Virtualgl/bumblebee + HDMI out + wine = application crash

I have a weird prob with bumblebee/virtualgl/wine. If I hook up my laptop to my monitor Starcraft 2 stops working. I get these errors.
X Error of failed request: BadDrawable (invalid Pixmap or Window parameter)
Major opcode of failed request: 140 (MIT-SHM)
Minor opcode of failed request: 3 (X_ShmPutImage)
Resource id in failed request: 0x6800006
Serial number of failed request: 20
Current serial number in output stream: 20
terminate called after throwing an instance of 'rrerror'
http://pastebin.com/8dDWDwyd
http://pastebin.com/a9yCkuH5
It works fine when I run it on laptop screen but crashed with those errors when I tried to run it on my monitor. I've tried reinstalling it when my monitor is connected on a fresh wine prefix but it still crashes. The thing is that other programs run fine (glxspears). Does anyone know a fix for this?
edit: I've also posted this on bumblebee issues. Which can be found here: https://github.com/Bumblebee-Project/Bu … issues/106 .
Last edited by LinuxFTW (2012-03-17 22:40:30)

Issue has been resolved. Fix can be found here. https://github.com/Bumblebee-Project/Bu … issues/106

Similar Messages

Snow leopard logs out and applications crashing

I replaced hard drive in macbook and decided good time to upgrade to snow leopard. well now with clean install on new hard drive snow leopard randomly logs me out and i get a blue screen flash then end up on log in. it does it on regular log in and safe mode. It also does it with aftermarket 4g of ram and apple 1g of ram that came with macbook. Also before it logs out if im in safari it keeps reloading the page almost everytime i touch the track pad
any help would be appreciated.
using 10.6.8

Solved.
Hardware test said everything was good. I ended up using imac at home to make bootable usb drive of snow leopard. installed that and got same results. finally someone suggested redoing partition since i did original partition on the superdrive in macbook. New partition, clean install and everyting working great

