Video Output ALWAYS dictates Audio Out!!??

I have a Black Magic card in my system. To save space on my working monitor, I'm viewing my movie from the output of my Black Magic card on an external monitor. However, the audio is also being sent to this monitor. I'd like to do my mix with my headphones, and not on the crappy monitor speakers, but every time I change the video output, the audio always gets sent to the monitor. I have to watch the video in a window on my monitor to be able to listen over headphones, which is a waste of space. Why can't I control this?
In my audio prefs, audio output is set to built-in output.

Weird, I have both setup, Windows 7 with Lenovo Graphic Driver and Windows Server 2008 R2 with Nvidia Driver, both have audio output.
Try to go to Device Manager to see if there's anything called Nvidia High Definition Audio, for me, I have 4 same devices. If there are unknown devices, install it manually with inf files.
Best Regards
Peter

Similar Messages

Premiere Pro CC 2014 - Video playing faster than audio - Out Of Sync?

Hi All, It's been some time since I've had to write about any problems here. Sooo, I've got Adobe Premiere Pro CC 7.2.2. (Using AJA KONA IoExpress BoB)   I've imported a 5 minute AVI file (video=1920x1080, Data=65587kbps, Total=66355kbps, 30fps. - - - Audio=768kbps, Channels=Mono -and/or- Stereo, 48kHz) from my Livestream HD-500 Digital Recorder as I have been doing successfully for some time now.. .   The video file plays just fine using windows media player but when I inport into a new project. The visual Video is out of sync. Seems like the Video is playing about 1/3rd faster then the normal audio. Any thoughts? - - - - - - P.S. Here is a (520mb file) public link of a 1min.40sec. Clip using GoDaddy's FileFolder:
https://files.secureserver.net/0suHs98nozqsKz
Here's a 20 second clip from last weeks trial-run-test using exact same configuration that worked just fine:
Online Storage - Download File
UPDATE - Problem Solved
So i got a call from AJA (the Manufacturer of my IoExpress Break out Box for Premiere)
Here's the Scoop:
1. When Programs "AutoUpgrade" it's common for some or all Settings to revert to their Default Settings.
2. Adobe Premiere CC auto-upgraded yesterday when I wasn't looking... (paying attenion)
3. In Premiere, Preferences>Playback>AudioDevice was reset back to "AdobeDesktopAudio".
4. I reset the reset back to AJA KONA IoExpress, and WALLA! It Works Great!
I hope this post will help others stuck in this seemingly unfixable situation. My clients will be very happy today. :-)

Just for some reinforcement on this subject, these are the settings recommended by Aja for running their hardware in CC 2014:
Make sure you audio is configured like this:
1. In your MacPro System Preferences:
    Set the input for Line in.
   Set the output for Built in.
2. In your PremierePro Preferences:
   Set the Audio Hardware for Built-in Output.
   Set the Audio Output Mapping for Built-in Output.
   Set the Playback for Audio Device on the KONA audio.
You will likely have to reboot after making any changes.
We are running Kona 3, 3G and I/O 4k systems and this basic setup is needed for all our systems or we have intermittent audio playback issues.

Video output via FW deck

Running on MBP in the field, can I monitor Color video out via FW connected to DVCPro deck then out to NTSC monitor? FCP outputs fine. In Color the video output selection is greyed out... jPo? Shane?
Thanks

Thanks.
That's too bad, it'd be nice to show some options on set with a basic FW interface... wouldn't wanna schlep all that gear around...

