View logs of the segment builder

Hi,
Does anyone knows how to see in detail the logs generated in the segment builder.
Thanks,
TPT

Gregor, thank you very much for your response...
I still have one more question... If with this functionality I can specify if my attributs will be concatenated as "and" or "or".... Why do I need the function "Merge" or "Split"?
When using the buttons mentioned before, it is not so clear to visualise under which premise the attributes are being concancatenated.
I also have one more question...what is the difference between a profile that has not been built and one that has. For example, I know that one can assign to a campaign a profile that has not been built.
Best regards,
Nuno

Similar Messages

  • Will Materialized view log reduces the performance of DML statements on the master table

    Hi all,
    I need to refresh a on demand fast refresh Materialized view in Oracle 11GR2. For this purpose I created a Materialized view log on the table (Non partitioned) in which records will be inserted @ rate of 5000/day as follows.
    CREATE MATERIALIZED VIEW LOG ON NOTES NOLOGGING WITH PRIMARY KEY INCLUDING NEW VALUES;
    This table already has 20L records and adding this Mview log will reduce the DML performance on the table ?
    Please guide me on this.

    Having the base table maintain a materialised view log will have an impact on the speed of DML statements - they are doing extra work, which will take extra time. A more sensible question would be to ask whether it will have a significant impact, to which the answer is almost certainly "no".
    5000 records inserted a day is nothing. Adding a view log to the heap really shouldn't cause any trouble at all - but ultimately only your own testing can establish that.

  • Short dump when opening the segment builder

    After the upgrade from CRM 4.0 to 2007, we are no longer able to open the Segment Builder. We always get a short dump (Message_type_X). Anyone encountered this problem before and has a solution?
    Thanx in advance!

    Hi,
    though it is true that in CRM 2007 the GUI transactions should not be used anymore I am able to start the segment builder directly via transactioin CRMD_MKTSEG. It is working without a shortdump.
    For documentation I suppose you have to refer to SAP: Help or the documentation available under service.sap.com. The blog posted here might be an alternative as well.
    cheers Carsten

  • How to check the number of contacts with segment level 'food and beverage' in the segment builder?

    How to check the number of contacts with segment level 'food and beverage' in the segment builder?
    Do we have any table to check this.

    How to check the number of contacts with segment level 'food and beverage' in the segment builder?
    Do we have any table to check this.

  • Creating a Materialized View Log After the Data has been instered

    Hi,
    I am trying to create a method of replication from Oracle to MySQL using the Materialized View Log table.
    This has been done before and works quite well, the only problem is that I am trying to impliment the log after the table has been created and populated and wish to push all the existing data through the log file...
    Does anyone know if it is possible to refresh the Materialized View Log and not a Materialized View.
    The way the replication is intended to work is:
    Oracle> Data inserted into table
    Oracle> writes the vector data to the MVL
    Script> Monitors the MVL and can see the changes being made to the Oracle Table
    Script> Updates MySQL with the data and removes the rows from the MVL
    MySQL is then used with other unix systems
    Currently we export the data from the table using Triggers and a cronjob running every x minute to check for changes in the TriggerTables
    Many thanks for your time on this, I have been checking for almost a whole working day and not found the answer to this problem.

    Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
    From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
    I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
    Many thanks for your help.

  • How to view log of the exception occured in an application

    Hi All,
    While running the webdynpro application in the portal currently we are displaying some generic error messages in the catch block to make it user friendly.
    If some exception occurs, how is it possible for the user to view the error log in the portal itself so that the user may get a clear and detailed description of the same.
    Kindly suggest a solution for this.
    Thanks,
    Mitali

    Hi Mitali,
    To view the logs use the url http://<host>:<port>/nwa > Monitoring
    OR
    can look up the exception ID by doing the following.
    1. Navigate to System Administration->Support->Portal Runtime->Log Viewer
    2. Enter the exception id in the Search box and click on search in all files.
    3. It should popup a new window with your error message.
    OR
    all of your portal logs will go to defaultTrace.trc which is located under cluster/server0/log
    You can still watch this file through the portal log viewer.
    OR
    It it does not work for changes in the log viewing
    See the following:
    http://help.sap.com/saphelp_nw04/helpdata/en/ba/0aa94076b63713e10000000a155106/frameset.htm
    Reagrds.
    Rajat

  • Error while viewing log in the portal

    Hi,
    When i try to access the log files in the portal, i get this error.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : com.sap.portal.logviewer620.logviewer
    Component Name : com.sap.portal.logviewer620.logviewer
    The exception was logged. Inform your system administrator..
    Exception id: 04:31_12/05/06_0030_4049850
    See the details for the exception ID in the log file
    Any clues as what the problem must be. Please do let me know.
    Regards,
    Akash

    Hi James,
    This component is not available in EP7. To view the logs use the url http://<host>:<port>/nwa > Monitoring.
    Cheers!!

