Various Interpolator for the same object

Hi !!...I need to use 2 interpolators for the same object, but i dont know how to do it without make a cyclic graph...Any ideas ?
Thanks a lot!.
CA.

Hi,
the scene graph should have the following structure:
[arbitrary Group]
|
|
[TransformGroup1] <- [Interpolator1]
|
|
[TransformGroup2] <- [Interpolator2]
|
|
[object to transform]
You have to make sure that two different TransformGroups are used, otherwise the Interpolator scheduled as the last one will overwrite the changes previously made by the other Interpolator.
The order of the TransformGroups is also important, especially if a rotation or scale is involved.
Regards
Fleischer

Similar Messages

Multiple Transports for the Same Object.

I have ABAP program 123 and I make a change, create transport A and release the transport. I do not request transport A go to production.
I then modify ABAP program 123 again, create transport B and release the transport. I do not request transport B go to production.
Now I request transport A go to production.
Can someone explain to me why the changes in transport B are included when transport A is moved to production?
I thought each transport would be at its own change level.
Thank-you.

I can guarantee all of you that when Transport A was moved, it contained changes that were made in Transport B.
Surely you understand that Thomas is correct and that there's a logical reason, not related to transport layer configuration, for the issue? You CAN have multiple transports open for the same object without a lock by forcing it but check the dates as already suggested...

Can we have multiple transports for the same object.

Hi guys,
Can we have multiple transports for same object in dev system. Can anyone tell me how can this be done.
Thanks

Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
Only after releasing the tr you can create a new tr on the same object.
Message was edited by:
Abhishek Jolly

Two selection option-variables for the same object

Hi,
I'm using two selection-option variables for the same characteristic in my query:
One is authorization variable and the other is used for restrictions (filter) in a selection screen.
I get an error: SELOPT/Query variable .... does not allow any further selections.
If a selection option-variable is used, no additional selections can be specified for this characteristic in this element.
Is there a way to overcome this problem?
Thanks,
Hagit

Hi,
I have solved the problem by changing the authorization object (in RSECADMIN) from range to single value and also the variable in BEx from selection single value.
To be more clear:
object in RSECADMIN was: infoobject BT var1 - var5
I have changed it to:
infoobject EQ var1
infoobject EQ var2
infoobject EQ var3
infoobject EQ var4
infoobject EQ var5
Hope this helps.
Hagit

Multiple inserts for the same object

We have observed that in certain cases, the same object is attempted to be inserted twice, resulting in Primary Key violation.
Here is one example -
A(1->1)B, unidirectional, A has the foreign key to B
new B
copyB = register(B) (also assign sequence number)
new A1, A2
A1.set(copyB), A2.set(copyB)
register(A1), register(A2)(also assign sequence number)
commit
it tries to insert the same B twice.
any clues whats wrong here?
thanks

Any chance your 1:1 from A to B is marked as privately-owned?
This would indicate to TopLink that the object in each relationship is unique and should be inserted.
Doug

Command to see host and static nat for the same object together

I have researched this but cannot find an answer. ASA running version 8.5.
When you create the config using object NAT you enter the commands as follows
object network <object name>
   host x.x.x.x
   nat (inside,outside) static y.y.y.y
When the config is displayed it separates the host and nat commands in two different sections of the config as follows
object network <object name>
   host x.x.x.x
object network <object name>
   nat (inside,outside) static y.y.y.y
Is there a command that will display it all together (like it was typed in)? Show NAT is something like what I am after but without all of the extra info such as translate_hits, untranslate_hits etc. I need this information but cleaning up the output of a show nat is going to be tough.
Any suggestions?
Thanks.

Sorry, show nat detail is what I meant in the original post in place of show nat.   Show nat detail still has all of the extra info I was trying to avoid. Guess I will be editing a text file.
Thanks for the reply.

