V_V2 for reassigning new unconfirmed quantities

Hi,
Executing transaction V_V2 for reassigning new unconfirmed quantities to other sales order and it does not work.
Where can be the problem?
Thanks in advance
L

Hi,
Check whether the sales order is in credit block.
You can also refer OSS Note 549064 - FAQ: Rescheduling and backorder updating in R/3 and Note 105840 - Updating backorders and rush orders
Regards

Similar Messages

I'm trying to upgrade my iCloud storage for the new price.

I'm trying to upgrade my iCloud storage for the new price, but it doesn't gives me the option of 20G for $0.99 a month.
How can I get 20g for $0.99 a month?
Thanks!

Katherine,
have you read the message in the panel? Something is wrong with your credit card. Perhaps you have to enter a new date of expiration.
In the small print it says, there is still a purchase, that needs paying,"Ugly Heart" with an amount of R 9.99. And "We were unable to authorise your credit card for this purchase". You will first have to update your Billing Information before you can proceed to make a new purchase for upgraded storage. Click "Account Details" in the iCloud panel.
-- Léonie
If you cannot fix the account from the iCloud panel, open iTunes and sign into the "Store" menu, Then use the "Store > View account" item there to check for problems with your Billing Information.

If I wanted to exchange my iPhone 5 for the new iPhone 6 (no additional cost after $199 gift card from selling iPhone 5) do I have to pre-order online or do I just have to show up at a Verizon store Sept 19th?

If I wanted to exchange my iPhone 5 for the new iPhone 6 (no additional cost after $199 gift card from selling iPhone 5) can I pre-order online now or do I just have to show up at a Verizon store Sept 19th?

scodaddy, that is a wonderful question. We are super excited about the new iPhone. You can always pre-order your new iPhone online and then start the mail in rebate by following this link: http://bit.ly/GGnDDC Or you can always go into the store location and do it all in store on the 19th when the phone is launched. That would depend on if the store has them in stock when you go in. I hope that this was able to address your concern.
KevinR_VZW
Follow us on Twitter @VZWSupport

Error while generating DDL commands using startSQLRepository for a new Repository

Hi,
I am trying to generate DDL Commands using startSQLRepository for my new repository SubashRepository so that I can use them to create new table structure.
All the repository related changes looks good. i can see my repository in ACC
When I run the command:
startSQLRepository -m SupremeATG –repository /com/supreme/SubashRepository /com/supreme/subashRepository.xml -outputSQLFile C:/ATG/ATG9.3/SupremeATG/config/com/supreme/subashRepositoryDDL.txt
I get following error:
Table 'SUBASH_MEMBER' in item-descriptor: 'member' does not exist in a table space accessible by the data source. DatabaseMetaData.getColumns returns no columns
Note:
* errors related to definition file were cleared as the same command threw relevant exception while trying to store a array property with out creating a multi table.
* Now this is the only exception i see
* Some DDL are getting generated in the output file, but those are related to inventory repository (I am not sure why this is happening as I have specifically gave the path to my definition file).
Any help in resolving this is highly appreciated.

Pl post in the ATG forum

Error while generating CW kin for the new BG created for Taiwan

HiAll,
Please provide your help to resolve this issue,
Iam getting error while generating CW kin for the new BG created for Taiwan, China.
Error : Value TW is not a Valid context for the Descriptive Flexfield Person Developer DF.
Please let me know, is there any step missed to create CW kins for new BG's.
Thanks-
Sowmya.
Edited by: user13419037 on Jul 2, 2012 3:41 AM

Hello ,
Your solution can be solved by enabling the displayed check Box in Location Address DFF
Thanks
Bindu

I tried to sign up for a new free account, got message from you. Sent you em address ask what is wrong. Find my em was right. condused. Tried change my profile, but never had a profile, and at that it says to change my password, not want to change it.

Wow, at age 76 I'm suppose to remember all I saw before and give you more details?
I wanted to be able to join the support blog, to be able to ask a question. It all went from there. Somewhere along the line I saw sign up for a new free (support?) account. I did. created a cute name (Marycontrary), put in a password, not likely one to be used by someone else, my em address. Sent. Got a confirmation em from you. I clidked to confirm. I got back from you: It said something wrong (or something like that) I thought maybe I didn't type in the last part of my em address and sent a reply to you to that effect. See above for rest. Hope you can help. I can't stand it when companies want us to change our passwords. I like us to be able to keep our original password, I use different ones for different sites. The best sites give us a chance to retrieve our orignial password by setting up a chance to choosing a question of our choice and registering the answer, then when a problem they as the question and we give the answer and everything goes well. These change you password bits are very very hard on us older people, and there are more and more of us out here on the net now days. Thank you for any help you can give me.'''bold text'''

You are describing the way Skype accounts are set up since the beginning of Skype: No email verification is necessary. That's why we recommend new users to create their Skype accouns using Microsoft account instead which has all these security features.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Can I return my macbook for a new one?

The rumors are that the new Lion comes out this week, i just bought a macbook pro last week and its has the current OS can i got to the store and return my macbook for the new one with the new system?

Lion Up-To-Date upgrade
"The Mac OS X Lion Up-To-Date upgrade is available at no additional charge via the Mac App Store to all customers who purchased a qualifying new Mac system from Apple or an Apple Authorized Reseller on or after June 6, 2011. Users must request their Up-To-Date upgrade within 30 days of purchase of their Mac computer. Customers who purchase a qualifying Mac between June 6, 2011 and the date when Lion is available in the Mac App Store will have 30 days from Lion’s official release date to make a request." See below:
OS X Lion - Get up to date

Can I return my iPad2 for the new iPad

My parents bought me the new ipad2 in January and they also pay for the one year guarantee. The iPad 2 is brand new in good condition. Now, can I return my ipad2 for the new iPad without paying?

