Viewing my data in my numbers worksheets

I'm not sure what switch altered my view of the data on my screen. All of my numbers files no longer show the data on the screen. Every single one of my files. NOt sure if one of my kids changed and option somewhere? HELP!

As you said, it has been overwritten. iCloud doesn't keep a historical archive of the contents.
Only salvation is a backup made by iTunes stored locally in a computer.

Similar Messages

Is there a way to export data from a numbers worksheet to address book

Is there a way to export data from a numbers worksheet to address book

Yes. Address Book provides help for this operation:

I am unable to view the data series button in Numbers\

i notice in the Numbers manual the data series button when a chart is selected but is not accessible to me in the worksheet. please help on how to view the data series button which is the Three iii.

thanks. done. Hopefully someone would respond.

Getting an error while viewing a data in owb

Hi,
I created an External table based on a flat file. But I am not able to view the data in the external table while the flat file has the data.
I am using this external table as a source in my mapping but no data is getting loaded even after the successful execution of the mapping.I am getting the following error while viewing the data
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04040: file ATLAS in ATLAS_LOCATION1 not found
Please help me regarding this. I am new to the owb 11g.

Thanks for you reply. Still I can't view the data. Actually what i did is imported a .csv file using files then created a external table configured , validated and deployed.In next step created a mapping with this excel this using table operator validated and genrated code. In next step using the control center manager i deployed it. But i can't view the data still in the external table.
Is this procedure is correct for loading the excel sheet in to databse. My client environment is on windows xp and database is on linux environment.
Please help me regarding this.I am new to owb.

Can't view my data on my table in EM

Can anyone tell me why I am getting the error below after executing my control file and also why I can't view that data which was loaded.
SQL*Loader: Release 10.2.0.1.0 - Production on Thu Jul 12 16:28:57 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: workattribute2.ctl
Data File: workattribute.dat
Bad File: workattribute.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table WORKATTRIBUTE, loaded from every logical record.
Insert option in effect for this table: APPEND
Column Name Position Len Term Encl Datatype
RESUMEID FIRST * CHARACTER
Terminator string : 'x'09''
WORKID NEXT * CHARACTER
Terminator string : 'x'09''
ID NEXT * CHARACTER
Terminator string : 'x'09''
TYPE NEXT * CHARACTER
Terminator string : 'x'09''
Record 1: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 2: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 3: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 4: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 5: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 6: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 7: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 8: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 9: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 10: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 11: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 12: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 13: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 14: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 15: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 16: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 17: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 18: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 19: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 20: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 21: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 22: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 23: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 24: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 25: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 26: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 27: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 28: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 29: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 30: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 31: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 32: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 33: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 34: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 35: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 36: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 37: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 38: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 39: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 40: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 41: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 42: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 43: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 44: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 45: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 46: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 47: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 48: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 49: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 50: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
Record 51: Rejected - Error on table WORKATTRIBUTE, column RESUMEID.
Field in data file exceeds maximum length
MAXIMUM ERROR COUNT EXCEEDED - Above statistics reflect partial run.
Table WORKATTRIBUTE:
0 Rows successfully loaded.
51 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 66048 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 51
Total logical records rejected: 51
Total logical records discarded: 0
Run began on Thu Jul 12 16:28:57 2007
Run ended on Thu Jul 12 16:29:05 2007
Elapsed time was: 00:00:08.09
CPU time was: 00:00:00.12
thank you in advance

Hi User572297,
This is the wrong forum for a SQL Loader Q, not a bad thing, you just won't get as many responses.
That said, it seems either your terminator string is not present, incorrect or you are simply trying to load to many characters into a column that is too small. For ex: trying to load 50 characters into a Varchar2(40). You get this error for every row, hence you can not see any of the data, becuase none of the rows loaded. See below:
0 Rows successfully loaded.
51 Rows not loaded due to data errors.
What would help is to know the datatype and size of the RESUMEID column AND to see the first lines of your workattribute.dat file.

