Viewing SSRS reports in HTML5

I am looking for some help on displaying SSRS reports in HTML5 browsers. Does Report Viewer 2012 support that ?.
Is there any other third party control out there . Any help greatly appreciated.
Thanks
Anil

Hi Muqadder,
The ReportViewer control cannot be embedded in HTML5 page directly. To work around this issue, you can write .aspx pages using html 5 and use ReportViewer control or iframe to display the report. For more information, please see:
http://www.hanselman.com/blog/AnnouncingTheWebStandardsUpdateHTML5SupportForTheVisualStudio2010Editor.aspx
Reference:
http://forums.asp.net/t/1855253.aspx/1
Regards,
Mike Yin
TechNet Community Support

Similar Messages

SSRS Report Viewer display issues after KB2888505 and now KB2898785

After patch KB2888505 both IE 9 and IE 10 started displaying cropped images with horizontal scroll bars when viewing SSRS Reports.  These reports functioned and fit the screen without scroll bars prior to this patch and returns
to normal once the patch is uninstalled.  There is no compatibility mode icon in the address bar and I have tried all browser modes in the F12 Developer Tools Menu with no change. Rolling back KB2888505 was a temp fix for my
users until KB2898785 was installed reverting back to the same cropped reports with the scroll bar. The only versions of IE in my environment are 9 and 10 and upgrading to 11 is not an option at this time. Others have reported this same issue so
maybe we can get more visibility on TechNet.

Hi,
These two KB include too many Individual updates. It's hard to figure out which exact update lead to this issue.
If you make sure the issue is caused by these updates package. The simple and easier way is to uninstall them.
Karen Hu
TechNet Community Support

How to hide/view a SSRS report parameter control dynamically at runtime?

Hi,
I am using SSRS 2005. I want to enable/disable or hide/view parameters based on another parameter selection.
Say Suppose I have 5 parameters. User selects first value in first parameter I should show only Second parameter and hide remaining 3 parameters (Parameter 3,Parameter 4 & Parameter 5).
If user selects second value in first parameter I should show third parameter and hide remaining 3 parameters(Parameter 2,Parameter 4 & Parameter 5).
Similarly If user selects third value in first parameter I should show fourth and fifth parameter and hide remaining 2 parameters(Parameter 2 & Parameter 3).
There is no relationship between these parameters except user selection.
I can not see any Visible property for report parameters.
Any "builtin" support in SSRS for this scenario.
Appreciate your help.
Regards,
Bala

Thanks for the tips.
RDL is deployed in Report sever and the Report is integrated with .net application. End user view the
Reports from Application.
Currently I show the parameters as you mentioned in point 2.
Based on my understanding on Point 1, I want to create an independent web page in .net that has
the entire parameters section and then a submit button that calls the report with the selected parameters.
From SSRS side, I want to hide the parameters statically and make default values as NULL.
Can I achieve Show/Hide parameter functionality by this way?
Regards,
Bala

Need to print an SSRS report in a web application to a designated printer without displaying in report viewer

In an asp.net webforms app, I need to be able to print SSRS reports directly to designated printers without displaying them in the report viewer. This needs to occur when I click on a button on the page, and I can use either local or server
side reports. There are 4 different reports, and one needs to be directed to a different printer from the other 3. One of them also has very rigid formatting requirements, so the formatting cannot be altered by the print method. I have
researched this for hours, but all the solutions I have found for doing this are for windows apps, not web apps. Can anybody help?

Hello,
You can try to use the Report Service web service to render the report and send to a printer to print the report programming.
http://printssrsreport.blogspot.com/2011/09/print-ssrs-report-using.html
Summer

Urgent : SSRS reports zoom in option is not working in IE9 compatability view

Hi,
We have SSRS reports which when viewed in IE 9 compatability view, zoom in option is not working properly.
SSRS report have 4 charts inside a rectangle. when zoom in from 100% to 50% only rectangle shrinkes not the charts.
Please let me know why it is happening and solutions if any?
Rakesh Jayaram http://blogs.msdn.com/b/rakesh_ramblings/

