WAAS IP ACL not matching traffic

Hi,
i'm trying to configure some ip access-lists on a WAAS but it seems that it's not matching the traffic.
interface InlineGroup 1/0 inline vlan all
ip access-group test in exit
ip access-list extended test deny icmp any any
exit
Im still able to ping wherever i want.
Any ideas? Or is it not possible to handle traffic with ACLs like that on WAAS?
Thanks,
Markus

Hi Markus,
Interface ACL—Applied on the built-in, port channel, standby, and inline group interfaces. This type of ACL is intended to control management traffic (Telnet, SSH, and Central Manager GUI). The ACL rules apply only to traffic that is destined for the WAE or originates from the WAE, not WCCP transit traffic. Use the
ip access-group interface configuration command to apply an interface ACL.
As explained above the ACL rule apply only to traffic destined to the WAE or originated from the WAE and not for transit traffic. Hope this helps.
Thanks,
Rajesh

Similar Messages

  • No ACL deny logs for Traffic not matched by Static Object NATs and ACL. Need Help.

    I start noticing that I do not see any denied traffic coming in on my ACL.  To better explain, lets say I have this config.
    ### Sample Config ###
    object network webserver
    host 192.168.1.50
    nat (dmz, outside) static X.X.X.X service tcp www www
    access-list inbound extended permit ip any4 object webserver eq www
    If I generate a traffic from the outside let's say a traffic that is trying to access X.X.X.X via TCP Port 8080 which obviously does not have any NAT entry to it going to my DMZ, I don't see the ACL denies it anymore but instead comes back with a Drop Reason: (nat-no-xlate-to-pat-pool) . On the packet trace I got this. (Below) it seems that does not even hit the ACL as there is no xlate found for it, at least to what the drop reason says.
    Phase: 1
    Type: CAPTURE
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    MAC Access list
    Phase: 2
    Type: ACCESS-LIST
    Subtype:
    Result: ALLOW
    Config:
    Implicit Rule
    Additional Information:
    MAC Access list
    Phase: 3
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   0.0.0.0         0.0.0.0         Outside
    Result:
    input-interface: Outside
    input-status: up
    input-line-status: up
    output-interface: Outside
    output-status: up
    output-line-status: up
    Action: drop
    Drop-reason: (nat-no-xlate-to-pat-pool) Connection to PAT address without pre-existing xlate
    Before, using a regular Static PAT on ASA Versions 8.2(5) below, I could get the deny logs (ASA-4-106023). Generally, I use these logs, and are quite important for us specially during auditing.
    My question is how can I generate logs for these type of dropped traffic on the ASA 9.1 Version? 
    Any comments/suggestions are gladly appreciated :)
    Regards,
    John

    I believe, but am not 100% sure, that the reason you are not seeing the ACL drop but a no NAT matched is because of the changes from 8.2 to 8.3 in the order of how things are done.  In 8.3 and later you need to secify the real IP address when allowing packets in, and this is because NAT happens before the ACL is matched.  So since there is no match on the NAT the packet is dropped then and there, never reaching the stage where ACLs are checked.
    As to seeing drops in the ACL log...You might want to try adding an ACL that matches the NATed IP...but I don't think you will have much success with that either.  My guess is that there is no way around this...at least no way I know of.
    Please remember to select a correct answer and rate helpful posts

  • RV120W: The user attempted to connect using a dial-in medium that did not match the restricted dial-in media

      I am trying to configure a Cisco RV120W wireless using RADIUS. The IAS server is Windows 2003. The wireless client can’t access the wireless.  The ISA server keeps getting this error: Event Type: Warning Event Source: IAS Event Category: None Event ID: 2 User: N/A Computer: DEVICES1 Description: User ntdomain\blin was denied access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.30.102 NAS-Identifier = Called-Station-Identifier = Calling-Station-Identifier = Client-Friendly-Name = RV102-Domain Client-IP-Address = 10.0.30.102 NAS-Port-Type = NAS-Port = Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = EAP EAP-Type = Reason-Code = 70 Reason = The user attempted to connect using a dial-in medium that did not match the restricted dial-in media. Check the dial-in constraints for the matching remote access policy. The public wireless and WPA2 work fine. Other Cisco 1240 wireless works fine with this event: Event Type: Information Event Source: IAS Event Category: None Event ID: 1 Date: 10/18/2013 Time: 1:33:19 PM User: N/A Computer: DEVICES1 Description: User blin was granted access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.20.103 NAS-Identifier = WLC2504 Client-Friendly-Name = WLC2504 Client-IP-Address = 10.0.20.103 Calling-Station-Identifier = 90-18-7c-e6-95-aa NAS-Port-Type = Wireless - IEEE 802.11 NAS-Port = 1 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = PEAP EAP-Type = Secured password (EAP-MSCHAP v2) Can you help?                  

    Dear Customer,
    Thank you for reaching the Small Business Support Community.
    The RADIUS configuration settings are intended to authenticate the wireless clients attempting to connect through a SSID and if this is the problem you have, I first suggest you to check on the RADIUS server IP address (Security>RADIUS Server), make sure it is reachable, and the authentication port number used by this server to send traffic and the shared key used to authenticate to the server which must match on both sides.  If all that is good, try using WAP Enterprise as the wireless security method and not WAP2 Enterprise.
    If the problem persits I then first suggest to to make sure you run the latest firmware release version 1.0.5.6;
    http://software.cisco.com/download/release.html?mdfid=282981372&flowid=796&softwareid=282487380&release=1.0.5.6&relind=AVAILABLE&rellifecycle=&reltype=latest
    Then contact support if the problem persists; (the "dial-in medium" part error I just don't understand what it has to do with the RADIUS wireless client authentication);
    https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
    Please do not hesitate to reach me back if there is any further assistance I may assist you with in the meantime.
    Kind regards,
    Jeffrey Rodriguez S. .:|:.:|:.
    Cisco Customer Support Engineer
    *Please rate the Post so other will know when an answer has been found.

  • Cisco 881 ISR IPSec VPN Tunnel does not pass traffic from the vlan.