Can't view changed data in journal data

Hi,
I have implemented JKM Oracle 10g Consistent Logminer on Oracle 10g with the following option.
- Asynchronous_mode : yes
- Auto_configuration : yes
1. Change Data Capture -> Add to CDC, 2.Subscriber->subscribe (sunopsis),
3. Start Journal
The journal has been started correctly wothout errors. The journalized table has always the symbol "green clock". All is gook working.
And then i inserted 1 record in source table, but i can't view changed data in journal data. I can't understand why journal data was generated.
There are no errors.
Help me !!!

Did your designer was on the good context ?
Look the list box at the top right of the Designer interface.
You must have the same as the one where you define your journalization.

Cannot update data in a demantra worksheet..

Hello all,
I am not able to update data in a demantra worksheet - referred to Oracle Metalink
https://metalink.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(bmDocID=459527.1&bmDocType=PROBLEM&viewingMode=1143&bmDocDsrc=KB&bmDocTitle=Worksheet%20Data%20is%20Not%20Being%20Saved%20to%20the%20Database%20-%20Error%20:%20Update%20Data%20Failed,%20Can't%20Create%20%3Cb%3EW...&from=BOOKMARK))
DocId= 459527.1
I have the same error message and I followed the steps exactly but I cannot seem to get rid of the error
Cannot create Wf process. Update Data id: ....
I have the components correctly defined, display units seems ok. Not sure why the Update Data is failing somewhere??
Cheers

Hey there!
Make sure you restart web server (tomcat) after any changes you make in the business modeler, and before checking the worksheets. Make sure component has units associated, and series associated too.
Hope this helps,
Aaron

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

You don't need an application, just plug a compaitble monitor into the display port of your MacBook Pro, set the screen up in System Preferences>Displays

When attempting to view the date track history for one employee, errors out

Hi All
When I attempt to view the date track history for one employee, it gives errors.
To get the details, the navigation is :
1. Search for employee xxxxxx
2. click on Assignment button
3. click on Date Track History.
4. Receive error APP-DT-52554.
5. Click OK on error message
6. click on Full History button.
7. Receive error APP-PAY-06153
What could be the problem and how to solve this?
Regards
Rahman

Sounds as if there is an inconsistency with the date tracked records. Can you check the records through TOAD or SQL Plus?
Have alook at MetaLInk article 343070.1 which refers to the second error message.
Regards
Tim

Not able to view XML data

Hello All,
I want to generate xml data file from sql query.So i created a new report and new data model whose type is SQL query and following is the query
select p.name as name,s.size_desc as sizes,sum(f.quantity) as quantity
from s_article_poc14073 p,s_size_poc14073 s,s_factsize_poc14073 f
where p.id = f.prod_id and s.size_id = f.size_id and p.id > 4
group by p.name,s.size_desc
order by 1
I have not given any Layout and when i view the data ,i get only the folowing
<?xml version="1.0" encoding="UTF-8" ?>
<ROWSET />
Therez no error with the sql query ,any help on this please
Thanks in advance
Sulakshana

Hi,
Yes my query returns rows when i run directly from the backend.
I have not defined any layout,because i just want the data to be generated as a xml file.
Thanks
Sulakshana

Need help to Open my Numbers worksheets!

I am trying to open a Numbers Worksheet that I worked on as recent as two days ago and a box pops up and it says that I have to have the newer version of Numbers to open it. When I click on the newest version of Numbers in the App Store, it says that I have already installed it. Help!

Make sure you are trying to open the document with the version of Numbers that is in your main Applications folder, not the version of Numbers that is in a subfolder named iWork '09.
It is likely that any icons you have on your dock are still pointing to the old version. So, even though you think you ae using the new version, actually you activating the old version.
The old and new Numbers can coexist happily on your Mac. You just need to take care that you are using the correct version to open any particular document.
SG

Sequential dates in new numbers 3.0 does it still do it??

sequential dates in new numbers 3.0 does it still do it??
Hi Gang, Happy New Year.
I am attempting to add sequential dates into my budget planner for the new year.
I know the old one could do it.
I can do sequential numbers in 3.0, just not able to do the date thing, it just keep cycling the four dates ( 4 cells ) i have highlighted
when i drag centre dot instead of adding the next later sequential date.
I have tried a few different types of date formats.
Any help welcome please.
Cheers Jason.

