Variable substitution from flatfiles

Hello all,
I have a scenario where I just route a flatfile through XI. No mapping nothing. In the target directory I want to use the first three digits of the flatfile as a variable. Unfortunately the file is a *.txt and not an xml. Is tehre another way to extract the information from the file?
Thanks in advance!
Regards
Cornelius

hiHi,
If you are using your XI as a file transfer service that picks up a flat file and then dumps it into another location without mapping etc, then you can use the adapter specific parameters and pass the source file name and useit as your target filename.
but, you will not get only the first 3 characters in this case. You will get the entire filename,
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Also, take a loot at michals FAQ , Adapters .. Question 5.
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Regards,
Bhavesh

Similar Messages

Used variable substitution to substiture the field 'date' in file name

Hi gurus
I have used variable substitution to substiture the field 'date' (dd/MM/yyyy/hh/mm/ss) in the file name so when empty payload (a valid xml ) is generated by Message mapping then the communication channel is failing by showing the following error
File processing failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during
variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload
: date
As of now the business is not getting effected as the business scenarion needs only customer master data at the reciever side But when ever there is no custmer master data in the sourse side the message mapping is generating an empty payload and the communication channel is failing ( so it is an internal issue and is there any way which could solve the both (ie the business must not get effected and as well the communication channel must not fail)
any coments on this will be higly apreciated
thanks and regards
sandeep

Hi Sandeep -
Yes If you use the Variable substitution from the payload , that perticular field has to be generated in the target structure.
To handle this You can do the following:
Sourcefield --->exists -> IfThenElse-->TargetField
Where     SourceField>exists(node function)-> If
               SourceField -
>Then
               CurrentDate(Date Function)----->Else
Hope this will help !!
Regards.
Jeet.

Problem related to variable substitution

Dear all ,
I have a query related to variable substitution :
The requirement is that filename should be in the following format : %<store_code>%_%<Date>%_master.xml .
I have done the configuration for Store_code in the variable substitution from Payload .
But I am facing problem related to Date as the requirement is that we should not take the date from the payload . We used "ADDtimestamp" in the file mode creation but it is generating file with time stamp also which doesn;t serve the purpose .
Can somebody suggest how to take the current date without taking it from payload . Does anyone know something about standard current date which I can assign directly to Var2 .
Thanks in advance
Regards
Prabhat

Hi,
In your mapping, have a user defined function which has a bit of Java to get the current date and time and pass back out to a variable.
Here is a code snippet I got in Google to do this :
import java.text.*;
import java.util.*;
public class Dtest {
public static void main(String args[]) {
 SimpleDateFormat df = (SimpleDateFormat)
 DateFormat.getDateInstance(DateFormat.SHORT);
 System.out.println("The short date format is " + df.toPattern());
 Locale loc = Locale.ITALY;
 df = (SimpleDateFormat)
 DateFormat.getDateInstance(DateFormat.SHORT, loc);
 System.out.println("The short date format is " + df.toPattern());
Cheers
Colin.

How to acces the filename from Message Header during variable substitution

Hi,
We need to access the attribute filename from Message Header during Variable Substitution.We are able to access the following attributes of Message Header
sender_party, sender_service, receiver_party, receiver_service, interface_name, interface_namespace,
message_id (message ID with hyphens, for example 9fbe1ff1-9a0d-11d9-8665-cbf10a126331)
message_id_hex (message ID in hexadecimal format, for example 9fbe1ff19a0d11d98665cbf10a126331)
For example, if we want to specify the interface name from the message header in the target directory or in the file name scheme, we enter message:interface_name as the reference.
In the same way i need to access the filename which we get in the Message Header(which we get in the Message Header when we check the Adaptor specific message properties and filename in sender CC).Any suggestions on the same
Thanks and Regards,
Bhargav
Message was edited by:
        bhargav gundabolu
Message was edited by:
        bhargav gundabolu