No, unless the store you bought it from has a very generous return policy - the Apple Store official policy is 14 days. The one year warranty is on defects in the product, not for upgrading. You can sell your iPad and use the funds to buy a new one, but you will likely sell for less than you paid.

A1281 is the battery i got for my 15inch MBP. Is the battery life only 2 - 3 hours for a new battery on this device.

A1281 is the battery i got for my 15inch MBP. Is the battery life only 2 - 3 hours for a new battery on this device.
This is from Apple.
2 to 3 hours seems very low.
what is teh standard or advertised spec for a 15 inch Macbook Pro with this battery.
I would like to know so that i can return it if this is not normal.
Its expensive so comments would be appreciated.

I say it depends on your model? average usage is about 3-4 hours depending on what you use and how you use it. Adobe Flash player eats a lot of battery power so if you are on a web page and has flash player, likely that it's eating up battery because of it's power thirsty.
Also check your systems activity monitor. It could be possible that one of your program/apps did not close right and may be still running. So check for that and end the process if necessary.
If you have a backlight keyboard, in a broad daylight, it's not necessary to have it on.
I also suggest that you use it plugged in most of the time, and it's not going to hurt or damage the battery if you have it plugged in all the time. Only use on battery if you are going to places that has no access to the outlet. If you are at home, then keep it plugged in. Just keep in mind to fully drain the battery until it your MBP turns off on it's own. This is the calibration process so that you have the most accurate battery readings.
The standard for 2011 MBP is 7 hours on battery. Before that model is 10 hours, but i don't believe that previous models will last 10 hours. Last week I calibrated my battery readings from fully charged and it took 9 hours to completely drain out the battery (I have a 2011 model),
If you think it's not normal and that your battery doesn't meet your expectation then set up an appointment with the genius bar and have them test the battery. They will determine whether it is faulty or not.

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

When I upgraded to ios 5, it asked me a for a new game center name. How do I use my old game center name, since it makes me start some games over without it?

When I upgraded to ios 5, it asked me a for a new game center name. How do I use my old game center name, since it makes me start some games over without it?

Carefully follow steps 1-9 outlined by wjosten in this post: https://discussions.apple.com/message/13356770#13356770. This will not, however, avoid wiping any non-purchased media from your phone (ripped CDs, etc.) as this is only synced one way: from your computer to your phone. You will have to either rebuild your iTunes library with this content and sync again to restore it to your phone, or purchase 3rd party software to copy it from your phone to iTunes prior to syncing (such as Touch Copy).

When I click for a new tab, the homepage is Search Yahoo...I never changed it to that. And I don't know how to get it back to Google. Help? Please!

But when i open up Firefox, it does bring me to the firefox start up page, but if I click for a new tab it brings me to Search Yahoo

Firefox's behavior is to open a blank page when you open a new tab. Your issue is most likely caused by one of the add-ons you have. Please see here: [[Troubleshooting extensions and themes]]

How To Register For a New eFax Account on the Photosmart eStation

If you ever find yourself unable to log in to your eFax account and you have contacted HP Technical Support and eFax only to find the problem cannot be fixed by either party, there is a way to register for a different account but the only way to do this involves using a Photosmart eStation. The error you may get will read "Invalid Login" and is only applicable on the Photosmart eStation, HP Envy Series, and the Photosmart 7510 regardless of whether you are trying to create a new account or just access one that already exists, here are the steps to fix that:
1. Go to www.efax.com and sign in.
2. Select "Update Account" and then select the profile tab.
3. Change the current contact email to a dummy/alternate email (must have a phone number listed on this page before changes will go into effect).
a) Using the @hpeprint.com email may cause problems.
b) Log out of eFax account.
4. Go to the E-station and follow these instructions to be able to register for a new account:
a) On the top of the E-station, select the 3rd Menu button (3 lines) and go to
b) Select Settings then
c) Tools then
d) Advanced then
e) Applications and
f) Manage Applications
g) next Filter > select All and wait for all the apps to load.
h) Scroll down to very bottom for Webfax
i) and then Clear Data in this section
j) Select the Home button at the top and
k) Select Efax and register for a new account with a preferred email and zip code
l) Write down the new phone number and check your email for a new 4-digit PIN
5. Repeat these steps to clear the Web Fax data and then try to login to efax.com on the printer by selecting
a) eFax button
b) Settings
c) Account and upgrade information
d) Change
e) After selecting chance, in this area, login to eFax on the printer with the new number and pin.
6. The best test to ensure everything is working now is to send yourself an eFax so you can check for incoming and outgoing processes to be just as you expect it to be.
7. Print the ePrint info page so that the printer's ePrint email address will be associated with the new eFax account.
And that is the trick on how to get a new eFax account if you are experiencing issues with signing in from the front panel of the printer. If you do not have access to a Photosmart eStation, then contact HP Cloud Services at 1-855-785-2777 if you live in North America or are an English-speaking customer for assistance with this step.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Here is a picture of the Photosmart eStation:
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

HT204053 I have a small older iPod with one email address and passcode, & I have created an "Apple ID" yesterday with a different email address & different password, for my new iPOD Touch5: Does that ID & pw now apply to my iTunes?

Does creating a new Apple ID with user name, email and password ( for my new iPod Touch 5 CHANGE and my existing iTunes account username and pw ?
Thanks....Gary
[email protected]

Your new iPod Touch will use what ever ID you specify in Settings>iTunes & App Stores when you purchase apps and media from the iTunes and App stores, regardless of the ID you may have been using before on your older device.

HT1175 I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

V_V2 for reassigning new unconfirmed quantities

Similar Messages

Maybe you are looking for