View my message site log in problems
I tried to log into a picture today and its telling me user name and password is invalid. I did it like 100 times and its not invalid but I cant log in. Anyone else have this problem or know what the deal is? Thanks
If they enter you e-mail address instead of phone number, then you don't have to deal with viewmymessage.
No they do not nee internet or e-mail on their phone for this.
Similar Messages
-
i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?
Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD. -
Unable to see custom Trace messages in Log Viewer which were defined in UDF
Hello Experts, I am not able to see my trace messages in Log Viewer. I have a small user defined fuction which takes a variable and returns its uppercase and while do that it writes few warning level trace messages in the trace file. I've tried changing the levels from Warning to Info but I still don't see anything in my Log Viewer. At this point I am not even sure if I am looking at right place. When I test my mapping in Message Mapping's Test tab it works fine and shows me all my trace messages. But when I do end to end it is not writing anything to the trace file. I've tried to use instructions from following blogs:
1. /people/michal.krawczyk2/blog/2007/04/30/xipi-personalized-logging-tracing(logging and tracing)
2. /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni (logging and tracing)
3. /people/michal.krawczyk2/blog/2005/02/25/simple-java-code-in-graphical-mapping--xi(for my UDF)
but I still don't see traces in my Log Viewer. Please let me know if I am doing anything wrong here.
Thanks in advance!!
==============================================================
public String TraceVar(String var1, Container container) throws StreamTransformationException{
AbstractTrace importanttrace; //create an instace of AbstractTrace
importanttrace = container.getTrace(); //get trace
importanttrace.addWarning("FiletoFileMP:MyUdflibrary: " + var1); //write first message to the trace
// fix the naming conventions later
String SenderName; // declare multiple vars to store infos
String ReceiverName;
String interface_name;
String message_ID;
String time_Sent;
java.util.Map map;
map = container.getTransformationParameters();
//get interface info into the variables
time_Sent = (String) map.get(StreamTransformationConstants.TIME_SENT);
message_ID = (String) map.get(StreamTransformationConstants.MESSAGE_ID);
interface_name = (String) map.get(StreamTransformationConstants.INTERFACE);
SenderName = (String) map.get(StreamTransformationConstants.SENDER_NAME);
ReceiverName = (String) map.get(StreamTransformationConstants.RECEIVER_NAME);
//post interface info to the trace
importanttrace.addWarning("Time Sent: " + time_Sent);
importanttrace.addWarning("Message ID: " + message_ID);
importanttrace.addWarning("Interface Name: " + interface_name);
importanttrace.addWarning("Sender Name: " + SenderName);
importanttrace.addWarning("Receiver Name: " + ReceiverName);
//convert var1 to uppercase to make sure this function has be executed
return var1.toUpperCase();
Edited by: Mayur Patel on May 5, 2009 11:03 PMThank you Prateek for a quick response.
Yes I was able to see my trace messages in SXMB_MONI. Below is my the info... This is great. I am still not sure why this info is not showing up in Log Veiwer's (default trace) window. Any ideas? Since this XML file contains lots of other information I was wondering how to put my trace messages into the log viewer.
Thanks!!
<Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="2" type="T">FiletoFileMP:MyUdfLibrary: Honda</Trace>
<Trace level="1" type="T">FiletoFileMP:MyUdfLibrary: Honda</Trace>
<Trace level="1" type="T">Time Sent: 2009-05-05T16:16:39Z</Trace>
<Trace level="1" type="T">Message ID: 366CEAF14D3B410033AFDDB71CD2AF73</Trace>
<Trace level="1" type="T">Interface Name: SIC_Car_Outbound</Trace>
<Trace level="1" type="T">Sender Name: SIC_Car_Outbound</Trace>
<Trace level="1" type="T">Receiver Name: SI_Car_Inbound</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace> -
Hello.
I have a problem with OEL 6.5 and ocfs2.
When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
fstab:
UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
#UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
#UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0What is the output of:
# chkconfig --list o2cb
# chkconfig --list ocfs2
# cat /etc/ocfs2/cluster.conf -
A message cannot be seen on my incoming emails. I can only view the message if I click on reply. Also any links attached to email will not open. I have tried everything to solve the problem but not able to.
Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!
I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.
-
I am in Thailand and have True internet is this why I can't use Face time. I get the message I have network problems when I log in.
Is the Face Time Service avabial in Thailand?