Hi Bhargav,
Use this UDF to retreive the file name from the Dynamic Configuration Payload in the mapping.
getFileName(UDF) -
> Filename(node in the target structure).
public String getFileName(Container container)
   //write your code here
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Create a node in the target structure top hold the filename returned by the UDF.
Now your payload will have the filename along with the actual data.
U can use the variable substution now as u use for the other data in the payload since the filename is now a part of your payload.
Regards
San

Variable substitution: (delete leading zeros from file name)

Hi All,
I am configuring an IDOC to FILE (fcc scenario) with a requirement of using the IDOC number in the output file name.
Using variable substitution, I manged to get the IDOC number from incoming Idoc-control record but it comes in its entitre length with a few leading zeroes like '00000001234'.
So my output file name looks like 'Output_000000001234.txt' . I want it to be like 'Output_1234.txt'.
Is it possible to achieve it ?
Thanks
Shirin

Hi Shirin,
First supress the leading zeros of IDOC number by using the following code:
Create a user defined funciton zerosuppress and take the cache as value and take one argument input. Then put the code below:
//write your code here
String output = input.replaceFirst("^0+","");
return output;
Then use variable substitution for generating ur IDOC number in the out put file name.
Regards,
Vinod.

Variable substitution error while using Seeburger module parameter

Hi Freinds,
I would like to use the variable substitution in a receiver file adapter to add the invoice no.
(which is contained in the XML file) to the target filename.
In addition I have to convert the XML file to an X12 EDI format using the seeburger module "localejbs/CallBicXIRaBean".
As soon as this entry is made in the modules the following error message occurs:
"com.sap.aii.adapter.file.configuration.DynamicConfigurationException:
Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException:
Caught SAXException while parsing XML payload: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:
XMLParser: No data allowed here: (hex) 53, 4f, 48(:main:, row:1, col:3)"
My problem is that the conversion from XML to X12 EDI is done before the variable substitution is started.
That`s why the reference for the variable is no longer valid as the file is already converted to a X12 EDI (=flatfile) format.
If I disable one of the two steps (either 1:1-mapping or variable substitution) the other step runs properly.
Has anybody an idea how to solve this topic?
Is it possible to specify the variable substitution as module?
If this is possible I could solve it by just reordering the two steps in the module chain.
Regards
Venkatesh

Use Dynamic Configuration Bean to set this value. You have to use this well before "localejbs/CallBicXIRaBean".
Check SAP note : 974481 for more information.
Blog: [/people/jin.shin/blog/2007/04/27/sap-netweaver-xi-variable-substitution-with-adapter-specific-message-attributes-via-dynamicconfigurationbean|/people/jin.shin/blog/2007/04/27/sap-netweaver-xi-variable-substitution-with-adapter-specific-message-attributes-via-dynamicconfigurationbean]
Second Approach if the above approach doesnt work.
Use Dynamic Configuration concept in UDF to set the filename under message Mapping.
Thanks,
- Gujjeti.
Edited by: Praveen Gujjeti on Feb 25, 2009 11:25 AM

Variable substitution & Seeburger conversion module

Hi everybody!
I would like to use the variable substitution in a receiver file adapter to add the order no. (which is contained in the XML file) to the filename.
In addition I have to convert the XML file to an edifact format using the seeburger module "localejbs/CallBicXIRaBean".
As soon as this entry is made in the modules the following error message occurs:
"com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Caught SAXException while parsing XML payload: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 53, 4f, 48(:main:, row:1, col:3)"
My problem is that the conversion from XML to edifact is done before the variable substitution is started. That`s why the reference for the variable is no longer valid as the file is already converted to a edifact (=flatfile) format.
If I disable one of the two steps (either 1:1-mapping or variable substitution) the other step runs properly.
Has anybody an idea how to solve this topic? Is it possible to specify the variable substitution as module? If this is possible I could solve it by just reordering the two steps in the module chain.
Kind regards
Chris

