%VOICE_IEC-3-GW: H323: Internal Error (Socket error): IEC=1.1.186.5.7.5 Error
Can anyone help me with this error. I would like to know what this error means. From what i can see its a call disconnect but it a fault or maybe a call restriction?
%VOICE_IEC-3-GW: H323: Internal Error (Socket error): IEC=1.1.186.5.7.5 on callID 6732 GUID=4DD81BA230AA11E385F070CA9BB22E20.
I could reproduce something in the lab which causes the same error codes:
287674: Oct 14 14:20:30.840: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xFA49
Channel ID i = 0xA98388
Exclusive, Channel 8
287675: Oct 14 14:20:36.840: %VOICE_IEC-3-GW: H323: Internal Error (Socket error): IEC=1.1.186.5.7.5 on callID 272232 GUID=D9FEA303340111E38068001DA10435C0
287676: Oct 14 14:20:36.848: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0xFA49
Cause i = 0x80A6 - Network out of order
This happens in my case if an interface has the H.323 bind whose IP address is not reachable from the CUCM (loopback interface, routing issue?).
No TCP connection can be established between gateway and CUCM.
A good debug choice on the gateway is "debug ip tcp transaction"
Here my example:
287691: Oct 14 14:21:58.222: TCP: Random local port generated 27825, network 1
287692: Oct 14 14:21:58.222: TCB4B0EED38 bound to 10.0.0.1.27825 <--- IS THIS THE INTERFACE YOU WANT FOR SIGNALLING??
287693: Oct 14 14:21:58.222: Reserved port 27825 in Transport Port Agent for TCP IP type 1
287694: Oct 14 14:21:58.222: TCP: sending SYN, seq 227953095, ack 0
287695: Oct 14 14:21:58.226: TCP0: Connection to 10.45.0.50:1720, advertising MSS 1460
287696: Oct 14 14:21:58.226: TCP0: state was CLOSED -> SYNSENT [27825 -> 10.45.0.50(1720)]
287697: Oct 14 14:21:58.226: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xFB49
Channel ID i = 0xA98389
Exclusive, Channel 9
287698: Oct 14 14:22:00.226: 10.0.0.1:27825 <---> 10.45.0.50:1720 congestion window changes
287699: Oct 14 14:22:00.226: cwnd from 1460 to 1460, ssthresh from 65535 to 2920
287700: Oct 14 14:22:00.226: TCP0: timeout #1 - timeout is 4000 ms, seq 227953095
287701: Oct 14 14:22:00.226: TCP: (27825) -> 10.45.0.50(1720)
287702: Oct 14 14:22:02.634: TCB4B0A7300 setting property TCP_TOS (11) 498A5BD8
287703: Oct 14 14:22:02.838: TCP0: ACK timeout timer expired <--- NO ACK RECEIVED FROM CUCM
Check on the CUCM with CLI "utils network capture host ip " if packets from the gateway actually arrive at CUCM. If they do maybe the way back is not possible.
Try to telnet the CUCM to port 1720 from the gateway signalling interface.
If you don't get an "open" you have a network issue (routing, firewall, ACL...)
Bad example:
router#telnet 10.45.0.50 1720 /source-interface lo10
Trying 10.45.0.50, 1720 ...
% Connection timed out; remote host not responding
Good example:
router#telnet 10.45.0.50 1720 /source-interface fas0/0
Trying 10.45.0.50, 1720 ... Open
hope that helps
Martin
Similar Messages
-
IO Error: Socket read timed out / IOP_iopinstance1_datasource" closed
Hi ,
Can somebody suggest what could be the probable cause of following errors showing up in IOP log file?