Running any wine application instantly crashes entire X server

I'm not really sure how to debug this issue. Suddenly, without performing any pacman update or other major changes, running any wine application (even winecfg) crashes X.
Looking at strace, it appears to be a GPU related issue, and temporarily removing lib32/libXxf86vm (the last module loaded according to strace) fixes the issue. However it breaks the 3d application I want to use under Wine.
On the other hand, glxgears for example works perfectly.
Here is my xorg.log:
[ 38478.299]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 38478.299] X Protocol Version 11, Revision 0
[ 38478.299] Build Operating System: Linux 3.7.0-1-ARCH x86_64
[ 38478.299] Current Operating System: Linux weeaboo.com 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64
[ 38478.299] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/7d2cd77e-8554-449e-a221-c72ec7c072d6 init=/usr/lib/systemd/systemd lvmwait=/dev/md127 ro panic=20
[ 38478.299] Build Date: 16 December 2012 04:45:14PM
[ 38478.299]
[ 38478.299] Current version of pixman: 0.28.2
[ 38478.299] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 38478.299] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 38478.299] (==) Log file: "/var/log/Xorg.8.log", Time: Sun Jan 6 17:23:50 2013
[ 38478.299] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 38478.299] (==) No Layout section. Using the first Screen section.
[ 38478.299] (**) |-->Screen "VNC Screen" (0)
[ 38478.299] (**) | |-->Monitor "VNC Monitor"
[ 38478.299] (==) No device specified for screen "VNC Screen".
Using the first device section listed.
[ 38478.299] (**) | |-->Device "Intel Graphics"
[ 38478.299] (==) Automatically adding devices
[ 38478.299] (==) Automatically enabling devices
[ 38478.299] (==) Automatically adding GPU devices
[ 38478.299] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 38478.299] Entry deleted from font path.
[ 38478.299] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 38478.299] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 38478.299] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 38478.299] (II) Loader magic: 0x7fcc40
[ 38478.299] (II) Module ABI versions:
[ 38478.299] X.Org ANSI C Emulation: 0.4
[ 38478.299] X.Org Video Driver: 13.1
[ 38478.299] X.Org XInput driver : 18.0
[ 38478.300] X.Org Server Extension : 7.0
[ 38478.300] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 38478.301] (--) PCI:*(0:0:2:0) 8086:0122:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xe0000000/268435456, I/O @ 0x0000ff00/64
[ 38478.301] (II) Open ACPI successful (/var/run/acpid.socket)
[ 38478.301] Initializing built-in extension Generic Event Extension
[ 38478.301] Initializing built-in extension SHAPE
[ 38478.301] Initializing built-in extension MIT-SHM
[ 38478.301] Initializing built-in extension XInputExtension
[ 38478.301] Initializing built-in extension XTEST
[ 38478.302] Initializing built-in extension BIG-REQUESTS
[ 38478.302] Initializing built-in extension SYNC
[ 38478.302] Initializing built-in extension XKEYBOARD
[ 38478.302] Initializing built-in extension XC-MISC
[ 38478.302] Initializing built-in extension SECURITY
[ 38478.302] Initializing built-in extension XINERAMA
[ 38478.302] Initializing built-in extension XFIXES
[ 38478.302] Initializing built-in extension RENDER
[ 38478.302] Initializing built-in extension RANDR
[ 38478.302] Initializing built-in extension COMPOSITE
[ 38478.302] Initializing built-in extension DAMAGE
[ 38478.302] Initializing built-in extension MIT-SCREEN-SAVER
[ 38478.302] Initializing built-in extension DOUBLE-BUFFER
[ 38478.302] Initializing built-in extension RECORD
[ 38478.302] Initializing built-in extension DPMS
[ 38478.302] Initializing built-in extension X-Resource
[ 38478.302] Initializing built-in extension XVideo
[ 38478.302] Initializing built-in extension XVideo-MotionCompensation
[ 38478.302] Initializing built-in extension XFree86-VidModeExtension
[ 38478.302] Initializing built-in extension XFree86-DGA
[ 38478.302] Initializing built-in extension XFree86-DRI
[ 38478.302] Initializing built-in extension DRI2
[ 38478.302] (II) LoadModule: "glx"
[ 38478.303] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 38478.303] (II) Module glx: vendor="X.Org Foundation"
[ 38478.303] compiled for 1.13.1, module version = 1.0.0
[ 38478.303] ABI class: X.Org Server Extension, version 7.0
[ 38478.303] (==) AIGLX enabled
[ 38478.303] Loading extension GLX
[ 38478.303] (II) LoadModule: "intel"
[ 38478.303] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 38478.304] (II) Module intel: vendor="X.Org Foundation"
[ 38478.304] compiled for 1.13.1, module version = 2.20.17
[ 38478.304] Module class: X.Org Video Driver
[ 38478.304] ABI class: X.Org Video Driver, version 13.1
[ 38478.304] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 38478.305] (--) using VT number 3
[ 38478.308] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 38478.308] (==) intel(0): RGB weight 888
[ 38478.308] (==) intel(0): Default visual is TrueColor
[ 38478.308] (**) intel(0): Option "AccelMethod" "uxa"
[ 38478.308] (**) intel(0): Option "DRI" "false"
[ 38478.308] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Desktop (GT2+)
[ 38478.308] (**) intel(0): Relaxed fencing enabled
[ 38478.308] (**) intel(0): Wait on SwapBuffers? enabled
[ 38478.308] (**) intel(0): Triple buffering? enabled
[ 38478.308] (**) intel(0): Framebuffer tiled
[ 38478.308] (**) intel(0): Pixmaps tiled
[ 38478.308] (**) intel(0): 3D buffers tiled
[ 38478.308] (**) intel(0): SwapBuffers wait enabled
[ 38478.308] (==) intel(0): video overlay key set to 0x101fe
[ 38478.319] (II) intel(0): Output VGA1 using monitor section VNC Monitor
[ 38478.320] (II) intel(0): Output HDMI1 has no monitor section
[ 38478.366] (II) intel(0): Output DP1 has no monitor section
[ 38478.379] (II) intel(0): Output HDMI2 has no monitor section
[ 38478.392] (II) intel(0): Output HDMI3 has no monitor section
[ 38478.436] (II) intel(0): Output DP2 has no monitor section
[ 38478.479] (II) intel(0): Output DP3 has no monitor section
[ 38478.493] (II) intel(0): EDID for output VGA1
[ 38478.494] (II) intel(0): EDID for output HDMI1
[ 38478.539] (II) intel(0): EDID for output DP1
[ 38478.552] (II) intel(0): EDID for output HDMI2
[ 38478.566] (II) intel(0): EDID for output HDMI3
[ 38478.609] (II) intel(0): EDID for output DP2
[ 38478.654] (II) intel(0): EDID for output DP3
[ 38478.654] (II) intel(0): Output VGA1 disconnected
[ 38478.654] (II) intel(0): Output HDMI1 disconnected
[ 38478.654] (II) intel(0): Output DP1 disconnected
[ 38478.654] (II) intel(0): Output HDMI2 disconnected
[ 38478.654] (II) intel(0): Output HDMI3 disconnected
[ 38478.654] (II) intel(0): Output DP2 disconnected
[ 38478.654] (II) intel(0): Output DP3 disconnected
[ 38478.654] (WW) intel(0): No outputs definitely connected, trying again...
[ 38478.654] (II) intel(0): Output VGA1 disconnected
[ 38478.654] (II) intel(0): Output HDMI1 disconnected
[ 38478.654] (II) intel(0): Output DP1 disconnected
[ 38478.654] (II) intel(0): Output HDMI2 disconnected
[ 38478.654] (II) intel(0): Output HDMI3 disconnected
[ 38478.654] (II) intel(0): Output DP2 disconnected
[ 38478.654] (II) intel(0): Output DP3 disconnected
[ 38478.654] (WW) intel(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 38478.654] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 38478.654] (II) intel(0): Kernel page flipping support detected, enabling
[ 38478.654] (==) intel(0): DPI set to (96, 96)
[ 38478.654] (II) Loading sub module "fb"
[ 38478.654] (II) LoadModule: "fb"
[ 38478.654] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 38478.655] (II) Module fb: vendor="X.Org Foundation"
[ 38478.655] compiled for 1.13.1, module version = 1.0.0
[ 38478.655] ABI class: X.Org ANSI C Emulation, version 0.4
[ 38478.655] (==) Depth 24 pixmap format is 32 bpp
[ 38478.655] (II) intel(0): Allocated new frame buffer 1728x980 stride 7168, tiled
[ 38478.656] (II) UXA(0): Driver registered support for the following operations:
[ 38478.656] (II) solid
[ 38478.656] (II) copy
[ 38478.656] (II) composite (RENDER acceleration)
[ 38478.656] (II) put_image
[ 38478.656] (II) get_image
[ 38478.656] (==) intel(0): Backing store disabled
[ 38478.656] (==) intel(0): Silken mouse enabled
[ 38478.656] (II) intel(0): Initializing HW Cursor
[ 38478.656] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 38478.657] (==) intel(0): DPMS enabled
[ 38478.657] (==) intel(0): Intel XvMC decoder enabled
[ 38478.657] (II) intel(0): Set up textured video
[ 38478.657] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 38478.657] (II) intel(0): direct rendering: Disabled
[ 38478.657] (WW) intel(0): Option "Shadow" is not used
[ 38478.657] (==) intel(0): hotplug detection: "enabled"
[ 38478.657] (--) RandR disabled
[ 38478.663] (II) AIGLX: Screen 0 is not DRI2 capable
[ 38478.663] (II) AIGLX: Screen 0 is not DRI capable