Hi Wendy Fu,
Thanks for your support. Below are the steps and screenshots as per your requirement.
/*******************Below are the steps to replicate ************************/
This document explain IE9 compatibility issue with SSRS report (SSRS 2008 R2 and IE9)
Tools and software used:
Reports are rendered on Share Point 2010 server which uses SSRS 2008 R2.
Reports are accessed using web browser IE9, IE10 ….
Problem statement:
To work OTHER reports compatibility mode in IE should be ON
To work SSRS reports (mainly zoom) compatibility mode in IE should be OFF
OTHER report is being used by customer and they will start using SSRS reports as well. While using both OTHER reports and SSRS reports customer do not prefer to keep switching between compatibility modes.
“Browser Mode: IE9”
Steps to reproduce Zoom issue for SSRS report with Compatibility mode is given below:
Step-1: Select Tools menu -> Compatibility View Settings
Below setting is suggested for OTHER users so tick as shown below,
Step-2: On decision center select link and Open the report home page and click the link to open the report.
Step-3: On SSRS reports Change Zoom level from 100% to say 50%. Here all charts are not moved with container frame.
If “Browser Mode: IE8” is set with following steps then this issue does not happen.
Press F12 and from and select IE8 as shown below.
Press F12 again so this will set the mode and then try Zoom option it works fine. However this setting temporary and will remain for the session only.
If compatibility mode is OFF then also this does not happen. Please see image below.
Rakesh Jayaram http://blogs.msdn.com/b/rakesh_ramblings/

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

SSRS reports are not fitting properly in Report Viewer Control

Hi All,
We are using Report Viewer Control to render SSRS reports & show it on SharePoint web page. In .aspx page we are putting Report Viewer Control as follows:
The zoom percent of Report we are getting from Report Server is 100%. We are making it as 50% to show it on our page. On one page, we are showing 2 reports.
<rsweb:ReportViewer ID="rpv2Chart1" runat="server" Font-Names="Verdana" Font-Size="8pt" ProcessingMode="Remote" Height="211px" Width="813px" ZoomPercent="50"></rsweb:ReportViewer >
The reports are coming. But the reports which we are getting inside the control are not readable & 25% of Report Viewer Control on our right hand side is blank.
As you can see it's not readable. For readability we want to use that white space also & want to utilize full controls's space. But if we try to increase percentage from our report viewer tag, then the graph is zooming in with both, height & width
so it's going out of control.
Client don't want scroll bars on Report Viewer control. We just want to utilize the entire Report Viewer Control space.
Can anyone suggest us how to do that?
Thanks,
Sanjay

Hi Sanjay,
I'm afraid that it is not the correct forum for this issue.
If it is the SSRS issue, you could post this issue here:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
If it is the VS report control issue, maybe you would get better response here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can i use Report viewer web part in SharePoint 2013 app to show SSRS reports?

Can i use Report viewer web part in SharePoint 2013 app to show SSRS reports?

SharePoint app you mean a simple sharePoint 2013 application like site, team site etc, or do you mean an App (the new feature like webPart).
To add a SSRS Report viewver web part follow these steps
1. Edit the page
2. Choose insert a webpart
3.Select SQL server Reporting -> SQL Server Reporting Services Report Viewer webpart
4. Configure the webpart to show your .rdl files.
(See the img below. Plz mark as answered if it helps).

SSRS report viewer webpart issues in SharePoint 2013

Even though SSRS Add in has been installed on both the frontends which are in the same SharePoint 2013 farm, SSRS report viewer web part does not render any reports from one of the servers and on that server it just asks to configure the webpart by giving
an option to open the tool pane...
I am really not sure why it is not picking up the report RDL configuration, which is working fine from the other server.
Any help on this would be really appreciated.
Thanks in advance.

Run the SharePoint Products and Technologies Wizard on this server. If simply running it does not fix it, remove the server from the farm and then re-join it, using the wizard.
Stacy Anothersharepointblog.blogspot.com

Report Viewer - SSRS settings/parameters and List Viewer

Hello
I have 2 questions. Using SharePoint 2010, data are stored in SQL 2012
1. SSRS Report Viewer - is there a way to display parameter panel with the question on the top of the web part or left side (it shows on the right side)? Can't seem to find that setting, but seen some samples of the reports that show parameters drop
down on top of the Viewer.
2. Using List View Web part to display the items from the external content (sql), but can't seem to find a way to select the record without going into details for this record. In other words - I'd like to display a table with few records, have an ability
to select the record and pass the ID as a parameter to the report, but also give a user ability to view details of each record. Is there a way to add the radio button or something like that next to each record?
Thank you!
Alla Sanders

