Vista automatic logon doesn't work

Please Help!
When Vista tries to automatically login it says it failed.
We've never had a password, just the return key but it won't even give me a prompt to provide the password, just the stupid button.

Your posting doesnt offer any relevant info for better understanding.
Suddenly Vista login failed. What you have done last days?
As R2D2 wrote try to start Vista in safe mode and try to rollback OS to earlier time using system restore tool.

Similar Messages

TP T60 with VISTA and dock doesn't work with DVI

Hi, at the first excuse my English.
I am beginner ]:->
I have Lenovo T60 with vista. I have advance dock from lenovo. DVI on dock doesn't work correctly. External display is distort, noisy.
After start of Vista is all right. But when I use blank white page monitor switch off and on in a circle. Monitor is in good order. Advence is in good order. (I change it 3 times).
Thank you for help or inspiration how to find a solution.

ok, i think i understand you now. you have an advance dock with a third-party PCI graphics card and can't get it to work under vista. my best recommendation is to try different drivers. i am not 100% positive but your PCI card might have to have the same GPU as your T61 to be compatible. perhaps someone else with more experience on this can help.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Submitting a pdf in acrobat 9 (vista) send button doesn't work

I have created a form in livecycle designer with either "submit by email" (sends xml file) or a submit button with a pdf chosen as submit type. The form works fine in acrobat 9 but when I click on either button and it opens my email client (outlook in windows vista), the "send" button doesn't work. Any ideas?

I have created a form in livecycle designer with either "submit by email" (sends xml file) or a submit button with a pdf chosen as submit type. The form works fine in acrobat 9 but when I click on either button and it opens my email client (outlook in windows vista), the "send" button doesn't work. Any ideas?

Outlook 2007 - Automatic processing doesn't work unless logged in

Hi guys,
I'm working with an equipment mailbox in an Exchange 2007 / Office 2007 and am having some difficulty getting it to work properly.
Basically, I've set the equipment mailbox up appropriately and have checked all three of the 'Resource Scheduling' tasks to automatically accept meeting requests and process cancellations as well as to decline conflicting and recurring meeting requests
As long as I am logged in 'as' the user account of the equipment mailbox (for example, 'PipetteBalance') meeting requests are processed automatically from my own account (and other users)
However, as soon as I log out of the PipetteBalance account the automation halts until I log back in to it again (and thus connect to Exchange via Outlook)
I've disabled cached exchange mode and have forced the 'AutoAccept' powershell cmdlet against the mailbox to no avail
Even adding the mailbox as a shared mailbox doesn't work. I have to log in as the account directly and have an 'active' connection with Exchange for the automation to work
This is the full list of properties set against the equipment mailbox:
AutomateProcessing : AutoUpdate
AllowConflicts : False
BookingWindowInDays : 180
MaximumDurationInMinutes : 1440
AllowRecurringMeetings : True
EnforceSchedulingHorizon : True
ScheduleOnlyDuringWorkHours : False
ConflictPercentageAllowed : 0
MaximumConflictInstances : 0
ForwardRequestsToDelegates : True
DeleteAttachments : True
DeleteComments : True
RemovePrivateProperty : True
DeleteSubject : True
DisableReminders : True
AddOrganizerToSubject : True
DeleteNonCalendarItems : True
TentativePendingApproval : True
EnableResponseDetails : True
OrganizerInfo : True
ResourceDelegates : {}
RequestOutOfPolicy :
AllRequestOutOfPolicy : False
BookInPolicy :
AllBookInPolicy : True
RequestInPolicy :
AllRequestInPolicy : False
AddAdditionalResponse : False
AdditionalResponse :
RemoveOldMeetingMessages : True
AddNewRequestsTentatively : True
ProcessExternalMeetingMessages : False
DefaultReminderTime : 15
RemoveForwardedMeetingNotifications : False
Is there something I may have overlooked or not set up properly?
Thanks,
Adam

Hi,
Please try to use Windows Search to search for words or phrases that you expect to find in email messages. In this way, we can determine if Outlook data is being indexed.
If no results were returned, please try to search other files (not Outlook emails) with Windows Search to check if the Windows search feature is broken. If so, we can try to reinstall the Windows search feature to check if it helps. To do this, please follow:
1. Go to Control Panel > Programs > Turn Windows features on or off.
2. Untick "Windows Search".
3. Press OK and wait until the installer is finished.
4. Reboot your computer.
5. Repeat steps 1-3 to enable it again.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Edit in Photoshop from Lightroom doesn't work; Automate Photomerge doesn't work