    I have a cisco 881 ISR Router with a site-to-site IPsec vpn tunnel to a mikrotik device on the other end (I inherited this from my client). The tunnel is constructed properly and is up, however traffic does not pass or get routed to the FA4 interface. I see in my packet captures that it hits the vlan1 interface (vlans are required on the L2 ports) and does not pass to the tunnel.
    This is my configuration:
    141Kerioth#sh config
    Using 3763 out of 262136 bytes
    ! Last configuration change at 01:02:41 UTC Mon May 26 2014 by admin
    version 15.2
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname 141Kerioth
    boot-start-marker
    boot-end-marker
    logging buffered 51200 warnings
    aaa new-model
    141Kerioth#do wr mem
                  ^
    % Invalid input detected at '^' marker.
    141Kerioth#wr mem
    Building configuration...
    [OK]
    141Kerioth#sh run
    Building configuration...
    Current configuration : 5053 bytes
    ! Last configuration change at 01:38:06 UTC Mon May 26 2014 by admin
    version 15.2
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname 141Kerioth
    boot-start-marker
    boot-end-marker
    logging buffered 51200 warnings
    aaa new-model
    aaa authentication login default local
    aaa authentication ppp default local
    aaa session-id common
    memory-size iomem 10
    crypto pki trustpoint TP-self-signed-580381394
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-580381394
     revocation-check none
     rsakeypair TP-self-signed-580381394
    crypto pki certificate chain TP-self-signed-580381394
     certificate self-signed 01
      30820229 30820192 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
      30312E30 2C060355 04031325 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 35383033 38313339 34301E17 0D313430 35323231 38323333
      365A170D 32303031 30313030 30303030 5A303031 2E302C06 03550403 1325494F
      532D5365 6C662D53 69676E65 642D4365 72746966 69636174 652D3538 30333831
      33393430 819F300D 06092A86 4886F70D 01010105 0003818D 00308189 02818100
      B001A012 2CA6970C 0648798B 2A786704 84F2D989 83974B19 9B4287F2 4503D2C9
      173F23C4 FF34D160 202A7565 4A1CE08B 60B3ADAE 6E19EE6E 9CD39E72 71F9650E
      930F22FE C4441F9C 2D7DD420 71F75DFC 3CCAC94E BA304685 E0E62658 A3E8D01C
      D01D7D6A 5AF0B0E6 3CF6AF3A B7E51F83 9BF6D38E 65254E1F 71369718 ADADD691
      02030100 01A35330 51300F06 03551D13 0101FF04 05300301 01FF301F 0603551D
      23041830 168014D6 24878F12 1FFADF2F 537A438E 6DD7FB6B D79E4130 1D060355
      1D0E0416 0414D624 878F121F FADF2F53 7A438E6D D7FB6BD7 9E41300D 06092A86
      4886F70D 01010505 00038181 00771667 FCA66002 8AB9E5FB F210012F C50B586F
      9A9640BB 45B4CEFD 030A38C0 E610AAC8 B41EF3C4 E55810F9 B2C727CF C1DEFCF1
      0846E7BC 1D95420E 5DADB5F8 EFE7EB37 B5433B80 4FF787D4 B1F2A527 06F065A4
      00522E97 A9D2335C E83C4AE1 E68D7A41 9D0046A7 ADCC282B 7527F84D E71CC567
      14EF37EA 15E57AD0 3C5D01F3 EF
            quit
    ip dhcp excluded-address 10.0.16.1
    ip dhcp pool ccp-pool
     import all
     network 10.0.16.0 255.255.255.0
     default-router 10.0.16.1
     dns-server 8.8.8.8
     lease 0 2
    ip domain name kerioth.com
    ip host hostname.domain z.z.z.z
    ip name-server 8.8.8.8
    ip name-server 4.2.2.2
    ip cef
    no ipv6 cef
    license udi pid CISCO881-K9 sn FTX180483DD
    username admin privilege 15 secret 4 CmmfIy.RPySmo4Q2gEIZ2jlr3J.bTBAszoe5Bry0z4c
    username meadowbrook privilege 0 password 0 $8UBr#Ux
    username meadowbrook autocommand exit
    policy-map type inspect outbound-policy
    crypto isakmp policy 1
     encr 3des
     authentication pre-share
     group 5
    crypto isakmp key 141Township address z.z.z.z
    crypto isakmp keepalive 10
    crypto ipsec transform-set TS esp-3des esp-sha-hmac
     mode tunnel
    crypto map mymap 10 ipsec-isakmp
     set peer z.z.z.z
     set transform-set TS
     match address 115
    interface Loopback0
     no ip address
    interface Tunnel1
     no ip address
    interface FastEthernet0
     no ip address
    interface FastEthernet1
     no ip address
    interface FastEthernet2
     no ip address
    interface FastEthernet3
     no ip address
    interface FastEthernet4
     description $FW_OUTSIDE_WAN$
     ip address 50.y.y.y 255.255.255.240
     ip nat outside
     ip virtual-reassembly in
     duplex auto
     speed auto
     crypto map mymap
    interface Vlan1
     description $ETH_LAN$
     ip address 10.0.16.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
     ip tcp adjust-mss 1452
    ip forward-protocol nd
    ip http server
    ip http access-class 23
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip nat inside source list 115 interface Vlan1 overload
    ip nat inside source list 199 interface FastEthernet4 overload
    ip nat inside source route-map nonat interface FastEthernet4 overload
    ip route 0.0.0.0 0.0.0.0 50.x.x.x
    access-list 110 deny   ip 10.0.16.0 0.0.0.255 10.0.1.0 0.0.0.255
    access-list 110 permit ip 10.0.16.0 0.0.0.255 any
    access-list 115 permit ip 10.0.16.0 0.0.0.255 10.0.1.0 0.0.0.255
    access-list 144 permit icmp host c.c.c.c host 10.0.1.50
    access-list 144 permit icmp host p.p.p.p host 10.0.16.105
    access-list 199 permit ip a.a.a.a 0.0.0.255 any
    no cdp run
    route-map nonat permit 10
     match ip address 100
    line con 0
     no modem enable
    line aux 0
    line vty 0 4
     access-class 1 in
     exec-timeout 30 0
     privilege level 15
     transport preferred ssh
     transport input ssh
    line vty 5 15
     access-class 23 in
     privilege level 15
     transport input telnet ssh
    cns trusted-server all-agents x.x.x.x
    cns trusted-server all-agents hostname
    cns trusted-server all-agents hostname.domain
    cns id hardware-serial
    cns id hardware-serial event
    cns id hardware-serial image
    cns event hostname.domain 11011
    cns config initial hostname.domain 80
    cns config partial hostname.domain 80
    cns exec 80
    end

    Why do you have following command on the PIX?
    crypto map outside_map 40 set transform-set 165.228.x.x
    Also you have this transform set on the PIX:
    crypto ipsec transform-set 10.112.60.0 esp-aes-256 esp-sha-hmac
    This does not match the transfor set on the router:
    crypto ipsec transform-set tritest esp-3des esp-md5-hmac
    Where are you using the access-list/route-map
    101 ?

