and could not increase. The end result is I have a $495 bill, many of these alerts were false since I ended up with only 14 MG for the month, etc. I am asking that my bill be reduced significantly to reflect no overage and to compensate for these problems. Please open up a ticket for this.

I had Verizon JetPak and you will find it will eat data like crazy. I opted to sign on to ATT Uverse and configured my phones and other devices to the WiFi on the Uverse system. It took about 5 minutes to completed the configuration. I was using 10 to 12 GB monthly to support 5 devices. Even if you use Verizon DSL, you are still subjected to same GB allotment. In my area, Verizon DSL is not available. With Uverse, I have 250 GB monthly to use, and I have not even come close to using anything of that magnitude. I reduced my GB package with Verizon to 2 GB per month and since having ATT Uverse, I never use more than 1GB a month with Verizon.
I have no problem with Verizon cell phone service as we get a much stronger signal where we live than you can with ATT or any others. It is just my opinion, but if you are running multiple devices off Verizon Jetpak, you will eventually spend a fortune to keep pace. I pay $60 a month for 18 Mbps speed, although ATT have packages that cost much less. But, it saves me a bundle each month. The cost of Uverse alone is worth not having to run everything through a Jetpak.
If you have the option to use another DSL service provider in your area, I recommend dumping the Jetpak and sign on with another carrier.

I have a problem with a few emails i wrote which were in the outbox. The outbox disappeared all of a sudden with my mails... However they were not sent since the email address was not correct (just 3 initials). Is there a way to get it back somewhere?

Hello,
I have a problem with a few emails i wrote which were in the outbox. The outbox disappeared all of a sudden with my mails... However they were not sent since the email address was not correct (just 3 initials). I was waiting to find out the correct email address of that person, put in in and then sen it...Is there a way to get it back somewhere on the ipad or in some cached folder?
Many thanks for an answe to this.
Swisslady2

There is no cache where the emails would be stored on the iPad, but you could try quitting the mail app and then launch it again and see if the emails return.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Tap the home button. Then try mail again.

I receive the message: "The extension could not be loaded because it was not properly signed."

When I try to open the Library in Photoshop, I receive the message: "The extension could not be loaded because it was not properly signed." It worked last week, but now I get this message and the Library is completely empty in Illustrator. My Library has stuff in it and I can see it on my iPad Apps.

I am working on a PC, using Photoshop CC 2014
Operating System:
Error Message:
Settings in Photoshop > Preference > Performance:
Type of file you were working on: No file; just opened up Photoshop to begin working
This is the first time this has happened - I have not doe any other troubleshooting.
Camera Raw does not apply here.
Thanks.

Tecra sound card driver will not install "driver was not installed" message

Hello
I have a Tecra 9100,running XP pro with s/p 2 and when I try to install the Yamaha AC-XG sound driver it will unzip the files then looks like he's loading the files thru InstallShied, but then a error message comes up "driver was not installed" I have tried several different ways but no success,any help would be greatly appreciated.

Hi,
You are using now 6.10.6159.0 D (SP43935.exe) version? Right?
So uninstall Your audio drivers and try to install previous version 6.10.6087.60 C from here.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Extension could not be loaded because it was not properly signed

Followed the steps on the tutorial to get an extension created in eclipse. I can export it and run it just fine, but it won't load when running from eclipse. I get the error: "extension could not be loaded because it was not properly signed." I can't seem to find where to configure this. Any help is appreciated.

Thanks for the help. Yes that addressed the issue.
On a side note, the tutorial I followed was the one that came with the plugin. Specifically I'm referring to the following file:
//<eclipse_path>/plugins/com.adobe.cside.html.docs_1.0.0.201307260955/doc/getting_started/ Create_Your_Own_HTML5_Extension_In_5_Minutes.htm
This is the HTML page for the "Create Your Own HTML5 Extension In 5 Minutes" walkthrough. It makes no mention of changing "PlayerDebugMode". I downloaded the eclipse plugin from the following link:
http://labs.adobe.com/downloads/extensionbuilder3.html
Is there a more up to date plugin? Where is the documentation that references changing the settings you mentionned?

Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, Anurag

HI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Sharepoint server issue:: Register Managed Account -Password supplied with username was not correct

when i am creating a managed account from share point server admin it is showing:-
The password supplied with the username fimservice was not correct. Verify that it was entered correctly and try again.
i have put correct password but even though it is showing this error.
i have even tried to enter username with my domain name like indialab1\fimservice but this account is not being
recongnized.
Thanks for your help

Additionally you can follow / refer steps mentioned in
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Let us know your results
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

A function driver was not specified

I cannot see my iPod in My Computer or iTunes. I get the message "The installation failed because a function driver was not specified for this device instance." when I re-boot after the iPod CD installation.
Windows 2000

This maybe of help.
USB drivers are not installed properly.

I have v10.8.2 os on my mac. i use an external drive for backup which is on whenever the mac is on. whenever the mac wakes up i get the reminder that the drive was not properly ejected. i did not have this issue with snow leopard?

since i have upgraded to mountain lion i get a popup whenever my system wakes up telling me that my external drive was not ejected properly. i did not have this issue with snowleopard. i leave my hard drive on and connected for use with time machine.

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.

Hi
After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.
Thanks
PT

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

UtSrServerBus - Driver was not correctly signed or file is corrupt

Similar Messages

Maybe you are looking for