-
I'm trying to submit an event to the events calendar at http://calendar.jtnews.net/events/index.php?com=submit. After I enter the Authentication words and press Enter, I get the message, "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." According to my Firefox/Tools, etc., button, Javascript is enabled. I
Hello mjswooosh,
I'm very disheartened to hear that you've had ongoing problems when attempting to order from BestBuy.com. Our goal is ever to provide a fun and efficient shopping environment! Certainly creating aggravation serves neither you nor us and I apologize sincerely for this having been your experience.
We recommend the troubleshooting steps you mentioned (i.e., clearing the browser cache, deleting temporary internet files and cookies) because this is the most common cause of this type of problem. I too have encountered this issue from time to time and these steps have almost always resolved the problem. I say almost always because there's one further step you can try: ensure that you have signed out of BestBuy.com, then perform the browser maintenance steps we've recommended. Afterward, before signing in to BestBuy.com, add your desired items to your cart and sign in as part of the checkout process. When the standard steps have not netted a resolution for me, this has solved the problem each time.
I hope this helps. I'm very grateful that you took the time to write to us with your concerns and for sharing your very valuable feedback about your online experience.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message -
Error message: there is a problem with adobe acrobat reader. if it is running please exit and try a
error message: there is a problem with adobe acrobat reader. if it is running please exit and try again (0:104) How can I fix this?
Hi Claudio, Thanks for your assistance. I'm still confused. When I click on this site it tells me: To view this FTP site in Windows Explorer, CLICK PAGE, and then click Open FTP Site in Windows Explorer. I do not see "Page" on this list. There is a "pace"... though.
-
Please let me know if anyone knows an answer to this one... We're in a Hybrid Exchange environment, with 2 x Exchange 2007 servers, and 1 x Exchange 2013 Hybrid server which is pointing to Office 365 for the purposes of relaying mail to O365 while
we migrate our users out there.
We have just finished migrating, but just a couple of days ago we started experiencing delays in email delivery to O365... Not all mail, but some! Incoming email or locally generated email gets relayed out through the Hybrid server and out to O365,
but not all email is delayed... only some, but it's constant. During the busiest part of the day, about 200 messages are sitting in the Queue in Exch2013... but they all eventually resolve between 5 and 45minutes. The users are not happy.
The last error in the queue viewer for each hung email reads: 451 4.4.0 Temporary server error. Please try again later.
If I look at the message tracking logs, I find an interesting item -- "RecipientThreadLimitExceeded":
2014-05-15T14:15:51.608Z,192.168.3.11,hydra,207.46.163.215,company-mail-onmicrosoft-com.mail.protection.outlook.com,RecipientThreadLimitExceeded,Outbound to Office 365,SMTP,DEFER,10307921510617,<[email protected]>,885ea3ce-a020-41b1-8950-08d13e58d6d3,[email protected],451
4.4.0 Temporary server error. Please try again later,10117,1,,,Read: This is your generic subject line,[email protected],[email protected],2014-05-15T14:16:51.608Z,Undefined,,,,S:Microsoft.Exchange.Transport.MailRecipient.RequiredTlsAuthLevel=Opportunistic;S:Microsoft.Exchange.Transport.MailRecipient.EffectiveTlsAuthLevel=EncryptionOnly;S:DeliveryPriority=Normal
I have tried to find some documentation on resolution for this RecipientThreadLimitExceeded error, but I can only come up with some Exchange 2011 documentation which recommends adding some entries to the EdgeTransport.exe.config file to bump up the RecipientThreadLimit
value... I have not found anything pertaining to 2013. I cannot even find any powershell commands to see what the current RecipientThreadLimit is on 2013! Aghg!
Has anyone seen this before, or have any recommendations?
Thank you,
MikeAfter many days of frustration, Microsoft Support finally resolved this issue. Believe it or not, but the issue was actually on the Office365 side. Here's the fix:
Exchange Admin Center -> Mail Flow -> Connectors -> Inbound Connectors
Open your "Inbound from <guid>" with the "On-premises" connector type
Click on Scope -> scroll down to "Associated accepted domains"
We had an entry in there "<organization>.mail.onmicrosoft.com"... Microsoft support had us remove this entry so that the box was completely empty.
That RESOLVED it... amazing what what little entry could do. We've had this entry in there for about 2 months, and it had been working fine. Support acknowledged that several customers have had this issue, that they are working on getting it
fixed on the back-end.
Hope this helps somebody...
-Mike -
Please let me know if anyone knows an answer to this one... We're in a Hybrid Exchange environment, with 2 x Exchange 2007 servers, and 1 x Exchange 2013 Hybrid server which is pointing to Office 365 for the purposes of relaying mail to O365 while we
migrate our users out there.
