WAD: Inhibit Export Text Web Item

There is a Text-Web-Item in our Template which is not bound in the export command.
That´s why this Text-Web-Item was never exported in the past.
Now we´ve made a upgrade from SAP BW 7.0 to SAP BW 7.31.
And now the same Text-Web-Item will be exported (even though it is still not bounded in the export command).
We´ve found out that this problem (under SAP BW 7.31) only exists if a Text-Web-Item is inside a container.
Text-Web-Items that are outside of a container still won´t be exported.
Any ideas how to prevent this Item from export?

That would be technically possible, but I don´t want to change 400 Templates
Because the problem exists since upgrade to 7.31, I´m looking for a reason and a fix without changing all existing templates.
We´ve found out that the problem only exists if a container with layout-type "dynamic" is used. If I change to "GRID" the Text-Web-Item will not be exported. Is this a bug?

Similar Messages

How to create Text Web item based on characteristics text!

Hi
In a template, I have a hierarchy object Region which is in the left panel, then on the right i have table displaying with dataprovider.
When the user select the hierarchy Region say Australia , then on the right I add the text web item, based on which the user selected, my text on righ side becomes australia, if they select Europe, then it should display europe.
Give me some solutions
Thanks
BI Learner

No one answered...

BEx Web Application Designer (WAD) not loading all web items

Hello,
I have a rather complex web template with about 20 charts, and 40 drop down boxes and it works great.
The issue I have is when I am in development I usually have to open & close the template about 10-15 times untill all of my web items appear in the properties list. For example, a chart item will appear on my template, but it is not editable because it was not "fully loaded" because it is not in the list of possible web items in the Properties drop down box. Has anyone else experienced this / found a solution??
Thanks!
-Gary

bump

How to Export two web items using one export button in WAD (3.X) ?

Hello Friends,
I am trying to export two reports using one export button which are in two columns of the table in a web template created in WAD 3.X. but not able to do it. i also tried to doing the same thing in BI 7 copied that code and pasted in 3.X but that doesn't work.
can anyone help me on that?
Thanks,
Nayan Joshi

hi,
SPS 14 for NW 7.0 is installed. I found out, that the filter pane has should have the property "Affected Data Providers (LINKED_DATA_PROVIDER_REF_LIST)" and the navigation pane not. Look at:
- http://help.sap.com/saphelp_nw70/helpdata/en/16/3ee2416149c717e10000000a155106/content.htm
- http://help.sap.com/saphelp_nw70/helpdata/en/85/08e241aa8e9d39e10000000a155106/content.htm
But in my WDA both items don't have this property. The latest SPS for Front-End-Tools is installed.
Any further ideas?

How to change the size of the web item text in WAD 7.0

Dear All
I am quite new to WAD and I am having a problem with changing the font size of a web text item
I have searched already and someone suggested changing the Design property to HEADER1 or HEADER2 etc and then I should be able to change the font / size.
I have done this but to no avail
I want to have large heading across the top of the web template
am I using the wrong web item ?
I know I can key the text directly into the web template and change the font from the menu bar but I need it in an item as I want to export them through to PDF later
Would be grateful of any help
thanks
Sandra

Thank you all for your quick responses (I will award points once this is sorted)
On the information you have supplied this has opened up yet another new part of WAD that I have not experienced ...TAGs
Shubhranshu - I have done what you said but as I have never used tags I have just had a look around and found that I can insert Any Tag but not sure if I should be doing that. If it is inert any tag , I chose FONT from the drop down and cbmAttributes defaulted into the custom tab for the class name but not sure what it wants in the Attributes and CSS Style tab, it won't accept what I am putting which is leading me to believe that I shouldn't be doing it that way.
Venkat - thanks for the links they will prove very useful. I've had a look and although they talk alot about the XHTML code for tags they don't actually say how you do it in the editor - I would like to produce one that way first and then see the code it generates for it. I'm a bit apprehensive with changing the code direct as I don't want to mess anything up.
Thanks again for your help

How to Customize the Web item " Text Elements"in WAD

Hi All,
Can any one let me know how to customize the web item TEXT ELEMENTS. When we place the web item Text element in the web template, it displays the query details and the info provider details.
I question is I do not want to list all the list that is displayed in the text elements. I want to see only part of the list....can any one whether this is possible or not..if possible how...?
Thanks in Advance,
Hash

yes you need to specify the variable name
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TEXTELEMENTS_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEXT_ELEMENTS"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="GENERATE_CAPTION" value="BORDER"/>
         <param name="GENERATE_LINKS" value=""/>
         <param name="SHOW_COMMON_ELEMENTS" value=""/>
        <b> <param name="ELEMENT_TYPE_1" value="VARIABLE"/>
         <param name="ELEMENT_NAME_1" value="0H_CCTR"/></b>         ITEM:            TEXTELEMENTS_1
</object>
Regards
Raja