[ 38478.675] (II) AIGLX: Loaded and initialized swrast
[ 38478.675] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 38478.788] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 38478.788] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38478.788] (II) LoadModule: "evdev"
[ 38478.788] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38478.791] (II) Module evdev: vendor="X.Org Foundation"
[ 38478.791] compiled for 1.13.0, module version = 2.7.3
[ 38478.791] Module class: X.Org XInput Driver
[ 38478.791] ABI class: X.Org XInput driver, version 18.0
[ 38478.791] (II) Using input driver 'evdev' for 'Power Button'
[ 38478.791] (**) Power Button: always reports core events
[ 38478.791] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 38478.791] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 38478.791] (--) evdev: Power Button: Found keys
[ 38478.791] (II) evdev: Power Button: Configuring as keyboard
[ 38478.791] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 38478.791] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 38478.791] (**) Option "xkb_rules" "evdev"
[ 38478.791] (**) Option "xkb_model" "evdev"
[ 38478.791] (**) Option "xkb_layout" "us"
[ 38478.815] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 38478.815] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38478.815] (II) Using input driver 'evdev' for 'Power Button'
[ 38478.816] (**) Power Button: always reports core events
[ 38478.816] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 38478.816] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 38478.816] (--) evdev: Power Button: Found keys
[ 38478.816] (II) evdev: Power Button: Configuring as keyboard
[ 38478.816] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 38478.816] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 38478.816] (**) Option "xkb_rules" "evdev"
[ 38478.816] (**) Option "xkb_model" "evdev"
[ 38478.816] (**) Option "xkb_layout" "us"
[ 38478.816] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 38478.816] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event10)
[ 38478.816] (II) No input driver specified, ignoring this device.
[ 38478.816] (II) This device may have been added with another device file.
[ 38478.817] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event11)
[ 38478.817] (II) No input driver specified, ignoring this device.
[ 38478.817] (II) This device may have been added with another device file.
[ 38478.817] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12)
[ 38478.817] (II) No input driver specified, ignoring this device.
[ 38478.817] (II) This device may have been added with another device file.
[ 38478.817] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event3)
[ 38478.817] (II) No input driver specified, ignoring this device.
[ 38478.817] (II) This device may have been added with another device file.
[ 38478.818] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
[ 38478.818] (II) No input driver specified, ignoring this device.
[ 38478.818] (II) This device may have been added with another device file.
[ 38478.818] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event5)
[ 38478.818] (II) No input driver specified, ignoring this device.
[ 38478.818] (II) This device may have been added with another device file.
[ 38478.818] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 38478.818] (II) No input driver specified, ignoring this device.
[ 38478.818] (II) This device may have been added with another device file.
[ 38478.818] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[ 38478.818] (II) No input driver specified, ignoring this device.
[ 38478.818] (II) This device may have been added with another device file.
[ 38478.818] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
[ 38478.818] (II) No input driver specified, ignoring this device.
[ 38478.818] (II) This device may have been added with another device file.
[ 38478.818] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event9)
[ 38478.818] (II) No input driver specified, ignoring this device.
[ 38478.818] (II) This device may have been added with another device file.
[ 38478.818] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 38478.818] (II) No input driver specified, ignoring this device.
[ 38478.818] (II) This device may have been added with another device file.
[ 38498.236] (EE)
[ 38498.236] (EE) Backtrace:
[ 38498.236] (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x58a426]
[ 38498.236] (EE) 1: /usr/bin/X (0x400000+0x18e279) [0x58e279]
[ 38498.236] (EE) 2: /usr/lib/libpthread.so.0 (0x7f5c62188000+0xf1e0) [0x7f5c621971e0]
[ 38498.236] (EE) 3: /usr/bin/X (xf86GetGammaRampSize+0x43) [0x480283]
[ 38498.236] (EE) 4: /usr/bin/X (0x400000+0x8a3aa) [0x48a3aa]
[ 38498.236] (EE) 5: /usr/bin/X (0x400000+0x37e61) [0x437e61]
[ 38498.236] (EE) 6: /usr/bin/X (0x400000+0x2696a) [0x42696a]
[ 38498.236] (EE) 7: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f5c60e0ca15]
[ 38498.236] (EE) 8: /usr/bin/X (0x400000+0x26cad) [0x426cad]
[ 38498.236] (EE)
[ 38498.236] (EE) Segmentation fault at address 0x51
[ 38498.236]
Fatal server error:
[ 38498.236] Caught signal 11 (Segmentation fault). Server aborting
[ 38498.237]
[ 38498.237] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 38498.237] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 38498.237] (EE)
[ 38498.268] (II) evdev: Power Button: Close
[ 38498.268] (II) UnloadModule: "evdev"
[ 38498.289] (II) evdev: Power Button: Close
[ 38498.289] (II) UnloadModule: "evdev"
[ 38498.293] Server terminated with error (1). Closing log file.
and here is the end of the strace of winecfg:
poll([{fd=10, events=POLLIN}], 1, -1) = 1 ([{fd=10, revents=POLLIN}])
recv(10, "\1\0j\0\0\0\0\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096, 0) = 32
recv(10, 0x7c9d7630, 4096, 0) = -1 EAGAIN (Resource temporarily unavailable)
recv(10, 0x7c9d7630, 4096, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=10, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=10, revents=POLLOUT}])
writev(10, [{"\215\5\1\0", 4}, {NULL, 0}, {"", 0}], 3) = 4
poll([{fd=10, events=POLLIN}], 1, -1) = 1 ([{fd=10, revents=POLLIN}])
recv(10, "\1\0k\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096, 0) = 32
recv(10, 0x7c9d7630, 4096, 0) = -1 EAGAIN (Resource temporarily unavailable)
recv(10, 0x7c9d7630, 4096, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=10, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=10, revents=POLLOUT}])
writev(10, [{"\24\0\6\0K\1\0\0\\\1\0\0\6\0\0\0\0\0\0\0\377\377\377\377", 24}, {NULL, 0}, {"", 0}], 3) = 24
poll([{fd=10, events=POLLIN}], 1, -1) = 1 ([{fd=10, revents=POLLIN}])
recv(10, "\1 l\0\20\0\0\0\6\0\0\0\0\0\0\0\20\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096, 0) = 96
recv(10, 0x7c9d7630, 4096, 0) = -1 EAGAIN (Resource temporarily unavailable)
recv(10, 0x7c9d7630, 4096, 0) = -1 EAGAIN (Resource temporarily unavailable)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 11
fstat64(11, {st_mode=S_IFREG|0644, st_size=203991, ...}) = 0
mmap2(NULL, 203991, PROT_READ, MAP_PRIVATE, 11, 0) = 0x7e3b2000
close(11) = 0
open("/usr/lib32/libXxf86vm.so.1", O_RDONLY|O_CLOEXEC) = 11
read(11, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\220\v\0\0004\0\0\0"..., 512) = 512
fstat64(11, {st_mode=S_IFREG|0755, st_size=17900, ...}) = 0
mmap2(NULL, 20704, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 11, 0) = 0x7e0cb000
mmap2(0x7e0cf000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 11, 0x3) = 0x7e0cf000
close(11) = 0
mprotect(0x7e0cf000, 4096, PROT_READ) = 0
munmap(0x7e3b2000, 203991) = 0
poll([{fd=10, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=10, revents=POLLOUT}])
writev(10, [{"b\0\10\0\30\0\0\0", 8}, {"XFree86-VidModeExtension", 24}, {"", 0}], 3) = 32
poll([{fd=10, events=POLLIN}], 1, -1) = 1 ([{fd=10, revents=POLLIN}])
recv(10, "\1\0m\0\0\0\0\0\1\227\0\240\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096, 0) = 32
recv(10, 0x7c9d7630, 4096, 0) = -1 EAGAIN (Resource temporarily unavailable)
recv(10, 0x7c9d7630, 4096, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=10, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=10, revents=POLLOUT}])
writev(10, [{"\227\0\1\0", 4}, {NULL, 0}, {"", 0}], 3) = 4
poll([{fd=10, events=POLLIN}], 1, -1) = 1 ([{fd=10, revents=POLLIN}])
recv(10, "\1\0n\0\0\0\0\0\2\0\2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096, 0) = 32
recv(10, 0x7c9d7630, 4096, 0) = -1 EAGAIN (Resource temporarily unavailable)
recv(10, 0x7c9d7630, 4096, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=10, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=10, revents=POLLOUT}])
writev(10, [{"\227\16\2\0\2\0\2\0\227\23\2\0\0\0\0\0", 16}, {NULL, 0}, {"", 0}], 3) = 16
poll([{fd=10, events=POLLIN}], 1, -1) = 1 ([{fd=10, revents=POLLIN|POLLHUP}])
--- SIGHUP {si_signo=SIGHUP, si_code=SI_USER, si_pid=10399, si_uid=0} ---
+++ killed by SIGHUP +++
Last edited by Darkimmortal (2013-01-06 19:49:50)