####<Aug 16, 2011 10:49:11 PM PDT> <Info> <Common> <sc-csttest> <IOPServer_iopinstance1> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@357ac2f7> <<anonymous>> <> <0000J7MI9kZFk3vLsYw0yX1EIpFA00002K> <1313560151943> <BEA-000628> <Created "1" resources for pool "IOP_iopinstance1_datasource", out of which "1" are available and "0" are unavailable.>
####<Aug 16, 2011 10:49:12 PM PDT> <Info> <JDBC> <sc-csttest> <IOPServer_iopinstance1> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@357ac2f7> <<anonymous>> <> <0000J7MI9kZFk3vLsYw0yX1EIpFA00002K> <1313560152146> <BEA-001128> <Connection for pool "IOP_iopinstance1_datasource" closed.>
java.sql.SQLRecoverableException: IO Error: Socket read timed out
Thanks
LokeshThis particular error means your database is down and socket is timedout. Or the query takes so long that the reader timedout -- unlikely.
Also, the general weblogic socket write errors, which you might see sometimes means that the client got disconnected before the server wrote results back. This is harmless -
IO error: Socket output stream shutdown by peer when trying to import DCs
Hi,
I am getting this error when trying to import DCs.
com.sap.lcr.api.cimclient.CIMClientException: IO error: Socket output stream shutdown by peer
I am specifying the SDM host, similar to J2EE URL I guess along with SDM port in Development configuration pool URL.
Can some one guide me if I am missing some thing or some thinkg else is going wrong.
Any help or suggestion will be very helpful to me.
Thanks and regards,
ChinnuHi Nithn,
Thank you for the response.
It is due to issue in track configuration.
Build Server and Repository server URLs are not Fully qualified domain names.
Made a host entry and I was able to import the configuration.
Thanks and regards,
Chinnu -
WebLogic 11g data source connection pooling failed with IO error:socket read timed out.
Hi all,
We encountered IO Error: Socket read timed out( <Received exception while creating connection for pool "DS_1": IO Error: Socket read timed out> ) during the creation of data sources in WebLogic 11g. Manual data source testing seems to indicate intermittent connection and the server seems to take a long time to start up with multiple IO errors. We increased the timeout at the database side but it does not seems to help. The database is 11g (11.2.0.3). The database services and listener are up which does not indicate that the database instance is down.This particular error means your database is down and socket is timedout. Or the query takes so long that the reader timedout -- unlikely.
Also, the general weblogic socket write errors, which you might see sometimes means that the client got disconnected before the server wrote results back. This is harmless -
I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRITry this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
Error occurred while converting the file ".." An unknown error occurred -50
I've had a few tracks which seem to skip on my ipod but play perfectly fine on itunes.
As a result, I've been converting these tracks to ACC files; this has worked for a few files but for one particular album i get the following:
+error occurred while converting the file ".." An unknown error occurred -50+
I've tried renaming the files, I re-created my playlist but nothing works.
Thanks in advance.*Skipping songs*
The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
You may like to try scanning the files with MP3 Validator which can find & fix some internal MP3 errors.
Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/option clicking and using the option Convert id3 tags > None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g. convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
tt2 -
Error message - A breakpoint in an application indicates a program error.
Hi All,
We are getting an error message when we run the Mobile Client Application saying that 'A breakpoint in an application indicates a program error. After this dialog is dismissed, the application will continue running, but it may be in an unstable state'. Anyways, on clicking the Close button of that SAP UIFramework MobileClient executable component .Net error window, it doesnot help us to continue with the application and it closes the application.
There is no breakpoint set in the source code when this error occurs and some times, this error occurs even when there is no source code kept opened too, while running the application exe.
Please can you help me in it as its a high priority one and i couldnt find any other worthful e-stuffs related to it too. This issue seems to be strange and I have never come across before. So couldnt proceed with this task. Please help me in it.
Thanks in Advance!
PriyaShankar,
Thanks for your immediate response. Its very true that its a generic problem.
Along with it, if they have used some internal breakpoints like 'Stop' command in the code, this error message occurs. Have controlled it by adding an error handler instead of using this stop command which appears to be like an application stopper. Thanks for your valuable suggestion regarding it.
Thanks,
Priya -
ERROR 5897 - Schema - conn=-1 op=-1 msgId=-1 - User error:
Hi,
when i am enabling the user status i am getting first error while disabling the user i am getting second error.
