Wage Type  is not valid for allowance grouping

Gurus
    When i am Executing PC00_M40_TERM and entered Details then in very next screen it is with error
   ''Wage Type  is not valid for allowance grouping ''
The Issue is showing generic and No specific Wage type shown in error.
ABAP Team also Debuged and could not get the Issue.
Kindly Let me know from your Experience what could be the Issue.

Your wage type is missing in allowance grouping configuration against RAP indicator R,Reimbursement
Check table V_T7INA9 , check  the wage type is configured for the allowance grouping of that employee with RAP Indicator R, Reimbursement

Similar Messages

  • Data Type Is Not Vailid for Input

    Hello,
    I'm new in (ABAP) WebDynpro and I have a problem with displaying data - particularly with HROBJECTs from our e-Recruiting system.
    In my WebDynpro-Component i read some data of candidates into my context. One table (with candidate-infos) which i save in my context includes a field which is datatype of HROBJECT. After I've read this infos into my itab, I bind this table to my context. All this works fine! But as soon as I bind this context to a table-ui-element in my layout, i get a error message "Data Type Is Not Valid for Input", when i start the application.
    If I delete the binding with the attribute which is a HROBJECT, it works.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_WDR_CONVERSION_EXCEPTION
    Information on where terminated
        Termination occurred in the ABAP program "CL_WDR_CONVERSION_UTILS=======CP" -
         in "IF_WD_CONVERSION_UTILS~TO_STRING".
        The main program was "SAPMHTTP ".
        In the source code you have the termination point in line 138
        of the (Include) program "CL_WDR_CONVERSION_UTILS=======CM00G".
        The termination is caused because exception "CX_WDR_CONVERSION_EXCEPTION"
         occurred in
        procedure "IF_WD_CONVERSION_UTILS~TO_STRING" "(METHOD)", but it was neither
         handled locally nor declared
        in the RAISING clause of its signature.
        The procedure is in program "CL_WDR_CONVERSION_UTILS=======CP "; its source
         code begins in line
        1 of the (Include program "CL_WDR_CONVERSION_UTILS=======CM00G ".
    136     WHEN cl_abap_typedescr=>typekind_struct1    "'u'     " structure
    137     OR   cl_abap_typedescr=>typekind_struct2.   "'v'.    " structure
    >>>>       RAISE EXCEPTION TYPE cx_wdr_conversion_exception exporting textid = cx_wdr_conversion_
    139 *      raise exception type cx_wdr_conv_unsupported exporting type_name = l_type.
    Please Help.
    Thanks

    now i've tried it with a independent candidate node (without) supply funciton. =>
    The same error: "Data Type Is Not Vailid for Input"
    Here's the code of my supply-function:
    (probably not the best coding - but it works until i want to display a hro.)
    METHOD get_cand_info .
      DATA: lr_cdcy                    TYPE REF TO cl_hrrcf_candidacy_bl,
            lr_cand                    TYPE REF TO cl_hrrcf_candidate_bupa_bl,
            stru_requisitions          TYPE if_componentcontroller=>element_requisitions ,
            lt_h_cdcy_list             TYPE rcf_t_list_candidacies_x,
            ls_h_cdcy_list             TYPE rcf_s_list_candidacies_x,
            lt_cdcy_list               TYPE if_componentcontroller=>elements_candidate,
            ls_cdcy_list               TYPE if_componentcontroller=>element_candidate,
            lt_addr                    TYPE rcf_t_addressdata_bp,
            ls_addr                    TYPE rcf_s_addressdata_bp,
            lt_email                   TYPE rcf_t_emaildata_bp,
            ls_email                   TYPE rcf_s_emaildata_bp.
    * get all declared attributes
      parent_element->get_static_attributes(
        IMPORTING
          static_attributes = stru_requisitions ).
      CALL METHOD cl_hrrcf_candidacy_bl=>get_instance
        RECEIVING
          return = lr_cdcy.
      CALL METHOD cl_hrrcf_candidate_bupa_bl=>get_instance
        RECEIVING
          return = lr_cand.
    * Hole Kandidatur-Informationen der Kandidaten
      TRY.
          lr_cdcy->get_candidacy_list_x(
            EXPORTING
              ps_req_hrobject  = stru_requisitions-hrobject
    *    ps_cand_hrobject =
    *    ps_appl_hrobject =
    *    p_exclude_draft  = 'x'
            IMPORTING
              pt_candidacies_x = lt_h_cdcy_list
        CATCH cx_hrrcf .
      ENDTRY.
    * Ergänzen der Informationen mit BusinessPartner-Infos
      LOOP AT lt_h_cdcy_list INTO ls_h_cdcy_list.
        TRY.
            lr_cand->get_contact_data(
              EXPORTING
                ps_cand_hrobject = ls_h_cdcy_list-cand_hrobject
              IMPORTING
                pt_addressdata   = lt_addr
    *    pt_telefondata   =
    *    pt_faxdata       =
                pt_emaildata     = lt_email
          CATCH cx_hrrcf .
        ENDTRY.
        READ TABLE lt_addr INDEX 1 INTO ls_addr.
        READ TABLE lt_email INDEX 1 INTO ls_email.
        MOVE-CORRESPONDING ls_h_cdcy_list TO ls_cdcy_list.
        ls_cdcy_list-postcode1 = ls_addr-postl_cod1.
        ls_cdcy_list-city1 = ls_addr-city.
        ls_cdcy_list-email = ls_email-e_mail.
        APPEND ls_cdcy_list TO lt_cdcy_list.
      ENDLOOP.
      CALL METHOD node->bind_table
        EXPORTING
          new_items = lt_cdcy_list.
    ENDMETHOD.