DSpider wrote:
Darkimmortal wrote:Have confirmed it's not filesystem corruption - fsck'd all partitions and reinstalled wine and all X related packages
Move/rename or delete "~/.wine" and see if it helps.
Still doesn't work
I should add that wine works correctly under the same X environment (well, same configs but not same Xorg.conf) running through 'vncserver' - it's just the GPU-accelerated environment started via 'startx' that I'm having trouble with
Last edited by Darkimmortal (2013-01-07 16:14:01)

Windows Forms Application Crashes Out with "Faulting module name: clr.dll"

OS: Windows 7
Framework: 4.5
Windows Form Application crashes while invoking printer settings method "printersettings.sethdevmode()"
Application: DHSDEVASystem.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
Stack:
 at System.Runtime.InteropServices.Marshal.CopyToManaged(IntPtr, System.Object, Int32, Int32)
 at System.Runtime.InteropServices.Marshal.Copy(IntPtr, Byte[], Int32, Int32)
 at System.Drawing.Printing.PrinterSettings.SetHdevmode(IntPtr)
 at DHSPresentationLayer.Logic.PrinterAPI.OpenPrinterPropertiesDialog(System.Drawing.Printing.PrinterSettings, System.Windows.Forms.Form)
 at DHSPresentationLayer.Logic.PrinterAPI.SendFileToPrinter(DHSPresentationLayer.Logic.PrinterInfo, System.String, System.Windows.Forms.Form)
 at DHSPresentationLayer.Logic.PrinterAPI.PrintLabel(System.String, System.String, System.Data.DataTable, System.Func`2<System.String,System.String>, System.String, System.String, Int32, System.Windows.Forms.Form)
 at DHSPresentationLayer.MRPFR130.showSSReport()
 at DHSPresentationLayer.MRPFR130.confirmCancelCloseButton_Confirm()
 at MINDBaseFormLibrary.BaseScreenReports.confirmCancelCloseControl1_EventButtonClicked(System.Object, DHSControlLibrary.MyEventArgs)
 at DHSControlLibrary.ConfirmCancelCloseControl.OnEventButtonClicked(DHSControlLibrary.MyEventArgs)
 at DHSControlLibrary.ConfirmCancelCloseControl.cmdConfirm_Click(System.Object, System.EventArgs)
 at System.Windows.Forms.Control.OnClick(System.EventArgs)
 at Infragistics.Win.Misc.UltraButtonBase.OnClick(System.EventArgs)
 at Infragistics.Win.Misc.UltraButton.OnMouseUp(System.Windows.Forms.MouseEventArgs)
 at System.Windows.Forms.Control.WmMouseUp(System.Windows.Forms.Message ByRef, System.Windows.Forms.MouseButtons, Int32)
 at System.Windows.Forms.Control.WndProc(System.Windows.Forms.Message ByRef)
 at System.Windows.Forms.Control+ControlNativeWindow.OnMessage(System.Windows.Forms.Message ByRef)
 at System.Windows.Forms.Control+ControlNativeWindow.WndProc(System.Windows.Forms.Message ByRef)
 at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
 at System.Windows.Forms.NativeWindow.DefWndProc(System.Windows.Forms.Message ByRef)
 at Infragistics.Win.UIAutomation.UiaProviderControlNativeWindow.WndProc(System.Windows.Forms.Message ByRef)
 at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
 at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
 at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
 at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
 at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
 at System.Windows.Forms.Application.Run(System.Windows.Forms.Form)
 at DHSPresentationLayer.Program.Main()
then 1 second after :
Faulting application name: DHSDEVASystem.exe, version: 7.8.0.4, time stamp: 0x54c8f680
Faulting module name: MSVCR110_CLR0400.dll, version: 11.0.50709.17929, time stamp: 0x4ffa580c
Exception code: 0xc0000005
Fault offset: 0x0000156e
Faulting process id: 0x8ec
Faulting application start time: 0x01d046916142e1e3
Faulting application path: C:\Users\savaa\AppData\Local\Apps\2.0\DR9VMJ96.MZ3\DP07HVCX.MDB\dhsd..tion_0000000000000000_0007.0008_cfa90b0813b3f063\DHSDEVASystem.exe
Faulting module path: C:\Windows\system32\MSVCR110_CLR0400.dll
Report Id: 38cf9363-b285-11e4-b29f-0023242a2561
The PC is on windows 7 32 bits with .net 4.5 installed.