Trouble running DVI video and HDMI audio out of 6950

Twin frozr iii 6950 2gb (X2 crossfire)
Asus VG236 Monitor
Windows 7
MSI P67A-G43 Motherboard
Yamaha RX-V371 Receiver
I have two Twin Frozr iii 2gb 6950 cards and am attempting to use the HDMI on the video card solely for 5.1 audio out to my receiver while using video through the DVI jack of the same card directly to my monitor without success.
-Audio functions if I run the HDMI from the card into my receiver, then out to my Asus VG236 monitor.
-Audio functions when I run from the card to my receiver then out to my plasma tv.
-Audio functions if I have the DVI run directly to the Asus VG236 monitor and HDMI to the receiver then plasma tv (only in dual display and the tv must be on for audio to function this way. If I turn the tv off even though the receiver is still on the audio stops working and windows sound lists the 'AMD HDMI Output' as not plugged in).
-Audio even fuctions when I run DVI to the monitor and HDMI to the receiver, then out to the HDMI port on the same monitor but the monitor will only run at 60hz this way even when DVI is selected on the monitor, as though it defaults to the HDMI when dvi and hdmi are both plugged into the monitor.
And if i run the hdmi to the receiver "HDMI IN" port without using the "HDMI OUT" port from the receiver to anything, like my tv or monitor, the sound doesn't work and in windows sound the "AMD HDMI Output" is listed as "not plugged in" .
I purchased this monitor for the true 120hz capabilities, the HDMI on this monitor doesn't support 120hz, the maximum is 60hz. DVI is required to run at 120hz. I don't see any option in windows sound settings or CCC to resolve this.
I have also tried disabling onboard audio in BIOS with no effect.
For now i'm running the audio out my MOBO jack through an optical cable to the receiver but optical only supports 2.1 sound.
Any suggestions you can offer would be appreciated, thank you

bump,
Anybody?

Clips from Project bin to source monitor causing video output to go out of sync(CS6 and CC)

Any footage I double-click or drag from the Project window to the Source monitor causes my video output to go out of sync. When I put the clips in the timeline, video goes back in sync and I'm able to view video output. My monitors are connected to a Blackmagic Intensity Shuttle Thunderbolt(9.7.5) via component and HDMI. Is this normal behavior in Premiere or is there a setting to enable this? No issues doing this in FCP7(clips from Project window to Canvas).
Can someone with an I/O from AJA, Matrox, or Blackmagic please test this out for me. Thanks...
2012 Macbook Pro
MacOS 10.8.3

Hi Joe,
How do you have your audio setup? Try the following.
- Set your OS system sound to Built-in or Line out audio
- Select Blackmagic for both Video and Audio in Preferences> Playback
- Select System Default Input/Output from Preferences> Audio Hardware
Hope this helps,
Peter Garaway
Adobe
Premiere Pro

A/V Composite cable video but no audio out

I just bought a new A/V composite Apple cable for my iPhone. I plugged it in to an LCD tv when I got home, and it WORKED with all the videos I have on the iPhone. I then (without unplugging) tried to play a song from the iPhone (purchased from ITMS). No Sound out.
Then I went back and tried to play a video again. Video out, no sound out!
Then I tried several un plugs and replugs, I tried a full shutdown and reboot of the iPhone. All with no effect. Now pictures and video still go out, but no sound out of the cable.
Questions:
1) Does anyone have a solution to this? Cable wasn't stressed or anything-and works with a different iPod Nano.
2) Shouldn't the iphone put out audio through the A/V composite cable using it as an iPod?
3) Although the iPhone asks, when starting a video with the cable plugged in whether you want to play on TV or not, is there any selection that needs to be made to get audio out from song files (just ipod sound out?)
WSKCONDOR

*However, it doesn't explain why after returning to video the TV sound was still not present.*
If you mean you first tried to play an audio only file and then switched to an audio with video then it's most likely the TV was still shut down on that input. Try this (with the previous scenerio): after you're sure the iPhone is outputting both video and audio (with a movie, for example) just switch the TV inputs until you're back to that signal and I'll be it will show things again.
Once again, I think both the iPhone and the TV makers are culpable, but it's a shame the iPhone doesn't output the album art because this is what it does when you play it standalone. It just makes sense -- that fact it doesn't is a kind of "duh" (unless there are technical issues I just don't understand -- possible, even though I'm a programmer). But all of us who want this should go to feedback and post it and perhaps it will make it to the next release (I've asked for this about three times now).

Audio out of synch from video...