  • Error : Wage Type is not allowed for personnel SG grouping for WT 3

    Hi All,
    When i am trying to create wage type Degree allowance i am getting error like below.
    WT xxxx is not allowed for personnel SG grouping for WT 3 (from 01.09.2006 to
    31.12.9999)
         Message no. PG 074
    Diagnosis
         In the "Personnel Subgroup Grouping for Primary Wage Types" view
         (V_001P_K), the employee is assigned to personnel SG for primary wage
         types 3. However, this grouping is not valid for wage type xxxx in the
         period from 01.09.2006 to 31.12.9999.
    Please let me know where i needs to check.
    Thanks.

    try to change the start date and try like 01.01.1990 like this
    juss chk and update

  • IFS-12635: SimpleXmlParser: Value(10/10/99) not valid for type (Date)

    I am trying to uplaod an xml document sample which has an attribute of date datatype.
    My sample is :
    <?xml version="1.0" standalone="yes"?>
    <document>
    <name> test</name>
    <createdate>1999/03/12</createdate>
    </document>
    I am getting this error:
    IFS-12635: SimpleXmlParser: Value(10/10/99) not valid for type (Date).
    If I input just the "name attribute" value, there is no problem. What is the date format, I should use?
    Please suggest.
    Thank you
    null

    Is there any way to specify the format in the custom type document itself. ? I do not want to specify the format in every document sample. Is there any way that it is possible. If I give the format in the document samples, as Matt said, there is no problem.
    Now I tried to give the format in the type document itself.
    I created a custom type document as follows:
    <?xml version="1.0" standalone="yes"?>
    <!--myTestType.xml-->
    <ClassObject>
    <Name>myTestType</Name>
    <Description> myTestType Document </Description>
    <Superclass Reftype ="name">Document</Superclass>
    <Attributes>
    <Attribute>
    <Name> Category </Name>
    <DataType> String </DataType>
    <DataLength> 80 </DataLength>
    </Attribute>
    <Attribute>
    <Name> posted_date </Name>
    <DataType format="mm-dd-yyyy"> date </DataType>
    </Attribute>
    </Attributes>
    </ClassObject>
    I could able to upload this to ifs. No problem at this time. But when I try to load the below sample, I am getting the same parse problem.(IFS-12635 SimpleXmlParser: Value(12-25-1992) not valid for type (Date.).
    sample xml document
    <?xml version="1.0" standalone="yes"?>
    <myTestType>
    <name> testing.myTestType</name>
    <Category>Administration_4</Category>
    <posted_date >12-25-1992</posted_date>
    </myTestType>
    Thank you.

  • HT1918 Trying to edit my payment info.  I keep getting the message that my number is not valid for the type of card I have selected.  I have a VISA card.  I have typed in the number 4 times, but same message pops up.

