Visio Drawing Using Data Graphics with data that has a field that contains Multiple Values.

I am working on creating a drawing for SMTP connectors.  I decided I would use a Data Graphic connecting to a spreadsheet.  In the spreadsheet there are a few fields that are Multi-Value fields.  For instance SmartHosts contains multiple Ip
address.  I am trying to get this to format things so that the IPs show on the next line down instead of continuing on the same line until it wraps. 
Does anyone know a way I could do this?
Jeff C

Hi Jeff,
Arrange the IP values in spreadsheet using Alt+Enter (Use this key pair as a separator between two IP values). Now link this spread sheet to Visio. The values should appear in the same manner in data graphics as your expectation.
Let me know if you meant something else.
Thanks,
Dheeraj 

Similar Messages

  • Group messaging not working with groups that contain non iphone users

    I have an Iphone 5 and for some reason I can't send/receive group messages with groups that contain non Iphone users.  Basically I recieve single text messages/imessage from each person who responds to the group message.  This is incredibly annoying.

    Hello, megbu36. 
    Thank you for visiting Apple Support Communities.
    Check to make sure that group messaging is enabled.  Go to Settings > Messages and turn on Group messaging.
    iOS: Understanding group messaging
    http://support.apple.com/kb/HT5760
    Cheers,
    Jason H.

  • Problem retrieving data that contains special characters in Collections

    Hi fellow Apexers,
    If I load strings that contain characters such as ":" or "," into a collection and then read the data back off the collection into page items via URL e.g.
    f?p=&APP_ID.:4:&SESSION.::&DEBUG.::P4_INJURED_FIRST_NAME,P4_INJURED_OTHER_NAME,P4_INJURED_SURNAME,P4_INJURED_SHOP_NO,P4_INJURED_BUILDING,: #SEQ_ID#,#C001#,#C002#,#C003#,#C004#,#C005#
    the data after the ":" or "," gets screwed up and ends up in the wrong fields. How do I escape these characters?
    I have tried using a replace statement when inserting into the collection e.g.
    BEGIN
    IF htmldb_collection.collection_exists('INJURED_PERSON') = FALSE THEN
    htmldb_collection.create_collection( p_collection_name => 'INJURED_PERSON');
    htmldb_collection.add_member(p_collection_name => 'INJURED_PERSON',
    p_C001 => :P4_INJURED_FIRST_NAME,
    p_C002 => :P4_INJURED_OTHER_NAME,
    p_C003 => :P4_INJURED_SURNAME,
    p_C004 => :P4_INJURED_SHOP_NO,
    p_C005 => replace(:P4_INJURED_BUILDING,':','')
    etc.........
    but I just don't want to have nested replace statements. Also I'll loose "," and ":" when I retrieve the back off the collection
    Does anyone know of a better workaround?
    Regards
    Paul P

    Hi Paul,
    Apex uses colons in the url to separate the parameters. You could replace these with another character (for example, ~) and then have a Before Header page process on the second page that converts that back again.
    However, as a collection is available until you clear it or log out, you could just pass the SEQ_ID and get the second page to retrieve the values directly into the page items
    Andy

  • How to use data of multiline element from workflow container

    Hi,
    Can you please tell me how to access rows of multiline element of workflow container.
    Scenario is like below.
    I have values in a multiline container(table) of workflow container.
    Now inside Fork branches  i need to check for specific data in the above table and with that condition i have to send workitem.
    I hope u can understand,otherwise please revert.
    Thanks in advance,
    Madhu

    You cannot didrectly check the condition...
    what you have to do is.. write a inside the method as below and set the flag...and use the flag in condition editor...
    SWC_GET_TABLE CONTAINER 'AGENTS'  lt_agents.
    loop at lt_agents ino wa_agents.
    if wa_agents = 'A'.
    lv_flag = X.
    endif.
    endloop.
    SWC_SET_ELEMENT CONTAINER 'FLAG' lv_flag.
    Create an export parameter FLAG as char1 with export marked.
    Do the neccesary bindings from task to workflow.
    Then in workflow check this flag in condition editor.

