Volume manager for fluxbox

Some soggestion about a tray icon to control volume in fluxbox?
more info here: https://bbs.archlinux.org/viewtopic.php?pid=1209271
tried:
volwheel
gvtray
fbmix
with no success.

volumeicon, create an icon in tray, if you leftclick it you can enable/disable volume, if you rightclick it open a terminal with alsamixer.
pnmixer instead create an icon in tray, if you left-click it open a menu where you can mute or unmute and a button that link you to sound preferences.
noone of them popup a slider, the only one now is volweel, but it have a lot of problem, when you move the slider it return to 0.
(thanks for the reply)

Similar Messages

  • Veritas volume manager for solaris 10

    Hi All
    which version veritas volume manager will support solaris 10 06/06.
    can you just update a link for reference
    Regards
    RPS

    Hello,
    we are currently using solaris 9 with veritas volume manager 3.5.So i would like to know if i upgrade to solaris 10 06/06.whether i can use 3.5 or not.
    Using the Veritas (Symantec) support site, I have found the following document
    VERITAS Storage Solutions 3.5 Maintenance Pack 4 for Solaris
    http://seer.support.veritas.com/docs/278582.htm
    The latest supported version listed for VxVM 3.5 with MP4 applied is Solaris 9. That means the answer is NO.
    I understand that searching the Veritas knowledge base might be tough and time consuming, but it's their product ...
    Michael

  • What's a good lightweight file manager for fluxbox?

    I just installed arch and it's flippin awesome. I installed fluxbox because I prefer a light window manager with lots of functionality. When I used fluxbox with ubuntu I used thunar. But this time around since I'm using arch I want to use a file manager less dependent on less libraries and other share resources. So whats a good functional and maintained file manager that would be good for fluxbox?

    skottish wrote:
    frp wrote:
    Since I didn't see it here mentioned, why not try Tux Commander? it only depends on gtk2.
    I tried both thunar and pcmanfm, uninstalled them and stick with tuxcmd. The only little problem you might come into, is to manually add the buttons to mount cds and usbs (pmount helps here), unless you put them on fstab and they automatically appear there.
    Well, just give it a try
    $ pacman -S tuxcmd
    note: if you ever tried total commander on windows, you'll fit in this one like a glove
    I just checked this out and it's pretty nice. The only thing is that it does everything by file extension and not by mime type, which is counter-intuitive for a Linux desktop IMO.
    Altho you can put name+extension as 'name'(so you can see the file 'as one'), yes, you'll have to manually had the programs you want to open each file type/extension.
    Thanks for spotting that out

  • Linux LVM (Logical Volume Manager) for CentOS on Azure?

    Hi.  I am trying out Azure and installed a OpenLogic CentOS 6 virtual machine.  I note that it is not running LVM (Logical Volume Manager) by default.  I would like to ask if it is possible to:
    1. have CentOS Linux installed with LVM by default when creating a Linux virtual machine on Azure
    2. switch to LVM after adding a new disk
    On the other hand, is it a good idea to use LVM at all?  Will it affect performance, features on Azure?
    Thanks.

    Hi,
    Based on my experience, you can add disk to an Azure VM. You can install the Logical Volume Manager to manage the disks attached to the VM. In addition, there is no Linux VM with LVM installed by default. If you want to have this, please submit your requirement
    in Azure feedback:
    http://feedback.azure.com/forums/34192--general-feedback
    In addition, since you can have only one OS system disk for an Azure VM, this limitation may make multi-disk logical volume manager setups unworkable.
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Simple volume control for fluxbox systray [Solved]

    I've been googling for this, but apparently this is a very exotic thing I'm looking for: just an icon in my systray that controls the system volume, preferrably just by scrolling up and down on it. KDE has it, Windows (nearly) has it, so I'm sure it exists, but damn if I can find it.
    EDIT: I'll be trying gvtray, as suggested by skymt.
    Last edited by kamagurka (2007-08-02 14:13:48)

    skymt wrote:gvtray will do what you want.
    Allright, thank you. Looks like what I need, even if it comes with a couple of utilities I don't need. The website is completely sparse on information, though (screenshots would be nice).