    Trying to edit my payment info.  I keep getting the message that my number is not valid for the type of card I have selected.  I have a VISA card.  I have typed in the number 4 times, but same message pops up.
    Thoughts?

    You are probably entering your Visa's security code incorrectly.  Here's how to find it:
    http://support.apple.com/kb/HT3541

  • The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg

    Hi,
    I am getting bellow error when i am running my application. I am using JDeveloper 11.1.2.3
    <Nov 6, 2013 9:52:57 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Nov 6, 2013 9:52:57 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <BC4JConfigLifeCycleCallBack> <contextInitialized> MDS-01702: The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg - it is allowed on only bean metadata objects.
    oracle.mds.exception.MDSRuntimeException: MDS-01702: The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg - it is allowed on only bean metadata objects.
      at oracle.mds.core.MetadataObject.getBean(MetadataObject.java:327)
      at oracle.adf.share.jndi.MDSBackingStore.getMOBean(MDSBackingStore.java:558)
      at oracle.bc4j.mbean.RuntimeMXBeanImpl.init(RuntimeMXBeanImpl.java:120)
      at oracle.bc4j.mbean.RuntimeMXBeanImpl.<init>(RuntimeMXBeanImpl.java:110)
      at oracle.bc4j.mbean.RuntimeMXBeanImpl.<init>(RuntimeMXBeanImpl.java:101)
      at oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack.contextInitialized(BC4JConfigLifeCycleCallBack.java:114)
      at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    <Nov 6, 2013 9:53:11 AM AST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reop
    I seen oracle docs solution
    MDS-01702: The method getBean() is not valid for metadata object {0} - it is allowed on only bean metadata objects.
    Cause: An attempt was made to access the metadata object using the bean API but the metadata object was not a bean metadata object. The schema for the root element may not have been registered with MDS, or the beans were not available on the classpath.
    Action: Regenerate the beans from the schema definitions and ensure that the correct versions are on the classpath. Check that the schemas are registered with the MDS instance.
    Level: 1
    Type: ERROR
    Impact: Configuration
    But i am not getting what i do in my application for removing this error.
    Maroof

    Do you use MDS in your application?
    It's possible that you see a leftover of an earlier deployment.
    Do you get the same error if you only start the integrated server (application server navigator->integrated server->debug or run)?
    IF you don't get it when you only start the server without running your application, the problem is somewhere in your app. If you get the error it's probably an old deployment or a configuration error of your server. In this case stop jdev, rename the DefaultDomain folder C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain tp C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\xxxDefaultDomain and start jdev again. Then use hte application server navigator to create a new integrated server (you should see this option as the DefaultDomain folder is not present) and once the new integrated server is created test again.
    Timo

  • Fatal Error During Solution Center Install - "Key Not Valid for Specified State"

    I have encountered an error while trying to install HP Solution Center for my J6480 All-In-One.  The software I'm installing is "OJJ6400_Full_10.exe"
    I can get past the installation option selections (i.e., the screens that allow selection of which components you want installed) as well the online check for updates to the software.  However, shortly after that I get a fatal error the full text of which are:
    Error Situation Code: 23551631
    The following lines were retrieved from the installation error logs.
    Now Launching=X:\hpzmsi01.exe -m dot4wrp "-*"
    ".\autorun_network.inf" "-networkonly" -| XXX -f X:\DIVins??.DAT
    Error message received: Key not valid for use in specified state.
    X:\cioum32.msi failed with return code 1603
    MSIInstall() failed with 1603
    Exit code=1603
    Your help is appreciated.  Thanks.