Hello,
This is the answer for 1. This is the way I did it. So, use content editor webpart. Add this script to the webpart. Script shows a label and a dropdown list and attach a javascript function to onchange event of dropdown list. Onchange event creates the dynamic
report url and open that report url in new browser window.
<span>Report parameter one : </span>
<select onchange="loadreport(this.selectedIndex); id="cars">
<option value="volvo">Volvo</option>
<option value="saab">Saab</option>
<option value="mercedes">Mercedes</option>
<option value="audi">Audi</option>
</select>
<script type="text/javascript">
function loadreport(index) {
var ddcars = document.getElementById("cars");
var carname = ddcars.options[index].value;
var rpt = "http://yourserver.com/MA/SIP/_layouts/ReportServer/RSViewerPage.aspx?rv:RelativeReportUrl=/MA/SIP/SC_Reports/Location_Reports/YourReportName.rdl&DefaultItemOpen=1&rv:HeaderArea=None&rv:DocMapMode=Collapsed&rv:toolbaritemsdisplaymode=152&rp:CarName=" + carname + "&rv:ParamMode=Collapsed" ;
window.open(rpt);
</script>
Hope this can help!
Thanks!

SSRS Report Viewer Web Part - Saving it as a Project Site Template

Hi all,
I ended up creating a custom filter web part that was passing the PUID to SSRS report viewer web part in a project site.
Works perfectly fine until you save the site as a project site template. I attached the site template to an EPT and creating a new project. The project site created fine, but the connections between the custom filter web part and SSRS Report viewer web part
is broken!
Paul gave me this web part to start with, but this doesn't work in SharePoint Integrate Mode:
http://gallery.technet.microsoft.com/projectserver/Report-Viewer-webpart-439e0062
And SharePoint Integrated Mode is what we are pushing our clients towards.
Any help will be highly appreciated.
SJ

Looks like I forgot to respond to this...apologies for the delay.
For the client that I asked this question, I ended up writing it programmatically and it works.
But I would prefer using products now...rather than Band-Aid approach - I guess my role is shifting.
Luckily I was introduced to a SharePoint and Project Server developer here in London and he has been developing products for SharePoint and Project Server since version 2007! I spoke about my dilemma and he already had a product for this for SP
integrated mode! I have now started to add this product to all my the PS2010, PS2013 implementations. Great thing is it doesn't cost much at all and he provides support for it as part of subscription. I guess I twisted his arm a little bit - not physically!
So far I have used the product at two sites and applied CUs over it - no issues at all. This is a proper packaged product and can't recommend it high enough. Yes, you will have to let the client know about this third party tool, but we manage the relationship
on behalf of the client - just like when we buy Nintex, IPMO or Fluentpro products.
If anyone is struggling with SSRS web part in Project Sites and doesn't have the time to write codes as they have multiple PS implementations on the go then you can contact
[email protected]
I must say his marketing isn't that great, but since he is a freelancer he only works and sells his products to people within his network, I think he maybe changing that soon! Hopefully :-)

SSRS Report Viewer Control Parameter alignment

I am having problem aligning parameters in ssrs report viewer control ,is there any way i can control the display of the parameters in left side alignment or right side alignment. please see the below pic for more details.
I am using vs.net 2012 and sql server 2012 and calling this server report in a asp.net page using report viewer control and report viewer process mode is "Remote"
http://social.msdn.microsoft.com/Forums/getfile/514664

Hi siva9000,
In Reporting Services, we cannot customize the parameter pane like the ways you have mentioned above. We can refer to the following link, vote it is as important and hope Microsoft improve this feature in the next service pack or product release. Allow
SSRS Parameter Panel to be formatted:
https://connect.microsoft.com/SQLServer/feedback/details/545893/allow-ssrs-parameter-panel-to-be-formatted
In addition, as Olaf suggested, we can hide the parameter prompt area, then create a custom parameter prompt area in the web page to achieve the goal. Please refer to the following blog:
http://www.mssqltips.com/sqlservertip/1751/custom-control-and-setup-of-ssrs-report-parameters-from-a-web-page/
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SSRS report viewer web part error only in IE not in Chrome & Safari