Hello,
Based on the exception message, I found that your project is build with .NET 4.0, you could consider changing it to .NET 4.5.
If you want to keep it built with .NET 4.0, then you could consider the following fix.
FIX: "Faulting module name: clr.dll" error message when you run a Microsoft .NET Framework 4-based application
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

No HDMI out S12 on Win XP

For some uknown reason, Lenovo power manangement displays every "Fn" combination except for Fn+F3, i.e. HDMI-out option.
Latest ION/Nforce/Lenovo power management drivers are installed.
I would appreciate any advice!

try windows + p

I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

Hi Guys
Updated my 2 imacs to Maverick yesterday. Schoolboy error on my part not checking if there were problems with any programmes before I did.
Quark is now a nightmare with no short term answer on the way. As a Quark user for over 20 years this is just another reason to hold your hands up and say OK Indesign you win I will have to learn how to use you and Quark will be a distant memory.
I am told there will probably be no solution to getting quak 9 running on Maverick and that you will need to update to 10 in about 2-3 weeks to get back to normal. Having spent a few bob on 2 versions of 9.5 only in Feb this year i didn't really want to upgrade yet.
So its cough up to carry on using Quark or learn Indesign.
I have lost faith in Quark as they are quick to send me e-mails asking me to upgrade to this and that version, why didn't they send one out saying do not upgrade to Maverick. Perhaps they know there loyal follwing will uograde to 10 and will generate a nice little bonus before Xmas.
Lots to do today and will now take 10 times longer to do it. Is this 2013 or 1974!!!!!
If anyone hears of a solution please post ASAP

Application crashes when using JNI with Jdk 1,2, 1.3 and 1.4

Hi!
I have this application that has a GUI written in Java and a file parser written in C. JNI is used to connect these parts together. The problem is that the application only works when I am using jdk 1.1.8 but not when using jdk1.2, jdk1.3 or jdk1.4. I am running the application on a Solaris 8 machine.
I have not written the application myself but I am going to be working with it from now on. But I have today little knowledge with JNI and I have tried different approaches to solve the problem. For example I have tried to used DDD together with GDB to find out what the problem is but with no luck. When I run the application using jdk1.4 I get the following error when the JVM crashes:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 10 occurred at PC=0xFA023164
Function=Java_Bitmap_setDebug+0x1C
Library=/usr/u/lal/micview/micview2_1_0_beta1/libBitmapImpl.so
Current Java thread:
at Bitmap.setDebug(Native Method)
at DisplayPanel.loadFile(DisplayPanel.java:396)
at MicPlot.loadFile(MicPlot.java:1452)
at MicPlot.loadFile(MicPlot.java:1441)
at MicPlot.miOpen_Action(MicPlot.java:1267)
at MicPlot$SymAction.actionPerformed(MicPlot.java:1184)
at java.awt.MenuItem.processActionEvent(MenuItem.java:588)
at java.awt.MenuItem.processEvent(MenuItem.java:548)
at java.awt.MenuComponent.dispatchEventImpl(MenuComponent.java:285)
at java.awt.MenuComponent.dispatchEvent(MenuComponent.java:273)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:452)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
Dynamic libraries:
0x10000 /opt/java/jdk1.4/bin/java
0xff360000 /usr/lib/libthread.so.1
0xff3a0000 /usr/lib/libdl.so.1
0xff280000 /usr/lib/libc.so.1
0xff270000 /usr/platform/SUNW,Ultra-4/lib/libc_psr.so.1
0xfe000000 /opt/java/j2sdk1.4.1/jre/lib/sparc/client/libjvm.so
0xff220000 /usr/lib/libCrun.so.1
0xff200000 /usr/lib/libsocket.so.1
0xff100000 /usr/lib/libnsl.so.1
0xff1d0000 /usr/lib/libm.so.1
0xff250000 /usr/lib/libw.so.1
0xff0e0000 /usr/lib/libmp.so.2
0xff0b0000 /opt/java/j2sdk1.4.1/jre/lib/sparc/native_threads/libhpi.so
0xff080000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libverify.so
0xff030000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libjava.so
0xfe7e0000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libzip.so
0xfe4e0000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
0xedd00000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libawt.so
0xfc480000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libmlib_image.so
0xfc410000 /opt/java/j2sdk1.4.1/jre/lib/sparc/motif21/libmawt.so
0xeda80000 /usr/dt/lib/libXm.so.4
0xfa090000 /usr/openwin/lib/libXt.so.4
0xfa3d0000 /usr/openwin/lib/libXext.so.0
0xfc7e0000 /usr/openwin/lib/libXtst.so.1
0xed980000 /usr/openwin/lib/libX11.so.4
0xfa2a0000 /usr/openwin/lib/libdps.so.5
0xfa3b0000 /usr/openwin/lib/libSM.so.6
0xfa1d0000 /usr/openwin/lib/libICE.so.6
0xed880000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libfontmanager.so
0xfa390000 /usr/openwin/lib/locale/common/xlibi18n.so.2
0xfa1b0000 /usr/openwin/lib/locale/iso8859-1/xomEuro.so.2
0xfa190000 /usr/lib//liblayout.so
0xfa050000 /usr/openwin/lib/locale/common/ximlocal.so.2
0xfa010000 /usr/u/lal/micview/micview2_1_0_beta1/libBitmapImpl.so
Local Time = Thu Oct 3 13:32:47 2002
Elapsed Time = 35
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1-beta-b14 mixed mode)
# An error report file has been saved as hs_err_pid27692.log.
# Please refer to the file for further information.
Abort
From this information I think that the problem should be in the native method setDebug. But I have tried to set a breakpoint at the beginning of that function in the C part but with no luck. The application crashes before it reaches that position in the C file.
What could possibly go wrong between the setDebug function in the C part and the function call in the Java part?
When using GDB, GDB cannot figure out what is wrong it just returns a hex address, no function name.
I would really appreciate some help. I have tried everything that I can come up with!
Best regards
Lars

