Volume quit working after installing Yosemite.

After installing Yosemite on my new macbook pro I noticed that my volume controls didn't work on the keyboard and were "grayed" out on the task bar and in system preferences and unusable. I restarted the computer and they came back on. Now I notice that many times when I start the computer it happens again and can only be fixed by restarting the computer again. Any suggestions?

Right, App Store Support solved my problem.(iPhoto & iMovie were packaged with my iMac when I bought it. Upgrading from Mountain Lion to Yosemite wiped that out, and these apps did not show up in my purchased list. This would not have happened if Maverick had been installed prior to Yosemite.)

Similar Messages

Generic PDF writer. Stopped working after installing Yosemite.

Generic PDF Writer stopped working after installing Yosemite. Can anyone help??

Yes, checked. The system is up to date.

Illustrator CC 2014 open and place commands not working after installing Yosemite

How can I get Illustrator Open and Place commands to work after installing Yosemite?

Hello,
I also have the same problem, after 5 minutes I can't open or place anything in illustrator. I have this problem also in photoshop cc 2014. This started after installing Yosemite.
Tried to reinstall but nothing helps.
Today after updating creative cloud application it is even worse: illustrator is not opening anything: not even a new file. So I reinstalled... and I can open again for 5 minutes. But then it crashed while saving. Now I can't open illustrator at all...so nothing left to do then reinstalling again I suppose?

ICal Availability Panel Not Working After Installing Yosemite

The availability panel for my corporate calendar no longer works after installing Yosemite. I get a message that says "This calendar does not support availability." This was working before I installed Yosemite. Is there a configuration I need to change?

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

IMessage not working after installing Yosemite

When trying to log into iMessage after installing Yosemite I get this message "Your Apple ID "[email protected] can't be used to set up iMessage at this time." It works fine on my iPhone and iPad. Please help.

about message http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755
troubleshooting activation http://support.apple.com/kb/TS4268

IPhoto not working after installing Yosemite

After installing Yosemite the iPhoto icon on the dock has a circle/line symbol superimposed. Get a message saying iPhoto needs to be updated, but when I try to update I get "Update unavailable for this Apple ID." (I have used my current Apple ID at least since 2011, and have used it to update iPhoto previously.)

Right, App Store Support solved my problem.(iPhoto & iMovie were packaged with my iMac when I bought it. Upgrading from Mountain Lion to Yosemite wiped that out, and these apps did not show up in my purchased list. This would not have happened if Maverick had been installed prior to Yosemite.)

Dreamweaver CS5 quits unexpectedly after installing Yosemite but other programs work

After installing OS X Yosemite 10.10.1 on my Macbook Pro, Dreamweaver CS5 will load part way and then crash. Other programs seem to load just fine and I don't know what to do.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,4
Processor Name: Intel Core 2 Duo
Processor Speed: 2.53 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP53.00AC.B03
SMC Version (system): 1.49f2
The crash report says;
Crashed Thread:        0 Dispatch queue: com.apple.main-thread
Exception Type:        EXC_BAD_ACCESS (SIGBUS)
Exception Codes:       KERN_PROTECTION_FAILURE at 0x0000000000eade3e
Any ideas on a fix?
Thanks in advance!

CS5 wasn't specifically mentioned in the compatibility FAQ.
Mac OS X Yosemite (10.10) compatibility FAQs | CC
Try running the CC Cleaner Tools below followed by a software re-install.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Nancy O.

Why does my mail not work after installing Yosemite?

I just installed Yosemite. Right after when I tried to open my mail, it right away wants to download all my mail. Then it fails in doing so and says to continue in order to launch Mail Import Assistant. Then I push Continue, and it then says; "Your mail has been damaged. To repair it, quit mail. Says mail will repair itself the next time I open mail. But then I tried to open mail and it goes back to the fail...vicious circle and getting nothing solved. Help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Ethernet quit working after installing Lion

I had a clean install of Lion and everything seemed to be working well. All of a sudden, after three days, my ethernet connection quit working. I can continue to connect through my Airport. I tried another computer on my wired network and it worked fine so I know the network is not at fault. Connecting the ethernet cable causes me to lose my connection even with Airport on. Any ideas?