Hi Team, apparently you can do it.
You JUST CANNOT USE A DATE FROM LAST YEAR AND HAVE IT CARRY OVER TO THIS YEAR!
However an adendum to this now it is doing it for dates crossing yrs too.
I do not know what I did differently.... time spent checking it out ..... lots of times....
the dates go all funny when you cross years. I was putting a week between dates - 7 days - and as you can see
by the screen shot, the days vary anywhere from 4,5,6 or 7 days depending on its mood.
all sequences were started with the first 2 dates in the sequence.
The only one that worked is the one where both start dates are in January '14.
So if you do this please check the accuracy of auto fill.
So after all this, it would have been quicker to fill it in by hand, one cell at a time.
Apple please fix this. See sequence screen shot below. Cheers from Jason.
Keep on working on all this Apple, we may stick with you yet.
check 9 jan to 13 Jan, then 20 Jan to 26 Jan?? Oh well, bug found........... : )

Unable to view the data in infoobject

Hi all,
I am loading the data to info-obj this is the first time i am working on BI 7. everything is successfull. i had created the transformation and dtp successfully n in monitor screen its showing that the data has been loaded sucessfully. the thing is i didnt maintain a infosource as i am loading the data from the only one DS to one info obj. i am able to view the data in the psa but when i try to view the data in the infoobject its not der.
plz help me out
Thank & Regards
KK

Since you are using BI 7 for the first time., I hope you have executed the DTP after executing the infopackage.
In BW 3.5 we can load date from data source to Infoobject via PSA in one shot.
But In BI 7, we have to execute the infopackage first . This loads data from Datasource to PSA. Then you need to execute the DTP. Just double click on the DTP. You can see the execute in the third tab. When you execute the DTP, data will be further loaded from PSA to Infoobject.

I can view the data in front end form, but data is not avilable in backend

Hi,
i created a form with three blocks.In first block i entered the data.Based on the data it will fetch recodrs from A & B tables and insert into C table.This logic i have written in backend and put commit in front end and back end. In the 2nd block iam using C table. i can view the data in front end(C table) . But i unable to
see the data in C table when i go and see in back end.
Form is used for only querying purpose. for the C block insert allowed and update allowed is false.
Plz do the need ful

Please try and post sufficient information for someone to replicate your problem. We are not looking over your shoulder and do not have access to your database.
We need a minimum table structure, example data, a walk-through of how the form works - you mention 3 blocks and only half-way describe 1. Is another for the C block? Or is that a different form?
e.g. Enter search data in Block A. Execute Query. Blocks A and B populated with data from database tables based on FK relationship B to A. User presses Save button, procedure in form updates table C based on data in form and issues commit. Execute Query in Block C retrieves just inserted data in table C.
Is that remotely what's happening? Or something completely different?

How to add an index to a materialized view in Data Modeler 3.3

Hello everyone,
I'm looking for a how-to to add an index to a materialized view in Data Modeler 3.3.0.747, as I coudn't find a way to do it so far.
I looked here:
Relational Model
Physical Model
Oracle 11g
Materialized Views
"my_mv_name"
"INDEXES" IS NOT HERE IN THE TREE
"Tables" does not include it either
Thank you & Best regards,
Blama

Hi David,
thanks a lot. I did so and it worked, but I found a minor bug while doing so:
I marked the table as "Implement as Materialized View" and went to File->Export->DDL (for Oracle 11g).
The generated code (I checked all options in "Drop Selection") includes a row:
DROP MATERIALIZED VIEW mv_mymatview CASCADE CONSTRAINTS ;
which produces a syntax error.
Best regards,
Blama

Viewing my data in my numbers worksheets

Similar Messages

Maybe you are looking for