VC Areas ?

Hello aLL,
How r u ?
Currently I am into BW and just started learning VC. I have few questions like
1. like in BW we have
-Modelling
-Extraction
-Reporting, etc. likewise what would be the structure for VC ?
*This will help me to sort out the materials and links.
2. To start with VC what are all the documents & links are available ?
3. We have installed VC and we could see the storyboard. but the source systems are not shown !? even after connecting to our portal the source systems are not shown. any ideas ?
Best Regards....
Sankar Kumar
+91 98403 47141

Welcome to the world of VC.
ad 1) VC is a pure prcess and UI tool. It does not extract data; i you have more specific questions, feel free to post for each question a separate posting (don't forget to read the documentation first or search the SDN. There is already a lot of material out there. End of October there will also be a VC book available)
ad 2) https://www.sdn.sap.com/irj/sdn/visualcomposer
ad 3) see How to Resolve Visual Composer Issues:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/92d80512-0a01-0010-32a3-cd3735bd9275

Similar Messages

In order to create space on my MBA I just bumped iTunes media to G drive linked through Time Capsule. Now pointed iTunes at new iTunes libary on G drive and, even though all music files are there, iTunes can only 'see' 10 albums. Any help appreciated.

Bit more detail...
Mac Book Air has been struggling for space for a while so I bough at time capsule a) for back up and b) to host my itunes folder remotely. This didnt' work. I took it into the Genius bar and the genius there told me that time capsule is not designed for anything other than back up. Instead I have to connect a G drive through the time capsule's wireless router to my MBA.
I followed his instructions - moved my files from the Time Capsule and MBA directly onto the G Drive - which took a heartening 2 hrs so something must have been happening - and the held down 'Alt' when starting iTunes and selected the new itunes folder as the location of my itunes libarary which I wanted iTunes to 'point at'. When I opened iTunes only 10 albums are visible now.
In ITunes advanced preferences it says it is pointing at the correct folder. The files are all cleary there when I open the G Drive folder to take a look. But I cannot get iTunes to find them.
Any suggestions?
Secondary challenge - in spite of deleting the original itunes folder on my MBA I still get messages pop up telling me my start up disk is out of space and I need to clear some - I expected to stop getting this message now I had done this exercise above. I have emptied Trash. Again - any pointers appreciated. I am new to this world of 'intuitive' macbooks.
Cheers

After admittedly only a quick read the one thing you don't say is how you are trying to make this move. Most people with moving library issues do it the wrong way. Plenty of web sites tell you how to do it the wrong way.
If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive.

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

Fields for creation of BP in cProjects front-end are read-only

Hi everyone,
I'm a beginner in SAP-Development/Customizing so I hope this question isn't too easy
I can't create a Business Partner using the cProjects front-end (Ressources > Staffing) because the necessary fields and buttons are read-only... (> web-Dynpro Component: DPR_ROL_STAFF; View-Info: VI_SEARCH_CREATE)
I'm using CPRXRPM 450_700 patch 0006
The field-control is standard-SAP (0SAP).
My user-account has all cProject-roles + SAP-ALL
I assume i can change the behaviour of these fields in the Field Control but I can't identify which is the corresponding Object Category to apply the changes.
- Is there a documentation which field belongs to which Object Category in Field Control?
- Or can somebody tell me a procedure to find it out on my own?
Thanks in advance

Hi,
generally it is recommended to use transaction BP or ALE distribution to get the business partner be created.
If you would like to create the BP in web UI directly, the user must have the Structural Authorization, see customizing path:
Collaboration Projects -> Resource Management -> Organizational Management.
It is very HR related topic, you may contact a HR consultant to know more details about it.
Kind regard,
Zhenbo

Filename in non-english are not saved correctly

hi
I recently (last week) installed archlinux.
I come from manjaro so I am to some extent familiar with archlinux.
now I am trying to solve some issues that have poped up in arch that there were not in manjaro( mostly because manjaro was pre-configured).
when I use jdownloader to save youtube videos the files names are displayed correctly in jdownloader but not in konsole or dolphin file manager. (they are shown as "????" characters).
this happens for Persian and Russian characters.
I thought this was jdownloader issue but this doesn't happen on my pc that has a manjaro installed on it.
and another thing that makes it weird is that if i create files in dolphin with say Persian language they are shown and treated correctly. but the ones that are created by jdownloader have this issue.
and another related symptome is that some files that I download from subtitle websites that are in zip format and have some rare European characters in them (like the French and German ones) I cant open them or extract them in dolphin file manager.
I had a similar issue like this in manajro but in manajro I used file-roller to open the files and that app would work with this files correctly.
but in archlinux even file-roller has this issue.
can somebody help me with this?