  • Incoming Oracle-Auth-Token does not match

    <Aug 15, 2012 2:27:36 PM SGT> <Error> <oracle.portal.page> <BEA-000000> <Unexpected exception in servlet
    java.lang.IllegalStateException: Incoming Oracle-Auth-Token does not match.
         at oracle.webdb.page.PageBuilder.processUMDRequest(Unknown Source)
         at oracle.webdb.page.PageBuilder.process(Unknown Source)
         at oracle.webdb.page.Main.doRequest(Unknown Source)
         at oracle.webdb.page.ParallelServlet.doGet(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
         at oracle.webdb.portal.servlet.PortalServlet.doGet(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    Anyone know the cause of the error?

    Try the My Oracle Support search functionality - this will get you to Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1075472.1]1075472.1, "XML Parsing Error: Syntax Error, Line Number 1, Column 1" and "Oracle-Auth-Token Does Not Match Error" When Accessing Portal 11g.
    Thanks,
    EJ

  • Any issue using WAAS to optimize 6500 SPA traffic?

    I have a pilot that does data replication (FCIP) across a service-provider 1 gig link (100 miles). All customer data gets encrypted using 6500 SPA adaptors. Does anyone see any issue, or has anyone had experienced with optimizing (TFO) with WAAS traffic in-betweem SPAs? For ease of pilot deployment, we are using in-line WAEs and there is other traffic they'd like to optimize other than the FCIP, so placing the WAE's before the 6500 SPA adaptors is not a real option.
    THANKS!

    I have a pilot that does data replication (FCIP) across a service-provider 1 gig link (100 miles). All customer data gets encrypted using 6500 SPA adaptors. Does anyone see any issue, or has anyone had experienced with optimizing (TFO) with WAAS traffic in-betweem SPAs? For ease of pilot deployment, we are using in-line WAEs and there is other traffic they'd like to optimize other than the FCIP, so placing the WAE's before the 6500 SPA adaptors is not a real option.
    THANKS!

  • BT Usage Meter Reading Does not Match Home Hub3 Tr...

    Why am I unable to match my Home Hub3 Traffic Statistics with BT's Usage Meter?
    Currently BT Usage Meter claims I have used 4.93 G bytes over the last 11 days whilst the HUB3 states that only 4.10 G bytes of traffic has been uploaded & downloaded in the same period>
    Robin J Allison CEng, FBCS, CITP, MIEEE, ITU, CITT

    I think the only way they would be close to matching is if HH3 was reset by yourself at the midnight start of the charging period. Even then this is not infallible as the figures would not match, if the hub reset for another reason during the check period. 
    Its also worth noting that HH3 (mine and others I have readabout) reset the data when 5Gb download occurs. I am not sure if the same applies to uploads.
    Steve

  • Open Item and Line Items are not matching

    Hi Gurus,
    I ran the EFT for vendor #1600109 for payment on 10/18/07.  If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403). 
    When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403). 
    User wants the open item report should tally the line item display.
    I will assign good points.
    Thanks for your help
    Prashanth

    Hi Gurus,
    EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
    We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
    Clearning date is 18th
    Posting Date is 15th.
    Thanks
    Prashanth

  • I am trying to activate root account on my MAC.  The directions I've seen do not match what is in System Preference for Accounts or Users

    I am trying to activate the root account on my new Mac Book Pro.  The instructions that I have found do not match what I have in System Preferences.  What is the process when using Users and Groups.  When I click on Join the Network Account Server- Open Directory Utility I don't see a option to  activate root user as the instructions say at http://support.apple.com/kb/HT1528
    OS X Lion
    From the Apple menu choose System Preferences....
    From the View menu choose Users & Groups.
    Click the lock and authenticate as an administrator account.
    Click Login Options....
    Click the "Edit..." or "Join..." button at the bottom right.
    Click the "Open Directory Utility..." button.
    Click the lock in the Directory Utility window.
    Enter an administrator account name and password, then click OK.
    Choose Enable Root User from the Edit menu.
    Enter the root password you wish to use in both the Password and Verify fields, then click OK.

    Do you mean you cannot select "Enable Root User" from the "Edit" menu as shown below?
    Why do you think you need to enable the root user? I've never needed it in the history of OS X.

  • CO-PA Cost Component do not match with Standard Cost Component Values

    Dear Members,
    The CO-PA Cost Components (as mapped through KE4R), do not match with Standard Cost Component values for the Group Currency. In local currency the values match.
    System is correctly picking up VPRS value, both in local currency and Group Currency, which is equal to the total of Standard Cost Components however, it is the Value Fields linked to the Standard Cost Components in Group Currency that do not match.
    In KE40, the Indicator is 4:Released Standard Cost Estimate matching Goods issue Date.
    I have verified KEPH/CKMLPKEPH tables. The values are same as that of VPRS.
    Any help/clues?
    Regards
    Satya

    Hi,
    In case of billing documents the group valuation approach is managed in the data structures of the legal valuation in additional value fields. To control costs and revenues in the different views separately, you must create additional value fields and assign them to the data structures.
    The field contents must be filled via the CO-PA user exit, they cannot be entered by assigning conditions to value fields. The profit center valuation is updated in a separate ledger. No separate value fields are necessary.
    The exit to be used is function module 'EXIT_SAPLKEII_002' ( enhancement COPA0005 ). Within the exit you have the complete SD data avaialble in the tables 'T_ACCIT' and 'T_ACCCR'. The conditions can be found in T_ACCIT and the corresponding values ( linked via 'POSNR' ) in table T_ACCCR. The PA line item and the corresponding SD item in table ACCIT
    can be mapped via the line item field 'RPOSN' and the field 'POSNR_SD' in table ACCIT.
    regards
    Waman

  • Any idea what this errorr means? the data type of the reference does not match the data type of the variable