  • Rvm - Ramdisk volume manager for Arch

    Hi,
    I tried an experiment, this is a little tool that allows you to create tmpfs based ramdisks with Arch Linux installed on them.  This script depends on `arch-install-scripts' as it uses pacstrap.
    You can for example do:
    sudo ./rvm create arch /home/bla/arch-mnt
    This will essentially install arch in `/home/bla/arch-mnt' (base and base-devel so far).  The target dir `arch-mnt' will automatically be mounted as tmpfs (2G at the moment, although a command line option for the preferred size would be useful).  On top of this a .tgz of the installation will be created and placed in RVM_VOLUMES_PATH (which needs to be set manually in the shell script for now, typically `/home/<user>/.rvm').
    We can then do:
    sudo ./rvm start arch /home/bla/arch-mnt
    This will unpack the `arch.tgz' from RVM_VOLUMES_PATH into the mount point.  We can then use `arch-chroot'.
    Similarly to stop the ramdisk we do:
    sudo ./rvm stop arch /home/bla/arch-mnt
    This will backup everything from the mount point to a .tgz and copy it back to RVM_VOLUMES_PATH.
    There are a couple of things that could be done better and will be, this is just a barebones version of the script.  We could for example have rc.d/systemd scripts to start/stop etc.
    Code is available on github
    Last edited by dimigon (2012-09-20 14:35:28)

    Hi,
    I tried an experiment, this is a little tool that allows you to create tmpfs based ramdisks with Arch Linux installed on them.  This script depends on `arch-install-scripts' as it uses pacstrap.
    You can for example do:
    sudo ./rvm create arch /home/bla/arch-mnt
    This will essentially install arch in `/home/bla/arch-mnt' (base and base-devel so far).  The target dir `arch-mnt' will automatically be mounted as tmpfs (2G at the moment, although a command line option for the preferred size would be useful).  On top of this a .tgz of the installation will be created and placed in RVM_VOLUMES_PATH (which needs to be set manually in the shell script for now, typically `/home/<user>/.rvm').
    We can then do:
    sudo ./rvm start arch /home/bla/arch-mnt
    This will unpack the `arch.tgz' from RVM_VOLUMES_PATH into the mount point.  We can then use `arch-chroot'.
    Similarly to stop the ramdisk we do:
    sudo ./rvm stop arch /home/bla/arch-mnt
    This will backup everything from the mount point to a .tgz and copy it back to RVM_VOLUMES_PATH.
    There are a couple of things that could be done better and will be, this is just a barebones version of the script.  We could for example have rc.d/systemd scripts to start/stop etc.
    Code is available on github
    Last edited by dimigon (2012-09-20 14:35:28)

  • Prime LMS 4.2 installation with solaris 10 volume manager

    Hello
    Is it possible to use Solaris Volume Manager for disk mirroring in prime LMS 4.2 installation over sparc arquitecture?
    This is intended for having hard disk redundancy support.
    Is there any documented reference?
    O.S. Solaris 10 08/11
    Cisco prime LMS 4.2
    Regards

    They were not tested together, and I recommend they not be installed on the same zone instance (due to potential conflicts).  Now, if you're certain you have a server that can accommodate both suites (in terms of resources), create separate zones for each suite.  This will eliminate the conflict possibility while still giving you one overall physical machine to manage.

  • Veritas volume manager needed?

    any one has veritas volume manager for unix systems? can you make me a copy? i'll pay you some money too? i need it for a practice only?
    my email address is : [email protected]
    thanks.

    Getting an image to you will mean nothing if you don't get a license key anyway, and that you have to get from Veritas.

  • SVM equivalent command for veritas volume manager "VXEVAC" command

    Hi All
    I am working on a major migration project , where servers are heterogenous with part of servers with Veritas volume manager and rest with Solaris volume manager.
    Migration is quite easy on Veritas servers using "VXEVAC COMMAND " i can easily move my data to new luns
    But need to know any equivalent procedure in SVM. ..
    all servers with latest solaris 10
    Quick reply is highly appreciated.
    Rgds
    Md

    Hello,
    I�m not an expert on volume management, but maybe these considerations that come to my mind can help you to improve your performance:
    1.- The interlace size of the striping. You should adjust the size of the striping to match the I/O requests made by the Operating System or by the database management software (is the data access in a raw mode?). For example, if the data access is made through normal ufs access, the stripping size should match the block size of the file system.
    2.- Are those disks on different controlers? Maybe a saturation of the controler, of the bus, etc... could slow down your I/O read/writes.
    Bye,
    jmiturbe