Multiple MM schedule lines for the same date

Hello All Gurus,
I am facing a problem where the MM schedule lines are divided into various quantites for the same date. For example on 02/11/2010 the total quantity is 120, it is appearing in the below form in ME38:
02/11/2010 - 40
02/11/2010 - 40
02/11/2010 - 40
Although this is not an error, but my client is not happy with this. Can someone tell me why I am getting this error? Is it because of the rounding value that we maintain in MRP 1 view of material master record? Or is there any other setting that I am missing?
Please let me know. I would be very much thankful to you.
Thanks and Regards,
Umakanth

Hi,
Before changing the setup, note that sometimes it is beneficial to split one demand into multiple delivery schedules. Especially if the demand is bigger than equipment type (container/truck etc.). If you want to manage inbound transportation for such delivery schedules, it is much simpler to do this when each delivery schedule is not bigger than one equipment.
Regards,
Dominik Modrzejewski

The same Object Version Number for the same person id multiple times

Hello all,
I am currently facing an issue with HRMS tables and the object version number for employees. I am trying to write a report but due to the same object version number for the same person appearing in several row i am getting duplicate information. For example,
person id 91 object version number 32 is on 4 rows and i have no idea why...help please guys, I'm at a lost so far 50 people are facing the same issue.

Hi Baal666bobo,
The person table is date-tracked, so the PK has effective start and end dates as well.
Get the correct record with sysdate(or any particular date) and then check the OVN.
Cheers,
Vignesh

Add advanced action to submit button and setting different objectives score for the same course

Hi, i would like to increase a counter in a quiz slide when the user press the submit button, using advanced actions.
It's like if the submit button is somehow inhibited from certain options, and i cannot find how to add an advanced action to it.
what i need, is to allow unlimited attempt until the user selects the right answer. each time the user click on submit, a counter increases by one. When user finally select the right answer, we read the counter value and assign a different score, depending on the attempt (for example: 1st attempt=20 points, 2nd attempt=10 points, 3rd attempt=0 points)
After that, i need to save all score obtained for a certain group of quiz slide separately from the "main score" (i think the main score is stored in cmi.objectives.0.score) to have partials scores for a course. I examined the "advanced interactions" panel and i noticed that for each quiz slide there is a specific interaction ID and each quiz slide is associated typically to the same Objective ID. What i need is to associate different groups of slides to different Objective ID's.
In Storyline i was able to do this by passing to the lms a cmi.objectives.n.score (where "n" is the place in the objectives array) and i did it by executing a javascript on success for each question slide. (each javascript added the score of previous slides in the same group to obtain the total score of the group to be passed to lms with a specific function).
examining captivate scorm functions in the published scormdriver.js i found the following function
function SCORM_SetObjectiveScore(strObjectiveID,intScore,intMaxScore,intMinScore)
so i think it can be done the same way in captivate executing javascript in the right way.
Is there also an easier solution to write different scores to different obectives in the same course?
many thanks for any help!

Have a look at:
Question Question Slides in Captivate - Captivate blog
Question Question Slides - Part 2 - Captivate blog
Indeed, Submit button is part of the Question slide, not a normal button. You can add a custom shape button, but it will never replace what happens when the Submit button is clicked: validation of the answer, showing captions, adding to score etc. Making the score depending on the attempt is not possible with default functionality, it is possible with custom question slides, but then the reporting to LMS is another issue. You should try to do it by JS, or if you only need SWF-output you could use the Master widget by InfoSemantics.
Link score to attempts in Custom questions - Captivate blog
Lilybiri

"Show List of values" showing different values than "Preview List of values for the same dimension Object

Hi All,
I have a dimension object in Business Layer which is showing a different values than the original database values. When I right click on the object and select "Show List of Values its showing values which are not related to the original values in the database but if I right click on the same object and select "Preview List of Values" it shows the right values present in the database. Any suggestions on how to rectify. It was working good and many reports have been built using that particular dimension.
Is there any way to fix the problem without the deleting the object or recreating another similar object as the object has been used in several reports, so by deleting or recreating the object may break the reports.
Please help!