  • How to view Log on the cisco 2821 Router

    Hi,
    can any one help me  to view the Log on the Cisco 2821 router for any  issue occur.
    Thanks,
    Saroj

    Cisco devices use the syslog to manage system logs and alerts. But in Cisco devices there is lack of large internal storage space for storing these kinds of logs.So to overcome Cisco devices has the following two options:
    1) internanal buffer — That is a small part of memory buffers to collect log the most recent messages. The buffer size is limited and , when the device reboots, these syslog messages are lost.by default it is on
    (If not follow this steps
    conf t
    logging on
    logging console.....console logs
    logging buffer  size ......set the size of buffer
    terminal monitor.......to gets logs on the remote terminal like telnet,ssh etc.
    sh logging.........to see buffer logs.)
    2) Syslog server—  By using this we can send messages to an external device for storing this logs and the storage size does depend on the available disk space of the external syslog server. This option is not enabled by default.
    If you have any syslog server please find the below simple config .
    conf t
    logging host x.x.x.x
    logging traps (i.e 0 1 2 3 4 5 .. according to your requirement)
    before enabling logging be sure that your router is properly configure to collect proper time from any NTP server or manually configure to get time
    command to set time manually on router is (set clock ) or to use ntp server use ntp server x.x.x.x to sync clock to router router.
    Hop thant is informative ,
    Regards,
    Ashish

  • Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder

    Objective: Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder.
    Problems: Standard CRM_MKTTG_BP_BIRTHDATE Infoset DOES NEVER RETURN ANY RESULTS on the segmentation builder of the WebUI client (no matter the filter you specify).
    Other cases:  However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (using the same filters as in the segmentation builder)! Of course the segmentation builder works with other attribute lists.
    NEW: IF WE DON’T ESPECIFY ANY SEGMENTATION BASE IN THE PROFILE GROUP, IT DOES RETURN RESULTS!!! (GO TO THE END OF THE DOCUMENT FOR DETAILS)
    Steps followed:
    Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE (Transaction SQ02).Review Data Reading Program code: do we have to change the standard code? We have only remove the "BREAK-POINT" statement.
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset (Transaction CRMD_MKTDS).
    Creation of an Attribute List based on that standard Data source and selection the Birth date as a filter in the Attribute list (Transaction CRMD_MKTDS).
    On the segment builder of the WebUI set any filter (Example: “TODAY”).
    Steps in detail:
    Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE
    SQ02.
    (Image deleted)
    Review Data Reading Program code (Code attached)
    (Image deleted)
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
    Data source: Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation - Maintain Data Sources and Attribute Lists: CRMD_MKTDS
    Create Data Source
    (Image deleted)
    Infoset: CRM_MKTTG_BP_BIRTHDATE.
    Business Partner Field: CRMT_MKTTG_IS_BIRTHDATE-PARTNER_GUID
    (Image deleted)
    Result:
    (Image deleted)
    Attribute List
    Creation of the Attribute List
    (Image deleted)
    Assign Data Source:
    (Image deleted)
    Selection of the Birth date as a filter in the Attribute list:
    (Image deleted)
    Result:
    (Image deleted)
    Segment builder of the WebUI:
    Access to WebUI with marketing role.
    Create Segment:
    Creation of Profile Set
    Graphical modeler
    Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
    Example1: “today”
    Count target group. Here I would like to stand out that once you click on the “Count” option, immediately it shows 0 results. In other words, it doesn’t process any information. With other attribute lists it takes some time to process, no matter the filter or the attribute list you use. However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (with “today” filter and other)! So it seems that the problem has to do with the segment builder, not the Infoset.
    Result: it never return any results no matter the filter you specify.
    Other cases:
    Creation of a new Data source with data "Extraction from Query" where you enter the name of your new query
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
    Standard Infoset CRM_MKTTG_BP_BIRTHDATE:
    We fill the form and select “Extraction from Query”:
    Press SAVE and define which fields will be available for selection and which of them will be visible.
    RSA3: Extractor checker in order to test the Data source:
    We specify the Data source:
    IT DOES RETURN RESULTS:
    ALV Grid:
    NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados.
    Segment builder – Profile Set of the WebUISegmentation Basis: we leave it in blanc.
    Graphical modeler
    Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
    Example1: “today”
    Count target group.
    Result: IT DOES RETURN RESULTS!!! àConclusion: the problem is the Segmentation Basis
    Define Segmentation Basis:
    Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Segmentation Basis.BS Usuarios Registrados:
    Define Reports for Creating Segmentation Bases
    Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Reports for Creating Segmentation BasesZMK_UTL_MGR_SITES_UREG
    Define Usage for Segments:
    Transacción: SPRO – Customer Relationship Management - Marketing – Segmentation – General Settings - Define Usage for Segments.ZBS_UR à02 Segmentatión Basis
    Attribute List:Category:
    There is no Category 02 Segmentatión Basis!!! Why?? Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???
    Usage ID
    NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados. Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???