    I am using Veristand 2014, Scan Engine and EtherCat Custom Device.  I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.  
    I created a new Veristand project
    I added the Scan Engine and EtherCat custom device.
    I changed the IP address and auto-detected my modules
    i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
     So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
    Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
    Any thoughts?
    Start Date: 4/10/2015 11:48 AM
    • Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
    • Initializing TCP subsystem...
    • Starting TCP Loops...
    • Connection established with target Controller.
    • Preparing to synchronize with targets...
    • Querying the active System Definition file from the targets...
    • Stopping TCP loops.
    Waiting for TCP loops to shut down...
    • TCP loops shut down successfully.
    • Unloading System Definition file...
    • Connection with target Controller has been lost.
    • Start Date: 4/10/2015 11:48 AM
    • Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
    • Preparing to deploy the System Definition to the targets...
    • Compiling the System Definition file...
    • Initializing TCP subsystem...
    • Starting TCP Loops...
    • Connection established with target Controller.
    • Sending reset command to all targets...
    • Preparing to deploy files to the targets...
    • Starting download for target Controller...
    • Opening FTP session to IP 10.12.0.48...
    • Processing Action on Deploy VIs...
    • Setting target scan rate to 10000 (uSec)... Done.
    • Gathering target dependency files...
    • Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
    • Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
    • Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
    • Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
    • Closing FTP session...
    • Files successfully deployed to the targets.
    • Starting deployment group 1...
    The VeriStand Gateway encountered an error while deploying the System Definition file.
    Details:
    Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
    Possible reason(s):
    LabVIEW: The data type of the reference does not match the data type of the variable.
    =========================
    NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
    • Sending reset command to all targets...
    • Stopping TCP loops.
    Waiting for TCP loops to shut down...
    • TCP loops shut down successfully.
    • Unloading System Definition file...
    • Connection with target Controller has been lost.

    Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef?  I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).  
    Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
    You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671  
    Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
    Kevin W.
    Applications Engineer
    National Instruments

  • SCCM 2012 R2 site server client installation error: The client version 5.00.7958.1000 does not match the MP version 5.00.7804.1000.