Edit in Photoshop from Lightroom doesn't work.
It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
Likewise, I also can't automate>Photomerge ... I pick all the images for the PHotomerge and hit "okay," but nothing happens. Makes me think it's Photoshop, not Lightroom, that is all wacky.
I'm on a Mac, using OS X Yosemite, 10.10.1 Lightroom is version 5.7 Photoshop is CS5, version 12.0.4
I uninstalled Photoshop CS5 and reinstalled. No change. I also tried dumping PS preferences, but that didn't affect a thing, either.

None of my "Edit In" worked with the pictures in Lightroom for a particular folder. I expanded the 2014 folder and found that two subfolders had a "?" in front of the 2014-07-04" and another. In other words, the folder was missing. After I found the missing folders using the Lightroom "Find Missing Folder" option, I was able to use the "Edit In" menu item. The 2014 folders weren't expanded at first, so I didn't see the ? marks in front of them. With the missing folders, Lightroom's "Edit In" option was basically telling me there was no picture to "Edit In." Howerver, I have Previews and Smart Previews made when I import picture files into Lightroom. So, the "pictures" showed in the slide strip on the bottom, and also in the display in "expand," but it was actually only showing the previews I had built, not the actual missing pictures in the missing folders. I had accidentally moved some directories using Windows Explorer, and I didn't realize my "happy fingers" moved them outside of Lightroom. Of course, Lightroom has no way of knowing I moved them, and just shows the "?" before the missing folder name. After expanding the root folder, then knew what to do. Fixed it easily. It was frustrating, and took about 20 minutes to see the problem. And that fixed the greyed-out "Edit In" Photoshop CC 2014, and all the other plug-ins were greyed out too.
Hope this fixes your problem.
Mike

RDP 6.0 Vista lefthand Mouse doesn't work

When i connect to a Terminal client with my Windows Vista my left hand lefthand Mouse doesn't work correctly (switch to right hand).
With Windows XP and RDP 6.0 i haven't these problem.
what goes wrong?
Regards
Walter

First off, I can state with 99.9% certainty that this has *nothing* to do with USB vs. PS/2 mice, and since you don't have custom mouse software on the client, the driver on the client is irrelevant to the equation. The version of Remote Desktop you are using is the most up to date available, so upgrading won't help you.
I suspect (this is just a theory as I lack a mouse to test it with presently), that the problem is not that Remote Desktop doesn't recognize the presenter mouse. Rather, the Presenter mouse software that does the custom button swapping is only designed to work with the Presenter mouse. It ignores the emulated mouse that Remote Desktop uses on the server to forward mouse clicks from the client, so Presenter settings don't get applied.
Does the server's mouse software completely remove the check box to swap mouse buttons, or does it just offer an additional means of swapping mouse buttons? If the check box still exists, you should be able to use it to fix the Remote Desktop problem. If it doesn't exist, I'm afraid I can't offer much in the way of solutions. The only possibility I can suggest is that while the client mouse software is not causing your problem, you might be able to solve the problem using the same weird mouse software that is causing the problem on the server. As a test, you might try turning off mouse button swapping on the client, installing the Presenter on the client, and using the mouse button assignment mechanism it provides. If it is bypassing the usually mechanism for swapping mouse buttons, it is possible that the Remote Desktop client won't detect the swap, and will pass the clicks on to the server inverted. It's not an ideal solution, since in order to make it work in the long term you'd need to get another Presenter mouse for the client, but try it out to see if it *can* solve your problem.
I will look into providing a mechanism to solve this more easily in the future (even if it is just a checkbox to allow you to force a swap), but any solution would not be available for quite a while I'm sorry to say.