We have just finished migrating, but just a couple of days ago we started experiencing delays in email delivery to O365... Not all mail, but some! Incoming email or locally generated email gets relayed out through the Hybrid server and out to O365, but
not all email is delayed... only some, but it's constant. During the busiest part of the day, about 200 messages are sitting in the Queue in Exch2013... but they all eventually resolve between 5 and 45minutes. The users are not happy.
The last error in the queue viewer for each hung email reads: 451 4.4.0 Temporary server error. Please try again later.
If I look at the message tracking logs, I find an interesting item -- "RecipientThreadLimitExceeded":
2014-05-15T14:15:51.608Z,192.168.3.11,hydra,207.46.163.215,company-mail-onmicrosoft-com.mail.protection.outlook.com,RecipientThreadLimitExceeded,Outbound
to Office 365,SMTP,DEFER,10307921510617,<[email protected]>,885ea3ce-a020-41b1-8950-08d13e58d6d3,[email protected],451
4.4.0 Temporary server error. Please try again later,10117,1,,,Read: This is your generic subject line,[email protected],[email protected],2014-05-15T14:16:51.608Z,Undefined,,,,S:Microsoft.Exchange.Transport.MailRecipient.RequiredTlsAuthLevel=Opportunistic;S:Microsoft.Exchange.Transport.MailRecipient.EffectiveTlsAuthLevel=EncryptionOnly;S:DeliveryPriority=Normal
I have tried to find some documentation on resolution for this RecipientThreadLimitExceeded error, but I can only come up with some Exchange 2011 documentation which recommends adding some entries to the EdgeTransport.exe.config file to bump up the RecipientThreadLimit
value... I have not found anything pertaining to 2013. I cannot even find any powershell commands to see what the current RecipientThreadLimit is on 2013! Aghg!
Has anyone seen this before, or have any recommendations?
Thank you,
MikeAfter many days of frustration, Microsoft Support finally resolved this issue. Believe it or not, but the issue was actually on the Office365 side. Here's the fix:
Exchange Admin Center -> Mail Flow -> Connectors -> Inbound Connectors
Open your "Inbound from <guid>" with the "On-premises" connector type
Click on Scope -> scroll down to "Associated accepted domains"
We had an entry in there "<organization>.mail.onmicrosoft.com"... Microsoft support had us remove this entry so that the box was completely empty.
That RESOLVED it... amazing what what little entry could do. We've had this entry in there for about 2 months, and it had been working fine. Support acknowledged that several customers have had this issue, that they are working on getting it fixed
on the back-end.
Hope this helps somebody...
-Mike -
i accidentally tapped my iPhone 6 and everything got huge on my screen. now i can't even log onto my phone because everything is so big on the screen. how do i get it back to normal view, so i can log on?
i googled for answer to resolve the zoom problem. all the anwers just told you to read links but didn't tell how to fix the screem back to normal then it can be able to go to Setting to fix the zoom funciton. HOWEVER, I accidentally found the solution myself by using a fingers or more
to draw circles clockwise on the screen....it will reset it normally. I spent hours trying to go diagonally, compressively still didn't work. -
I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I accidentally removed the Bonjour service from my system a few weeks ago, but my iTunes continued to work. Now I have no iTunes and I don't know how to fix it. SOMEONE PLEASE HELP!!!!
a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
(i'm not on windows, so i can't test...)
good luck!
j.
Correct Answer by Peter Lepere on Oct 14, 2011 3:07 AM
Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
Mail unexpectedly quits when viewing a message
Hi,
I have 5 e-mail accounts set up - 3 gmail using pop forwarding and 2 other pop accounts. When I load Mail, it can fetch mail from all accounts without a problem. However, double clicking to view any message, from any of the accounts, will crash Mail. It opens the window in which the e-mail should appear and then crashes about 5s later.
I have tried:
Removing the cache <account name>/Library/Caches/com.apple.Mail - no effect.
Removing the plist <account name>/Library/Preferences/com.apple.mail.plist - no effect. At this setting up one account (because removing plist removes the account setting) and trying to view an e-mail still crashes Mail.
Safe boot (<shift> on restart) - no effect.
Removing all FW and USB devices - no effect.
Removing all preferences by dragging the Preferences folder to desktop from <account name>/Library/ - no effect. This means that no prefs including startup apps and dock are run, and I needed to setup one account in Mail to test. Trying to view the e-mail still crashed Mail.
