Visualizer

Visualizer is all balck wont display any plug ins, can not choose the Options button,,, HELPP PLEASE!!!!!!

I've got a problem with my visualizer, too. iTunes won't load any, just the Apple one. I used to have a few others (Matrix GL, etc.), but now they won't load. They used to be accessible under the "Visualizer" menu. Now they're not. I've tried deleting my iTunes preferences files, no help. Any ideas?
thanks,
Jeremy
P.S. Guys, when you fix a problem on your computer, it would really help if you list what your fix was here in the forum. Simply putting "I fixed it" doesn't help others. thanks again.

Similar Messages

I have gmail and hotmail account on my macbook. In gmail I can visualize all the mailboxes but in hotmail i only can see the inbox ¿how can I visualize the rest of the mailboxes? thanks

I have gmail and hotmail account on my macbook.
In gmail I can visualize all the mailboxes but in hotmail i only can see the inbox ¿how can I visualize the rest of the mailboxes?
I have the same problem with my ipad; the solution would be the same?
thanks

Hello Sophie59
You should be able to see two different tabs when setting up the email if you go to Other > Add Mail Account. Once you enter in the email address and password, you should be at the next screen to provide more details about the email as far as incoming and outgoing servers and at the top there will be a blue section to add it in as a POP or IMAP email account. Check out the article below for further troubleshooting and emails setup options.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
iOS: Adding an email account
http://support.apple.com/kb/ht4810
Regards,
-Norm G.

Can't open visualizer in itunes window. It goes to full screen and "show visualizer in full screen" won't stay unchecked. I'm running SL and everything is up to date.

I would really like to be able to view the visualizer in the itunes window. when I uncheck full screen in preferences it does not take. I'ts automatically checked when I open preferences.

I would really like to be able to view the visualizer in the itunes window. when I uncheck full screen in preferences it does not take. I'ts automatically checked when I open preferences.

Visualizer options are greyed out

I just realized that the Visualizer Options are greyed out for no apparent reason. I checked both the "iTunes Visualizer" and the "iTunes Classic Visualizer" settings to no avail. Is there a way to activate this feature?
I am running iTunes 11.1.0.126 on Windows 7 64-bit.
Thank you.

So does that mean nobody knows how to fix this or nobody cares?

Problem with changes and visualization in the forms

I have a problem with forms, the problem is the next, I do a modification in the database with a update or with form and in other station no visualized the change. The other station need close the form and open for visualize the modification.
Why I have this problem

I am not sure what you mean. Are you saying that after one form changes and commits data, it is not visible on the other user's screen?
If that is the problem, unfortunately, that is the way Forms works. A form must re-query the data to see changes on the database. If your form must close and re-open, then you should create a trigger in your form to re-query the same data.
I hope this helps.

I am having trouble with iTunes (possible Quartz Composer Visualizer problem) but have no idea how to fix it.

I tried to use my iTunes but the icon didn't show up and instead I get a folder. The folder is titled TunesApp and in it is another folder called Contents. Contents contains: _CodeSignature, Frameworks, Info.plist, MacOS, PkgInfo, Resources, and version.plist. In the folder MacOS is my iTunes and I can use it, but I get this message:
Last login: Sun Feb 24 13:13:15 on ttys000
unknown705681bcc901:~ kathrynbarber$ /TunesApp/Contents/MacOS/iTunes ; exit;
2013-02-24 13:13:20.988 The plugin 'Quartz Composer Visualizer' failed to load because it has the wrong CPU architecture for this version of iTunes. (3585)
Version from driver for Certificates 1
I can only use my iTunes as long as I keep the message open. When I close the message it tells me: "Closing this window will terminate the running processes: login, bash, iTunes." I have no idea what is going on with it as it was working not too long ago. I do not think I updated it recently but I could be wrong. Any help would be much appreciated.
Thank you!

Sounds like your computer is having additional issues. I suggest taking it to your nearest Apple Store.

Want to add some animated 3D visualizations to my Keynote Presentation

I want to kick my Keynote presentation up a notch and add some animated 3D visualizations to further enhance my design explanation. It would involve creating some basic 3D models from scratch and then animating a sequence to explain how it is put together along with some other effects.
Can this be done in Final Cut Studio 2? or do I need to look further? Anybody know what my options are?
Thanks,
Bill

Bill ~ I haven't worked with 3D, but Final Cut Studio 2 includes _Motion 3_ which appears to allow only 2D objects (images & video) to be animated within a 3D space. If that's so, then _Maxon Cinema 4D_ may provide what you're looking for. More sources for Mac animation s/w is here:
http://www.pure-mac.com/3d.html
http://www.apple.com/downloads/macosx/imaging_3d/index.html