Use Dynamic Configuration Bean to set this value. You have to use this well before "localejbs/CallBicXIRaBean".
Check SAP note : 974481 for more information.
Blog: [/people/jin.shin/blog/2007/04/27/sap-netweaver-xi-variable-substitution-with-adapter-specific-message-attributes-via-dynamicconfigurationbean|/people/jin.shin/blog/2007/04/27/sap-netweaver-xi-variable-substitution-with-adapter-specific-message-attributes-via-dynamicconfigurationbean]
Second Approach if the above approach doesnt work.
Use Dynamic Configuration concept in UDF to set the filename under message Mapping.
Thanks,
- Gujjeti.
Edited by: Praveen Gujjeti on Feb 25, 2009 11:25 AM

Filename in J2SE Adapter with Variable Substitution

Hello,
Within the J2EE receiver fileadapter (and ftp) from SP13 it is possible to compose the target filename and directory based on the payload of a message using variable substitution.
I wonder if it is also possible to use variable substitution with the J2SE fileadapter. For this it is not documented but i thougth that the same java libraries are used for the J2EE an J2SE file-adapters.
Aybody??
Really Nobody??
Message was edited by: Emile Hermans

Hello,
the J2SE Adapter does not support variable subsition. Therefore we created our own class which gets called from the main SAP XI class "XMB2FileProcessor.class" wich is in the jar "aii_msg_adapter.jar". In your own class you can do what ever you need to chane the file name. In the configuration you can set your own parameter to search the payload for a string you want to replace. We also had to come up with our own timestamp, e.g. file2005-11-10 which SAP does not let you do, only the full timestamp is possible.
One other nice thing is that you can develop our JAVA class local and test it with your local J2SE Adapter Engine on you PC before you deploy it.
Steps to do:
1. JAD the SAP class
2. Put a call in the SAP class
3. Compile the class
4. Put the class back in the archive
5. Create your own class
6. Create a jar file for it
7. Put the jar file in the tech_adapter directory
8. Change the run_adapter start cmd to include your jar file
It works great, the only issue is if you patch the J2SE engine you have to do step 1 to 4 again but that should it very easy to do.
Cheers
Stefan

Problem with variable substitution.

Hello,
I asked this before but now I want to change the question focus.
I have scenario from IDOC to XML file.
The scenario is digital invoice for our company in Mexico and I end this scenario with java mapping that I import from SAP marketplace.
Now I have request to add to the XML file name the content of the field "<ODN_NUMBER>" from the XML data.
I try to use with variables substitution.
My payload is:
<?xml version="1.0" encoding="UTF-8" ?>
- <ZINVOIC02>
- <IDOC BEGIN="1">
- <EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>400</MANDT>
<DOCNUM>0000000006599015</DOCNUM>
<DOCREL>700</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>INVOIC02</IDOCTYP>
<CIMTYP>ZINVOIC02</CIMTYP>
<MESTYP>INVOIC</MESTYP>
<STDMES>ZEDI</STDMES>
<SNDPOR>SAPDEV</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>DEV400ECC</SNDPRN>
<RCVPOR>SAPDEV</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPFC>LS</RCVPFC>
<RCVPRN>MX_INV</RCVPRN>
<CREDAT>20100118</CREDAT>
<CRETIM>075931</CRETIM>
<SERIAL>20100118075931</SERIAL>
</EDI_DC40>
- <E1EDK01 SEGMENT="1">
<CURCY>USD</CURCY>
<HWAER>MXN</HWAER>
<WKURS>10.55530</WKURS>
<ZTERM>0090</ZTERM>
<KUNDEUINR>ACH971209KRA</KUNDEUINR>
<BSART>INVO</BSART>
<BELNR>0100017295</BELNR>
<BRGEW>0.045</BRGEW>
<GEWEI>KGM</GEWEI>
<FKART_RL>LR</FKART_RL>
<RECIPNT_NO>0000012977</RECIPNT_NO>
<FKTYP>L</FKTYP>
- <Z1EDK01 SEGMENT="1">
<XML_VERSION>2.0</XML_VERSION>
<ODN_PREFIX>A</ODN_PREFIX>
<ODN_NUMBER>1883</ODN_NUMBER>
<DATE_TIME>2009-11-01T17:05:10</DATE_TIME>
<DOC_SUB_TOTAL>4.22</DOC_SUB_TOTAL>
<DOC_DISCOUNT>3.00</DOC_DISCOUNT>
<DOC_TOTAL>1.40</DOC_TOTAL>
</Z1EDK01>
And the xml that I create is:
<?xml version="1.0" encoding="utf-8" ?>
- <Comprobante xmlns="http://www.sat.gob.mx/cfd/2" version="2.0" serie="A" folio="1883" fecha="2009-11-01T17:05:10" sello="NxZCWU8hMJMiEc2fSZafpS81Z9rUScbBotvJ8lcW76GGpmcD2lFyAV7DlNQKecYMnQJnwMVoHfGjzhpFJrjLuRcyqU3nOnH1mE1JMxY/MjLkal0Ybo2aRKCorQxx+F/Vy5ucvyeDDFAt2gx0PeHJhFS3tJ6ssc6nryz3iUr8c=" noAprobacion="49806" anoAprobacion="2009" formaDePago="Pago en una sola exhibiciףn" noCertificado="00001000000100891274" condicionesDePago="90 DAYS FROM BILL OF LADING" subTotal="4.22" descuento="3.00" motivoDescuento="Customer DiscountCustomer Discount" total="1.40" tipoDeComprobante="ingreso">
- <Emisor rfc="NMS940324RY6" nombre="Netafim Mexico S.A. de C.">
<DomicilioFiscal calle="Leibnitz" noExterior="20" noInterior="901" colonia="Anzures" localidad="Mexico city" municipio="Miguel Hidalgo" estado="Distrito Federal" pais="Mexico" codigoPostal="11590" />
</Emisor>
- <Receptor rfc="ACH971209KRA" nombre="AGRICOLA 5 HERMANOS SA DE CV">
<Domicilio calle="JUAN DE LA BARRERA NO 1249 NORTE" localidad="COL. CHAPULTEPEC" municipio="CULIACAN" estado="Sinaloa" pais="Mexico" codigoPostal="80040" />
</Receptor>
- <Conceptos>
I try to use with this variable:
payload:ZINVOIC02,1,IDOC,1,E1EDK01,1,Z1EDK01,1,ODN_NUMBER,1
I received in RWB the error:
Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: var_filename
Thank you in advance for your help
Elad

