Wanna write a Procedure for..........

Hi Everyone,
There are two schemas A and B, I want to create a procedure for table creation in schema B using table of schema A and some filter(where clause). In procedure i will pass two argument-
1- Table name(in schema A) by using which we will create a new table in schema B including with some suffix as SYSDATE.
2- Filter( Where clause)
How can i write this procedure ? can anyone suggest me?
Thanks,
Abhijeet

Aman.... wrote:
arpit sinha wrote:
First of all I have just shown him the way how to create a table in side procedure and he can use CTAS to create table by selecting other schema user's table.
Thats it
and without having create any table privileged how you can create table in other schema user.Hmm well, if one is sitting in his schema and creating tables in another schema, that design itself needs tuning. The priv create any table, IMHO is not required , at least in most of the cases.
What is wrong with you i dont know plz dont run behind me...Huh?
Run after you? I really don't think that its true and I don't have any intention whatsoever to do it either. Its just a tech discussion and I raised a doubt where I thought I had one, thanks to my very less knowledge about Oracle db. Probably the thought came to you because of other threads where I had mentioned that the reply was wrong like here,
pfile
And I guess here as well, where I just mentioned that reading one book alone doesn't make any one good in the art of performance tuning(PT).
Re: tuning
Anyways, I shall not "run behind" you anymore, apologies if I sounded rude.
A R P I T S I N H ACheers
Aman....Hi Aman
Plz dont take it otherwise I apologizes for every thing that I have written over there
I am not even saying against your knowledge of Oracle plz dont feel bad about me...
I m less experienced and need to learn how to behave and also about Oracle from you..
forget that stupid reply by me I AM SORRY
A R P I T S I N H A

Similar Messages

Need to write a procedure for Log files (scheduled jobs)

Hi,
We have around 50 scheduled jobs.Jobs will run parallelly. In these jobs, some jobs will repeat at different timings.in these some jobs are daily jobs and some are weekly and some are monthly and some will run first and second working day of the month and some will run on some particular days.
Now I want to write a procedure like, For every job it should create a log file like "
<Job_Name> started on <Date> at <start_Time(timestamp)> and completed on <Date> at <End_Time(Timestamp)> successfully.
<Job_Name> started on <Date> at <start_Time(timestamp)> and completed on <Date> at <End_Time(Timestamp)> abnormally.
If all jobs complted successfully it should send an email to the mailgroup with attached log file (which contains the details of all the jobs) with format as follows.
Jobname Start_date Start_time End_Date End_Time Status
SALES 21-May-2011 12:00:00 21-May-2011 12:01:00 Completed Successfully
21-May-2011 12:15:00 21-May-2011 12:16:00 Completed successfully
Proudcts 21-May-2011 23:00:00 21-May-2011 23:16:00 Completed successfully
ITEMS 21-May-2011 23:00:00 21-May-2011 23:16:00 Completed successfully
If the status ="Completed abnormally" for any particular job
immediately it should send an mail to the group like " FATAL_MESG_JOBANAME_Date_Time(timestamp)"
for example if SALES job was failed at 15:00:00 then immediately it should send a mail.
if ITEMS got failed then it should mail ( in between any job got failed it should send an email).
if every thing is going cool then need send a final success mail to the group.
so Please let me know how to write a program for this requiremnt.
Thanks in advance.

832581 wrote:
Hi,
Thanks for giving valuable link to gain the knowledge on DBMS_SCHEDULER.
But here I didn't get clear idea to write a program which I need to schedule the job for every 1hr.
Please suggest me to write the program..
ThanksYou'll have to read the link i sent. Or google for an example.

How to write a procedure for update the table

Hi all
can any body please tell me how to write a procedure to update the table......
I have a table with about 10,000 records...........Now I have add a new column and I want to add values for that like
registration Code Creidits
13213 BBA
1232 MCS
I had add the creidit now i want to update the table.........the new value want to get by SQL like
Creidit = select creidit from othere_table...........
Hope u can understand my problem
Thanks in advance
Regards
Shayan
[email protected]

Please try the following --
update Program_reg a
set TotalCreidit = ( select tot_cr <Accroding to your logic>
                            from Program_reg b
                            where a.Registration = b.Registration
                            and    a.Enrollment = b.Enrollment
                            and    a.code = b.code
where a.Registration in ( select distinct Registration
                                    from Program_reg );
N.B.: Not Tested....
Regards.
Satyaki De.