  • Volume Manager RAID-1 maintance procedures for X2100

    Hi all,
    we are using the new Sun Fire X2100 with Solaris 10 and a Volume Manager RAID-1 configuration.
    Configuring Mirroring with Volume Manager isn't complicated at all (apart from some tricks necessary on x86 systems).
    Does anybody know how to properly handle maintenance situations. We would like to replace a faulty disk without a need for restarting the system, switching it off or changing to single user mode. Cause the X2100's two drives are hot swappable, in principle, this should be possible, isn't it?
    Thanks in advance
    Regards,
    gb

    Hi all,
    we are using the new Sun Fire X2100 with Solaris 10 and a Volume Manager RAID-1 configuration.
    Configuring Mirroring with Volume Manager isn't complicated at all (apart from some tricks necessary on x86 systems).
    Does anybody know how to properly handle maintenance situations. We would like to replace a faulty disk without a need for restarting the system, switching it off or changing to single user mode. Cause the X2100's two drives are hot swappable, in principle, this should be possible, isn't it?
    Thanks in advance
    Regards,
    gb

  • Suggestion for dbus, hal. new gnome-volume-manager-version.

    Heya,
    I just installed dbus, hall from cvs and gnome-volume-manager from tarball and have some suggestions:
    dbus:
    the default during configure seems to be to detect if you have the necessary things installed and based on that enable a component.
    To disbale qt-bindings add:
    --disable-qt
    to configure, else it will try to compile the qt-bindings and without a libGL.la it won't work ... (and this isn't in the Mesa package or wasn't anyway as far as I can tell).
    hal:
    could you add the option "--enable-fstab-sync" to configure in the new versions? It seems to be usefull . It can be it wasn't available earlier ...
    gnome-volume-manager:
    I just upgraded to 0.9.9 If anyone wants to have the binary just tell me where to upload.
    greetz,
    Michel

    Michel wrote:
    Heya,
    I just installed dbus, hall from cvs and gnome-volume-manager from tarball and have some suggestions:
    dbus:
    the default during configure seems to be to detect if you have the necessary things installed and based on that enable a component.
    To disbale qt-bindings add:
    --disable-qt
    to configure, else it will try to compile the qt-bindings and without a libGL.la it won't work ... (and this isn't in the Mesa package or wasn't anyway as far as I can tell).
    there are solutions on this forum to fix the libGL.la. this file will be included with future builds of xorg/xfree86. NVIDIA drivers should also provide this file. this file is only an issue for building.
    file a bug report feature report to add this build option to the package
    hal:
    could you add the option "--enable-fstab-sync" to configure in the new versions? It seems to be usefull . It can be it wasn't available earlier ...
    if this package is in one of the three official repos file a feature request.
    gnome-volume-manager:
    I just upgraded to 0.9.9 If anyone wants to have the binary just tell me where to upload.
    if a package has just fallen out of date up to about two week leave time for the maintainer to upgrade it .  you can flage the package out of date via the web page. this is way better than offering it to people or uploading it somewhere.
    the flag otu of date feature is always a better option to cluttering the list with update requests and the bug tracker is the best way to convey your wanted build changes. alot of the developers do not frequent this forum but all are member of the bug tracker notification system.

  • Can't use built in volume manager in PCMan File Manager

    Trying to use the built in volume manager in PCMan FM causes 2 error messages to appear.  They are unreadable (the title bar says "Unable t" that's it).  An error like the one that follows appears in the the console (or whatever Eterm is) for each:
    (pcmanfm:3084): Gtk-WARNING **: Failed to set text from markup due to error parsing markup: Error on line 1 char 57: '-' is not a valid character following a '<' character; it may not begin an element name
    After those a third message box appears and says: "Directory doesn't exist".  That box is not accompanied by any error text on the console.
    I assume the first to say something like "Unable to mount" but I don't know WHY.
    The problem does NOT occur if I mount it as root (using sudo) and access it that way.  This however then requires any further access to be made as root if anything useful is to be done with the drive (copying files, writing to it, etc.)
    I'm running Fluxbox as my WM, if that matters.
    Thanks in advance!

    Hmm...the wiki refers to files I don't have.  /etc/hal/fdi/policy and /etc/hal/fdi/information are both empty directories (even when viewed as root).  Any thoughts?
    I feel like an idiot now.  I should have guessed i needed to put those files in.
    Last edited by guitarMan666 (2009-04-22 03:22:36)

  • Volume Manager in Solaris 10

    Hi All -
    I loaded Solaris 10 OS on two separate disks to be managed by RAID. The idea was that if one disk OS crashes, then RAID will switch me to the other disk and I should be able to boot from that without major loss in operational time of the node. For such a scenario, do I need to have Veritas Volume Manager or does Solaris 10 come with an default volume manager which will do this for me.
    Your help is greatly appreciated.
    Regards

    RTFM :-)
    http://docs.sun.com/app/docs/doc/816-4520
    alan

  • How do you change volume permissions with Solaris Volume Manager?