    Hey @redleader74,
    At this time I am going to have you unlock the hidden System Administrator Account and attempt an install under there. Ideally, if everything installs fine you should be able to log back into your normal User Account and the complete software and driver package for your HP Officejet J6480 All-in-One Printer will be installed and functional. Can I please have you follow the steps below.
    Step 1: Uninstall Drivers:
    Click on your Start menu
    Select All Programs
    Select the HP folder
    Select your HP Officejet
    Select Uninstall
    Please follow any onscreen prompts to complete the uninstall. Once the uninstall is complete please proceed to the next step.
    Step 2: Clear Temp Files:
    Click on your Start menu
    In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
    When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
    Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
    Close the Temp folder once it is emptied
    Right click the Recycling Bin on your desktop and select Empty Recycling Bin
    Step 3: Unlock System Administrator Account:
    Click on your Start menu and under the 'search programs and files' box type CMD
    CMD will populate as a search option above, just right click on it and 'run as administrator'
    Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
    Next, close CMD and restart your computer
    When your computer comes on log into the new Account that should show. It will be called Administrator and will not have a password on it.
    If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator Account we just unlocked
    Step 4: Install Device:
    Under the Administrator Account please click here to download the latest drivers for your printer.
    Once the website opens select the Download button on the top left
    Once the download is complete please follow the onscreen instructions to install your printer
    Once the installation is complete, please test the functions of your HP Officejet to ensure that everything is functioning properly now. If everything installs fine, log out of the Administrator Account and back into your normal User Account. All the Software and Drivers for your product should show installed now on your Account. Once you're logged into your User Account please test your HP Officejet again to verify that your print and scan functions are still working.
    If everything works fine, you will want to Hide the Administrator Account.
    Go to your Start menu and under the 'search programs and files' box type CMD
    CMD will populate as a search option above, just right click on it and 'run as administrator'
    Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
    Next, close CMD and restart your computer
    Please let me know if these steps resolve your issue. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Create Wage Type in Infotype 0008 for Myanmar

    Dear Experts,
    I am trying to create wage types in Infotype 0008 for Myanmar, which is not one of the countries where SAP payroll is being delivered.  I am not trying to run payroll, but only to create the wage type so that I can maintain the salary information in Infotype 0008.  I have done much searches prior to doing this post and found that there are several other posts which are similar to mine.  However, as I could not get the answer that I needed, I am posting again here.
    I have gathered that for ECC 6.0, it is not possible to copy wage types between country groupings.  The advice that I had seen from other posts are:
    1. There are many countries where the wage types are not delivered.
    2. For country groupings where there are no SAP-defined wage type models, you have to create wage types from scratch in T512W using MOLGA 99 wage types as reference.
    3. The wage type groups should then be created for the country grouping in T52D5.
    4. Wage types are then assigned to these wage type groups in V_T52D7 of T52D7.
    5. You may also need to update the wage types in tables T511B, T512Z, T512J.
    My questions are:
    a. How should I perform Step 2 as mentioned above?  Specifically, how to I maintain table T512W?
    What I had done was to go to t-code OH11, select "Copy", select country grouping as "99" and selected wage type M020. Then I typed the customer wage type number as 1000 and also entered the wage type long text (as shown below).  M020 was successfully copied to wage type 1000 in country grouping 99.  However, how should I continue from here to copy this wage type 1000 to country grouping Myanmar?
    b. How can I maintain T52D5 as mentioned in Step 3?
    c. I have not been able to try for Steps 4 and 5 since I was not able to start with Steps 2 & 3. I will ask again when I have managed to do Steps 2 & 3.
    Very much appreciate all advice and suggestions to the above.....

    you can try through fast entry screen  and update the amount in infotype.

  • Whenever I updated or downloaded a new app from the App Store, a message appears saying:   "Account Not In This Store Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."   I made some research onl

    Whenever I updated or downloaded a new app from the App Store, a message appears saying:
    "Account Not In This Store
    Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."
    I made some research online and asked a few of my friends with the same problem. All they did was sign out of iTunes from settings>iTunes & App Stores or from the App Store itself and signed back in. It worked for many of them but not with my iPhone 4s. It really does get on my nerves to always sign out and back in to the App Store as it sometimes works and allows me to update and download or most of the time it doesnt.
    When viewing my Apple ID account on my iPhone (after entering the password) it either views my account or says:
    "This Apple ID is only valid for purchases in the U.S. iTunes Store. You will be switched to that Store. Try your purchase again."
    So I press on OK then either switches me to the App Store app of its choice, or says "Cannot connect to iTunes Store".
    I tried restoring iOS6 hoping it was a bad installation, but i still have the same problem.
    Can anyone help me please?
    Arian

    Are you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
    If you keep encountering problems contact iTunes support. They will help you sort it out.