Need Assistance to write a procedure for the below requirements!!!

Hi Forum,
Could some body give me a hand in writing an oracle procedure to pull the results as per the below requirement
A JOBNUM is transfered from the first JSP page to second JSP page and based on that JOBNUM I have to write a procedure to populate the second page
I need to pull these feilds from the respective tables
QM_JOB_NUM, QM_JOB_STATUS from QMI which matches the value of the JOBNUM from the first JSPpage
QN_JOB_GPH_FILE, QN_COMMENTS from QNI where QM_JOB_NUM = QN_JOB_NUM
VM_NAME concertnate with VM_SURNAME from VMI where QM_PROFILE = VM_PROFILE
QF_NARRATIVE_1,QF_NARRATIVE_2,QF_NARRATIVE_3( if these feilds has any values in DB then only pull them, if not dont pull them.so, we need to put a IF condition) where QF_JOB_NUM = QM_JOb_NUM
JI_DESC from JII where QM_USER_STATUS = JII_STATUS _CODE
RR_NAME from RRI where QM_REP = RR_REP
and
a case condition to match the QM_JOB_STATUS to the string value ( LIVE, PENDING , CLOSED ) as the QM_JOB_STATUS stores in the database as the numerical values 1,2,3 and while displaying on to the web page I need to match to the correspond string value and display it
if ( QM_JOB_STATUS ) = 1 then print to the webform LIVE
if ( QM_JOB_STATUS ) = 2 then print to the webform PENDING
if ( QM_JOB_STATUS ) = 3 then print to the webform CLOSED
Thanks for your assistance.
Cheers,
Krishna.

First off, you need to turn the requirement into a sql statement. If I followed things correctly, that would be something like:
SELECT qmi.qm_job_num,
       DECODE(qmi.qm_job_status, 1, 'LIVE',
                                 2, 'PENDING',
                                 3, 'CLOSED') qm_job_status,
       qni.qn_job_gph_file,
       qni.qn_comments, vmi.vm_name||' '||vmi.vm_surname name,
       qfi.qf_narrative_1, qfi.qf_narrative_2, qfi.qf_narrative_3,
       jii.ji_desc, rri.rr_name
FROM qmi
   JOIN qni ON qmi.qm_job_num = qni.qn_job_num
   JOIN vmi ON qmi.qm_profile = vmi.vm_profile
   LEFT JOIN qfi ON qmi.qm_job_num = qfi.qf_job_num
   JOIN jii ON qmi.qm_user_status = jii.jii_status_code
   JOIN rri ON qmi.qm_rep = rri.rr_rep
WHERE qmi.qm_job_num = p_jobnumP_jobnum in the query is the parameter you will pass to your stored proc.
Next, you need to decide how many rows will be returned for a particular job number. If there will be more than one row, then you will probably need to return a ref cursor. If there will be only one row, then you could return either a set of variables, one for each column in the resultset, or a record type with a field for each column.
If you are returning a ref cursor or a record type, then you probably want to build the stored proc as a function, if you are returning multiple variables, then you will need to build it as a procedure.
So, to return a ref cursor, the signature of the function would look something like:
CREATE FUNCTION get_page2 (p_jobnum IN qmi.qm_job_num%TYPE)
   RETURN sys_refcursor ASReturning a record type would be similar except that you would RETURN the record type you defined in the database.
To return several variables in a procedure, the signature would look something like:
CREATE PROCEDURE get_page2 (p_jobnum     IN qmi.qm_job_num%TYPE,
                            p_status     OUT VARCHAR2,
                            p_gph_file   OUT VARCHAR2,
                            p_comment    OUT VARCHAR2,
                            p_name       OUT VARCHAR2,
                            p_narrative1 OUT VARCHAR2,
                            p_narrative2 OUT VARCHAR2,
                            p_narrative3 OUT VARCHAR2,
                            p_desc       OUT VARCHAR2,
                            p_rrname     OUT VARCHAR2) ASHTH
John