I have figured out that the application fails on its first call to the native methods.
So I have this Bitmap class that contains all the native calls and it is defined shortly as follow:
public class Bitmap {
static {
System.loadLibrary("BitmapImpl");
native void setDebug(int debuglevel, int statistics);
There are many more native methods defined in Bitmap, but I only show the setDebug method because that is the first one that is executed and also the one that immediately fails.
My setDebug C function is defined as follow in BitmapImpl.c
#include <time.h>
#include <stdio.h>
#include <limits.h>
#include <fcntl.h>
#include <jni.h>
#include <math.h>
#include <errno.h>
#include "Bitmap.h"
#include "data.h"
jint debug = 0;
jint statistics = 1;
JNIEXPORT void JNICALL Java_Bitmap_setDebug
(JNIEnv *jenv, jobject jo, jint d, jint s)
debug = d;
statistics = s;
My libBitmapImpl.so file is compiled using the following Makefile and using GNU gcc:
JAVAPATH=$(JAVAINCLUDEPATH)
LMACRO=-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DSOLARIS
CSOURCE=BitmapImpl.c
all:
gcc -O3 -G $(LMACRO) -I$(JAVAPATH) -I$(JAVAPATH)/solaris \
$(CSOURCE) -o libBitmapImpl.so
It is still a total mystory why the application fails. I have tried it on a RedHat Linux machine and there it works fine. But not on Solaris. Only if I use the jdk1.1.8 but not a later one.
Would really appreiciate some help!
Best regards
Lars

I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Powerbuilder application crashes after upgrade to 12.5.2 (build 5006)

I have already seen few similar posts on this forum for similar issue. However, I feel mine is different from those and could be some basic steps am missing. Thanks in advance for any comments.
We are evaluating the effort and benefits of migrating our PB 10.2.1 (build 9731) application to PB 12.5 Classic. After downloading the trial version from the SAP site, I could migrate the application easily with only a handful of warnings. However, while running the application either from build (EXE) or from IDE, it crashes (windows application failure) frequently. In addition to that, few of our application screens opens as blank screen (doesn’t display anything in the DW attached).
My operating system is Windows 7 (32 bit) Service Pack 1. The application has many calls external DLLs (both windows standard and custom), as samples at the bottom. I believe that the correct (from PB 12.5) DLLs are copied to Powerbuilder home directory (C:\Software\Sybase\PowerBuilder 12.5 & C:\Software\Sybase\Shared\PowerBuilder) and the source code directory in my attempt to ensure that there are no issues with DLLs. However, initially I had installed powerbuilder 12.5 also under the same root as Power builder 10.0, but as I read few posts that DLLs from different version residing in same place can cause issues, uninstalled and installed PB 12.5 on different location.
Our PB application also interact with the .Net modules of the application by communicating through a custom DLL. However, that seems still working and I am able to open the .Net screens from the migrated application.
Below are the main scenarios in which the application crashes and every time I get a DLL error as given below.
1. While running the application from IDE and selecting ‘Exit’ from the main window. This will close any instantiated objects and close the mutex by calling the windows API.
function ulong CreateMutexA(ulong lpMutexAttributes, boolean bInitialOwner, ref string lpName) library "kernel32.dll" alias for "CreateMutexW" function ulong GetLastError() library "kernel32.dll" alias for "GetLastError;Ansi"
function ulong CloseHandle(ulong hMutex) library "kernel32.dll" alias for "CloseHandle;Ansi"
This will result in the below crash.
Faulting application name: PB125.EXE, version: 12.5.2.5006, time stamp: 0x50f93412
Faulting module name: kernel32.dll, version: 6.1.7601.17932, time stamp: 0x503275b9
Exception code: 0xc0000005 Fault offset: 0x0004c372
Faulting process id: 0x2bdc
Faulting application start time: 0x01cf3e72371227c9
Faulting application path: C:\Software\Sybase\PowerBuilder 12.5\PB125.EXE
Faulting module path: C:\Windows\system32\kernel32.dll
Report Id: 8feef8fc-aa65-11e3-8049-f500274aecdc
2. Opening of certain windows results in the below crash. If I try to debug the code and move mouse over the line of code being executed, then also I get the same crash. I don’t do the mouse move then I can proceed with the same line, however it will crash at a later line calling ‘classname’.
Problem Event Name: APPCRASH
Application Name: PB125.EXE
Application Version: 12.5.2.5006
Application Timestamp: 50f93412
Fault Module Name: PBVM125.dll
Fault Module Version: 12.5.2.5006
Fault Module Timestamp: 50f93437
Exception Code: c0000005
Exception Offset: 00175357
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 3081
Additional Information 1: 38ca
Additional Information 2: 38ca6ad0537dbd0555785bd862b8e94f
Additional Information 3: 0cd5
Additional Information 4: 0cd54a5b6672f15bf2ca366539d89c12
3. Few of the application screen opens but doesn’t display the datawindow attached to it.