  • Searching Web Apps with Data Source fields containing multiple values

    I have a Web App with a field allowing multiple values to be entered similar to the checkbox list. I need to restrict allowed values to a large, finite list of values currently stored in another Web App as the data source. I can't apply the Data Source field type as that only allows single value selection. I also need to be able to use the Web App Search form to search for items containing 1 OR more values in this field (the search functionality of a checklist field type). Here's what I've tried for field types:
    Text (string) or Text (multiline) field type - By saving a list of comma separated values (the same way that checkbox list outputs) to a text input or textarea, the search logic only searches for exact string (including commas) and doesn't parse the individual values.
    List (checkbox list) field type - This allows me to search multiple values using OR logic, but the web app will only store values that have been entered as options in the actual web app field setup. I tried using a checkbox list with minimal or empty options hoping that whatever values I sent over in a comma separated string value would still get stored, but because the values came from my Web App data source and not the list of options stored with the field, they were not saved.
    Has anyone found a way to do this?
    My other question is about how I might use a similar multi-value field as described above but return search results containing items with ALL selected values for that field (AND logic).
    Can anyone enlighten me to the inner workings of BC web app search logic?

    Thanks Robert.
    You'll need to create your own interface to the webapp database for those kind of data operations
    by this, are you speaking of the internal BC database which stores web app schema data? That would be great if it were possible to update that programmatically because I need to use the List (Checkbox List) field type (for the search functionality), but I need to supply the checkbox options from a web app rather than by manually updating the list entered in the Fields view of the web app settings (shown below).
    I'm curious if anyone else has tried this?
    Again, my reason for needing to use the List (Checkbox List) field type is that the page which processes searches knows to expect a comma separated list for this field type and then appears to be parsing out the individual values for searching out web app items with 1 or more matching values. You're right that text fields (string and multiline) just check for 'string contains' matches, and this would be ok if I was only ever needing to search just one value at a time. Here's an example of what I might do:
    Web App item field value (as recorded against the List (Checkbox List) field type:
    8294877,8294878
    Web App Search value (for this same field):
    8294879,8294877,8294885
    The search would return this web app item because the field contains 2 (1 or more) individual values even though they were entered into the search field in a different order. If this web app item were just a Text (string or multiline) field, the searched value is not a substring of the web app item's stored value, so it would not find a match. Hence the need to use Checkbox List field type.
    The web app will have thousands if not 10s of thousands of records, so dumping them all into one big array or object and searching on the front-end won't be practical (though it works great on smaller datasets).

  • I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.

    My phone doesn't have any cellular phone functions...but it CAN send text messages and access data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, the last two have this problem and the first stopped working all together. I've had new sim cards put in, ive done hard resets on the phone, i've rebooted the phone, done battery pulls, and tech support has reset the signal to my phone. Nothing has worked. (I just "upgraded" <- lol.... and my old phone IS turned off.)

    Im in 79707. So to recap my whole case: I upgraded my device using the verizon wireless website. I received my phone and switched my old SIM card from my Droid Razr Maxx HD into the new Galaxy S5. Everything worked fine until the next morning (May 31st) when I woke up and the phone wouldn't turn on. I took the phone to the local Verizon store and they were also unable to turn it on. They issued me a new Galaxy S5 (referred to as phone 2) and switched my SIM card into that one.
    With PHONE 2 i was able to make calls and receive calls, along with text and data for approximately four hours. After that, i was unable to use the phone function of the device, but text and data were still functioning. I took PHONE 2 back to the Verizon store where they attempted to hard reset the phone twice, they also installed two new SIM cards at the store. After this they would get the same error, which is the phone just reading "Dialing..." after attempting to make a call. The Verizon associate declared the phone "DOA" and issued me another Galaxy S5 (referred to as PHONE 3).
    PHONE 3 worked well, with phone text and data featured intact from when I received it on the after noon of the 31st until approximately 2:30PM on June 1st. I contacted Verizon Tech Support via Gmail phone to attempt the correct the problem. They reset the connection, had me do a battery pull, had me close the "phone" application, and erase the data and catche, then restart the phone. All of which had no effect. My phone is still able to receive texts and use data (even with wifi off) it simply cannot make or take phone calls. all it says is "dialing..." when I attempt to make a call. When other phones call my device it rings once on their end and directs them to voicemail, PHONE 3 does not ring on my end.
    I have made sure my old phone is completely powered down.