  • Product is not valid for Sales org and distribution chain

    Hello friends,
    When i am saving the trade promotions , i am getting error message
    "Product XXXX is not valid for distribution chain XXXX, XXXX"
    I have maintained sales organization and distribution channel in commpr01 under sales and distribution tab.
    kindly help.
    Regards,
    Srinivas

    Hi Srinivas,
    the error is raised from the trade promotion CCA check - raised from method CL_CRM_MKTGS_PD_CCA_CHECK_HDLR~CHECK. There are the following checks performed:
    * There are several checks to do based on the distribtion chain
    * Execute the checks and identify which products fail which check
    1. *   Determine if the product passes the distribution chain check
    2. *   Determine if the product category 1 of the product assignment
       *   passes the product category check
    3. *   Determine if the product category 2 of the product assignment
       *   passes the product category check
    4. *   Determine if the product group of the product assignment
       *   passes the product group check
    5. *   Determine if the sales status of the product is set to blocked
    You may also need to check the sales and distribution data of the product category or product group of the mentioned product, if this is assigned to any.
    best regards,
    Johannes

  • 'This Serial number is not Valid for Photoshop CS6 Extended'

    'This Serial number is not Valid for Photoshop CS6 Extended'
    i did download the regular cs6 - but still keep getting this message
    what to do?
    Thanks!

    TravisWT wrote:
    Do i need to install the entire suite on the secound computer to access photoshop?…
    No, installing Photoshop alone would do, that would also install Bridge on your computer.  But you do have to download the whole-suite download to install Photoshop from it.  The individual Photoshop download will never accept your suite serial number.
    Incidentally, the "suite" concept is a fabrication of Adobe marketing and bean-counting types.  The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
    The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one.

  • Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

    Good morning,
    I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
    Installation goes plain until around the end of the progress bar, it stops on the setup of
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    I've put in my SkyDrive the error log I received after the install;
    I'm at full disposal if you need further information,
    thank you in advance
    Best regards
    Francesco

    Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above: 
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
    Then, I just got my account added as Local Admin and then tried to start the service and was able to.
    However, I am not sure whether same was the case for you.
    Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

  • Serial Number Not Valid- new Windows 7pro/ fresh install of Creative Suite 5 Design Premium Win from download will not accept license key. This serial number is not valid for this product is the only response.

    Serial Number Not Valid- new Windows 7pro workstation / fresh install of Creative Suite 5 Design Premium Win from download will not accept license key to install. This serial number is not valid for this product is the only response being returned. What am I missing?

    The key is for Creative Suite 5 Design Premium the download is DesignPremium_CS5_5_LS1 and all associated files in the group.

  • I keep getting the message your account is not valid for use in the US Store. You must switch to the Canadian store before purchasing. I have selected the Canadian store, but I still keep getting the same message.

    I keep getting the message: Your account is not valid for use in the US Store. You must switch to the Canadian Store before purchasing. I have selected the Canadian store, but still keep getting the same message. Any suggestions?

    Hi hi-liter,
    Are you certain that you are signed onto iTunes & Apps in the Canadian store?
    Settings>iTunes & App Stores, click on your AppleID, and then click on View AppleID. Type in your password, then click on Country/Region. Once there, follow the prompts and then select the Canadian Flag.
    Hope that helps!
    Cheers,
    GB

  • After re-installing my serial number is not valid for this product

    My laptop crashed and I had to install PhE11 on another laptop. After installing it says: this serialnumber is not valid for this product.
    But it is the only serialnumber I have, and I did not type it wrong. Please help.

    Walked through the CC Cleaner, the log removed some things and this is the summary of warnings:
    [Tue Dec 30 15:01:43 2014] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Tue Dec 30 15:01:16 2014] DB does not exist at: C:\Program Files\Common Files\Adobe\caps\caps.db
    [Tue Dec 30 15:01:42 2014] Warning: Failed to remove file,folder trying again
    [Tue Dec 30 15:01:42 2014] Warning: Failed again to remove file,folder
    [Tue Dec 30 15:01:42 2014] Warning: Failed to remove file,folder trying again
    [Tue Dec 30 15:01:42 2014] Warning: Failed again to remove file,folder
    [Tue Dec 30 15:01:43 2014] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
    Still cannot use my serialnumber. Should I remove and reinstall the new installed PhE11?

Maybe you are looking for