SSRS is setup in SP integrated mode.
I am getting this error when I click a report parameter drop down for the second time to display the list of avaliable values:
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response
filters, HttpModules, or server trace is enabled. Details: Error parsing near '< !DOCTYPE html PUB'.
I researched this issue and have added the following to my SP site's web.config:
<appSettings>
<add key="aspnet: MaxHttpCollectionKeys" value="5000" />
</appSettings>
Oddly enough, I only get this error in IE not in Chrome it works fine... Any ideas on how to correct?
fyi- Drop down has <25 items I would say.

Hi,
According to your post, my understanding is that you had some issues about the SSRS.
As you had known, this issue is caused that Microsoft security update MS11-100 limits the maximum number of form keys, files, and JSON members to 1000 in an HTTP request.
Because of this change, ASP.NET applications reject requests that have more than 1000 of these elements.
HTTP clients that make these kinds of requests will be denied, and an error message will appear in the web browser.
SSRS report filtering column were sending as HTTPCollectionKeys and that was reaching the maximum limit.
The solution is adding the MaxHttpCollectionKeys as you had did, you can try add a larger number to check whether it works, such as 9999 as below.
<appSettings>

<add key="aspnet:MaxHttpCollectionKeys" value="9999" />
</appSettings>
http://blogs.msdn.com/b/paulking/archive/2012/01/16/using-an-http-module-to-assist-in-adjusting-the-value-of-aspnet-maxhttpcollectionkeys-imposed-by-ms11-100.aspx
As this issue is related to the SSRS, you can post the issue to the SSRS forum.
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
More experts will assist you, then you will get more information relation to SSRS.
Thank you for your understanding and support.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Generate SSRS Report and save as PDF in SharePoint

Hi,
I am working on a SharePoint 2010 Visual WebPart that lets a user click a button to generata a SSRS report and save the report in a SharePoint Library as a PDF file. Code is mentioned below:
try
string siteContext = SPContext.Current.Web.Url;
string strReport = siteContext + "/Reports/Quote/Quote.rdl";
WR_SSRS.ReportExecutionService rs = new WR_SSRS.ReportExecutionService();
rs.Url = siteContext + "/_vti_bin/ReportServer/ReportExecution2005.asmx";
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
byte[] result;
string format = "PDF";
string historyID = null;
string devInfo = "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>";
WR_SSRS.ParameterValue[] parameters = new WR_SSRS.ParameterValue[3];
parameters[0] = new WR_SSRS.ParameterValue();
parameters[0].Name = "EnqID";
parameters[0].Value = enqID.ToString();
parameters[1] = new WR_SSRS.ParameterValue();
parameters[1].Name = "QuotationID";
parameters[1].Value = quoteID;
WR_SSRS.DataSourceCredentials[] credentials = null;
string showHideToggle;
string encoding;
string mimeType;
WR_SSRS.Warning[] warnings;
WR_SSRS.ParameterValue[] reportHistoryParameters;
string[] streamIDs;
WR_SSRS.ExecutionInfo execInfo = new WR_SSRS.ExecutionInfo();
WR_SSRS.ExecutionHeader execHeader = new WR_SSRS.ExecutionHeader();
string SessionId = null;
string extension;
rs.ExecutionHeaderValue = execHeader;
execInfo = rs.LoadReport(strReport, historyID);
rs.SetExecutionParameters(parameters, "en-gb");
SessionId = rs.ExecutionHeaderValue.ExecutionID;
result = rs.Render(format, devInfo, out extension, out mimeType, out encoding, out warnings, out streamIDs);
execInfo = rs.GetExecutionInfo();
using (SPSite site = new SPSite(SPContext.Current.Site.ID))
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPFolder folder = web.Folders[siteContext + "/Quotes"];
string filename = string.Concat(quoteID, ".pdf");
//remove old copies
SPList lib = web.Lists["Quotes"];
foreach (SPListItem i in lib.GetItems())
if (i.Name == filename)
i.Delete();
break;
SPFile file = folder.Files.Add(filename, result);
SPListItem item = file.Item;
item["EnquiryID"] = enqID.ToString();
item["FinalQuote"] = "No";
item.Update();
web.AllowUnsafeUpdates = false;
catch (Exception ex)
LogError(ex.Message);
The WebPart works fine in my local server and even on another development testing server. However, once deployed to the live server that has claims authentication it stops working and throws an error that says:
"Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<RSError xmlns="http://www.microsoft.com/sql/reportingservices"><MoreInformation><Message>An unknown error occurred with the Reporting Services endpoint on this SharePoint site. Contact the SharePoint site administrator for help.</Message></MoreInformation></RSError>
If I open the report manually in SharePoint Site, it works fines it even works fine when try to view in a WebPart.
Can someone help me with this ?
Regards, Vikram