Lone_Wolf wrote:
rezad,
it was a long time ago i had that problem and locale handling is like a black box to me.
It's easy to reverse if it doesn't help though, why don't you try it ?
I have tried it.
adding other encoding before the famous en-US,UTF-8 one gives warning for default lang and falling back.
I see these error when running apps from command line.
adding other encodings after that encoding doesn't show this warning but i have a suspicion that it mean that other encoding are suppressed,
i have to try it with a file with a wired but known encoding and then adding that encoding to config and testing again.
my problem is how do i find the filename encoding?(not find content encoding)
this is the file in question. can somebody tell me what is the filename encoding?
https://www.sendspace.com/file/fwmxpc
EDIT: my findings on this matter.
even adding all the langs to /etc/locale.gen and then using locale-gen command doesnt fix this. cause this are different issues.
this problem as a whole doesn't have a solution, cause linux unlike windows doesn't have a default inbuilt filename encoding and it all depends on your environment.
linux just treat the filename in the encoding you tell it. so it cant detect anything cause there is nothing to detect.
from its perspective filename are just binary data ready to be interpreted as wished by the user.
widows on the other hand uses UTF-16.
plz if anybody have another contradicting point ,then reply but plz dont say I have to use correct encoding. the only way to fix it is using convmv util and that requires finding the correct original encoding.
thanks for all the replys.
Last edited by rezad (2015-04-20 14:45:14)

Sprint says Q10 can not access internet/data in Chas/Hunt WV area

So I upgraded to a new Q10 and spent a few hours loading and configuing all my emails, etc.
Driving to work this morning, I noted that there was no emails received after I left my house (wifi-enabled). Tried to open the Browser and received the error stating there was no connection to the internet. Wasted most of the workday fiddling with the settings --- no joy. So on the way home I stop at the Sprint store. I walk in and showed the guy my phone and said, "I need some help with this."
He immediately said, "No internet or data?" Dayum. He went on to say that BB 3G/4G v10 won't work in this area and that BB was aware of the problem. Something about Sprint sharing towers with Intelos and the phones won't recognize something. Over my head, but all other smartphones work here...just the BB Q10 won't.
Really bites --- when I'm on WiFi the thing rocks and is everything I need in a smartphone. So much better than my daughters iPhone 5...except for this.

Not sure if the same but
my brother is unable to get Data on his Sprint iphone unless its on LTE and most where he is is not LTE enabled.
It still makes calls and recieves calls but no data.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Service Desk - Expert Mode - Not all actions are available

Dear SAP colleagues,
I have just implemented the Service Desk in our SOLMAN system.
1. I choose Incident Management
2. I click on Queries
3. I click on a ticket (Transaction ID).
4. I edit the message
5. When I select Actions, I only have the 4 following options :
    - Send Message to SAP
    - Maintain SAP Logon Data
    - Display SAP Action Log
    - Update SAP Message
When I consult some demos, there are many differents options available in Actions menu, as, for example :
- Open System fro SAP
- Confirm Message to SAP
- E-Mail to Message Creator (Mail)
- Print Message
- Create Change Document
- Call Solution Manager Diagnostics.
Is it due to an missing authorizations (roles and profiles) ?
Thanks for your input.
Best regards
CP2009

Dear Rajeev,
First of all, thanks for your input.
I have choosen SIVA when I have activated BC Sets.
Should I activate also BC Sets for transaction type SLFN ?
1. I have started SPPFCADM and follow your recommandations.
2. I have choosen CRM_ORDER
3. I have then click on "Condition Configuration (Transportable Conditions)
4. There are many entries related to the Support and Service Desk
Example : Support Desk Message Action Profile
I have 5 actions defined -
Action 01 : Send Message to Processor
Action 02 : Create/Change Basis Message from CRM Procedure
Action 03 : Send Notification to SAP
Action 04 : Update Message from SAP
Action 05 : Confirm Message to SAP
I have activate BC Sets for transaction type SIVA, not for SLFN.
Best regards
CP2009

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

Portal Forms are not getting displayed in the new oracle environment.

Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
Tom

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

Comas(,) are not getting displayed in the output while using OO ABAP

Hi All,
I am using ABAP objects to display the ALV report in which there is a requirement to output Quantity fields. The Quantity fields are getting displayed without comas ','. Please help me in getting back the comas in the output.
Eg:
Below logic is used in my program.
Class name: cl_salv_form_layout_grid
Code:
obj_footer->create_text(
        row    = v_row_cnt
        column = v_col_cnt
        text   = Quantity).
Expected output:
39,545.000
Current Output:
39545.000
Thanks in advance for your help.
Thanks & Regards,
Siva.

Hi,
Please check if the images are in the server and in the /images alias path.
thanks,
Sharmila

Whenever a record is Edited the rows are not getting displayed in the repor

Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha L

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
          <mx:DataGridColumn headerText="Type">
               <mx:itemRenderer>
                 <mx:Component>
                  <mx:HBox verticalGap="2">
                      <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                      <mx:Label text="{data.type}"/>
                    </mx:HBox>
                 </mx:Component>
               </mx:itemRenderer>
            </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

VOICE MEMOS ARE GONE

hello, i have iphone 5s with software virsion 7.0.6
i plugged the iphone into itunes latest virsion (11.1.5) on my laptop to get to voice memos and transferre them to my desktop, i syncronized the iphone many times and i could see the voice memos and play them on itunes, but i couldnt copy them or export them. in the last syncronization i plugged off the iphone in the middle of sync proccess as a result i can see my voice memos on the iphone now but it doesnt play, the voice memos list is all in gray and doesnt play at all!
notice that with another iphone 5s and different computer i could see the voice memos, play them AND COPY THEM to the desktop without syncronization!
now, the question is if i plugged in the iphone to the itunes again, will the voice memos be back to the iphone?
if you have any suggestions please provide me with.