    It seems that the standard Infoset doesn’t work by itself with Segmentation Basis. Two SAP notes have been applied and a new Field Group has been added to the Infoset (in order to distint the Segmentation Base).
    CRMT_MKTTG_IS_BIRTHDATE-MGRGUID
    1966298: MGR_GUID is not populated correctly to infoset read program
    2007687:Segmentation InfoSet queries saved with incorrect Master Group
    For that reason we had to create a new Infoset based on the standard CRMT_MKTTG_IS_BIRTHDATE, but adding this new Field MGRGUID to the Group Fields.
    Issue solved

  • Whats the purpose of materialized view log?whats create view log with rowi

    Why we create materialized view log ?????whats the use???
    what do you mean by "create view log with rowid"
    Regards
    Gagan

    A materialized view log stores the change vectors made to a particular table in order to allow materialized views that reference that table to be incrementally refreshed rather than re-materializing the data every time. It's a much more efficient way to refresh a materialized view.
    WITH ROWID specifies that the materialized view log should store the ROWID of a row with the change vector, which is one way of identifying which row(s) in the materialized view should be updated by which change vector. You can also use the primary key value for this.
    Justin

  • How to CREATE MATERIALIZED VIEW LOG (MV fast refresh) with some JOINS

    Hi @ all,
    i'm trying to create a MATERIALIZED VIEW LOG for a fast refresh of a MATERIALIZED VIEW.
    It works fine with a simple Request in the MATERIALIZED VIEW:
    CREATE MATERIALIZED VIEW MV_ZOTD43_P
    TABLESPACE GDII
    BUILD IMMEDIATE
    REFRESH FORCE AS
    SELECT * FROM ZOTD43_P;
    COMMIT;
    CREATE MATERIALIZED VIEW LOG ON ZOTD43_P
    TABLESPACE "GDII"
    WITH PRIMARY KEY, ROWID, SEQUENCE INCLUDING NEW VALUES;
    call DBMS_MVIEW.REFRESH('MV_ZOTD43_P', 'f');
    But when I use a complex SQL-Request with some JOINS (one of the Table with spatial Data) in the MATERIALIZED VIEW, I get an error:
    CREATE MATERIALIZED VIEW MV_TEST
    TABLESPACE GDII
    BUILD IMMEDIATE
    REFRESH FORCE AS
    SELECT lptd04_p.sst_nr AS sst_nr,
    lptd03_p.aaaa AS aaaa,
    lptd04_geom.geom as geom
    FROM lptd04_p lptd04_p
    JOIN lptd01_p lptd01_p ON lptd01_p.cre_nr = lptd04_p.sst_nr
    JOIN lptd04_geom ON lptd04_geom.sst_nr = lptd04_p.sst_nr
    JOIN lptd03_p lptd03_p ON lptd03_p.lief_nr = lptd04_p.lief_nr;
    COMMIT;
    CREATE MATERIALIZED VIEW LOG ON LPTD04_P
    TABLESPACE "GDII"
    WITH PRIMARY KEY, ROWID, SEQUENCE INCLUDING NEW VALUES;
    call DBMS_MVIEW.REFRESH('MV_TEST', 'f');
    Error report:
    SQL Error: ORA-12004: REFRESH FAST kann für Materialized View "GDI"."MV_GDI_SST_STAMM" nicht benutzt werden
    ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 2255
    ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 2461
    ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 2430
    ORA-06512: in Zeile 1
    12004. 00000 - "REFRESH FAST cannot be used for materialized view \"%s\".\"%s\""
    *Cause:    The materialized view log does not exist or cannot be used. PCT
    refresh is also not enabled on the materialized view
    *Action:   Use just REFRESH, which will reinstantiate the entire table.
    If a materialized view log exists and the form of the materialized
    view allows the use of a materialized view log or PCT refresh is
    possible after a given set of changes, REFRESH FAST will
    be available starting the next time the materialized view is
    refreshed.
    Am I doing something wrong or is it not possible CREATE MATERIALIZED VIEW LOG when the MATERIALIZED VIEW got some JOINS?
    Regards,
    Greq