Hi Vicky,
Based on the error message, it is related to the service account for reporting service.
If the Report Server service runs under a built-in account such as NetworkService, the Grant database access option in SharePoint Central Administration will not work correctly.
Configure the service account to run under a domain user account as follows:
1. Start the Reporting Services Configuration tool and connect to the report server.
2. On the Service Account page, click Use another account, enter a domain user account, and click Apply.
3. Click Web Service Identity, for Report Server, click New, type an application Restart the Report Server service.
Here is a detailed MSDN article for your reference:
http://msdn.microsoft.com/en-us/library/ms159704.aspx
Best Regards
Zhengyu Guo
TechNet Community Support

SSAS report action to pass multi-value list of dimention key values to a SSRS report parameter

This was originally posted on StackOverflow and suggested I try here as well.
I want to create a report action in an SSAS OLAP cube that generates a list of formatted values to pass into an SSRS report parameter that accepts a multi-valued parameter list. This would be applied at the
cell level in the SSAS action. I have found a solution that gets me most of the way:
How to Pass Multiple Values from an SSAS Report Drill Through Action to an SSRS Multi-Value Parameter, but not quite. The action does appear in Excel and works
if I run the action from a cell that is at or below the dimension attribute I am generating the list for, in this case,
Account Key.
Below is a link to a screen capture (unable to embed it due to lack of reputation) showing the action and dimension structure in Excel. The action works as long as I run it at the
Account Key level or below. I want to be able to run it at higher levels, such as
Account Major and still have it generate all then related Account Key values for the SSRS report parameter. Running it at the higher
Account Major level does not trigger the report to run.
Excel Action Screen Shot:
http://i.stack.imgur.com/QCGSp.png
Below is the MDX I am using to generate the value for the report parameter:
UrlEscapeFragment(
GENERATE(
DESCENDANTS(
[Account].[Account Key].CurrentMember,
[Account].[Account Key].[Account Key]
[Account].[Account Key].CURRENTMEMBER.Name,
"&rp:Account="
I am hoping that I can somehow modify the MDX above to make it return all the
Account Keys for any attribute of the Account dimension when ran from any measure cell, not just when ran at self and children of
Account Key in the pivot table.
Also, if it helps, I can execute the following MDX query on the cube and get the results I am looking for.
WITH MEMBER [Measures].[Account Key List] as
GENERATE(
DESCENDANTS([Account].[Account].CurrentMember, [Account].[Account].[Account]),
[Account].[Account].CURRENTMEMBER.NAME,
"&rp:Account=")
SELECT {[Measures].[Account Key List]} on 0,
([Account].[Account Company Number].[Account Company Number],[Account].[Account Major].[Account Major]
) on 1
FROM [Company 10 Action Demo]
Below are partial results:
10.116&rp:Account=10.116.010
10.117&rp:Account=10.117.010&rp:Account=10.117.020
10.120&rp:Account=10.120.005&rp:Account=10.120.006&rp:Account=10.120.010&rp:Account=10.120.020&rp:Account=10.120.030&rp:Account=10.120.040&rp:Account=10.120.050&rp:Account=10.120.060&rp:Account=10.120.380&rp:Account=10.120.999
10.123
Questions
Any ideas what I might need to do to get Account Key to be returned for any attribute of the
Account dimension?
Would I possibly have to alter my Account dimension in the cube to get this to work?
Thanks in advance.
Edit 1 - Adventure Works Cube Version
I was unable to get the suggested answer with the "Exists" function to work. To better demonstrate this issue, I have recreated it using the Adventure Works Cube.
I will focus on the Customer dimension, specifically the Customer and
Education attributes. I created a report action called Test Report Action. Below is the XML created for it in the cube.
<Action xsi:type="ReportAction" dwd:design-time-name="f35ad5ee-5167-4fb8-a0e0-0a74cc6e81c6">
<ID>Report Action 1</ID>
<Name>Test Report Action</Name>
<TargetType>Cells</TargetType>
<Target></Target>
<Type>Report</Type>
<ReportServer>SQLSERVER</ReportServer>
<Path>ReportServer?/Test Report</Path>
<ReportParameters>
<ReportParameter>
<Name>Test Customer Existing</Name>
<Value>UrlEscapeFragment(
GENERATE(
EXISTING DESCENDANTS(
[Customer].[Customer].CurrentMember,
[Customer].[Customer].[Customer]
[Customer].[Customer].CURRENTMEMBER.Name,
"&rp:Customer="
)</Value>
</ReportParameter>
</ReportParameters>
<ReportFormatParameters>
<ReportFormatParameter>
<Name>rs:Command</Name>
<Value>Render</Value>
</ReportFormatParameter>
<ReportFormatParameter>
<Name>rs:Renderer</Name>
<Value>HTML5</Value>
</ReportFormatParameter>
</ReportFormatParameters>
</Action>
Below are the steps to re-create the issue.
Connect to the cube in Excel
Add dimension Customer -> More Fields -> Customer
Add measure Internet Sales -> Internet Sales Amount
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action" and see customer values created for URL
When the action is ran at this point with Customer, I see the values created in the URL shown message box (since there is no SSRS report server at location specified).
Now the part I'm unable to resolve
Remove the Customer dimension and add Customer -> Demographic -> Education
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action"
Nothing happens. If I ran the action on the cell next to "Bachelors", I would want it to build up all the list of all the "Customers" that make up the "Bachelors" in the
Customer dimension as part of the report parameter. If no attributes where used in the cube from the
Customer dimension for that cell, then I would like it to return "All Customers", or something similar to show that all customers are included in the aggregations.
I am not too MDX savvy, thus far. I think I need to somehow join the
Customers to Internet Sales Amount in the Generate function portion. I have tried several different combinations of the
Customer dimension and Internet Sales Amount, along with various functions to see if I could get this to work with no success. I am hoping that someone more knowledgeable the me will have a solution. If you need more details,
please ask and I will provide them.