Is it possible to write plsql procedures for htmldb operations

We have several htmldb applications configured on our system.I would like to know if I could perform following operations on htmldb :-
1) Is there a way to disable/lock some htmldb user.If so, what is the API that needs to be used so, that a procedure can be created and executed at sql prompt rather than using web interface?
2) API to change password of a user.
3) API to attach a schema to a workspace.
4) Is there any concept like readonly users in htmldb who can only view the code but not perform any edit operations?
Thanks,
Lavanya

hi lavanya--
i'm assuming your user questions are in reference to users within the htmldb development environment. if that's the case, please find my answers below:
1) Is there a way to disable/lock some htmldb user.If so, what is the API that needs to be used so, that a procedure can be created and executed at sql prompt rather than using web interface?
you can update an htmldb user's "Developer Privileges" by using the wwv_flow_fnd_user_api. it's technically not a supported api, but it's been pretty solid for years. the spec for the api's pretty well documented and you can get to that .sql file in your local install at $ORA_HTMLDB_HOME/marvel/core/wwv_flow_fnd_user_api.sql specifically, the p_developer_roles parameter of the edit_fnd_user is the key to this answer.
2) API to change password of a user.
also available via wwv_flow_fnd_user_api
3) API to attach a schema to a workspace.
no. i've just logged an enhancement request for this, though.
4) Is there any concept like readonly users in htmldb who can only view the code but not perform any edit operations?
no, but this idea is already under consideration.
regards,
raj

Procedure for Archive the data

Hello Experts,
I need to write a procedure for clean up the data base. Below is my rek.
User should be provided with options of entering the table name and also should be given option to select whether he wants to delete all the data or archive the table.
--> Program should provide the list of tables that are related to the table name that was given by the user. (This is not required if the table is stagging table, as they don't have constraints associated with them)
--> If user wants to archive then the data in the tables and its related table should be archived (exported) into a flat file and then delete the data from each table in a sequence. Else, we need to delete the data without archiving.
Can you Please let me know the procedure for the above rek and also I am not sure about the archiving the data. If you don't know the table name and the columns. so How can you define a cursor record to handle the record.
Can you please send me the complete code for the above rek to [email protected]
I appreciate help in this regard.
Thanks & Regards,
Sree.

Can you please send me the complete code for the
above rek to [email protected]
I appreciate help in this regard.The goal of this forum is not to make your job, but to assist you with guidelines, references, and concepts, on specific issues. If you want someone to code for you, then you should hire a programmer instead.
~ Madrid

How to create procedure for header table and item table

Hi,
Can anyone help me to understand how to write SQLscript procedure for looping item table inside header table?
I fetch records from sales header table ( order number ) and using that order number to loop sales item table,thereafter I need to perform business logic.
Any example similar above requirement would be helpful
thanks
Sourav

Hi Folks,
This is my use case
1) Select fact records from tables (say A,B,C,D ) with suitable Joins and certain Where conditions
SELECT ordid FROM TABLES A,B,C,D on join condition where ....
2) Using above header records , I have to select each and every item level data from different tables ( say X,Y,Z ) and perform calculation to derive new columns to update a new table ( Zreport )
UPDATE TABLE ZREPORT
SET col1 = ( Select qty FROM TABLE X WHERE ordid = A.ordid
UPDATE TABLE ZREPORT
SET col2 = ( Select price FROM TABLE y WHERE ordid = B.ordid.
and so on for other columns..
3) Zreport table will be used for reporting.
I would like to know the best way to achieve this to gain performance.
Appreciate the help!
Thanks
Sourav

Can i get help on procedures for amending passwords

can any one help me write the procedures for creating user as well as amending the paaswords of userS??

can any one help me write the procedures for creating user as well as amending the paaswords of userS??

How to write a procedure to run the call the custom package from backend

Hi All
Oracle 10g
Oracle Apps R12
I am working with oracle order management here we have a customize Package called (Pick Release).Due to some problem we have running this concurrent program by manually giving Route_id as parameter. The route_id is taken from the route Table. By using this query
select distinct route_id from route@DB_LINK_APPS_TO_ROADSHOW
where trunc(route_date) = trunc (sysdate+2).
so daily we have nearly 42 routes and we are running this concurrent program manually nearly times.
so now how to write a procedure for this
Step 1 Getting the route from route table.( By cursor we can get the route_id Accordingly)
Step 2 How to trigger the custom package from back end and execute accordingly to that output of the cursor(route_id)
If the cursor get 40 routes is it then the concurrent program runs 40 times according to that route_id.
can some could provide the steps to do this
Thanks & Regards
Srikkanth.M

This is about 4 or 5 lines of PL/SQL and the name of the custom package is not provided.
If you request someone in this forum to do your work for free -because obviously you didn't even try to write it, which must be considered abusing this forum- you must at least provide sufficient info so someone can do it.
And no, I won't do it for you.
Sybrand Bakker
Senior Oracle DBA