ERROR<5897> - Schema - conn=-1 op=-1 msgId=-1 - User error: Entry "uid=543289765,ou=people,l=AMR,ou=internal,dc=example,dc=com", attribute "inetUserStatus" is not allowed
ERROR<5398> - Entry - conn=-1 op=-1 msgId=-1 - Duplicate value addition in attribute "objectClass" of entry "uid=600523489,ou=People,l=EMEA,ou=Internal,dc=example,dc=com"
Thanks in advance
GVHi Thanks a lot for your reply..
InetUser object class already in use.
Brief about the problem: We are using IDM to provisining,enabling and disabling the users through Active Sync to down stream resources lilke LDAP and access manager .while enabling and disabling time On LDAP iam not getting any error but on AM i am getting the above errors.
On LDAP insted of InetUser object class we are using Orguser and attribute Orguserstatus.
i am waiting for your reply....Thanks in advance....
Regards
GV -
Error explaining ???? Don't know this error?mythtv/open-sasc/HVR4000
Hey guys!
I got some Hauppauge HVR4000 in my mythtv - setup !
Using these settings:
Kernel 2.6.31
MythTV 0.22
Drivers to HVR4000: s2-liplianin-hg
Firmware: FW version 1.23.86.1
OpenSasc-ng from AUR(build with this kernel) - but allso build without the solutipn for opensasc??? --Could this be the problem
But getting these errors:
Messages:
Jan 1 22:21:59 MainCore kernel: cx24116_load_firmware: FW version 1.23.86.1
Jan 1 22:21:59 MainCore kernel: cx24116_firmware_ondemand: Firmware upload complete
Jan 1 22:40:22 MainCore kernel: cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Jan 1 22:41:43 MainCore kernel: dvblb_fake_ioctl interrupted: 2150133582
Jan 1 22:41:44 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:45 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:47 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:48 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:49 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:50 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:52 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:53 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:54 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:55 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:57 MainCore kernel: dvblb_fake_ioctl interrupted: 2147774277
Jan 1 22:41:58 MainCore kernel: dvblb_fake_ioctl interrupted: 2147643207
Jan 1 22:41:59 MainCore kernel: dvblb_fake_ioctl interrupted: 2147643208
Jan 1 22:42:00 MainCore kernel: dvblb_fake_ioctl interrupted: 2147774278
Jan 1 22:42:01 MainCore kernel: dvblb_fake_ioctl interrupted: 2147774281
Jan 1 22:42:02 MainCore kernel: dvblb_fake_ioctl interrupted: 2147774277
Jan 1 22:42:03 MainCore kernel: dvblb_fake_ioctl interrupted: 2147643207
Jan 1 22:42:17 MainCore kernel: dvblb_fake_ioctl interrupted: 2150133582
Jan 1 22:42:18 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
(same error in dmesg)
In mythTV Getting this error?
2010-01-01 22:42:01.836 TVRec(4): Changing from Watching WatchingLiveTV to None
2010-01-01 22:42:03.878 Finished recording Robotboy: channel 2402
2010-01-01 22:42:03.992 MainServer, Warning: Unknown socket closing MythSocket(0x7fbf4800b170)
2010-01-01 22:42:04.058 MythSocket(7fbf4800b170:-1): writeStringList: Error, No data written on writeBlock (1 errors)
2010-01-01 22:42:03.995 MainServer::ANN Monitor
2010-01-01 22:42:03.992 MainServer, Warning: Unknown socket closing MythSocket(0x2474e00)
2010-01-01 22:42:04.223 adding: sove as a client (events: 0)
2010-01-01 22:42:04.309 MythSocket(2474e00:-1): writeStringList: Error, socket went unconnected.