Hi
A list of values is a list that contains the data values associated with an object, Lists of values inserted in the data foundation are inherited by any business layer based on the data foundation.
Right click on the object and select “Show Values”… Display all the DB values including null
Preview List of Values – also display same values...getting differnece meens...Check weather using any Static List of Values.
If you uncheck the Associated list of values check box "Preview List of Values" options is disabled.
For best practice …LOV is disabled for un-necessary dimension objects
Also If you have Db access check the correct data by
SELECT
Distinct Schema name. Table/View name. Object name
FROM
Schema.name. Table/View name

Vector clone references the same objects??

Hi all
I'm developing a simple chess program.
Obviously, each move the user tries must be checked against the following sets of chess rules:
1.) Whether it is that colour player's turn to move
2.) Whether this move is valid for this specific piece (eg. 3 forward for a King --> invalid of course)
3.) Whether this move will jeopardize the player's king (put it in check)
If from any of the above the move is found to be invalid, the move is not executed.
My program structure is briefly this:
A. abstract super class 'ChessPiece' - subclassed by the various specific Chess Piece classes.
Each of the specific ChessPiece subclasses must implement an abstract method to check if a
proposed move is valid, and also a method to actually do the move...
B. 'PieceManager' class - has a Vector of ChessPieces:
This class checks whether the given move is valid:
For the piece: by calling the checking method (see A above)
For the general game: by making sure the given move doesn't put the player's king in check.
NOTE: In chess (for those who don't know), it is illegal to move any piece if, at the end of
the move, your king will be in check [possible to be captured by any enemy piece]
This last check I want to do in the following way:
1) copy/clone the entire PieceManager object
2) in this copied object, actually do the move
3) still in the copied/cloned object, see if the moving player's king is now in check
4) based on this evaluation, execute the move in the original PieceManger object or don't...
The Problem:
When I clone this PieceManager object, its 'pieces' Vector is obviously also cloned.
BUT it seems that the cloned 'pieces' Vector references the same ChessPiece objects
as those referenced by the original 'pieces' Vector; ie the 2 Vectors are sharing the same Objects.
Thus, when I actually execute the move in the test/cloned PieceManager object,
the original PieceManager's corresponding piece is moved too (well, it seems it is the same piece...).
I am pretty stuck with this.
I've tried the Vector clone method; it doesn't seem to copy the objects, but create another reference
to the same objects, as I've said.
I've tried cloning the entire object ; also not helping......
I'd love any comments, helpful pointers, suggestions.
Also any comments on my program structure... is a Vector the best tool for this job?
Thanks very much -
lutha

Hi all, OP here.
Ok thanks guys for all your posts...
two points:
1) I have tried the "copy constructor", and it seems to be doing the same thing. (ie 'shallow clone')
What's really frustrating me is that nothing I do seems to actually physically copy the Vector's objects
to new, separate copies of those objects...
I had my PieceManager class implement Cloneable (just in case - not too sure on that one; in fact I
commented that out later), and I overrode the clone method like this:
public Object clone ()
        PieceManager pm = new PieceManager ();
        Vector pcs = new Vector ();
        // Enumeration e = pieces.elements ();
        //while (e.hasMoreElements ())
        //    ChessPiece p = (ChessPiece) e.nextElement ();
        //pcs.add ();
        //} // still references the same objects!!
        pieces.trimToSize ();
        int size = pieces.size ();
        Object[] arr = new Object [size];
        Object[] initial = pieces.toArray ();
        System.arraycopy (initial, 0, arr, 0, size);
        for (int i = 0 ; i < size ; i++)
            ChessPiece p = (ChessPiece) arr ;
pcs.add (p);
pm.pieces = pcs;
return pm;
This all still does the same 'shallow cloning'...
2) m.winter, my ChessPiece objects are not immutable - they have a co-ordinate field that
changes as they are moved. This is for getting as called by another object, and for checking in
the ChessPiece's own internal method for checking whether the passed-in square co-ordinate
is a valid destination.
Anyway, I don't think that's the main issue here. How can I properly clone/copy a Vector, resulting
in :
a) the original Vector
b) a new, totally unrelated Vector.
Thanks again all for your input.
regards,
lutha

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

How can I use the same object in the different jsp files?