But my target is looks very strange:
<?xml version="1.0" encoding="utf-8" ?>
- <Comprobante xmlns="http://www.sat.gob.mx/cfd/2" version="2.0" serie="A" folio="1883" fecha="2009-11-01T17:05:10" sello="NxZCWU8hMJMiEc2fSZafpS81Z9rUScbBotvJ8lcW76GGpmcD2lFyAV7DlNQKecYMnQJnwMVoHfGjzhpFJrjLuRcyqU3nOnH1mE1JMxY/MjLkal0Ybo2aRKCorQxx+F/Vy5ucvyeDDFAt2gx0PeHJhFS3tJ6ssc6nryz3iUr8c=" noAprobacion="49806" anoAprobacion="2009" formaDePago="Pago en una sola exhibiciףn" noCertificado="00001000000100891274" condicionesDePago="90 DAYS FROM BILL OF LADING" subTotal="4.22" descuento="3.00" motivoDescuento="Customer DiscountCustomer Discount" total="1.40" tipoDeComprobante="ingreso">
- <Emisor rfc="NMS940324RY6" nombre="Netafim Mexico S.A. de C.">
<DomicilioFiscal calle="Leibnitz" noExterior="20" noInterior="901" colonia="Anzures" localidad="Mexico city" municipio="Miguel Hidalgo" estado="Distrito Federal" pais="Mexico" codigoPostal="11590" />
</Emisor>
- <Receptor rfc="ACH971209KRA" nombre="AGRICOLA 5 HERMANOS SA DE CV">
<Domicilio calle="JUAN DE LA BARRERA NO 1249 NORTE" localidad="COL. CHAPULTEPEC" municipio="CULIACAN" estado="Sinaloa" pais="Mexico" codigoPostal="80040" />
</Receptor>
I need to add folio field
Elad