You should never try to sync your phone with more than one computer or you will lose your data. The pictures were not deleted because the sync process does not touch Camera Roll pictures (it only includes them during the backup step of the sync process).
If you had these voice memos on your phone when you last synced it to your first computer, and if you haven't synced to this computer since then, you could restore from the backup created during your last sync. This will replace the data on your phone with the data from this older backup so anything new will be lost. If you think that is the case, do not sync your phone again to the first computer prior to restoring from this backup or you will overwrite it and the backup will be lost. Instead, prior to connecting your phone to your first computer, open iTunes and disable automatic syncing by going to iTunes Preferences and on the Devices tab checking "Prevent...from syncing automatically". Then connect your phone and when it appears in iTunes on the left sidebar right-click on its name and select Restore From Backup and choose your last backup (containing your voice memos).
If you didn't have these voice memos on your phone when you last synced to your first computer, or if you have synced again to your first computer since losing your data, then your voice memos and other data are lost.

Photoshop CC work area troubleshooting on wacom tablet

Hi I have a very odd problem going on with photoshop cc while using my wacom tablet. For the most part it runs fine with no real problems whatsoever. I can work on photoshop normally until I move my cursor away from the wacom screen, back to my MacBook, and click out of the program. Once I do this the work area in photoshop disappears. specifically meaning the window where my current file is being made goes blank. everything around the work area appears the same, like the tools, tabs, etc. My only solution to this problem is to turn off and on the wacom tablet. It works fine after that until I click out of the program again. Its getting pretty annoying to deal with now so any help would be super appreciated. I will post pics to give you guys an example when I get the chance. Posting from my phone right now.
here are my specs:
Macbook Pro 15-inch
2.3 GHz Intel Core i7
4 GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 512 MB
OSX 10.9.2 (13C64)
Cintiq 13 HD

Is it just slow drawing, or is actual computation (image size, rotate, GBlur, etc.) also slow?
If the slowdown is drawing, then the most likely culprit would be the video card driver. Update your driver from the GPU maker's website.
If the computation slows down, then something is interfering with Photoshop. We've seen some third party plugins, and some antivirus software cause slowdowns over time.

Some items are grey on my iPad when in iTunes, but do not show up on my iPad

There are 3 TV shows that I loaded previously onto my iPad. I've deleted all three, but everytime I connect my iPad to my computer, the 3 shows are still present according to iTunes, though the titles are grey, not black. I can delete them, in the usual way, while in iTunes, but they reappear when I reconnect my iPad. All three shows were "free" featurettes, or full length shows from iTunes. They never show up on the actual iPad, just in iTunes if I am looking at the contents of my iPad. I have tried restarting my computer, and iPad--no luck. I also tried to re-download the show and reinstall it onto my iPad so I could delete again. Didn't work either. This doesn't appear to cause a functional problem, but is annoying. Suggestions?

Me too, i have the same problem with three music titles. Any solution ???

Songs that I have purchased are missing in iTunes (file not found/exclmation point), and do not show up in the iTunes Store for download.

I have a laptop that has (or had) pretty much all of my music, both burned from CDs and downloaded from iTunes. My 17 year old son on occasion syncs his iPhone and iPad with this laptop. As of the last sync (as best I can determine), many songs that I purchased in the past few years are now missing, in that they have an exclamation point to the left of the song title, and when I try to play the song, I get an error message that says "The song could not be used because the original file could not be found" or something to that effect. As it turns out, the file seems to be erased. This has happened multiple times, and I could be wrong, but I believe that there are some songs that had the exclmation point last time he synced that now don't, and vice-versa. There is not an obvious correlation or grouping as to why these songs are missing (e.g,. they were not all purchased on the same date, not all songs from one artist are missing, etc.).
Since most of these songs have been purchased through iTunes through my account, my reaction was to go to the iTunes store, log in with my account, and re-download them. Problem is, all of these songs instead ask me to purchase the song, instead of displaying a "cloud" logo. Therefore, it appears that I have to re-purchase these songs, which does not sound correct.
Questions: Does anyone know, most importantly (to get an immediate fix):
1. How can I re-download these songs and why doesn't iTunes Store recognize that I have already purchased them?
and perhaps as important (more of a long-term question):
2. Why does this happen and how can I prevent this from happening again (since it has happened multiple times)?
Thanks.

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

I have bought songs from ITunes and they are not showing up on my IPhone.What is the problem,and how can it be rectified?

Can someone please help me with this.I have upgraded to new IPhone 4's.In my music section,I cannot get all of the music that I have bought at ITunes.Some of the songs are on one IPhone but not the other.How do I get the songs on both IPhones?

Were the songs in question downloaded directly on the device or synced from iTunes on the computer?
Content does not magically appear on the device.

VC Areas ?

Similar Messages

Maybe you are looking for