I am doing a project. I have finished my jave source files and compiled them successfully. And I also wrote a main method to test my classes, they also worked well. Now I am trying to use my jave code in the jsp files. But I meet a problem, in my method of java source file, I can generate a object of a class, and use it in the whole main method. But in the different jsp files, how can I do same thing?
For example, in the .java file,
Vector vl = new Vector();
While ...{
vl.add(...)
In each of my .jsp file I want to do one loop of the above, meanwhile I want to do that in the same object.
I hope you can understand what I mean. Really need your help!

put your object into a session and you can the use it in all the jsps as long as the session is valid. Or you could create a static variable in the class that only creates one instance off an object and then create a static method to return this object.

How do I set up multiple Creative Cloud accounts for the same login?

I have a number of Macs of various flavors. I want to install Creative Cloud apps on four of these units.
I have a subscription currently which I am using for my MBP 17, and a 27" iMac.
I want to add an account for my MB Air and Mac Pro, and I'm willing to double my subscription fees to do it. (I use different apps on each of the computers, though I like the idea of having the ability to use them all on each.) How do I accomplish this addtional subscription without having to add a new Adobe account?
Second Question:
I have the one-year special on my current subscription due to licensed PS 5.5. ($29.95/mo). Would I be eligible on my second subscription for the same deal due to the license on the PS 5.5, or would I qualify due to being a Acrobat Pro 8 owner... or Licensed owner of previous versions of PS? OR.... would I immediately be paying $49.95/mo for the second account?
Either way, I'm in. Just want to do it all under one account if at all possible.
Thanks in advance for resolution. Cheers.

Currently all subscriptions (with the exception of Team Ready) require a separate Adobe ID for each Creative Cloud Membership. Its not possible to have two memberships under the same Adobe ID.
Adobe has a Team Ready offering for customers interested in a volume license for Creative Cloud. This is a TLP volume license to Master Collection CS6 and includes licensing for Lightroom and Muse. Customers with this will transition to Creative Cloud Team once available later in 2012. This product uses only a single serial # and Adobe ID. It's not the same as Creative Cloud Membership like what is currently available, but rather a means to get customers setup with something now to transition to the volume license Creative Cloud Team offering once available. If this sounds like something you would be interested in please contact a local Adobe Reseller for more info.
This link has more info:
http://www.adobe.com/products/creativesuite/companies.html
This link can help someone find a reseller in NA
http://partners.adobe.com/resellerfinder/na/reseller.jsp?nav=al
I just read over the terms of the introductory offer and it is a 1 per customer offer, so it would be 49.95/mo for a second account.
https://creativecloud-specialoffer.adobe.com/special-offer/?loc=en_US
Hope that helps,
-Dave

Multiple sessions for the same user

Hi,
The scenario is like this. The user is logged into the system using JAAS and
has a session object created. I want to create a new session for the same user
with the already available credentials. This is to provide the same user the access
to the application in another window with different session object. How can do
that in Weblogic 8.1 server ?
thanks in advance,
Krishna.

Hi
I think it would be easier to enable session time out settings using GPO considering you work in a domain environment..
Having session timeouts settings you could say... hey after 15 min of inactivity disconnect the user and then after 15 min of disconnected session log him off
Take a look at this URL: http://technet.microsoft.com/en-us/library/cc754272.aspx
Hope this helps
Best regards
Joaquin Camarero Muñoz

Various Interpolator for the same object

Similar Messages

Maybe you are looking for