The one thing that does work is setting up a new account (I called mine test) and setting up the pop account in that. It picked up 30 messages and I can view each one. If that works, I don't understand what settings I'm missing in my account that could be causing the problem.
What do you recommend I try next?
Thanks,
Tris.Okay, all sorted after a call to Apple Technical support.
Issue - Mail crashed when trying to view a message.
This happened after setting up one account, so the number of accounts I had was not a problem.
The crash message showed the error:
Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'trying to set a non-ToDo MailboxUid for a ToDo. The MailboxUid for a ToDo must be a ToDosMailboxUid'
I presume that this error is related to the way that iCal's to do list items and Mail link up. The wrong sort of object is being created. Mail doesn't like this and exits.
To solve:
1) Backup your iCal data with iCal File > Backup first. If anything goes wrong in the next steps you can use iCal File > Restore to restore your iCal data to it's current state.
2) Delete all the to do items. Mail then worked fine for me. Check this is the case after a restart.
* At this point, restoring with iCal File > Restore > yourBackupFileName.icbu will re-introduce the problem. *
3) You can backup and reimport your iCal to do lists using .ics files instead. One way to do that is to:
a) select one calendar from the calendar list, selecting all the to dos (select item top of list and <shift> click item at bottom of list) and drag this selection to the desktop.
b) Rename the item including the calendar name e.g. To Do Items Home.ics.
c) Repeat a & b for each calendar's to do lists.
d) Check the name of the calendar you want to import into, on the calendar list.
e) Drag the "To Do Items CalName.ics"; file, for that calendar, to the to do list.
f) Repeat d & e for each calendar.
I think this must be to do with restoring an iCal .icbu file from a Tiger version of iCal, which is where my original came from. Therefore, by importing the to do lists with .ics files, your to do list exists in "Leopard iCal" format which doesn't cause problems with Mail. I'll file this as a bug report and workaround.
HTH
Tris. -
Can't View text Message on PC suite 6.86.9.0
Phone: N82
OS: Windows XP Media Edition SP2
Connectivity: USB with CA-101 Cable
i'm been using PC suite 6.85.14 from past 3 months.. everything works fine, recently new update to ver 6.86.9.0.
i start having problem reading & Send text message from PC suite. the rest just working fine. i can backup, view contacts, sync calendar & contacts.
i was thought it was because the new version might have some bug, i uninstalled this new version, cable driver, pc connectivity solution and install back ver 6.85.14.
same thing happen with error message "unable to read text message from phone", when i press new sms button, on top showing "Text message editor - no phone connected" but it is connected. i can do other things..
anyone know what is the problem??16-Apr-2008 04:36 PM
cheey wrote:
Phone: N82
OS: Windows XP Media Edition SP2
Connectivity: USB with CA-101 Cable
i'm been using PC suite 6.85.14 from past 3 months.. everything works fine, recently new update to ver 6.86.9.0.
i start having problem reading & Send text message from PC suite. the rest just working fine. i can backup, view contacts, sync calendar & contacts.
i was thought it was because the new version might have some bug, i uninstalled this new version, cable driver, pc connectivity solution and install back ver 6.85.14.
same thing happen with error message "unable to read text message from phone", when i press new sms button, on top showing "Text message editor - no phone connected" but it is connected. i can do other things..
anyone know what is the problem??
Try to do these steps mentioned here /discussions/board/message?board.id=pcsuite&view=by_date_ascending&message.id=25290#M25290
and report back on the results please.
mjboia
Maybe you are looking for
-
I was under the impression that, while getting data from database table 'for all entries' always imporves performance. Since we are not getting whole database table data. I was doing a select statement and I have used for all entries. I have only 20,
-
How do i put 'photo library' and photo folders onto my pc?
A while ago I had over 6000 photos in camera, mostly screen shots. So i imported them and sorted them out into photos taken by the camera and screen shots, put them into different folders then put them onto my phone. So i have Camera Roll & Photo Str
-
Hi, Can anybody please urgently tell me whether JVM for Win CE 3.0 for personal PC available. If yes then where can i get more information on this. And if no then please tell me can I write Java Apllications on WinCE 3.0 and using which JVM? Thanx ve
-
Can I know how does the new software upadte affect the keyboard system? Few keys don't work as they used to,in the prebious version,if there is any problem please help me to solve it
-
ORA-20001: Oracle error -20001: ORA-20001: Oracle error -14552: ORA-14552: cannot perform a DDL, commit or rollback inside a query or DML has been detected in fnd_global.set_nls.set_parameter('NLS_LANGUAGE','AMERICAN'). has been detected in fnd_globa