    Hello,
    When I try to install the client on the site server itself it gives me this error message and fails the ccmsetup. I only have this on the site server. Clients to other servers and computers are pushed fine. If I check the version of the MP it says 5.00.7958.1000
    in ADSI. I removed the MP object in CN=System, CN=System Management. Waited for it to be regenerated automatically by SCCM but the installation doesn't work still.
    I tried to install with several methods including directly from ccmsetup.exe in ccmsetup folder, pushing by sccm itself, running from commandline, ...
    I run SCCM 2012 R2 on Windows Server 2008 R2 and the database on SQL 2008 on Server 2008 R2
    Below you find the ccmsetup.log:
    <![LOG[==========[ ccmsetup started in process 5072 ]==========]LOG]!><time="07:29:25.392-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:9437">
    <![LOG[Running on platform X64]LOG]!><time="07:29:25.393-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="util.cpp:1837">
    <![LOG[Updated security on object C:\Windows\ccmsetup\cache\.]LOG]!><time="07:29:25.394-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="7532" file="ccmsetup.cpp:9281">
    <![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="07:29:25.394-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:721">
    <![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="07:29:25.395-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:727">
    <![LOG[In ServiceMain]LOG]!><time="07:29:25.397-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:3365">
    <![LOG[Running on 'Microsoft Windows Server 2008 R2 Enterprise ' (6.1.7601). Service Pack (1.0). SuiteMask = 274. Product Type = 18]LOG]!><time="07:29:25.490-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="util.cpp:1919">
    <![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="07:29:25.491-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:3590">
    <![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="07:29:25.491-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:3775">
    <![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="07:29:25.491-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:3776">
    <![LOG[SslState value: 224]LOG]!><time="07:29:25.499-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:4425">
    <![LOG[CCMHTTPPORT: 80]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8617">
    <![LOG[CCMHTTPSPORT: 443]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8632">
    <![LOG[CCMHTTPSSTATE: 224]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8650">
    <![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8668">
    <![LOG[FSP: SCCMSRV-02]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8720">
    <![LOG[CCMFIRSTCERT: 1]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8778">
    <![LOG[Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="07:29:25.513-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4539">
    <![LOG[Retry time: 10 minute(s)]LOG]!><time="07:29:25.513-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4540">
    <![LOG[MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log]LOG]!><time="07:29:25.513-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4541">
    <![LOG[MSI properties: INSTALL="ALL" SMSSITECODE="ZAV" FSP="SCCMSRV-02" DISABLESITEOPT="TRUE" SMSCACHEDIR="CACHE" SMSCACHEFLAGS="MAXDRIVE" SMSCACHESIZE="20000" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4542">
    <![LOG[Source List:]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4550">
    <![LOG[ \\SCCMSRV-02.snba.be\SMSClient]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4557">
    <![LOG[ \\SCCMSRV-02.SNBA.BE\SMSClient]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4566">
    <![LOG[MPs:]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4569">
    <![LOG[ SCCMSRV-02.snba.be]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4584">
    <![LOG[No version of the client is currently detected.]LOG]!><time="07:29:25.520-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2748">
    <![LOG[Task 'Configuration Manager Client Retry Task' does not exist]LOG]!><time="07:29:25.525-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="wintask.cpp:634">
    <![LOG[Updated security on object C:\Windows\ccmsetup\.]LOG]!><time="07:29:25.529-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:9281">
    <![LOG[Sending Fallback Status Point message to 'SCCMSRV-02', STATEID='100'.]LOG]!><time="07:29:25.530-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:9756">
    <![LOG[Failed to get client version for sending messages to FSP. Error 0x80041010]LOG]!><time="07:29:25.534-120" date="04-17-2014" component="ccmsetup" context="" type="2" thread="2724" file="ccmsetup.cpp:9838">
    <![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="07:29:25.535-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:9887">
    <![LOG[State message with TopicType 800 and TopicId {C6441082-A993-4410-9F89-D4CCB6624ED0} has been sent to the FSP]LOG]!><time="07:29:25.676-120" date="04-17-2014" component="FSPStateMessage" context="" type="1" thread="2724" file="fsputillib.cpp:752">
    <![LOG[Running as user "SYSTEM"]LOG]!><time="07:29:25.693-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1995">
    <![LOG[Detected 20167 MB free disk space on system drive.]LOG]!><time="07:29:25.693-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="util.cpp:628">
    <![LOG[Checking Write Filter Status.]LOG]!><time="07:29:25.694-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2024">
    <![LOG[This is not a supported write filter device. We are not in a write filter maintenance mode.]LOG]!><time="07:29:25.694-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2051">
    <![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=ZAV))']LOG]!><time="07:29:25.716-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="lsad.cpp:656">
    <![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert>308202EF308201D7A00302010202102F8856AD510DC3AB4F4908160FC3185E300D06092A864886F70D01010B05003016311430120603550403130B53697465205365727665723020170D3133303830373134323233325A180F32313133303731353134323233325A3016311430120603550403130B536974652053657276657230820122300D06092A864886F70D01010105000382010F003082010A0282010100DDAAEB161F4ACB759E0E56C6F784F3BEDD4DA0303B40657298A41D7F9714E112CC80272A238E605DADD2D409658211D40590BD92D0DFE4E50E8F5AF482BF747E8D00636C41F7F939EF53FA6581B173A15BE25BC24DB9E3620D78612650415DF862AFA17F75128A601A011358B27CFB9989EEBD128485F167A5E378A0A3A106DEE3DD6CE7C5804B0BA3724C4455D2EA8D646B47D989AFC7D2BACC6AD0E62FA0D6B338C2CD3B5879B4794F5D29A89ADC93489E43237E4C3BA30F645F4E4FE0E3B562ABCFC73F52C33B7D179DD10888D2EB00F6F4E121009F1CB80BCF4FA0F5CAA5BA167AE7DC0A767BC3C9031A95A42C791B100D7F15144B4FE5AC104C2BEB3EAB0203010001A3373035301D0603551D110416301482125343434D5352562D30322E736E62612E626530140603551D25040D300B06092B060104018237650B300D06092A864886F70D01010B050003820101004802B9C3A3A9EA0DB5C6624F9152C60CA38F2857691234B5FE13DDED32DB3BADF4C847F5EA097DB9918537F40A94D56A06364775E62B9F75C51189BC510EE8F2848B264C41A4E941C9CD996BEF70B9F72345BEB05F39B87BF88B3A461333BD61CD50E6E16B15709D58B78A7B385E914DF2C7949AA5BEEFC8199D69CD6DCA312DBCFE64AC43D6F13B80FED4967447532E1A65F5E0588CA7246B417DD8530E28E3DAD170F71C00B6D79645EC49332CD9F8815DB65AAB441E6C41F72C37F432E5B5E23065B6D308486C398F340B1FF2361F3C342A50EA9A02D01138BACEDCFA0E7FAA681C1FC6157797171A0593EA0ACE0BD7BBBEB26E2F34FFD461210C76669FE1</SiteSigningCert></SecurityConfiguration><RootSiteCode>ZAV</RootSiteCode><CCM> <CommandLine>SMSSITECODE=ZAV FSP=SCCMSRV-02 DISABLESITEOPT=True SMSCACHEDIR=Cache SMSCACHEFLAGS=MAXDRIVE SMSCACHESIZE=20000</CommandLine> </CCM><FSP> <FSPServer>SCCMSRV-02.snba.be</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="snba.be" /><Forest Value="snba.be" /></ClientOperationalSettings>']LOG]!><time="07:29:26.401-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="lsadcache.cpp:236">
    <![LOG[HTTP is selected for Client. The current state is 0.]LOG]!><time="07:29:26.403-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmutillib.cpp:420">
    <![LOG[The MP name retrieved is 'SCCMSRV-02.snba.be' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="07:29:26.404-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="lsadcache.cpp:334">
    <![LOG[MP 'SCCMSRV-02.snba.be' is compatible]LOG]!><time="07:29:26.404-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="lsadcache.cpp:339">
    <![LOG[Retrieved 1 MP records from AD for site 'ZAV']LOG]!><time="07:29:26.404-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="lsadcache.cpp:287">
    <![LOG[Retrived site version '5.00.7958.1000' from AD for site 'ZAV']LOG]!><time="07:29:26.405-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:575">
    <![LOG[SiteCode: ZAV]LOG]!><time="07:29:26.405-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2076">
    <![LOG[SiteVersion: 5.00.7958.1000]LOG]!><time="07:29:26.406-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2077">
    <![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="07:29:26.406-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2111">
    <![LOG[Deleted file C:\Windows\ccmsetup\client.msi]LOG]!><time="07:29:26.413-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:9493">
    <![LOG[Only one MP SCCMSRV-02.snba.be is specified. Use it.]LOG]!><time="07:29:26.414-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:10080">
    <![LOG[Searching for DP locations from MP(s)...]LOG]!><time="07:29:26.414-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:11018">
    <![LOG[Current AD site of machine is DAT]LOG]!><time="07:29:26.415-120" date="04-17-2014" component="LocationServices" context="" type="1" thread="2724" file="lsad.cpp:770">
    <![LOG[Local Machine is joined to an AD domain]LOG]!><time="07:29:26.415-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="lsad.cpp:714">
    <![LOG[Current AD forest name is snba.be, domain name is snba.be]LOG]!><time="07:29:26.419-120" date="04-17-2014" component="LocationServices" context="" type="1" thread="2724" file="lsad.cpp:842">
    <![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="07:29:26.424-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="ccmiputil.cpp:117">
    <![LOG[Begin checking Alternate Network Configuration]LOG]!><time="07:29:26.424-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="ccmiputil.cpp:1095">
    <![LOG[Finished checking Alternate Network Configuration]LOG]!><time="07:29:26.433-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="ccmiputil.cpp:1172">
    <![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
    <AssignedSite SiteCode="ZAV"/>
    <ClientPackage/>
    <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
    <ADSite Name="DAT"/>
    <Forest Name="snba.be"/>
    <Domain Name="snba.be"/>
    <IPAddresses>
    <IPAddress SubnetAddress="172.31.20.0" Address="172.31.20.101"/>
    <IPAddress SubnetAddress="172.31.105.0" Address="172.31.105.17"/>
    <IPAddress SubnetAddress="172.31.109.0" Address="172.31.109.135"/>
    </IPAddresses>
    </ClientLocationInfo>
    </ContentLocationRequest>
    ']LOG]!><time="07:29:26.441-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:96">
    <![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{76CC1A6C-D696-4C32-82D6-4F56FCA9E926}</ID><SourceHost>SCCMSRV-02</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:SCCMSRV-02:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCMSRV-02.snba.be</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-04-17T05:29:26Z</SentTime><Body Type="ByteRange" Offset="0" Length="1338"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="07:29:26.441-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:177">
    <![LOG[CCM_POST 'HTTP://SCCMSRV-02.snba.be/ccm_system/request']LOG]!><time="07:29:26.442-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
    <![LOG[Content boundary is '--aAbBcCdDv1234567890VxXyYzZ']LOG]!><time="07:29:27.999-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="httphelper.cpp:1972">
    <![LOG[Received header '<Msg SchemaVersion="1.1">
    <ID>{431A4120-7DA1-4EF2-8A6C-2EDEF4D9E169}</ID>
    <SourceID>GUID:1C3F455F-F166-4B50-BE8E-68FD4F565096</SourceID>
    <SourceHost>SCCMSRV-02</SourceHost>
    <TargetAddress>direct:SCCMSRV-02:LS_ReplyLocations</TargetAddress>
    <ReplyTo>MP_LocationManager</ReplyTo>
    <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
    <Priority>3</Priority>
    <Timeout>600</Timeout>
    <TargetHost>SCCMSRV-02</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-04-17T05:29:27Z</SentTime><Body Type="ByteRange" Offset="0" Length="2504"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature">3082019206092A864886F70D010702A08201833082017F020101310B300906052B0E03021A0500300B06092A864886F70D0107013182015E3082015A02010130373023311330110603550403130A5343434D5352562D3032310C300A06035504031303534D5302104BA58C43C476A39E491A7F539E935ED8300906052B0E03021A0500300D06092A864886F70D010101050004820100B7018B6C14F24335592C864FDFAC6E038A9B2AC9AF3819C692F3DE515F97BF701A47E8595CE6CAD80F209EFFF3B1009F5AE60858FA6839B32C36FF9514D291895613A1A447C27E2BB8B05D71775FF770FF962DCC98AD3FC0DE0D45DD6BC16C9BAB0F697EF098FFC99228E26C52E661D3F6C929FEF527383DEBFA9C15027C58BAF8A7FFE4205C0198A9163E86535716E344D5012887A6AD8F563F2528DE6BD62BF2BF20DFDA4DA061EF57E755178827DAD0CB6CFC65FF4AB235E5EAAFBA565DC1B6E4AE7C093199B95CFE792F5FA6D0625D0938DC4EAF1BE70E708864B1E79B00FB32A1E6E37CF94FF54AC10C7FF994B5945E9CA1A3FA16B2F9D35462AFFAC001</Property><Property Name="AuthSenderMachine">SCCMSRV-02;SCCMSRV-02.snba.be;</Property><Property Name="MPSiteCode">ZAV</Property></Hook></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="07:29:27.999-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="httphelper.cpp:1724">
    <![LOG[Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="ZAV" MasterSiteCode="ZAV" SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114" Signature="http://SCCMSRV-02.snba.be/SMS_DP_SMSSIG$/ZAV00114"/><ADSite Name="DAT"/><IPSubnets><IPSubnet Address="172.31.20.0"/><IPSubnet Address="172.31.109.0"/><IPSubnet Address="172.31.105.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCMSRV-02.snba.be</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="ZAV00114" FullPackageVersion="1" FullPackageHash="BFC11E099E8F451107B43E0DBEFD93B01DB2D6453DA74F8A2CB94B73D676C1CD" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30357216;2152392064" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>']LOG]!><time="07:29:28.000-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:221">