We wrote 0 of 9 bytes with 1 errors
2010-01-01 22:42:11.413 MainServer::ANN Monitor
2010-01-01 22:42:11.491 adding: sove as a client (events: 0)
2010-01-01 22:42:16.363 MainServer::ANN Playback
2010-01-01 22:42:16.451 adding: sove as a client (events: 0)
2010-01-01 22:42:16.529 TVRec(4): Changing from None to Watching WatchingLiveTV
2010-01-01 22:42:16.613 TVRec(4): HW Tuner: 4->4
2010-01-01 22:42:16.705 DVBChan(4:/dev/dvb/adapter3/frontend0) Warning: Your frequency setting (11309000) is out of range. (min/max:950000/2150000)
2010-01-01 22:42:22.607 Expiring 10 MBytes for 2402 @ fre jan 1 22:40:00 2010 => Robotboy
2010-01-01 22:42:22.705 autoexpire: Expiring Program: Expiring 10 MBytes for 2402 @ fre jan 1 22:40:00 2010 => Robotboy
2010-01-01 22:42:22.779 Expiring 0 MBytes for 2402 @ fre jan 1 22:40:00 2010 => Robotboy
2010-01-01 22:42:22.863 autoexpire: Expiring Program: Expiring 0 MBytes for 2402 @ fre jan 1 22:40:00 2010 => Robotboy
2010-01-01 22:42:30.277 DiSEqCDevTree, Error: FE_SET_TONE failed
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:31.893 DVBSM(/dev/dvb/adapter3/frontend0), Error: Can not read DVB status
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:32.983 DVBSM(/dev/dvb/adapter3/frontend0), Warning: Can not measure Signal Strength
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:34.090 DVBSM(/dev/dvb/adapter3/frontend0), Warning: Can not measure S/N
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:35.183 DVBSM(/dev/dvb/adapter3/frontend0), Warning: Can not measure Bit Error Rate
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:36.263 DVBSM(/dev/dvb/adapter3/frontend0), Warning: Can not count Uncorrected Blocks
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:36.379 TVRec(4): Changing from Watching WatchingLiveTV to None
2010-01-01 22:42:38.425 Finished recording Robotboy: channel 2402
2010-01-01 22:42:38.565 MainServer, Warning: Unknown socket closing MythSocket(0x7fbf4800b3f0)
2010-01-01 22:42:38.565 AutoExpire: CalcParams(): Max required Free Space: 1.0 GB w/freq: 15 min
2010-01-01 22:42:38.637 MythSocket(7fbf4800b3f0:-1): writeStringList: Error, No data written on writeBlock (1 errors)
Can some one Please explain what goes wrong here and perhaps the solutionSee this for the 0xE error.
http://support.apple.com/kb/TS3221 -
Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) atFor those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc. -
when I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?
Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos. -
Type layer error: Could not complete your request because of a program error.
I am trying to rebuild text in a photo. I clicked the type tool, clicked on the background layer (knowing a new one should form) and got this error:
Could not complete your request because of a program error.
Then I made a new blank layer, clicked on it and got the same error.
I quit, relaunched started typing the new layer without a hitch. But when I selected to change the font (to any font), I got the same error
I switched to Firefox to search for the problem and went back to PSCS5. Now I can change the font! After switching applications and clicking on the type layer, I get the error again! Then it's fixed. Then it comes back.
Anyone have this problem or a solution?
I'm using Mac OS 10.5.8 with PSCS5 12.0.1Most likely you have a corrupt font which is causing problems for some of the type/font code.
Try validating your fonts with FontBook as a first step. -
CS6 Error: "Could not complete your request because of a program error."
I get the error "Could not complete your request because of a program error." anytime I try to open a .psd file someone has sent me.
This error is occuring in CS6.
Anything I can do?Hi Basedcade,
Do you know what version of Photoshop was used to create the .psd they are sending? II'd want to make sure the person sending the .psd is selecting the option to maximize compatibility when saving the .psd file. How is the person sending you the .psd file, email, etc.? Does the person sending it have an Adobe ID? If so, maybe have them upload the .psd and share it via Creative Cloud to see if it does the same thing when transferred that way?