  • Draw inside movieclip/graphic with Actionscript

    Hi.
    How I can draw inside movieclip/graphic element with Actionscript?
    If i have example movieclip-element in my project and want to draw a single dot in its coordinate (10,10), how I can do that?
    ty m8s!

    The easiest way to draw inside a movieClip is the graphics class.
    You could do something like:
    this.graphics.lineStyle(1, 0x000000);
    this.graphics.moveTo(10, 10);
    this.graphics.lineTo(11, 11);
    This isn't perfect when drawing pixels, however - it only has methods for lines and shapes(circles, rectangles etc).
    If its important for you to draw a single pixel and accuracy is more important you may want to consider converting your Movieclip to a BitmapData class, which has methods for setting Pixels. Realistically though, if you didn't know about the graphics class, then that'll probably be what you're after.

  • Regex with strings that contain non-latin chars

    I am having difficulty with a regex when testing for words that contain non-latin characters (specifcally Japanese, I haven't tested other scripts).
    My code:
    keyword = StringUtil.trim(keyword);
    //if(keywords.indexOf(keyword) == -1)
    regex = new RegExp("\\b"+keyword+"\\s*;","i");
    if(!regex.test(keywords))
    {Alert.show('"'+keywords+'" does not contain "'+keyword+'"'); keywords += keyword + "; ";}
    Where keyword is
    日本国
    and keywords is
    Chion-in; 知恩院; Lily Pond; Bridge; 納骨堂; Nōkotsu-dō; Asia; Japan; 日本国; Nihon-koku; Kansai region; 関西地方; Kansai-chihō; Kyoto Prefecture; 京都府; Kyōto-fu; Kyoto; Higashiyama-ku; 東山区; Places;
    When the function is run, it will alert that keywords does not contain keyword, even though it does:
    "Chion-in; 知恩院; Lily Pond; Bridge; 納骨堂; Nōkotsu-dō; Asia; Japan; 日本国; Nihon-koku; Kansai region; 関西地方; Kansai-chihō; Kyoto Prefecture; 京都府; Kyōto-fu; Kyoto; Higashiyama-ku; 東山区; Places; " does not contain "日本国"
    Previously I was using indexOf, which doesn't have this problem, but I can't use that since it doesn't match the whole word.
    Is this a problem with my regex, is there a modifier I need to add to enable unicode support or something?
    Thanks
    Dave

    ogre11 wrote:
    > I need to use refind to deal with strings containing
    accented characters like
    > ?itt? l?su, but it doesn't seem to find them. Also when
    using it with cyrillic
    > characters , it won't find individual characters, but if
    I test for [\w] it'll
    > work.
    works fine for me using unicode data:
    <cfprocessingdirective pageencoding="utf-8">
    <cfscript>
    t="Tá mé in ann gloine a ithe;
    Nà chuireann sé isteach nó amach
    orm";
    s="á";
    writeoutput("search:=#t#<br>for:=#s#<br>found
    at:=#reFind(s,t,1,false)#");
    </cfscript>
    what's the encoding for your data?

  • Can we change the data type of a field based on the value of the field

    HI Gurus,
    My Requirement is as below -- Could you please guide me
    in the Printable Adobe form -- for ex - as usual for dates fields in the Object Pallette the object type is a date/time field  and for quantity/currency fields corresponding fields are taken
    now in case the either the date, quantity or currency is initial in place of displaying 0.00 or empty date we need to display N/A (Not Applicable)
    for this I would like to change the data type of the field
    to put it simply --
    we need to change the data type of date field from DATE&TIME to Char type to hold N/A or  Quantity field to Char field to hold N/A
    how can we realize this in SAP adobe forms
    Thanks in Advace
    Ramchander Rao.K