Error in Variable Substitution

Dear All,
Result Payload:
<ns1:MT_Level1 xmlns:ns1="http://test.com">
<Header>
<Separator>,</Separator>
</Header>
<Detail>
<FileNumber>30</FileNumber>
<LinkToNextLevel />
<Expansion1>0</Expansion1>
<Expansion2>0</Expansion2>
<Expansion3>0</Expansion3>
<Expansion4>0</Expansion4>
</Detail>
<Detail>
<FileNumber>30</FileNumber>
<LinkToNextLevel />
<Expansion1>0</Expansion1>
<Expansion2>0</Expansion2>
<Expansion3>0</Expansion3>
<Expansion4>0</Expansion4>
</Detail>
<FileNode>
<FileName>test.txt</FileName>
</FileNode>
</ns1:MT_Level1>
I want to use "File Name" in the "File Node" node for my variable substitution.
In the configuration:
File Name Scheme = %filename%
Variable = filename
reference = payload: Messages, 1, Message, 1, MT_Level1, 1, FileNode, 1, FileName, 1
Note: I'm using multimapping (1 to N).
File Name path is /ns0:Messages/ns0:Message2/ns1:MT_Level1/FileNode/FileName ( from right click in the file name --> copy path).
I got following error:
"Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: filename"
Please advise!
Best Regards,
Victor.

Dear All,
My problem is solved!
The issue is because I don't put the interface mappings sequence as the same sequence as the message mappings sequence. Hence the structure name that i put in the variable substitution all are not match with the structure name in the payload even though all have the file name element.
So what i did is i have to reorder the sequence of my message mappings to be the same sequence as the interface mappings sequence.
Thanks for all that trying to help!
Appreciated it guys.
BTW, for the variable reference it's correct that i no need to put message and message2 as the reference.
payload:MT_Level1,1,FileNode,1,FileName,1 will do.
Best Regards,
Victor.

Error-Receiver File Adapter using Variable substitution when file is empty

XI Experts,
We are on PI 7.0, SP14.
We are using variable subtitution to get the filename from source message. This works fine as long as we have data in the payload for filename element. But we have a scenario where we don't have to create file when certain condition does not exists in source message so in the message payload filename element will not exists in such condition and file will be empty and we should not create file.
Parameter in the communication channel for Handling empty message is "Ignore".
Does anyone knows how to handle this scneario. We don't want to default any file name in the message mapping if source file name element does not exists.
We are following getting error in the Adapter engine.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file
Thanks
MP

You can implement this by writing the module to throw an exception or whatever method you want to execute.
If you don't want to receive an error message then module is suitable for you.
Gaurav Jain

Variable Substitution not working correctly?!

Hello all,
perhaps some of you faced the same problem. It depends on the variable substitution in XI (PI).
We have got an IDOC - FILE szenario. As far everything is working fine. The XML is created correctly.
Now we want to get two fields from the payload to use both in our receiver file adapter as filename.
The IDOC is a standard ORDRSP.ORDERS05.
(1) The first field is the "job number" and located in the IDOC element: E1EDK01
(2) The second field ist the "purchase order number" and located in the IDOC element: E1EDK02
The fields are both named BELNR (and here seems to be a problem).
To use the variable substitution we did as it is described in help.sap.com and used the following path to get the variables from the payload:
(1) variable name: aufnr ; reference: payload:ORDERS05,1,IDOC,1,E1EDK01,1,BELNR,1
(2) variable name: bstnr ; reference: payload:ORDERS05,1,IDOC,1,E1EDK02,1,BELNR,1
these two variables "aufnr" and "bstnr" we want to use in our filenameschema. So we wrote the following for the schema:
Ordrsp_%aufnr%_%bstnr%.xml
The effect is that both variables always contain the same value, the value of "bstnr".
Strange is that, if we delete one substitution i.e. (2) "aufnr" contains the correct payload value. It seems he overwrites the value of "aufnr" with the value of "bstnr" because of the same name in the IDOC structure (BELNR).
Has anyone any idea what to do?
Many thanks and kind regards,
Steven
PS: Of course points will be rewarded for helpfull answers. :o)

Thank you for your answers!
But there are several Problems using a dummy field in an IDOC structure. We have got a naming convension so that we can't create an IDOC-like structure named ORDRSP.ORDERS05.
But perhaps I am thinking to complex and there is an easier way to add a dummy field to an IDOC structure.
Could you perhaps also suggest a solution for that dummy field problem?
Many thanks and kind regards,
Steven

Variable Substitution - How do I use a segment atribute ?