    <![LOG[Found local location 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:28.001-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:351">
    <![LOG[Discovered 1 local DP locations.]LOG]!><time="07:29:28.002-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:11153">
    <![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:28.002-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
    <![LOG[Using DP location http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114]LOG]!><time="07:29:28.009-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:11395">
    <![LOG[GET 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114/ccmsetup.cab']LOG]!><time="07:29:28.009-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
    <![LOG[C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted.]LOG]!><time="07:29:28.090-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="util.cpp:1465">
    <![LOG[Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab.]LOG]!><time="07:29:28.101-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6670">
    <![LOG[Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from manifest]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:668">
    <![LOG[Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000']LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:703">
    <![LOG[Site version '5.00.7958.1000' is compatible. Client deployment will continue.]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:726">
    <![LOG[Location 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114' passed site version check.]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6809">
    <![LOG[Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:153">
    <![LOG[Successfully loaded ccmsetup manifest file.]LOG]!><time="07:29:28.106-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:171">
    <![LOG[Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000']LOG]!><time="07:29:28.106-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:10475">
    <![LOG[Running from temp downloaded folder or manifest is not newer than ccmsetup.]LOG]!><time="07:29:28.107-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2213">
    <![LOG[Item 'i386/vcredist_x86.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.212-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'x64/vcredist_x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.269-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'i386/vc50727_x86.exe' is not applicable.]LOG]!><time="07:29:28.269-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'x64/vc50727_x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.325-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'i386/WindowsUpdateAgent30-x86.exe' is not applicable.]LOG]!><time="07:29:28.325-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'x64/WindowsUpdateAgent30-x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.380-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'i386/msxml6.msi' is not applicable.]LOG]!><time="07:29:28.380-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'x64/msxml6_x64.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.433-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'i386/msrdcoob_x86.exe' is not applicable.]LOG]!><time="07:29:28.433-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'x64/msrdcoob_amd64.exe' is not applicable.]LOG]!><time="07:29:28.434-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'pkgmgr.exe' is not applicable.]LOG]!><time="07:29:28.434-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'dism.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.504-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'wimgapi.msi' is not applicable.]LOG]!><time="07:29:28.504-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'i386/MicrosoftPolicyPlatformSetup.msi' is not applicable.]LOG]!><time="07:29:28.504-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'x64/MicrosoftPolicyPlatformSetup.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.560-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'i386/WindowsFirewallConfigurationProvider.msi' is not applicable.]LOG]!><time="07:29:28.561-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'x64/WindowsFirewallConfigurationProvider.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.615-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'i386/Silverlight.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.670-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'i386/wic_x86_enu.exe' is not applicable.]LOG]!><time="07:29:28.670-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'x64/wic_x64_enu.exe' is not applicable.]LOG]!><time="07:29:28.670-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'i386/dotNetFx40_Client_x86_x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.723-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'SCEPInstall.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.779-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Item 'i386/client.msi' is not applicable.]LOG]!><time="07:29:28.779-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
    <![LOG[Item 'x64/client.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.841-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
    <![LOG[Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmutillib.cpp:1363">
    <![LOG[Default CSP Type is 24]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmutillib.cpp:1364">
    <![LOG[Discovering whether item 'i386/vcredist_x86.exe' exists.]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[Detected item 'i386/vcredist_x86.exe']LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'x64/vcredist_x64.exe' exists.]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[Detected item 'x64/vcredist_x64.exe']LOG]!><time="07:29:28.843-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'x64/vc50727_x64.exe' exists.]LOG]!><time="07:29:28.843-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[Upgrade code '{A8D19029-8E5C-4E22-8011-48070F9E796E}': product = '{ad8a2fa1-06e7-4b0d-927d-6e54b3d31028}', installed = 1, version = 8.0.61000]LOG]!><time="07:29:28.843-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="msiutil.cpp:1273">
    <![LOG[Checking '{A8D19029-8E5C-4E22-8011-48070F9E796E}' version '8.0.61000' expecting >= '8.0.61000'.]LOG]!><time="07:29:28.844-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:873">
    <![LOG[Detected item 'x64/vc50727_x64.exe']LOG]!><time="07:29:28.844-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'x64/WindowsUpdateAgent30-x64.exe' exists.]LOG]!><time="07:29:28.844-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[Checking file 'C:\Windows\system32\wuapi.dll' version '7.6.7600.0256' expecting >= '7.4.7600.226'.]LOG]!><time="07:29:28.846-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1278">
    <![LOG[Detected item 'x64/WindowsUpdateAgent30-x64.exe']LOG]!><time="07:29:28.846-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'x64/msxml6_x64.msi' exists.]LOG]!><time="07:29:28.846-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[Checking file 'C:\Windows\system32\msxml6.dll' version '6.30.7601.17857' expecting >= '6.10.1129.0'.]LOG]!><time="07:29:28.847-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1278">
    <![LOG[Detected item 'x64/msxml6_x64.msi']LOG]!><time="07:29:28.847-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'dism.exe' exists.]LOG]!><time="07:29:28.847-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[File 'C:\Windows\system32\msrdc.dll' exists. Discovery passed]LOG]!><time="07:29:28.848-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1250">
    <![LOG[Detected item 'dism.exe']LOG]!><time="07:29:28.848-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'x64/MicrosoftPolicyPlatformSetup.msi' exists.]LOG]!><time="07:29:28.848-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[Upgrade code '{19B9818B-7432-49E9-BC02-B126025EE235}': product = '{90D295B8-BA08-487E-B904-0E624209A410}', installed = 1, version = 1.2.3602.0]LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="msiutil.cpp:1273">
    <![LOG[Checking '{19B9818B-7432-49E9-BC02-B126025EE235}' version '1.2.3602.0' expecting >= '1.2.3602.0'.]LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:873">
    <![LOG[Detected item 'x64/MicrosoftPolicyPlatformSetup.msi']LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'x64/WindowsFirewallConfigurationProvider.msi' exists.]LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[Validated file 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' hash '3BF0651FD4A01170925CEF694468D4EF6F64D76FD3413DEBD14CB8DE019AA10E']LOG]!><time="07:29:28.868-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="util.cpp:2609">
    <![LOG[File 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' exists. Discovery passed]LOG]!><time="07:29:28.868-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1250">
    <![LOG[Detected item 'x64/WindowsFirewallConfigurationProvider.msi']LOG]!><time="07:29:28.868-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'i386/Silverlight.exe' exists.]LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[32-bit Hive selected]LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:948">
    <![LOG[Detected item 'i386/Silverlight.exe']LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'i386/dotNetFx40_Client_x86_x64.exe' exists.]LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[Detected item 'i386/dotNetFx40_Client_x86_x64.exe']LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'SCEPInstall.exe' exists.]LOG]!><time="07:29:28.870-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[Validated file 'C:\Windows\ccmsetup\SCEPInstall.exe' hash 'FDDB17A148D8358B5BFBF63BBB3CDE902DCE807366081FE16B8E6042DCB47C71']LOG]!><time="07:29:29.649-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="util.cpp:2609">
    <![LOG[Checking file 'C:\Windows\ccmsetup\SCEPInstall.exe' version '4.3.0220.0000' expecting >= '4.3.220.0'.]LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1278">
    <![LOG[Detected item 'SCEPInstall.exe']LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
    <![LOG[Discovering whether item 'x64/client.msi' exists.]LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
    <![LOG[Item x64/client.msi has not been installed yet. Put to pending install list.]LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:609">
    <![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
    <![LOG[No client patches are detected.]LOG]!><time="07:29:29.658-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:1736">
    <![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:29.658-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
    <![LOG[No client language packs are detected.]LOG]!><time="07:29:29.664-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:1777">
    <![LOG[Searching for available transform]LOG]!><time="07:29:29.665-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1807">
    <![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:29.665-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
    <![LOG[No transform available for this locale. Installation will proceed with no transformation.]LOG]!><time="07:29:29.671-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1892">
    <![LOG[File 'C:\Windows\ccmsetup\client.msi' doesn't exist.]LOG]!><time="07:29:29.672-120" date="04-17-2014" component="ccmsetup" context="" type="2" thread="2724" file="util.cpp:2595">
    <![LOG[Using branch cache option.]LOG]!><time="07:29:29.690-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6443">
    <![LOG[Adding file 'http://SCCMSRV-02.snba.be:80/SMS_DP_SMSPKG$/ZAV00114/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'.]LOG]!><time="07:29:29.690-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6474">
    <![LOG[Starting BITS download for client deployment files.]LOG]!><time="07:29:29.698-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6487">
    <![LOG[Download Update: 32616448 out of 32616448 bytes transferred.]LOG]!><time="07:29:30.700-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6578">
    <![LOG[Successfully completed BITS download for client deployment files.]LOG]!><time="07:29:32.701-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6536">
    <![LOG[Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package]LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:678">
    <![LOG[Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000']LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:703">
    <![LOG[Site version '5.00.7958.1000' is compatible. Client deployment will continue.]LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:726">
    <![LOG[Successfully downloaded client files via BITS.]LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1396">
    <![LOG[Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878']LOG]!><time="07:29:35.032-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="util.cpp:2609">
    <![LOG[An MP exists on this machine.]LOG]!><time="07:29:35.048-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="msiutil.cpp:565">
    <![LOG[The client version 5.00.7958.1000 does not match the MP version 5.00.7804.1000. The client will not be installed.]LOG]!><time="07:29:35.048-120" date="04-17-2014" component="ccmsetup" context="" type="3" thread="2724" file="msiutil.cpp:583">
    <![LOG[Sending Fallback Status Point message to 'SCCMSRV-02', STATEID='318'.]LOG]!><time="07:29:35.049-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:9756">
    <![LOG[Failed to get client version for sending messages to FSP. Error 0x80041010]LOG]!><time="07:29:35.054-120" date="04-17-2014" component="ccmsetup" context="" type="2" thread="2724" file="ccmsetup.cpp:9838">
    <![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="07:29:35.054-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:9887">
    <![LOG[State message with TopicType 800 and TopicId {5FF017B3-AF3F-4D38-B037-0A7EE1F479C5} has been sent to the FSP]LOG]!><time="07:29:35.075-120" date="04-17-2014" component="FSPStateMessage" context="" type="1" thread="2724" file="fsputillib.cpp:752">
    <![LOG[InstallFromManifest failed 0x80004005]LOG]!><time="07:29:35.084-120" date="04-17-2014" component="ccmsetup" context="" type="3" thread="2724" file="ccmsetup.cpp:7202">
    <![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="07:29:35.086-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:10879">
    I hope someone can help me with this.
    Kind regards