    Hello Ramchander,
         You cannot change the data type of the field at run time in Adobe forms because the type of field you choose at the time of design level is associated with the data type itself.
    If you want to achieve your requirement, then your main idea should be to set the data type as CHARACTER itself while designing the field in the adobe form itself. CHAR field will comfortably hold the value of Calculation/amount field, Currency field, Amount, Date, Time HHMMSS, Unit Accuracy, Currency key, Floating point number, Numeric text, Client, Language and many other data types.
    After designing the field as TEXT field in Adobe form you have two options.
    Option 1:
    Select the Date field initially as type TEXT field or CHAR field in Adobe forms.
    Suppose the name of the field is TEXTFIELD1, then write the Javascript code on this field in Initialize event as below.
    if ( this.rawvalue == null )
         this.rawvalue = "N/A";
    If the field is not blank, then it will show the date. Else it will show "N/A".
    Option 2:
    Select the Date field initially as type TEXT field or CHAR field in Adobe forms. Do the formatting part in ABAP itself. It will increase the performance. Avoid Javascript as much as possible.
    Suppose you have a DATE variable l_dats of type DATS. Then take another variable l_date of type CHAR. Then write the below ABAP code.
    MOVE l_dats TO l_date.
    IF l_date IS INITIAL.
         l_date = 'N/A'.
    ENDIF.
    Bind the l_date to the TEXT field in the form.
    Even in this case, if the field is not blank, then it will show the date. Else it will show "N/A".
    But I will suggest you to use Option 2 of keeping the AMOUNT, QUANTITY, DATE, TIME fields etc as CHAR or TEXT fields in Adobe form and do the required formatting in ABAP itself.

  • Having issues with patches that require multiple reboots in a task sequence?

    Are you guys having issues doing a build and capture or deployment, while including the recent patches ?
    It looks like another patch is requiring multiple reboots which breaks the task sequence...
    Long story short... the last time I created a .Wim file was in June (with ZTIWindowsUpdate) - it included all the patches as of June 2014. This image has been deployed since then with no problem. All the other monthly patches (07/08/09/10/11/12/01) can be
    installed successfully through the deployment task sequence with no problem.
    Then last week, I decided to create a new .Wim file to include all the patches as of January 2015. In my build and capture step, it exits because one of the updates requires multiple reboot. I checked on the following website and it has not been updated
    since October 22nd : http://support.microsoft.com/kb/2894518
    Do any of you experiences issues with a WSUS that requires multiple reboot recently ?
    Thanks!

    As mentioned, the MDT offline updates task will do it. Add it to your build and capture and it will do the work for you using the updates in an update package that you've previously created. Alternatively, use a stand-alone instance of MDT to create your
    image (using a build and capture TS of course) -- this can then use a stand-alone instance of WSUS to install the updates into your image which you then import into ConfigMgr.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Cfdirectory action=list not working with directories that contain an ampersand

    Our IT group just upgraded one of the our file share servers from Windows Server 2008 R2 to Windows Server 2012 R2.  We quickly noticed a problem with CFDIRECTORY listing the contents of directories that contain an ampersand (e.g. //192.168.1.10/Simon & Garfunkel/).  We are using ColdFusion 10 Update11 on Windows Sever 2012 R2 and everything worked fine prior to this upgrade.  In addition, we created the same directory locally and tried running CFDIRECTORY and the same problem occurred.  The cfm page doesn't crash or report an exception in the log, it just doesn't return any results.  Thanks in advance for help on this issue.

    Thanks Adam, I just found the problem. I think it was a
    problem in the database, though I'm not sure why it works on the
    development and not on the production. The field that I pull the
    "thename" value from is a type varchar(10) and when cfoutputted
    like this [#thename#] it would result in [O MAN], however I tried
    outputting it into a textbox field and it showed [O MAN ] (<---
    actually "O MAN" followed by 5 spaces). The value was padded to ten
    characters. I'm baffled. Varchar is supposed to be variable width
    only using the number of actual characters without padding, right?
    Of my own folly I was trimming the results of the #thename#
    #codeno# pair and not thename itself. Once I set thename to
    trim(thename) it worked, of course. I'm still very confused why
    this works in the development environment and not in production,
    and to why the padding to begin with. But, I will not borrow any
    more trouble and just be happy it is resolved!
    Thanks for all your help!

  • Project Manager: Dealing with FOLDERS that contain audio?