Hi all, I'm facing a problem with variable substitution in receiver comunication channel.
I got the follow message:
<?xml version="1.0" encoding="UTF-8"?>
<lote nro="000262007">
<etc>...</etc>
</lote>
I want to get atribute nro from segment lote to use in variable substitution, how can I do it?

Variable sucstitution doesnt allow a way to achieve this.
There could be some workarounds
1. Use some dummy element in ur xml message with same value as tht of the attribute.
2. Use adapter specific message attributes or dynamic file name functionality
Regards,
Prateek

FileName using Variable Substitution Method

Hi SAP experts,
I need some advise regarding this.
I have here sample structure of message,
DT_Root --> root node
Tree --> occurence is 1 to unbounded
    SubTree1
    SubTree2
    SubTree3
What will be my File Content Conversion parameters to be set in Variable Substitution Method in order for me to get the value of SubTree3 and make it as my filename?
Also, the value of SubTree3 must not be present on my actual payload..
var1:payload,1,SLI,1   ---?? what if it is unbounded?
Kindly advise.
Thank you very much.

Hi Raj,
I cannot open the link.
Anyway, is it ok if you will advise me regarding my question a while ago?
I have here sample message structure,
CSV --> Message Type
SLI --> 1 .. unbounded (occurence)
subSLI1
subSLI2
subSLI3
FileNode --> 1..1 (occurence)
FileName --> 1..1
Here's my parameters in Variable Substituion method,
FileName Scheme: %var1%.csv
var1   -- payload:CSV,1,FileNode,1,FileName,1
File Content Conversion Parameters:
Recordset Structure: SLI,FileNode
SLI.addHeaderLine: 3
SLI.headerLine: PERIO;EAN;ILN,....
SLI.fieldFixedLengths: 8;10;13;...
SLI.fixedLengthTooShortHandling: Cut
SLI.fieldSeparator: ;
SLI.endSeparator: 'nl'
FileNode.fieldFixedLengths: 0
FileNode.fixedLengthTooShortHandling: Cut
I must the output flatfile with a value of the filename in the FileName field.
And the content of the flatfile must look like this,'
PERIO;EAN;ILN;SALES;TURNO;PERFL;SUBSFL;SALUN;%CURRENCY%;STOCK;STOUN;ARTNR;ARKTX
20071020;737052020198 ;4333342000008;         1;        9.95;W;X;ST ;EUR;0000000000;ST ;
20071020;737052056852 ;4333342000008;         1;       14.50;W;X;ST ;EUR;0000000000;ST ;
20071020;737052073552 ;4333342000008;         1;       12.95;W;X;ST ;EUR;0000000000;ST ;
*each field has a fixed field length.
Kindly advise if my set parameters are correct.
Thank you very much!

Variable substitution error in Prod- Urgent

Hi Friends
I transported my objects from dev to production and one of my scenario started giving this error .
Please guide
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: store: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: store.

this error is beacuse the variable substution which is specified in the rceiver file adapter is failling....
ROOT cause:
goto the receiver file adapter of the interface you have moved into PRD...you will c the filename somethinglike this
%var%.txt...below you will c a variabel substuition screen
var payload:..........
check the foeld which is refering from the target strcuutre...the data is not coming into this field of variable substuition...so it is thorwoing this error.....
this is considering the variable substution path is right? i belive it is right since you haev omved this to PRD from Devlopment...if this was working in development...check the data is coming in that field.
wehen you did a tranposrt into PRD you went to the change list did u edit the rceiver adapter mandatory fields according to the PRD envinorment? dd u also make sure the variabel substution is not touched when you did this?

Variable substitution from flatfiles

Similar Messages

Maybe you are looking for