    Thanks for the link Alessandro ,
    the error seems something to do with the Column-Type SDO_GEOMETRY, so
    i create a new thread in the Spatial Discussion forum:
    FAST REFRESHing of Oracle Materialized Views containing SDO_GEOMETRY column
    Regards,
    Greq

  • Segment builder does not start in CRM 7

    Hello!
    I'm trying to get the segment builder in the marketing scenario to work in CRM 7
    It starts a java-applet, but I'm pretty sure it is suppose to start a flash variant instead....
    We have barely any rights/privileges in Windows, could that cause the problem?
    The java version on the PC's is 1.6.0_07-b06
    I get no error messages in the logs in CRM.
    I haven't found any good docs related to segment builder and if somebody has some good docs, pls let mer know where they are available!
    Thanks and regards!
    rollo

    Hi Rollo!
    Try the following steps:
    1. Download the latest update at www.java.com
    2. Check if the following services are activated:
    - /default_host/sap/public/bc/icons
    - /default_host/sap/public/bc/ur
    - /default_host/sap/public/bsp/sap/system
    - /default_host/sap/bc/bsp/sap/crm_ui_start
    - /default_host/sap/bc/bsp/sap/crm_ui_frame
    - /default_host/sap/bc/bsp/sap/crm_bsp_frame
    - /default_host/sap/bc/bsp/sap/gsbirp
    - /default_host/sap/bc/bsp/sap/thtmlb_scripts
    - /default_host/sap/bc/bsp/sap/thtmlb_styles
    - /default_host/sap/bc/bsp/sap/crm_thtmlb_util
    - /default_host/sap/bc/bsp/sap/bspwd_basics
    - /default_host/sap/bc/bsp/sap/bsp_wd_base
    - /default_host/sap/bc/bsp/sap/crmcmp_hdr
    - /default_host/sap/bc/bsp/sap/crmcmp_hdr_std
    - /default_host/sap/bc/bsp/sap/uicmp_ltx
    - /default_host/sap/bc/bsp/sap/bsp_dlc_frcmp
    - All Services unter /default_host/sap/crm
    4. Transaction /nSICF
        Activate the following service
        /default_host/sap/bc/bsp/sap/crm_mkttg_segap
    I think, that will work.
    Regards
    Oliver

  • Query on Materialized View Logs

    We need a denormalised data step-up, we decided on implementing Materialized Views and started working on them. I have created Materialized View log on a table using below mentioned syntax
    CREATE MATERIALIZED VIEW LOG ON <table_name> WITH ROWID
    I have tested it and its working fine.A Strange error I am facing is, after an hour or so the materialised view gets corrupted and applicatin users gets an error saying error with the materialised view log.
    The log entry in the data dictionary gets deleted. Later I have to execute DROP on the log to completely remove it.
    I am confused how this can happen.

    What is the refresh method set as?
    Could you paste the full MV log creation script and the corresponding MV creation script.

  • Reg  ora-12034 materialized view log on younger than last refresh

    Hi,
    when i update my base table materialized view log shows the updated rows
    but when i refresh materialized view it wont show updated rows in materialized view and also there is no rows in materialzed log
    it shows error ora-12034: materialized view log on younger than last refresh
    cheers,

    FIX
    A complete refresh is required before the next fast refresh.
    Please run the process "Refresh Materialized Views"

  • Set background image in the Interface builder

    Hi,
    Is there a way to set a background image for a View controller through the Interface builder? I'm using story boards.
    If not please tell me how to do that programatically. I need to set this background image for all my UIs.
    Thanks

    Remember that the client is running from a browser. You need to have the file be available to the browser and that means having it be served by the web server. Place the image file in a directory available to the web server and map that directory to a virtual web server directory and specify it with a url relative to the web server root: /images/your_image.gif

Maybe you are looking for