    Hello everyone,
    I just started using Project Manager, and I'm in the process of reorganizing files. Upon examination, I've found I dont like the current location of some folders that contain audio files and would like to move them. I know its possible to "cut & paste" audio files into new places, but the manual says nothing about folders of audio and how to move them. Is there a way to do this in PM?
    Along the same lines, I dont like the names I have given to some folders and want to change them. Again, the manual shows how to change audio file names, but NOT folder names. I'm assuming folder names are just as important in searching databases correctly as file names, so is it possible to change these in PM?
    The only solution I've found to both problems is to create new folders in the finder and cut/past the audio files in PM? Seems kind of ridiculous to have to use two "programs" (finder & PM) just to move/rename folders, thus I wanted to check here first and make sure I'm doing it right. Is there another way
    Sorry for the stupid question. We now return you to your regularly scheduled programing...

    Hmmmm... this is one of those cans-of-worms situations... The PM has a "move" function, but judging by the menu choices, no "rename" function.
    If you went into an individual song and usde the "move audio file(s)" function in the audio window, you could create a new folder (with the name you want) when the file selector opens; then you've save (actually, move) the files into that new folder. Then, re-save your song/project.
    The downside to doing this is that other songs (previous versions, backups, etc.) will not find those audio files any longer (because the folder that originally contained those files is now empty). So Logic will invoke the search engine/project manager to find them.
    If the PM has been updated, this might not end up being a problem. But unless the names of those audio files have unique names, when you update PM, it will ask you which of the similarly-named files you want to choose to resolve the references for those other songs. It might mean that you spend a bit of time in front of the PM answering dialogs about it.
    I think you have to try this out to see if it works well or not.
    -=iS=-

  • How can I use iWeb to create website that contains a lot of downloadable audio files?

    Hi
    How to use iWeb to create a website that contains a downloadable audio files.  I'm uloading about 15 GB of audio files.  I need to creat folders "albums" and then put the files in these folders.   Any advise?
    Thank you very much for your time to this
    W B

    The important thing is not to put the audio files directly into iWeb: if you do that then every time iWeb decides it needs to upload the entire site you will find yourself uploading all 15GB of audio files, which won't make you happy. Start by uploading the files to the server - in folders as suits you - and then link to them in iWeb.
    If you want them to download rather than play, you may be able to set up an .'htaccess' file in the folder which will force a download - it depends on whether your hosting service will allow this. The method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/missing/download.html
    Here is an example of a simple link which produces a download (without the process described the audio file would play in the browser in a blank page):
    http://rfwilmut.net/stars/dawson2.mp3
    Then all you need to do is to provide a link, designed however suits you, in your iWeb page. If your server won't allow the .htaccess file then you will have to ask visitors to control-click (Mac) or right-click (Windows) on the link and choose 'Download linked file' or equivalent - not so convenient; or otherwise zip the files first, which won't much reduce their size but will force a download (and of course the recipients will have to unzip them).
    If you want the files to play in a player in the page, you can use an html snippet to provide a player as described in this page (you will also need to upload a script to the webspace - this is provided in the page):
    http://www.wilmut.webspace.virginmedia.com/notes/qtembed.html

  • Updating a table with a query that return multiple values

    Hi,
    I'm trying to update a table which contain these fields : ItemID, InventoryID, total amounts
    with a query that return these values itemId, inventoryid and total amounts for each items
    Mind you, not all the rows in the table need to be updated. only a few.
    This what i wrote but doesn't work since the query return multiple values so i can't assign it to journalAmounts.
    UPDATE [bmssa].[etshortagetemp]
    SET JournalAmounts = (SELECT sum(b.BomQty) FROM [bmssa].[Bom] b
    JOIN [bmssa].[SalesLine] sl ON sl.ItemBomId = b.BomId
    JOIN [bmssa].[SalesTable] st ON st.SalesId = sl.SalesId
    WHERE st.SalesType = 0 AND (st.SalesStatus IN (0,1,8,12,13)) AND st.DataAreaId = 'sdi'
    GROUP BY b.itemid, b.inventdimid)
    Any advise how to do this task?

    Remember that link to the documentation posted above that explains exactly how to do this. When you read it which part exactly were you having trouble with?

  • How to update a table with strin that contains &

    Hi,
    I would like to update ename col of emp table with a string that contains &
    update emp set ename = 'tom&jerry' where empno = 7369But this gives an error.Please advice.
    Regards,

    Consult the sql*plus reference manual on how to disable the &
    Software engineers should be capable of doing research themselves, please stop abusing this forum to increase your salary by being spoon fed for free.
    Sybrand Bakker
    Senior Oracle DBA

Maybe you are looking for