Unable to find data visualization component in JDEV 11g Preview 4

we have installed jdev11g preview 4 and we are unable to find ADF data visualization component.
Is there anyway we could add this component.
Thanks in Advance
Sabir

Hi,
in the component palette (while having an ADF Faces page open), right click and then choose "Edit Libraries" from the context menu. Choose the DVT libraries and toggle them to the selected libraries. The DVT components should show now
Frank

Alternative Performance Visualizations in SAP Strategy Management

A question frequently posed to the SAP Strategy Management solution management team is u201Cu2026beyond scorecards and strategy maps, are there other ways within SSM that I can visualize my organizationu2019s performance?u201D The answer is yes.
The SSM Strategy page allows you to create and display up to three goal diagrams. Typically SSM users will just create a strategy diagram (the most common type of goal diagram) and let the other two goal diagram place holders go unused. However, with a little ingenuity the other two goal diagrams could be put to very good use.
Using the goal diagram manager on the SSM Administration console you can import custom images (e.g. Adobe Illustrator or MS Visio images) into the SSM Strategy page. Once a custom image has been imported, hotspots can be mapped on top of the image that allow you to view the status and details of scorecard objects in relation to the image. Hotspots can be created for Contexts, Perspectives, Objectives, and KPIs (KPI hotspots are new in SSM 7.0). For each hotspot location a status indicator is displayed reflecting the Red/Yellow/Green status of the scorecard object. When the hotspot is clicked, details for the scorecard object are displayed in a dropdown box.
So if, for example, you have created contexts for different geographic regions within the United States, you could import a map of the United States and then map context hotspots that allow you to easily view your organizationu2019s performance across geographic regions. So, on your US Map goal diagram you might see a green status icon over California, red over Boston, Yellow over Florida, etc. indicating your organizationu2019s performance in those regions.
Other custom goal diagram examples include:
- Organization charts that show the performance of different divisions / groups within your organization
- Process flow diagrams that show performance of different elements of a business or production process
- Initiative / project summaries that show the performance of multiple initiatives
For more information on how to manage custom diagrams in SSM, view the Help topic u201CGoal Diagramsu201D within the SSM Administration console.
Best Regards,
Chris Clay
Enterprise Performance Management
Solution Management

Hi Guna,
Please see this document for recommended roles for strategy management - http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0ac7368-092f-2a10-d68f-8ba5c3f75f10?quicklink=index&overridelayout=true
Regards,
Sen

I need to visualize a document attached on a pdf file on an iPad. Is there any application to do that ?

I need to visualize a document attached on a pdf file on an iPad. Is there any application to do that ?

Yes. Quite a few actually.
Starting with Apple's own iBooks App, I also see many recomendations for Goodreader, and Adobe's own PDF Reader. Just to name a few. Look for them in the App Store. iBooks and Adobe reade are free. You can also search the App Store for other alternatives.
Also for most PDF's the Mail App can open them directly.

[Solved] Ncmpcpp Visualizer Failed To Load (Blank)