    I agree with Idan. You can easily remove the Management Point Site System role and add it again with no adverse effect. This should solve your problem.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Server failed to start: The domain path does not match the running server

    Hi,
    I've configured Eclipse to run my local weblogic - which actually is working fine.
    The server starts as intended and reaches state RUNNING.
    As soon as this happens, OEPE tries to validate the server and compares the identified server's configuration to the expected configuration.
    This finally results into the error message shown in the subject -- though server is still running.
    !MESSAGE Server watcher[Oracle WebLogic Server 11gR1 PatchSet 1 at localhost]:The domain path does not match the running server.
    Domain RootDirectory retrieved from the MBean of running server is: N:\Oracle\MIDDLE~1\USER_P~1\domains\MYWEBL~1\
    Domain RootDirectory of this server: N:\Oracle\Middleware\user_projects\domains\myWeblogicServer
    Obviously this seems to be an issue with the length of the directory and file names. The domain's configuration and all its start scripts do not have any 8+3 pathes, like USER_P~1 for user_projects. Nevertheless the MBean of the server returns such a "truncated" path which in turn is invalid for OEPE.
    Fix: When setting up the domain in Eclipse, try using that 8+3 representation of the domain's location. Then the comparison will succeed...
    My Question: Where do we need to ask for a fix in OEPE? The 8+3 path is still a valid one ...
    Best Regards
    Philipp