Automatic update doesn't work for limited account in windows XP sp3

Hello,
When I try update firefox using search for update in "about firefox" window with a limited account in Windows XP sp3, it searched (circle is running) then nothing happens (circle continues running with the text "search for update" continues showing). Automatic update never happens too even with option "install automatically updates" checked. The option "Use a background service for install updates" is checked too. This behaviour begins with Firefox 29 (Australis theme). Updates worked on previous version. I used Firefox with French localization so maybe my translation of menus, options and buttons are not right. I try to give "modify" rights for the limited account on "Mozilla Firefox" folder and "Mozilla Maintenance Service" folder but it doesn't work too. Is it a known bug ? I found on bugzilla this ( https://bugzilla.mozilla.org/show_bug.cgi?id=711475 ) but it is said resolved fixed. Or there is an another solution ? Thanks for your support.

I used full installers for install Firefox. Reinstallations (uninstallation, restart pc then installation) with limited account and administrator account don't allow automatic updates for limited accounts. Only automatic updates for administrator account worked and work for both of reinstallations. Manual updates work but don't solve this problem.

Have a MP530 (Using Vista) and Scanner Doesn't Work

I downloaded all the software, etc. from the Canon site and everything works except the scanner.
It keeps giving me that it isn't connected. I have done all the necessary changing of USB ports and reloading the software from the site and it still doesn't work. Canon help was no help.
Can anyone figure this out for me.
Thanks.

Hi MitchT,
I would like to have you create a new user account on your computer and then attempt to scan to see if you are able to scan under that account. To create new user account, please follow these steps:
1. Click Start and then Control Panel.
2. Click User Accounts and Family Safety.
3. Under User Accounts, click Add or remove user accounts.
4. Click Create a new account.
5. Type the name that you want to use for the account.
6. Select Administrator for the account type, and then click Create Account.
Once the new account has been created, please login under that account and then attempt to scan again. Are you able to scan successfully?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

CF 7.02 on vista and iis7 doesn't work ...

After installing IIS 7 in my new WIN Vista laptop. I have
been trying to migrate ColdfFusion to the new machine.
I can't get the local server to work with CF, however. The
latest error is a http 500.0 - internal server error.
I have tried the following:
http://www.communitymx.com/content/article.cfm?page=1&cid=224AA
but on page six I get an error message that the isapi module
doesn't exist
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=1&catid=3&threadid=12 57380
but I still get the http 500.0 error
- the adobe web server confoguration tool - wsconfig
After the above two solutions the tool recognizes the iis
server (it didn't before!) . But when I click OK to configure I get
the message that 7.x is not supported...
Is there any other way to get CF working on my local
webserver? Maybe another webserver platform? (Which one and how?)

Google ColdFusion and Vista.
There are a number of resources available out there now which
explain how to get CF7 working with Vista. I managed to get CF 7.02
running on Vista business last weekend.
You have to do a little bit of sqeaking but CF 7 will run
under Vista.
Sorry I dont have the links with me, thats why I say google
it.

Mighty Mouse bluetooth: scroll wheel in Vista 64 bit doesn't work

I Installed Vista 64 bit on my Mac Pro.
My bluetooth mighty mouse has been recognized as an hid mouse. It works but the scroll wheel.
I tested on osx and it works, so it is not dirty or broken.
I tried to install the drivers from my leopard dvd but I receive an error message during the installation.
I downloaded the bootcamp update for 64bit systems but when I try to install it, it tells me the software to be updated is missing.
I tried to use a recent leopard dvd a friend gave but it tells me that my system doesn't support 64 bit softwares (is a late 2007 Mac Pro).
Is there anyone who knows the answer?

http://support.apple.com/kb/HT1999
http://store.apple.com/us/product/MB576Z/A
You have to have a pre-2008 Mac Pro I take it.
(might want to include more in your profile)
First you need to install 64-bit drivers from Apple off 10.5.4 or later DVD or from a 2008 Mac Pro.
Might even be drivers for generic BT mice available somewhere??
http://support.apple.com/kb/HT1845
http://www.apple.com/downloads/macosx/apple/application_updates/bootcampupdate21 forwindowsvista64.html
I think you'll need to uninstall your current Apple services and device drivers, restart and then go with BC 2.x for 64-bit.