After I finish a video and watch Full Screen Playback my audio is always a bit out synch from my video.
I have a MacBook Pro. The clips I import are MOV clips....
Any help anyone smart folk???
Thankee,
Sean

Check to see if the timecode of the current video clips is correct, and matches what's on the tapes. If it does, it should be a simple matter of recapturing the footage with a media managed sequence. Be sure that you're running the latest software on the version that you're using too...
You'll not have to re-edit that way, just recapture and see if things don't clear up. In the process you'll not disturb the current project nor it's media, so it's probably worth a try.
Jerry

MBP- Digital Audio Out is always on

For some reason after (I believe) I updated to 10.4.9 the Digital Audio Out on my MBP is always on, thus making the internal speakers unusable. If I plug in headphones they work fine but after I unplug them it switches back to digital audio.
How do I fix this?
15" MBP 1.83ghz. Mac OS X (10.4.6) 1.5gb of Ram,

ok, since this prob comes up every week and often more than once a week, I wrote a detailed explanation and saved it so I could repost it next time it happened to someone. here it is:
the audio input/output connector on all mac notebooks is a dual function connection. it can switch between analog and digital optical. the way it does this is by an automatic sensor that detects what is plugged in. if it detects that an optical digital cable is connected, then it will switch to digital output and/or input mode as the case may be. this is why you see a red light - it's the optical digital audio stream. it seems that in many cases, people's connectors are becoming stuck, and the machine thinks there is a digital optical cable plugged in. it can happen if you've connected or disconnected headphones, or speakers, or possibly even if something is loose in that port and it just gets jammed with the sensor being tripped. people have suggested trying to gentle poke inside the port with a paperclip, to try and reset the sensor back to the setting that nothing is plugged in. for some people it has worked, for others, not. you can also try plugging in headphones and unplugging them a few times to see if it does the trick. if none of this works, then unfortunately the best bet is going to be taking the machine in for a service.

After Effects rendering the video with the audio out of sync

so, the thing is, i did the animation on flash, exported it, put it on after to edit audio and what not, everything looks fine, previews are good, so, lets render!... every time i render the final video have the audio out of sync, specially the audio that is already on the first video. the video its originally on 12 fps, if i change the interpretation to 24fps, everything get worse. any help?

ok, both Flash and After effect are CS6, i have a Lenovo Ideapad, can handle 64 bits
first i exported the video on .MOV from Flash CS6, without any problems
Then i finished the edition on After Effects, everything look good.
i have tried to render it on MOV, AVI, MP4 and the audio for the video that was exported from flash always get out of sync. i dont really move anything else

Multiple audio outputs - HDMI & Audio out

Hi all,
This is driving me a little nuts, so any help greatly appreciated! With the new Mac Mini models, you can have audio out via HDMI or the line out. I am thinking to hook the mini up to an LCD TV/monitor via HDMI (sound on the monitor) and also to my other TV/sound system via the mini DP and audio out.
I assume when the mini turns on it'll activate both displays (if they are turned on), and from what I understand you can have two displays running. I'd only want one at a time so I'd have the other display switched off. But can the mini output audio to either both, or whichever system I am using? I've read a lot of posts but can't find a definite answer. I only want audio (and video for that matter, but can turn off other screen) to one TV at a time, but do I have to go into the OS audio settings each time I want to swap between the two?
I'm also thinking of using Plex and keeping it open at all times, just sleeping the mini when not in use. Can the mini only output to one source, requiring manual switching to the other (i.e. going from HDMI to audio out)?
Thanks for your help!!

I would consider using a switcher for the video. And use the osx sound output selection to change the audio.

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

Video output from iPod Touch (2nd gen) via AV Component Cable (no audio)

Hi, I'm trying to output a video from my iPod Touch (2nd gen) to my TV via a AV Component Cable.
Unfortunately the audio doesn't work, I'm sure they are all connected into the right places.
The video works, but I get no audio. (And no subtitles when closed caption is on)
Here is a link to an image of the TV connections from ImageShack:
http://img707.imageshack.us/img707/7280/img0204y.jpg
At the top left of the image, are what I assume to be the red and white audio ports, highlighted in red.
I plugged in the red and white audio connectors into those ports.
And towards the bottom are three ports, green, blue and red, also highlighted in red.
I plugged in the green, blue and red connectors into those ports.
I changed the input of the TV to Input 2, I see the video for the movie I'm watching on the TV but no audio. I tried multiple movies.
I've also tried changing the video output from PAL to NTSC and back again, turning Widescreen on and off and turning Closed Captions on and off. I also tried plugging in the red and white audio connectors into the row of ports just below the green/blue/red row, to see if that made any difference, and it didn't.
I tapped the bottom left button of the iPod Touch when plugged in to the TV and playing video and it came up with an option that was selected called ~"Audio Source: English (Stereo)"
Any idea's? Thanks.