WAD - Export to Excel: Information from Web Item "FILTER_PANE_ITEM"

Hi all
In a report header I would like to display all the restrictions (filters) that have been placed on a query. I do this by adding a FILTER_PANE_ITEM in the web application. I works fine in the IE: In the top of the report all restrictions are displayed and below the query result from ANALYSIS_ITEM part.
I have created a Buttom called "Export to Excel". The Command is EXPORT and in the web items for Data Binding I list both the FILTER_PANE_ITEM and the ANALYSIS_ITEM.
When I run the report in the IE and push the "Export to Excel" buttom the data is exported to Excel...but only the ANALYSIS_ITEM part. All information from the FILTER_PANE_ITEM are missing... And I don't understand why!
Can anyone give me a hint to what I am doing wrong?
Regards
Peter

Peter
FILTER_PANEis not an exportable item and hence the web item binding is ignored.
Please see note 1178857 - Additional information: Export to Excel functions
Alternatively, you can use INFO_FIELD Web Item to display the list of static, dynamic filters and variable values used.
Thanks
Sri

Test box web item not exporting to PDF

HI all
I am new to WAD , i have developed a report and published in portal , my client want to pass some comments about the report and export it to PDF through portal.
I have used a Textbox webitem to write comments but it not getting exported to PDF, as of my knowledge all the web items get into PDF, please guide me on this issue.
Regards
VK

Hi VK,
You are from basis so you dont know about WAD...
Please logon into Web application designer and open the template "0ANALYSIS_PATTERN"
0ANLAYSIS_PATTERN -> Find the properties of "BUTTON_TOOLBAR_2" -> you see List of button, select
button (SAPLRRSV -748) click -> command with "Export" button in web binding you add the webitem "text_item1" then only text also export to pdf.
Still you have issue please provide your contact number I will call you and explain in detailed.
Thanks,
Venkat

WAD: Push button not displaying some Web Items

Hi All,
I have a web template 7.x in which there is a push button for "Export to PDF". There are some changes carried out to this web template, to include one radio button web item. My requirement is to display this Web Item on the export to PDF page.
I have included this radio button web item in "Export to PDF" button list. However still it is not displayed on Export to PDF page.
Is there any other setting which i am missing?
Appreciate your quick response.
Thanks.

Hi Samruddhi,
As per SAP Note 1069368 which talks about the limitations of Export to PDF functionality in WAD 7, the following webitems alone are supported on Export to PDF:-
Supported Web items
Analysis item
Report item (see also the section 'Web application export with report items')
Chart item
Map item
Information item
Text item
List of conditions
List of exceptions
Images (only from the MIME repository, see Note 484390)
Thus Radio Button cannot be included in the exported PDF.
--Priya

Can I change the standard text for web item 'INFO_FIELD_ITEM'?

Hello experts.
I made a WAD template using web item 'INFO_FIELD_ITEM'. In data binding, I used the 'Last refresh' of general text elements. As a result, in the web browser I can see the last update date & time. (e.g. 'Last refresh: 2007.01.17 17:34:44') Then our customer want to change the default text "Last refresh" as "Working time".
How can I change this?
I tried to change the text symbols for program SAPLRRSV. But it worked only in Bex Analyzer not in the web.
Our server version is Netweaver 2004s and SP10.
Best regards.
JY Park.

Hello,
I had the same problem - just wanted to display the values of a variable in an info-field, but not the caption.
I found out, that there's a tag for Info-Field Item called ONLY_VALUES (it's the checkbox under the headers visible checkbox in the properties dialog of the Info-Field Item; in my WAD version, there's no label assigned to this checkbox, so it was not easy to find out what it should be),
You have to set it to 'X' (check it) ; then you get the unformatted value of the variable (no caption anymore).
<bi:INFO_FIELD_ITEM name="INFO_FIELD_ITEM_1" designheight="500" designwidth="350" > <bi:WIDTH value="350" />
<bi:HEIGHT value="500" />
<bi:DATA_PROVIDER_REF value="DP_1" />
<bi:HEADERS_VISIBLE value="" />
<bi:ONLY_VALUES value="X" />
You have to insert the info-field item between span tags so that you can define your own formatting values.
The ONLY_VALUES tag works the same as the tag 'RENDER_AS_TEXT' you have with the text item , see
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
There's only one disadvantage: If you have chosen a lot of variable values (multiple selection), the variable string gets very long and no line break is performed, because all blanks in the string are replaced by nbsp's. I solved this with a little Java Script, replacing the appropriate nbsp-s with br tags.
Hope it helps
Beate

How to use "Context Menu" web item in WAD 7.0 ?