Windows 7 auto logon doesn't work

Hi, We have requirement to setup autologon for our kiosk PCs.
Using GPOs, We have set "Interactive logon: Do not require CTRL+ALT+DEL" to enabled. and also created following registries.
AutoAdminLogon - 1
DefaultDomainName - "domain name"
Default Password - "password"
DefaultUserName - "username"
These are all under [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
These GPOs are applied to a separate OU created for Kiosk machines.
We build our machines using SCCM 2012, we install the OS and move the computer object to Kiosk OU. During the OS installation, the computer applies the WIM, joins domain etc.. and reboots several times after the object is moved to Kiosk OU.
However, once the installation finishes the computer doesn't auto-logon. Restarting it once makes the computer to autologon. Suspecting the policies are not getting updated , i added 2 restarts in the end of our installation sequence but still after OS installation
the computer doesn't logon automatically. It still needs a restart manually for the autologon.
Has anyone experienced this? What could be the cause of it?
Thanks in advance.

Thank you for sharing your solutions and experience here. It will be very beneficial for other community members who
have similar questions.
Yolanda Zhu
TechNet Community Support

Reinstaaling vista after format doesn't work !

Hello,
I've big troubles with my motherboard P7N diamond with reinstalling vista 64 bits.
I have 3 HD :
1) Western Digital Raptor 150 GB 10.000 TM 16 MB cache SATA
2) Seagate 300 GB 7.200 TM 8 MB cache SATA
3) Western Digital 160 GB IDE
I have installed the SATA drivers available on MSI website and the bios version is 1.1.
I've format the 2 WD HD with Vista DVD.
When I want to install vista on the IDE drive, it works ! But when I want to install it on the WD Raptor SATA drive, it is not working - > blue screen and error messages ...
How do I have to do ? Thank you for your help, it is important.
Didier

I recommend installing your vista disk on your raptor drive and using your seagate drive to use for vista page file for hard disk space reserved by Windows for use as additional memory and your IDE drive just for storage if needed.
Start by installing your copy of Windows Vista on your raptor drive and once that is done and all updates are done Click on the start menu and right click on computer and Choose properties.
Then choose advanced system settings.
Click advanced tab then under performance heading choose settings.
Check the advanced tab again then under the virtual memory heading click change.
Un-check the automatically manage paging file size for all drives box.
In the window that shows the list of partitions (C:, D:, etc.) choose a partition that resides on the physical hard drive that does not have Windows installed and highlight it. Select the system managed size option then click the set button. This will create a paging file on the hard disk in question.
You will notice that the paging file size for the drive now reads system managed.
Now highlight your C: partition (assuming that this is where Windows Vista is installed). Select the no paging file option and click set.
Your IDE drive can just be used for extra storage then for pictures or whatever.

Automatic download doesn't work on some purchased shows.when trying to download purchased season pass tv shows in SD i can't get button to work only shows HD

Automatic download works on some tv show and not I have go to store and go thru them one at a time to download it. It also tells me there are to downloads avail when really there are. Also when i've purchased a season pass on SD I try clicking on the SD button but it does't work. Ive downloaded show for yrs this problem just started. Please help

I have the same problem, just showed up recently - very fricking annoying!!

Pdf document with automatic summation doesn't work.

Tech specs for Adobe are: Apple Safari 4 for Mac OS X 10.5.8 and Mac OS X 10.6.7; Safari 5 for Mac OS X 10.6.7 - 10.6.8,
my Mac is: Mac OS X Lion 10.7.2 (11C74)
Is my newer OS the problem?

I used full installers for install Firefox. Reinstallations (uninstallation, restart pc then installation) with limited account and administrator account don't allow automatic updates for limited accounts. Only automatic updates for administrator account worked and work for both of reinstallations. Manual updates work but don't solve this problem.

"Open with" "do this automatically" option doesn't work.

I recently upgraded to Firefox 3.6.23.
My VOIP provider copies my voicemail messages to .WAV files and sends them to my email. Very handy.
When I try to download such a file, Firefox pops up a dialog asking me what program to use; it correctly remembers that my choice is the "Windows Media Player" (which is also called out in "Tools/Options/Applications").
The dialog also has a checkbox labeled "Do this automatically for files like this from now on". I set this checkbox many boots ago, and the dialog always pops up with it set, but it never does what the label says. I always have to click "OK" to proceed.
Fix?

That choice only work if the files are send with a valid MIME type.
See:
*http://kb.mozillazine.org/File_types_and_download_actions
*https://support.mozilla.com/kb/Managing+file+types

Vista automatic logon doesn't work

Similar Messages

Maybe you are looking for