    I haven't been able to reproduce this and 8+3 representation of the domain's location shouldn't be required.
    Can you provide more information:
    - is this a network drive?
    - what is your OS: XP, Vista, Win7?
    - what is the Windows file system type, is it FAT or NTFS
    - Can you try install WLS on C:, e.g. C:\Oracle\Middleware\user_projects and see if it still happens?

  • Receipt Qty in AP invoice does not match with actual receipt qty.

    Hello everyone,
    I am facing an issue in oracle Payables module. When we match invoice with receipt while preparing invoices, Quantity received shown in the Receipt quantity block in invoice window does not match with actual receipt quantity of that item. Due to this difference user is not able to book the invoice. Please help me to resolve this issue.
    Thanks,
    Himanshu Gupta

    Exactly. What i mean is in the invoice window, There is a block called reciept quantity shown in the lower part. The received quantity displayed in that block is more the actual quantity being recieved. (when we see the recieving transactions). is this a bug?
    thanks for your reply, awaiting your response......
    Himanshu Gupta

  • Can not view cellular data account any more (email address does not match)

    On iPad, was originally able to go into Settings > Cellular Data > View Account and view the account info. Now cannot. If try using correct email address and password, get message that account or password are incorrect. If try entering just the email address and clicking "forgot password", get "the email address you entered does not match the email address on file for this device".
    But the 3G cellular is still working.
    Don't know if related, but this problem began after the reports of the 100,000 iPads/users hack. Leads me to wonder if I got hacked.... or more likely if the system/database that "View Account" normally accesses is offline or being reworked by AT&T.
    Any suggestions? Best AT&T contact via Internet? By phone #? By local AT&T store? Via Apple? Use iTunes to reset to factory defaults and start over (risk loss of unlimited plan?)?.
    Thanks.

    Thanks for the replies, I just had the same problem yesterday and it was a misspelled e-mail address, BUT, it did take me three calls to AT&T and more than two and a half hours. The first person didn't even know what I was talking about and gave me a number for iPad support which turned out to be Apple's, so... no help. The second person told me they were there only to solve iPhone problems until I read her your posts, then she tried and tried until the call was cut off (this is AT&T after all). But the third person finally understood, even though it took her almost an hour to get to their iPad support department (she told me it was busy all the time) not before trying with their "technical department" also. I just can't believe that Apple sells millions of these things and AT&T can't supply a direct phone number for this department, or doesn't even train their personnel.

Maybe you are looking for

  • Looping part of a QT movie in keynote

    Hi, I want to be able to have a movie in keynote that plays the whole movie and once it reaches the end it jumps back to a certin point in the movie (not the begining) and plays that part over and over till i change the slide, so the effect is, for e

  • Thin white and black lines on video output

    I loaded a packaged project to make some changes.  (The project was packaged with a different computer than my current. Everything looks clean within Premier.  I'm outputting standard Vimeo settings.  One of the GoPro clips exports with come-like whi

  • When subquery returns multiple rows

    I have a doubt in this case. I follow Oracle SQL by example book and I find that "<=" is used in this query. He says that when the subquery returns single row,,only then <=, >=, = should be used.. Why did they not use ANY,ALL or SOME operators.....Wh

  • Conversion - Doc with multiple line items - LSMW

    Hi Friends,    I have got a flat file that holds all the open sales orders from a legacy system. I need to upload these data into R/3. If i use LSMW it creates a separate sales order for each line item of a single sales order. That is i am unable to

  • Errors Starting BI Presentation Service in OBIEE Developer VM

    Hi, I've recently installed the OBIEE Developer VM. When I get to the 3rd startup script (3-startBI.sh), there is a long delay, followed by the following error: [oracle@demo StartupScripts]$ ./3-startBI.sh opmnctl startall: starting opmn and all mana