How to write a procedure

hii am new to oracle , can u help me how to write a procedure for the following query
Transfer Funds between Accounts:
Table: AccountMaster (AcctNo (primary key), AcctHolderName, currentBal
Data: 1, 'A', 1000
2, 'B', 3000
3, 'C', 4000
Function: getBalance (AcctNo)
Stored Proc: tranferFunds (FromAcctNo IN, ToAcctNo IN, Amt IN, result OUT)
The proc should use the function getBalance (AcctNo) to find out the current balance for account.
The proc should return a value of 1 if the transfer was successful.
It should return a value of -1 if the funds are not sufficient in the fromAccount to transfer.
Thanx ,
Raj0412

I would start by asking your teacher to clarify the parts of the assignment that are not clear to you.
You may also want to read some books.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/toc.htm
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/toc.htm

Write a procedure to check the count is less than 1300 for every 3 hours

Good Morning all,
I want to write a procedure to check the count is less than 1300 for every 3 hours
Query:*
Select count(*) from sample where trx_date=sysdate;
I want to run this query every 3 hours daily
If the count is less than 1300 every 3 hours, we should sent a reminder mail like 'Data not copy'.
Please help me how to write a procedure.

hi there
first
--define the SMTP_OUT_SERVER parameter in your init.ora initialization file
--ALTER SYSTEM SET smtp_out_server='my.domain.com' SCOPE=SPFILE;
after that create a procedure
CREATE OR REPLACE procedure SCOTT.hrsmail
is
v_count number;
begin
Select count(*) into v_count from emp;
if v_count < 1300
then
UTL_MAIL.send(sender    => '[email protected]',
                  recipients => '[email protected]',
                  cc         => '[email protected]',
                  bcc        => '[email protected]',
                  subject    => 'Testing the UTL_MAIL Package',
                  message    => 'If you get this, UTL_MAIL package
else
null;   --what you want to do here
end if ;
end;
/we should create a job which run after every 3 hrs and send a reminder mail like 'Data not copy'.
BEGIN
SYS.DBMS_JOB.REMOVE(373);
COMMIT;
END;
DECLARE
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
( job       => X
   ,what      => 'begin hrsmail; end;'
   ,next_date => to_date('14/02/2011 18:39:29','dd/mm/yyyy hh24:mi:ss')
   ,interval => 'SYSDATE+3/24 '
   ,no_parse => FALSE
SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
COMMIT;
END;
/hope this will help you
Regards
Hitesh
Edited by: Hitesh Nirkhey on Feb 14, 2011 3:34 PM

How to write procedure for creating a row

Hi
How to write procedure for creating a new row in data table when button clicked.

Hi
I am able to create a row.by writing a method in Application module class.
method for creating a row in fin_years view:
public void createRow() {
Row newRow = (Row)getFinYearsView1().createRow();
newRow.setNewRowState(Row.STATUS_INITIALIZED);
//get instance of the above created view object
ViewObjectImpl vo=getFinYearsView1();
// to insert row at the end of the table
vo.insertRowAtRangeIndex(vo.getRangeSize()-1, (Row)newRow);
System.out.println(getFinYearsView1().getCurrentRowIndex());
but it doest not create row at last in the data table.Instead it insert row in middle..

Stored Procedure for Accounts Receivable

Hi. First off, apologies in advance if I have put this question into the wrong topic. Secondly, I first saw SAP 3 weeks ago when I stared my new job and have had no training so please bear with me if some of what I ask doesn't make much sense.
OK, the issue is this. In SAP B1, there is a built in Report called "Customer Receivables Aging" which allows you to see Customer Receivable Accounts by age (e.g 0-30, 31-60, 61-90, 90+) and so on. The problem with the built in report is that it doesn't show all the fields I want - it only shows the Customer Name, balance, and then the aging balances. I want to be able to see things like the customer's contact details, etc. I know this makes no sense because the whole point of the report is to be able to drill down into the different rows, but this report needs to be issued in printed form, hence the need for the extra fields.
Since I can't seen any way from within SAP to change the fields returned by this report, I thought I'd have a stab at writing my own SQL to select out the same data along with the extra fields I wanted. That's when the problems began...try as I might, I cannot get my figures to tally with the SAP Report.
They are almost correct, but not quite. I am sure that I am missing a selection or some other element of the logic that B1 uses to create the built in report.
If you want, I can post the SQL I'm using....I'm not an SQL guru by any means, but I do know my way around it; the biggest problem I have is that I cannot find any documentation as to the 4 letter tables that SAP uses and their relationships except on the most basic level (e.g ORIN is Open Return Invoice [maybe])
Then I thought maybe it might be possible to edit that report section in B1 using the SDK. That would be a better solution as I would not have to 'reinvent the wheel', I can just SELECT an extra field or three to include in the report.
So my question is
->Does anyone have a stored procedure for SQL Server that can replicate correctly the SAP B1 "Customer Receivable Aging", even just the process SAP uses to gather this data would be good.
OR
is it possible to edit this report in SAP to put in the extra fields I want.
Or, am I totally barking up the wrong tree? Thanks in advance, I know this is a long post.