    (Previously posted in "Talk to the Sysop" - no replies)
    I'm trying to set up Solaris 9 to run Oracle on raw partitions. I have my design nailed down and I have built all the raw partitions I need as soft partitions on top of RAID 1 volumes. All this is built using Solaris Volume Manager (SVM).
    However, all the partitions are still owned by root. Before I can create my Oracle database, I need to change the owner of the Oracle partitions to oracle:oinstall. The only reference I found telling me how to do this was in a Sun Blueprint and it essentially said "You can't change volume permissions directly or permanently using SVM and chown will only remain effective until the next reboot. To make the changes permanent, you must modify /etc/minor_perm". Unfortunately, I can't find an example of how to do this anywhere and the online man pages are not particularly helpful (at least not to me).
    I'd appreciate a quick pointer, either to a good online resource or, even better, a simple example. For background, the volumes Oracle needs to own are:
    /dev/md/rdsk/d101-109
    /dev/md/rdsk/d201-203
    /dev/md/rdsk/d301-303
    /dev/md/rdsk/d401-403
    /dev/md/rdsk/d501-505
    I provide this information because I'd like to assign some, but not all, of the devices under /dev/md/rdsk to the oracle user and I was hoping some smart person out there could illustrate an approach using simle regular expressions, at which I'm horribly poor.
    Thanks in advance,
    Adrian

    Ron, I feel your pain.  I just came from an HTC also and a lot of stuff with this iPhone is bugging the crap out of me.  Who makes a phone where you can't adjust the ringer and alert volumes independently?  Instead, I have to adjust the alert volume when it is active.  C'mon guys.  Get with the program.  You won a bunch of Android users over with the 4S, but you're going to chase us all back when we're done with our contract.  Frustrating.  

  • Unable to Initialize Volume Manager from a Configuration File

    I'd like to reattach a D1000 to a rebuilt system. The array contains a raid 5 partition that was built with Solaris Volume Manager (Solaris 9). Since it is the same system all controller/target/slice ids have not changed. I was able to restore the Volume Manager configuration files (/etc/lvm) from a tape backup and followed the instructions provided in the Solaris Volume Manager Administration Guide: How to Initialize Solaris Volume Manager from a Configuration File <http://docs.sun.com/db/doc/816-4519/6manoju60?a=view>.
    All of the state database replicas for this partition are contained on the disks within the array so I began by creating new database replicas on a local disk.
    I then copied the /etc/md.cf file to /etc/md.tab
    # more /etc/lvm/md.tab
    # metadevice configuration file
    # do not hand edit
    d0 -r c1t10d0s0 c1t11d0s0 c1t12d0s0 c1t8d0s0 c1t9d0s0 c2t10d0s0 c2t11d0s0 c2t12d0s0 c2t8d0s0 c2t9d0s0 -k -i 32b -h hsp000
    hsp000 c1t13d0s0 c2t13d0s0
    I then tested the syntax of the md.tab file (this output is actually from my secomd attempt).
    # /sbin/metainit -n -a
    d0: RAID is setup
    metainit: <hostname>: /etc/lvm/md.tab line 4: hsp000: hotspare pool is already setup
    Not seeing any problems I then attempted to recreate the d0 volume, but it fails with the error below:
    # /sbin/metainit -a
    metainit: <hostname>: /etc/lvm/md.tab line 3: d0: devices were not RAIDed previously or are specified in the wrong order
    metainit: <hostname>: /etc/lvm/md.tab line 4: hsp000: hotspare pool is already setup
    Any suggestions on how to reinitialize this volume would be appreciated.
    Thanks, Doug

    You have UserPrincipalName column heading in the csv file so this should be your cmdlet.
    import-csv C:\temp\sharedMailboxCreationTest.csv | ForEach-Object {New-Mailbox -shared  -Name $_.Name  -Alias $_.Alias  -OrganizationalUnit $_.OrganizationalUnit -UserPrincipalName $_.UserPrincipalName -Database $_.Database}
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

Maybe you are looking for