-Dave -
REP-1401: 'cf_10formula': Fatal PL/SQL error occurred. ORA-06502: PL/SQL: numeric or value error
Hi Team,
I am running one conc programme.
After running I am getting below error. I checked the issue on metalink and other, seems that it is an size related issue. I have increased the size of formula columns and placeholdder too.
But still getting issue.
My requirement is to get comma seperated values using SQL query itself. Neither i wanted to create layout of the report , since it is a XML publisher report and nor I am including it on RTF template.
I want the CF_10 formula column to be populated with comma seperated values.
MSG-00187: From Date 01-Sep-2014
REP-1401: 'cf_10formula': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
And Here is my code for CF_10
function CF_10Formula return Number is
begin
SELECT NVL(TO_CHAR(sum(Amount),'99,99,99,999'),0) into :CP_5 --NVL(ROUND(sum(Amount)),0) into :CP_5
-- xxhw_Coll_cat(category) "Intercat Catg"
FROM hhxw_Region_col_v
WHERE Category IN ('Intercompany - CATV')
AND trunc(gl_date) BETWEEN TO_DATE(:P_FROM_DATE, 'DD/MM/RRRR') AND TO_DATE(:P_TO_DATE, 'DD/MM/RRRR');
RETURN ROUND(:CP_5);
end;
Anyone please suggest me.
Regards,
SachinHi,
1)Why are you selecting the value into a report item? Select into a local variable and return that
RETURN :CP_5 --> This one!!
2)And you should avoid applying functions to DB columns in where clauses wherever possible, so oracle can use indexes on them if applicable:
AND gl_date >= To_date(:P_FROM_DATE, 'DD/MM/RRRR')
AND gl_date < To_date( :P_TO_DATE, 'DD/MM/RRRR') + 1;
I think you are taking 2 column in the Layout CF_10 and CP_5 right? if so, then use below Query.
FUNCTION cf_10formula
RETURN NUMBER
IS
v_amount NUMBER:null;
IS
BEGIN
BEGIN
SELECT nvl(round(SUM(amount)), 0)
INTO v_amount --> Retruns the value for CF_10 column
FROM hhxw_region_col_v
WHERE category IN ( 'Intercompany - CATV' )
AND gl_date >= to_date(:P_FROM_DATE, 'DD/MM/RRRR')
AND gl_date < to_date( :P_TO_DATE, 'DD/MM/RRRR') + 1;
:CP_5 := nvl(trunc(v_amount),0); --> Retruns the value for CP_5 column
EXCEPTION
WHEN OTHERS THEN
v_amount := 0;
srw.message(1003,'Error in Getting :' ||p_from_date);
END;
END;
And
If you've got a number function returning into a number field then all you should need to do to make the comma appear is to change the number format mask in field.
From 40000 to 40,000 -
I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support
Maybe you are looking for
-
Is there a way to view pictures sent & received?
is there a way to view pictures and messages sent & received?
-
Hi I'm trying to install windows 7 on a macbook air 2011
but after i click "create a windows install disk" the progress bar reaches like 75 percent saying "copying windows files" but doesn't move past it. can anyone help?
-
Hi Oracle Gurus, I have a question, My team is using UTL_FILE to write process logs to physical files. My thinking is that if they use Direct tables to Insert process log its going to be faster compared to UTL_FILE. Am I right to think so? Thanks, Fa
-
Can anyone explain this? Clipping in highlights on 3d objects using Cineware.
I seem ot be getting some funky clipping/highlight thing going on. It's not showing up in my C4D file but it's showing in AE. I adjusted the bit depth too and that didn't work. Back in C4D shutting off that light removed it and reducing the bright
-
Oracle Reports 11g is giving error while uploading an xml
REP-62202: Unsupported image format. Although xml does not contain any image tag. <?xml version="1.0" encoding="UTF-8" standalone="no"?> <report DTDVersion="9.0.2.0.10" name="Simple"> <data> <userParameter datatype="character" display="no" name="P_JD