... many calls external DLLs (both windows standard and custom),
You have a very complex application and it is unlikely that you will receive much help in this type of setting. As Chris has already pointed out, previous efforts appear to have been done in a sloppy manner; something indicated by the ANSI qualifiers on API functions that are not needed or relevant. In addition, the PB alias of CreateMutexA for the API function CreateMutexW is also suggestive.
I believe that the correct (from PB 12.5) DLLs are copied to Powerbuilder home directory (C:\Software\Sybase\PowerBuilder 12.5 & C:\Software\Sybase\Shared\PowerBuilder)
You should be very very careful about doing things like this. One should not simply scatter DLLs across directories without very good reasons as it often leads to strange problems. On a machine with the IDE installed, you should allow PB to install everything where it wants them. Copying or moving files is something done as a last resort - it is certainly something that you need to document in case you need to undo it or redo it at a later time.
Lastly, you might reconsider attempting this with the trial version. I don't how "current" the trial version is but I suspect it might be a bit buggier than the most current maintenance build. I'm guessing that you will have to do a bit more than recompiling to get the functionality related to "opening .Net screens" working. It might help to try creating a new application and put in some basic functionality to interact with all of these external processes, screens, dlls, etc since I suspect this is where the bulk of your problems exist.

Adobe Premiere Elements 11 Application Crash

Operating System: Windows 8 Pro 64-bit
System Model: HP Pavilion dv7 Notebook PC
BIOS: InsydeH2O Version 03.60.48F.1B
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (8 CPUs), ~2.2GHz
Memory: 16384MB RAM
Available OS Memory: 16332MB RAM
Page File: 2657MB used, 30058MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 11
Card name: Intel(R) HD Graphics 3000
Speakers and Headphones (IDT High Definition Audio CODEC)
750GB Integrated Hard Disk Drive
3TB External Hard Disk Drive
While editing a 30:44 minute avi video file with 3 wav audio source files in Premiere Elements 11 the application crashes, no system errors or system crashes.
Windows reports that Premiere Elements 11 crashes and closes the program, no error message.
The crash occurs around the five minute marker of the video, I do not want to go past the 5 minute marker because I want to make sure my video is well throughout.
The video file is 28.8GB and both the video file and the Premiere Project File are located in the same 3TB External Hard Disk Drive.
The only programs running while I edit are Steam, Trend Micro Titanium Antivirus+, Dxtory, and Premiere Elements 11.
I have read over some of the other forums regarding premiere crashing and MOST of the ones that were relevent to my inquiry are from 2008-10 and involve premiere 8 on Windows Vista. This is prevelent on both Adobe and Google.
I have also ran a disk cleanup, disk defrag, system restart, and update checks, all updates are up to date, I check every month.

I only have the single 30:44 duration video.
I also downloaded G-Spot, from a suggestion made by Bill Hunt in an older post on the forum to find out the specific codecs that were involved in the video I am editing and what I received back was:
Under Video, the codec was listed as 'xtor'.
Under Audio, the codec was listed as 'PCM Audio'
The only video file in the edit is the 30:44 duration video file.
I used a recording software that I purchased called Dxtory, the program allows me to record certain programs on my computer's screen, namely video games.
The video's format is an AVI file, and the specific video codec is 'xtor' and the specific audio codec is 'PCM Audio', according to G-spot.
The video's resolution is 1280x720, the resolution is what I set my games to, if available, and its the resolution I have Dxtory setup to record.
Under Edit/Project Settings/General the project settings are set to 1080i, 1920x1080 resolution, on default.
I cannot change the settings for some reason, they are unavailable for me to customize, probably cause its the default until I add a video file.
However, when I open the 30:44 video project, the Edit/Project Settings/General settings are set to Sony XD Cam EX 720p, 1280x720. I do see a yellow line under the time line in the project, the line is not exactly above the video clips. I am also in Expert View.
My time line has changed increments, last night when I posted my first post, the time table was in increments of 22 seconds, and now its in increments of 15 seconds, the yellow line is below these increments, but only in certain parts, for my project the yellow line appears in the time table in the first 1 minutes 51 second and later at 4 minute 36 second increment to 4 minute 47 second increment. I do not have an edit on the first 1:51, but on the 4:36-4:47 I do have a text edit that sits on video 2, that was the last edit I did on the project, the application shortly crashes after 4:47, the crash is also occuring with and without the text edit. I'm going to continue to check settings and I will use Windows Event Viewer to find if I missed anything.
Thank you for your asssistance.

IPod Application Crashes after 2.1 Update

Did the 2.1 update this morning and everything seemed to go fine. Then I checked out mail, contacts, clock, third-party apps, etc. and they all worked just fine. Then I tapped the orange iPod icon and the splash screen appears, then goes black and back to the Home page. A classic application crash.
Did a hard reset (twice), synced twice, called Apple, they never heard of that kind of crash yet, and suggested a total restore (of course).
Any other similar crashes? I'm hoping this is widespread and will be solved with an update rather than spending the next hour doing a restore and backup and then having the same problem with 2.1.

