Validate partner number
hi all,
i have a selection screen with partner role and partner number fields.
now my query is how to validate the partner number against partner role entered.
For example, 832000 is Holding Customer. However, system is accepting it with the Partner Function 1B which is for Reporting Customer.
Can anyone tell how to validate this condition or is there any fm to validate the same.
regards
vijay
Hi
Write a select statement and in the where condition put the partner number from ur internal table.
if sy-subrc neq 0.
"error message"
endif.
Regards,
Vishwa.
Edited by: vishwa sri hari on Oct 6, 2008 9:48 AM
Similar Messages
-
hi,
i have a selection screen with partner function and partner number.
not i need to validate the partner no against the entered partner function and partner number need not be a customer only so i cannot validate it from table kna1.
Can anyone tell me how to validate the partner no in such case or is there any FM to validate the same.
any pointers will be highly appreciated.
Regards
vijay.Hi,
Join both KNA1 and KNVP based on KUNNR and validate the Customer Master Partner Functions.
Regrads,
Siva -
How to look for business partner number in GTS
Hi Experts,
How to look for the business partner number in GTS when we have the Customer Id number in r/3?
Please let me know the path in GTS.
Edited by: Anurag87 on Dec 9, 2010 2:17 PMHello,
just simple in GTS in transaction BP find by "3 External number" (which is yours R/3 number).
Or in se16 table /SAPSLL/PNTBP type in field BPVSY you external number from R/3 system.
Cheers,
Gabriel. -
The special stock partner number is different in VA02 and VA03
**Hi friends,*
*its little bit critical*
*my client raised Sales order and it was processed for delivery and billing also. now when we open sale order XYZ in VA02 i.e, change mode There is special partner number is 189011 it is correct.*
*and when we open same sale order XYZ in display mode (VA03) here The special partner number is changed and system showing ship to party number as a Special partner that is b1b1 actually it is ship to party number but system showing same number for both sp and sb as b1b1 thats is in VA03.*
*can anybody please help out meHi,
Please check whether you have any screen variants / transaction variants assigned to the Tcode VA03. The following thread will give you info about transaction variants in VA03.
VA03 and SHD0 made me crazy
Regards,
P Gomatheeswaran -
IDOC bapi_po_crate1 "Please enter a partner number" Error
Hi experts
after an upgrade from 4.7 to Ecc 6.0 during IDOC elaboration an error occours
Please enter a partner number
ME 350
I saw into Customizing but also appear correctly filled in.
Is there anyone who find, after an upgrade, the same issue?
regards
andreaHi Andrea,
please check note 1245230 to solve your problem.
Regards,
Edit -
Bapi_po_create1 - partner function and partner number problem
hello.
let me just first state that on ecc5 this problem doesn't exist.
we are in the middle of an ECC6 upgrade right now and i have a problem creating a PO through the BAPI on the ECC6 upgrade system, needless to say that all customization was copied from ECC5.
when trying to create the order i get an error MSG ME 350, "please enter partner number" .
i didn't get the error in ECC5. customization hasn't changed in ECC6. I've checked Ecc6 customization on MM->purchasing->partner determination. entering a partner function isn't mandatory and we've never entered a partner function before in the PO header besides the vendor number.
please help.
thanks,
Oren.
Edited by: Oren Wolk on May 2, 2010 11:17 AMhello.
the note suggested doesn't help my case.
can someone please suggest a different solution?
maybe in ECC6 the partner function is set by default to some value? and therefore expects a partner function?
thanks,
Oren. -
Business Partner Number - HRALX-HRAC problem
Hello,
I am trying to configure Service desk in Solution Manager 7.0
While creating Business partner through t-code ppoma_crm.
But after creating Business partner, there is no assignment of Business partner number to business partner.
I have check entry HRALX-HRAC in table T77S0, in transaction sm30,
For HRALX-HRAC flag is not set.
What should I do to set this Flag?
Should I set manually or there is any procedure for it???
Kindly guide regarding this.
Thanks,
Chandresh Pranami.Dear Chandresh,
have you activated the BC sets for service desk?
You can the following
Go to the following IMG path: Customer Relationship Management -> Master Data -> Business Partner -> Integration Business Partner-Organization Management -> Set Up Integration with Organizational Management.
Find the entries starting with HRALX. You should have those entries:
HRLAX - HRAC with the value u2018X',
create this entry in the table and Save.
HRLAX-OBPON with the value u2018ON',
create this entry in the table and Save.
Regards
Prakhar -
Business partner number Issue in Service Groups
Hi ,
In My Current Business process we are creating Manual Organizational Unit Service Groups, at the time of creation system should generate Business partner number with ROLE Organization.
Recently we are updated system windows to UNIX . from that release system not generating business partner number automatically in Organizational unit .
I have run the program HRALXSYNC to Synchronize organizational unit in background, then system generated business partner number but this number not visible under organizational unit beside objective id . Available under transaction BP .
And we are failed to find service group name under service groups result list..
Regards
RajuCan any One help on this
Regards
Raju -
Change history of User for Business Partner Number attaching and removing
Hi Experts
Is there any t-code in SRM which will show change history of User for Business Partner Number attaching and removing.