Resolved... ThankYou

Why is audio out-of-synch with video on VOB files

I used a Pioneer DVR to import ~120 8mm and Hi8mm and Digital8 analog tapes to convert them to DVD's. These ~120 DVD's are in VOB format. These are 4:3 video (not HD). I did test this flow and didn't notice a few of the VOB's did not have the audio tracking properly.
When importing them into Premiere Elements 8.01 some of the VOB files have their audio out of synch with the video, yet, they play okay in the Premiere preview window.
Is there a setting so that when it 'conforms', that it will track the audio correctly?
Do I need to buy a conversion tool to go from VOB to mpeg-2 (or other format?) and then import to Premiere Elements 8?
Is there a better video editing tool to use?
I simply want to take all these 8mm tapes / DVD's to splice the best scenes.
I am running Windows 7 Ultimate 64-bit AMD Athlon II X4 630 2.8GHz processor, 4GB of DDR3 memory; and installed an ATI HD-4350 pcie gen2 graphics card. I have a memorex bluray dvd player.
Thanks, SJK.

I have NOT used those products, I only forward due to other mentions
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
$99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
$99 http://www.womble.com/products/mvw.html
$80 http://www.nchsoftware.com/prism/index.html
$75 http://www.videoredo.com/en/index.htm
$75 http://www.magix.com/us/movie-edit-pro/
$70 http://www.nchsoftware.com/prism/index.html Converter
$40 http://www.daniusoft.com/dvd-ripper.html#135
$40 http://www.deskshare.com/dmc.aspx Digital Media Converter
$00 http://www.squared5.com/ Converter
$00 http://www.erightsoft.com/SUPER.html Converter
$00 http://www.virtualdub.org/ Converter

Vado audio out of synch with video when I transfer it out of Vado Central

Vado audio out of synch with video when I transfer it out of Vado Centralk I have a very important video I took that runs fine in Vado Central. However, when I try transferring it anywhere else (Facebook, Photobucket, iMovie) the audio speeds up and makes my son sound like a chipmunk.
My computer is a MacBook OS 0.5.8, 2.4 GHz Intel Core 2 processor, 2GB memory, which should meet the system requirements.
I've been going back and forth with customer-no-service and their last suggestion was that there's nothing wrong with the camera or Vado Central and that Facebook, Photobucket and iMovie must all be independently having the exact same problem
I'm very frustrated and unhappy. This camera is only 2 months old, but it's too late for me to return it and right now it's worthless to me. Worst of all, my very important video is ruined. Anybody have any suggestions

Yes, it sounds the same (too fast) no matter what computer we try it from. I've tried burning a DVD every way I can think of and when we try to play it on our DVD player we still have chipmunk audio.
I am BEYOND frustrated with Vado's customer-no-service. They keep insisting that since it will play in Vado Central I don't have a problem. I bought this camera so that I could share video with my family that's across the country. What am I supposed to do now, mail them the camera?! It's absurd!

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s Solutions?

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s. Any ideas?

Question: Is all the source footage shot in 16 bit audio or is some also shot in 12 bit?
http://docs.info.apple.com/article.html?artnum=42973
http://www.kenstone.net/fcphomepage/idvd_6stone.html
http://docs.info.apple.com/article.html?artnum=93006
http://docs.info.apple.com/article.html?artnum=303550
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
http://docs.info.apple.com/article.html?artnum=61636
http://docs.info.apple.com/article.html?artnum=302925

Video Output ALWAYS dictates Audio Out!!??

Similar Messages

Maybe you are looking for