Hi Experts,
Kindly tell me How to use "Context Menu" Web item in SAP WAD 7.0 ?
How to attach this Web item to my Graph/Chart ?
Plz provide some documents on this.
Full points will be given.
Thanks.
-Jay Jay
Edited by: jayaprakash j on Oct 10, 2008 1:47 PM

Hi Jay
Web items and HTML elements (for example, tables, texts, and images) that you insert into a Web template, as well as the Web template itself, have a context menu. This context menu has context-sensitive menu entries that you can use to call various Web Application Designer functions. You can, for example, use the context menu to save a Web item (for which you have specified properties by using the parameters) as a reusable Web item, call the properties dialog box for this Web item, copy the Web item and paste it into another Web template, or delete the Web item from the Web template.
for more info go to following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/2f/776b3d32390968e10000000a114084/frameset.htm
Regards
Vivek

WAD : Changing Web Item Property

Hi
I have a requirement to change the Web item Info Field in WAD 7.0 (earlier Text Element in BW 3.5). Presentlt there are two property that is Width in Pixel & Height in Pixel i want to have Width in Pixel , Full Width , Height in Pixel & Full Height as present in Analysis Web Item .
How to achieve this is it possible for us to do this or not?
Thanks & Regards
Rajesh Kumar

Hi gurus,
I have found a way to update my title via Javascript using url command :
I add this line in my url : &item=Table_1&caption=NewTitle
But it works only if I use this line alone ... if I try to do this with another cmd (merge the two cmd together)
&DATA_PROVIDER=DATAPROVIDER_1&CMD=CURRENCY_CONVERSION&CUR_CONV_METHOD=ACAVCTRT&CUR_CONV_TYPE=2&DATA_PROVIDER=DATAPROVIDER_1&TARGET_CURRENCY=EUR<b>&item=Table_1&caption=NewTitle</b>
it doesn't work (only the first cmd is executed) ! Anybody knows something about that ???
Thanks in advance
Aleksi

WAD binding using "Web Item with ManualInput"

I am using a formula variable in a fox to get an user entered number. I have Input Field web item in the web template and I am trying to pass the input value from this item to the formula variable using "Web Item with ManualInput" binding type . But, the user entered value is not getting transferred to the fox.
While other variable types work fine, seems to be having issues with this binding type for formula variable. Any help in resolving this issue is much appreciated.
Thanks.

Hi all,
please try following procedure to pass the entered value from WAD to FOX:
Within the command "exec_planning_sequence" (or planning function) do the following data binding:
variable: {technical name of your formula variable}
variable type: "item-input"
web-item: {technical name of your input item}
Should look like this in XHTML (assume the formula variable is called Z_IM_TEST_MMEVE_001):
<bi:command type="EXEC_PLANNING_SEQUENCE_SIMPLE">
<bi:param name="VARIABLE_VALUES" type="ORDEREDLIST">
<bi:param name="VARIABLE_VALUE" type="COMPOSITE" index="1">
   <bi:param name="VARIABLE" value="Z_IM_TEST_MMEVE_001" text="Z_IM_TEST_MMEVE_001">
</bi:param>
   <bi:param name="VARIABLE_TYPE" type="CHOICE" value="ITEM_INPUT">
    <bi:param name="ITEM_INPUT" type="COMPOSITE">
    <bi:param name="ITEM_REF" value="INPUT_FIELD_TEST">
   </bi:param>
</bi:param>
</bi:param>
</bi:param>
I implemented the same thing successfully and received the entered values in FOX correctly. If it does not work just post a description of the problem appearing.
Brgds,
Marcel

Web Item Portfolio in WAD 7.0

Hi,
I would like to realize the following with the portfolio Web Item in the WAD 7.0:
I got a Query which delivers me 3 columns:
Section1 : x,y, size
Section2 : x,y, size
x for x axis y for y axis and size for the size of the bubbles in the chart.
The Chart presents this correct.
As a label for every bubble it shows me Section1, Section 2....
As Label I would like to have the value of the third column(size) presented and not
Section 1, Section 2...
Is there a possibility to this?
Thanks for any help!!

Hi Holger,
this is possible with the latest IGS version when using $size in the Format attribute of the Series customzing.
See note <a href="http://service.sap.com/sap/support/notes/1064448">1064448</a> for more information on the number formats.
Best regards
Matthias

How to design selection screen with WAD 3.x Web Items

Hi Guruu2019s,
I have a requirement where I need to design a selection screen by using WAD 3.x web items. In the selection screen we have to include the Query Description - in the left corner of the selection screen, Name of Sales Person u2013 left side of the screen, Date from and Date to u2013 right side of the selection screen, User ID and User Name u2013 on the top right of the selection screen etc., after this on the bottom of the selection screen I have to include the pushbutton RUN REPORT.
After filling all the above parameters and click on Run Report it has to trigger another URL link which contains consolidated Sales CRM Report.
Could any one suggest me and provide me the idea on developing the selection screen with WAD 3.x Web items and is there any other interface to trigger the other URL link when I click on Run Report.
Regards
Venkat

no replies. Closing the incident

WAD: Inhibit Export Text Web Item

Similar Messages

Maybe you are looking for