I've install ncmpcpp and mpd and I've followed each guide to enable visualization. Unfortunately I don't know what have cause it to failed to load.
Everytime I hit '9' to reveal it, it just showing blank terminal..for your information all of my songs just played fine.
I used config from one of our member via this thread. here is my .ncmpcpp/config:
##### connection settings #####
mpd_host = "localhost"
mpd_port = "6600"
mpd_music_dir = "/home/drfreddy/Music"
mpd_connection_timeout = "5"
mpd_crossfade_time = "1"
mpd_communication_mode = "notifications" (polling/notifications)
visualizer_fifo_path = "/tmp/mpd.fifo"
visualizer_output_name = "my_fifo"
visualizer_sync_interval = "1"
visualizer_type = "wave" (spectrum/wave)
system_encoding = "utf-8"
##### delays #####
playlist_disable_highlight_delay = "5"
message_delay_time = "4"
# Playlist
song_columns_list_format = "(7f)[cyan]{l} (25)[blue]{a} (40)[red]{t|f} (30)[magenta]{b}"
song_list_format = "{$3[%l]$9} {$5%a$9} - {$2%t$9} - {$6%f$9}"
now_playing_prefix = "$b$1» "
now_playing_suffix = "$/b"
playlist_display_mode = "columns" (classic/columns)
autocenter_mode = "yes"
centered_cursor = "yes"
cyclic_scrolling = "yes"
mouse_list_scroll_whole_page = "no"
# # Bars
song_status_format = "{%a - }{%t - }{%b}"
progressbar_look = "─╼ "
titles_visibility = "no"
header_visibility = "no"
statusbar_visibility = "yes"
# Browser
browser_playlist_prefix = "$2plist »$9 "
browser_display_mode = "classic" (classic/columns)
# Colors
discard_colors_if_item_is_selected = "yes"
header_window_color = "default"
volume_color = "cyan"
state_line_color = "white"
state_flags_color = "green"
main_window_color = "default"
color1 = "cyan"
color2 = "black"
main_window_highlight_color = "red"
progressbar_color = "cyan"
statusbar_color = "white"
active_column_color = "red"
visualizer_color = "cyan"
# Others
song_window_title_format = "MPD: {%a > }{%t}|{%f}"
search_engine_display_mode = "columns" (classic/columns)
follow_now_playing_lyrics = "yes"
display_screens_numbers_on_start = "no"
user_interface = "alternative" (classic/alternative)
And here is my .mpdconf:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/drfreddy/Music/"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "~/.mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "~/.mpd/database"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#log_file "~/.mpd/log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#pid_file "~/.mpd/pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#state_file "~/.mpd/state"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "drfreddy"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
gapless_mp3_playback "yes"
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#restore_paused "no"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the mpd.conf man page.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "Beats by Dr. Freddy"
device "hw:0,0" # optional
format "44100:16:2" # optional
mixer_type "software" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## url "http://example.com" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Client TCP keep alive #######################################################
# For clients connected by TCP on supported platforms.
# Allows detection of dangling connections due to clients disappearing from
# the network without closing their connections.
# This is not usually necessary but can be useful in cases such as wifi connectected
# clients that go in and out of network range or turn off wifi without closing their
# connections. Combined with low max_connections this can soon cause clients to not
# be able to connect.
# Enable tcp keepalive on new client connections (default is "no")
#tcp_keep_alive "no"
# Time in seconds since the last communication on the connection and before
# the keepalive probing is started. (default is 7200 seconds)
#tcp_keep_alive_idle "7200"
# Interval in seconds between keepalive probes, once a probe started.
# (default is 75 seconds)
#tcp_keep_alive_interval "75"
# Number of failed probes before the connection is pronounced dead and
# the connection is closed. (default is 9 times)
#tcp_keep_alive_count "9"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
audio_output {
type "fifo"
name "my_fifo"
path "/tmp/mpd.fifo"
Can somebody tell me how to enable the visualization? Am I missing something?
Last edited by Archer1X (2013-02-07 10:48:34)

Nevermind..got it working after configured that I have to put this line in .ncmpcpp/config:
visualizer_look = "+|"
Anybody have a better look for the visualizer?
I also have tried several figures like "=="..hmm..kinda like it..
Last edited by Archer1X (2013-02-07 10:49:13)

Itunes won't open - problem with visualizer?

For some reason Itunes won't open for me - I have had it for ages, never a problem, but I got Leopard last week and now Itunes has crashed. When i try to open it it freezes and then closes, with an error message that says 'the problem may have been caused by the ItunesX Visualizer plug in'.
Any advice on how to fix this? I have uninstalled and reinstalled both itunes and Quicktime, but nothing seems to work.

Same problem here! I'm going crazy. I did those two things you did and NOTHING, nada, help us!

After upgrading to Lion iTunes won't let me access visualizer options; is this a glitch?, After upgrading to Lion iTunes won't let me access visualizer options; is this a glitch?

I've upgraded to Lion OS (10.7.2) and now the 'Option' menu item under 'Visualizer' in iTunes is gray; is there a solution to this or is it a software glitch?

Me too. Tried all of the usual suggestions; reset cache, reset warnings, messed with the hosts files, everything,
Still can't connect to the store, all I'm trying to do is download all the album artwork for my albums...
EDIT: Exactly the same situation too, Macbook pro with SSD in an optibay and HDD in its usual place. Upgraded to mavericks as part of my SSD upgrade

I want to have a screensaver from apple tv similar to visualizer in itunes. Does anyone know of a way I can achieve this?

I want to use a screensaver on my apple tv similar to visualizer in itunes. Does anyone know a way of doing this or is there any discussion by apple to add this feature in the future. I often use the apple tv in multiple rooms for get togethers and do not want photos playing during those events. I wish there was a better screensaver option.

There has been discussion about this, i'm sure if you do a search you will find them. However, this is not possible at the current time. Since we are all users here we won't know if an update will bring this.

How can I visualize 2 documents at the same time

How can I visualize 2 documents at the same time?
thanks

Adobe Reader on mobile devices allows to view ONE document at a time.

Lightroom 5 - Advanced Healing Brush and Visualization tool | What's New in Lightroom 5 | Adobe TV

Discover the new enhancements to Lightroom’s Advanced Healing Brush including the ability to heal and clone non-circular brush spots as well as remove easy-to-miss sensor dust using the new Visualization tool.
http://adobe.ly/11rZVq5

Can the removal spots (circular) be resized like they could in LR 4?

Visualizer

Similar Messages

Maybe you are looking for