This guy found the bug!
http://discussions.apple.com/messageview.jspa?messageID=8071675

'Your system has run out of application memory'?!

I've seen many users experiencing this same problem throughout the community, but none of the fixes have given me a permanent solution. Details of the machine are below, as well as what happens when the problem hits/triggers.
MBP Retina running OS X Yosemite 10.10.2 (occurred in previous versions as well, thought the latest update would help but it didn't)
15-Inches Mid 2014 with 16 GB of Ram
Been using this Mac for good 6 months now, and one fine day of normal usage the whole system seems really laggy and slow and all of a sudden i'm unable to access anything and barely move my mouse. Then, a window pops out, telling me "Your system has run out of application memory", gracefully showing me that I have to force quit all my programmes for me to just stare at my desktop in utter disappointment.
I've been using Yosemite for awhile now (updated few days since the release) and haven't encountered any major issues, this being the first. Reading through many threads many have said that the problem lies with opening the Mail app, yet I haven't touched that app in months. I've also tried resetting the PRAM on my machine when it happens and the problem comes back again after several minutes of normal usage (iTunes, App Store). Checking the memory usage with the Memory Clean app, it tells me I'm down to a measly '15.58 MB' of memory, and it justfluctuates at that until I give it a restart again. This can't keep happening - I can barely use the Mac for 10 minutes without having to restart it, only to be able to use it only again for another 10 minutes.
Opening Activity Monitor tells me that mds_stores is the main root of the problem, yet I can't seem to shut the process down. I've googled and many say that mds_stores is spotlight indexing, but taking up all 16 GB of ram? That shouldn't be the case. Is there a fix to this? Does Apple know of its existence?
Included some screenshots below:

Step 1
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -F '$Time $Message' -k Sender mdworker -o -k Message Rne Norm -k Sender mds | tail | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.
Step 2
Enter the following command as in Step 1 and post the output:
mdutil -as 2>&- | pbcopy
You can then quit Terminal.
Step 3
Launch the Console application in the same way you launched Terminal. In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash reports related to Spotlight. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. A Spotlight crash report has a name beginning in "mds" or "mdworker" and ending in ".crash". Select the most recent such report, if any, from the System and User subcategories and post the entire contents—the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post any other kind of diagnostic report, such as hang logs—they're very long and not helpful.

OS X 10.5.6 CS4 Premiere Pro CONFLICT with VST plugins? Application CRASH

Hi everybody, just tried to run the trial of premiere cs4. the application crashes on startup without even completing the initialization. instead a bug report comes up while the program scans the installed units / vsts-plugins that are already on my system (MBP 2years old, 4GB RAM). i have several vst-instruments installed for use with logic. what i figured out is: if i move my folder <harddisk>/library/audio/plug-ins/vst - folder (so premiere does not find the vst-plugs) the program works just fine. so my questions: 1. can i manually set a different folder for premiere to scan for plugins? o obviously do NOT want to move that folder back and forth every time i switch between premiere and audio-applications 2. is there a way to make premiere "understand" my vst-plugs (such as massive etc.) HAS ANY OF YOU EXPERIENCED THE SAME / ANY HINTS? I am really looking forward to your ideas - thank you very much in advance!

Superb, thanks a lot.
What I addionally tried (and it worked in most of the cases) is to move all vst plugs into a different folder and then replace one by one. the ones who force the crash go to trash (incl. ALL files on your system --> http://www.native-instruments.com/index.php?id=niosxtut2&L=2) and reinstall AFTER CS4 HAS BEEN INSTALLED. obviously the "rank" is important.
my probs are solved, thank you!

My macbook pro with 16GB ram runs out of application cache very often, and only application running is FIREFOX MOZILLA. How to fix this?

This happens 2 or 3 times a day - every couple of hours. Then, I need to restart the laptop and clean out files (I use ccleaner). Is there a way to fix this ( system running out of application cache). Thought 16 GB ram would be big enough. Thanks for your help.

For some time now, a lot of Mac’s with Microsoft programs have been
crashing. Check with Microsoft / Mac support sites.
What add-ons are you using?
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?

AIR application crashes at certain point in windows vista

Hi Dudes,
I am facing a problem in Window vista. It always crash when we open the window component using Adobe AIR. I am creating the Dynamic window and adding the child component as window.rawChildren.addChild(object) like this.. we made the setup , it is running perfect in all OS except Windows vista 32/64 bit.
When we work with our AIR application in conjunction with our own h/w product(Tablet Driver).[without connection of Tablet slate with PC it works fine but with it not].
S/w Details:- AIR Installer above 2 and SDK above 2.
OS- Win-Vista 32/64 bit.
AIR application crashes at certain point and shows the error like:-
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             GTMP.exe
Application Version:                           0.0.0.0
Application Timestamp:                     4bde2f02
Fault Module Name:                          Adobe AIR.dll
Fault Module Version:                        3.1.0.4880
Fault Module Timestamp:                  4eb760e8
Exception Code:                                  c0000005
Exception Offset:                                003ca9be
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             2057
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I found one more error in debugging mode..the Alert message is
Microsoft Visual C++ Runtime Library
R6025 -
pure virtual function Call.
As per my view it is about some .dll and .CPL file makes some issues with AIR Frameworks is it? !!!!..
Please give some ideas to resolve it.
by
Beerahamedkhan

Could you try this against the released 3.2 version of AIR and our 3.3 beta to see if it still occurs? If so, please open a new bug report on this over at bugbase.adobe.com? Include any sample code or application to help us easily reproduce the problem. If you'd like to keep your code private, please feel free to send it to me directly at [email protected] In addition, if you can give us a .dmp of this crash it could be very helpful.
Please post back with the URL so that others affected can add their comments and votes.

Virtualgl/bumblebee + HDMI out + wine = application crash

Similar Messages

Maybe you are looking for