Just got a call from the Apple Service rep. His solution worked-no idea why, but he said the problem was in some sort of "confusion" caused by the Location identification for the ethernet connection after the upgrade to Lion. Steps to fix the problem:
- Open System Preferences-Network
- Turn off Wi-Fi
- Select Ethernet and delete the connection (hit the - button at the bottom left)
- Hit the + button to establish a new connection. Select Ethernet in the dropdown next to Interface. Hit Create
- Select the Assist me... button at bottom, and then press the Assistant... button on the popup
- An Introduction screen appears which has a box with a Location designated for the new connection
- Hit Continue
- Select the appropriate modem being used to connect to the internet and hit Continue
- Hit Continue on the next screen
- Do not fill in any of the information on the screen that appears. Hit the Go Back button and then close out the Network Setup Assistant. Apparently, by going this far, you've established a new Location so no need to complete the setup if you've had an internet connection which was working.
At this point you're back on the Network Preferences screen, and my Ethernet connection reflected that I was connected and had an IP address. When I opened Safari and Chrome, both opened correctly with my home page and all seemed back to normal. I'll repost if the connection does not hold.
I hope this helps others with this problem.

Iphoto does not work after instaling yosemite

I installed Yosemite, everything works fine, but iphoto keeps on crashing en does not load my photo's.

As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?

My dvd quit working after installing mountain lion

It was working fine before I installed Mountain Lion. It took the disk in and then ejected it. Now it acts like it is completely dead - like something just turned it off. I've never used the drive that much. It's a mid to late 2010 aluminum iMac.

Tried alot of things, but it finally started working after resetting the SMC controller - go figure...

Iworks 09 quit working after install mountain lion

After installing Mount Lion, i had a probelm with my time machine drive and lost my previous Iworks apps. I went hunging for my CD but alas is nowhere to be found. The Iworks applications launch but can not open any files. see screen capture of typical error dialog box.
I probably will need to buy iWorks 11 to fix this but was hoping for an alternate solution.
Thanks
Bob

Tried alot of things, but it finally started working after resetting the SMC controller - go figure...

Almost all program shortcuts quit working after installing Quick Time 7

After installing Quick time 7, I noticed that all my desktop icons and menu icons except for a few windows 7 programs had changed to the quick time icon. When I clicked on that icon, I got the message that quick time did not recognize that program and could not open it. I cannot even access system restore
does anyone know how to repair this short of doing a complete re-install of Windows 7 (32 bit) and reinstalling all of the programs?

Are you able to get through to your System Restore if you start the PC in Safe mode?
[Start your computer in safe mode|http://windows.microsoft.com/en-us/windows7/Start-your-computer-in-safe-mo de]

Preview software not working after installing yosemite. need help

I have to regularly use pdf files for university work but from the moment i have updated to Yosemite, Preview software suddenly stops and prompts error opening and so i have to download other software or use different method to read but i don't want to install apps when i already have one. So please help me.

Please reinstall Yosemite.
Reinstall Lion, Mountain Lion, Mavericks or Yosemite without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, Mavericks, or Yosemite
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Vuze not working after installing Yosemite

I did an upgrade from Mountain Lion to yosemite today after months of putting it off. Everything went great, mail is working etc and all looking good. Except Vuze - it will not open at all. i kept getting a message to install the latest Java, which I did and still not working. I googled the problem and lots of people talking about using a different installer and providing the link, so I did that one too. At the end it said Vuze has been installed successfully. But when i click on the icon at the bottom of my screen it still gives me the error message 'To open Fuze you need to install the legacy Java SE 6 runtime'. Then when i click More info, I'm back to where i started. Please help - and I want to be able to save my library of course too. All my files are on an external hard drive and I run time machine regularly.
I'm not very technically savvy, so any help and advice would be much appreciated. Please help me get my Vuze working again. Thank you.

Right, App Store Support solved my problem.(iPhoto & iMovie were packaged with my iMac when I bought it. Upgrading from Mountain Lion to Yosemite wiped that out, and these apps did not show up in my purchased list. This would not have happened if Maverick had been installed prior to Yosemite.)

Volume quit working after installing Yosemite.

Similar Messages

Maybe you are looking for