Thanks--
Guru Prasad DwivediSerene,
I am not too sure if anyone can DELETE a Payment Term linked to a BP. The system would not allow this. If at all a Payment term was deleted, I don't think it can be traced.
It is therefore very important to use Proper user authorization so that only people authorized to do certain things are doing it and not everyone.
Suda -
Partner profile and partner number in output of order/invoice.
Hello Experts,
I want to know how system pick partner profile from output type triggered in sales order/invoice??
I could see partner profile is different from partner number exist in output triggered in sales order/invoice.
I want to know the triggering point of idoc from SO/invoice.
ThanksThe phrase "ouptut goes to partner" indicates that the partner will be recipient of the output type. E.g., ship-to partner will be the recipient of the delivery and the delivery note.
The use of an output partner in the output condition record is used to control the output device used in the output determination - a completely separate issue.
Unless you are (e.g.) using different printers for outputs which will be sent to different partners, you would likely be better off using a more generic access for your output condition records.
HTH
James -
How to include partner number dynamically in the archive filename ?
Hi,
I am working on IDOC archiving. Since we have a lots of IDOCs with the same Master IDOC name but coming from different partners, it would make sense to generate as much archive files as there are different partners.
I have seen that the archive filename is dynamically built with concatenation of parameters.
I guess we could use the filename_exit function module to set a parameter to the value of the partner number, but how to get the partner number ?Welcome to SDN.
check out this weblog.
<a href="/people/sap.user72/blog/2005/06/02/dynamic-includes-for-bsp">Dynamic Includes for BSP</a>
Regards
Raja -
User exit -BADI for overriding Partner number in Purchase order output type
Hello All,
We have a requirement wherein the EDI message type will distribute the Idoc to the partner number determined in the output type of the purchase order. We are maintaining the condition record for a generic partner number in MN04 and we want this partner number with partner role SH from the condition record to be modified to the sales order sold to party partner number. We are using third party processing and hence sales order number can be fetched from account assignment (EKKN) table of the purchase order. Kindly do let me know the user exit /BADI that can be used for achieving this functionality.
Thanks in advance for your immediate response.
With regards,
Joseph Anand BHi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu -
How to validate the number of characters in Text Entry box?
Hi
I have inserted a text entry box and assigned a variable (UserName) to it. Now, I need to limit the entry to a maxinum number of 20 characters. In other words, how do I validate the number of characters in the text entry box and provide feedback if it is more than 20 characters?Thanks.
I have posted this as a query on the relevant post on Jim's website. I am too new to regular expressions. I hope he will help with an example as well.
http://captivatedev.com/2012/07/31/adobe-captivate-6-x-widget-text-entry-box-validator/
Sreekanth -
Statusrecord 37:Sender partner number in control record is default
Hi all
I am sending MATMAS data from one R/3 to another R/3 in ALE.
when i am testing it from we19..... I'm the data is not sent insted it is being saved in database.
In WE05 I can see the following error.... and the lights are green.
statusrecord 37:Sender partner number in control record is default
Please help me
Thankyou
SIMONHi Joergen,
we also have similar problem to send out ordrsp. Could you tell me how to solve this problem as I saw tht this problem of yours has been answered.
Thanks inadvance for your reply,
Lily -
EA608 EDI: Sender partner number in control record is default
We have created some KU partners in WE20 for sending billing documents to the SD bill-to partner but is running into an output error EA608 (EDI: Sender partner number in control record is default) on the billing document when trying to create IDOC's.
Settings on partner:
Partner: 12345
Partner type: KU
Partner function: BP
Message type: INVOIC
Application: V3 : Billing
Output type: ZEDI : US EDI Invoice
Process code: SD09 : INVOIC: Invoic
EDI Standard X
Message type 810
Version 004010
Any idea to what the problem is?
BR
JoergenHi Joergen,
we also have similar problem to send out ordrsp. Could you tell me how to solve this problem as I saw tht this problem of yours has been answered.
Thanks inadvance for your reply,
Lily
Maybe you are looking for
-
Change file name with oreilly servlet
I am using oreilly servlet package and I want to change the file name to the file I am uploading, is this possible ? How ? Thanks. here I post the servlet code: package com.reducativa.sitio.servlets; * DemoParserUploadServlet.java * Example servlet t
-
Any further news on 3rd-parties being able to extend LR with image-processing plugins yet? When the SDK was first announced, it was described by Adobe as a 'preview' SDK and that a full SDK, allowing image-processing and other plugins, would be fo
-
HTTP 403 Forbidden in SM59 for a RFC type H
Hi Experts, I have created a RFC destination on SM59 in PI type H pointing to my ECC box. This is for inbound abap proxies scenarios. When I run a connection test in SM59 I got 403 - Forbidden. These are the config parameters in my RFC dest.: TAB Tec
-
How to buy discounted upgrade from CS5.5 to CS6
I own CS5.5, and subscribe to CC as well. I'd like to upgrade my perpetual license to CS6 in case there are years when I don't want the CC subscription. I see in the FAQ that discounted upgrade is available, but I cannot find a link to upgrade pricin
-
Latest itunes won't install correctly.
Hi there, I've downloaded the latest itunes a couple of times now and it still won't install correctly and I can't open the itunes file. I have fully deleted and uninstalled itunes to try from scratch but that still doesn't work. Any ideas? Also w