Simon,
Thanks for you help with this. This morning I found a workaround. Below describes what that is.
What I ended up doing was getting a list of values from a degenerate dimension that I could use to pass to SSRS to get a list of transactions for a report. Below is how I did this, in relation to the Adventure Works cube using the degenerate dimension
Internet Order Details.
WITH MEMBER [Measures].[Order Param List] AS
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
SELECT {[Measures].[Order Param List], [Measures].[Internet Sales Amount]} ON 0
,([Date].[Calendar].[Date]) ON 1
FROM [Adventure Works]
This will get a list of Sales Order Number in a text string, separated by "&rp:OrderNum=" for each measure of
Internet Sales. This would allow me to create an SSRS report to bring back detail information for each
Sales Order Number. Below are some sample results.
May 16, 2007 SO50493&rp:OrderNum=SO50494&rp:OrderNum=SO50495&rp:OrderNum=SO50496&rp:OrderNum=SO50497&rp:OrderNum=SO50498&rp:OrderNum=SO50499&rp:OrderNum=SO50500 $12,157.80
May 17, 2007 SO50501&rp:OrderNum=SO50502&rp:OrderNum=SO50503&rp:OrderNum=SO50504&rp:OrderNum=SO50505&rp:OrderNum=SO50506&rp:OrderNum=SO50507&rp:OrderNum=SO50508 $13,231.62
May 18, 2007 SO50509&rp:OrderNum=SO50510 $4,624.91
With this, I can then create a Report Action in SSRS with a Parameter Value of
UrlEscapeFragment(
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
The way I was going about it before was flawed, as I was trying to get a list of the granular values from each dimension used to build the measure value and pass each one of those as separate parameters. I just needed to set something unique for each fact
measure transaction that represents the value and uses that in a query parameter for the SSRS report.

Viewing SSRS reports in HTML5

Similar Messages

Maybe you are looking for