Hi Stephen,
There should be a print layout attached to the on-screen report. This can be altered to show the additional fields you want without resorting to SDK or SQL development.
When you have the Customer Receivables Ageing report open on screen, choose Tools-Print Layout Designer or click on the Print Layout Designer icon on the toolbar. When prompted, choose the layout you wish to edit and you'll be taken to the layout design. In the layout, you can add additional fields and should be able to add most business partner fields. As the report is set to portrait by default, I recommend changing it to landscape so you have lots more space to add the extra fields you want. This report writer is fairly intuitive, if a little basic.
You will need to save this new report design, set it to be the default layout and then when you select to print the Customer Receivables Ageing report (ie Print Preview or Print) you will see the new report.
Hope this helps,
Owen

How to write a procedure to retrieve data in a collection from a table?

create or replace type Subject as object(
subject_id number,
subject_Desc varchar2(50)
create or replace type Subjects_All as varray(10) of Subject
create table student(
StudentID varchar(10),
Subjects Subjects_all
so how do i write a procedure to display info such as this:
Subjects:
101 'Maths'
102 'Science'
Subjects:
I wrote a procedure like the following but it didn't quite work :(
CREATE OR REPLACE PROCEDURE StudentLoop AS
all_subj subjects_all;
each_subj subject;
CURSOR all_subjectsrow IS select * from student;
BEGIN
FOR all_subj IN all_subjectsrow LOOP
FOR each_subj IN all_subj LOOP
DBMS_OUTPUT.PUT_LINE('Last row selected has ID ' || each_subj.subject_id || each_subj.subject_desc );
END LOOP;
END LOOP;
END StudentLoop ;
Any Advice?

Hello,
1.) Don't store Types in Tables. It will become a nightmare when you want to query your data any other way then retrieving your object types. Just don't do it.
2.) A more relational model is much easier. Considering students and subjects is a n:n relation (a student can have more subjects and a subject can have more students) this might look like this:
SQL> r
1 declare
2    cursor cStudents is
3      with student as (
4        select 1 student_id, 'test1' name from dual
5        union all
6        select 2 student_id, 'test2' name from dual
7      ),
8      subjects as (
9        select 1 subject_id, 'Maths' subject_desc from dual
10        union all
11        select 2 subject_id, 'Science' subject_desc from dual
12      ),
13      student_subjects as (
14        select 1 student_id, 1 subject_id from dual
15        union all
16        select 1 student_id, 2 subject_id from dual
17        union all
18        select 2 student_id, 2 subject_id from dual
19      )
20      select a.name name, b.subject_desc subject
21      from student a, subjects b, student_subjects c
22      where a.student_id = c.student_id
23      and b.subject_id = c.subject_id;
24 begin
25    for rS in cStudents loop
26      dbms_output.put_line('Student '||rS.name||': '||rS.subject);
27    end loop;
28* end;
Student test1: Maths
Student test2: Science
Student test1: Sciencecheers

Possibility to register Pre-/Post-Procedures for an SQL Template Handler

I would appreciate to see the possibility to register pre-/post-procedures for an SQL template handler in ORDS 3.0.
Why:
We use Oracle VPD/Row-Level-Security to secure data access. Hence a trigger sets a couple of attributes in the database session context at login time which are then used in static RLS predicates to limit which records the user can see/modify.
With ORDS 3.0 all sessions are opened under the same technical user (e.g. APEX_REST_PUBLIC_USER), hence all users have the same/no attributes in the session context and could see/modify all data.
To avoid this situation, I need to set the attributes (e.g. the authenticated user) in the database session context before the actual query/plsql handler is executed.
Also, resetting the session context after the handler is executed would be good.
This scenario is in line with scenarios 'One Big Application User' and 'Web-based applications' in http://docs.oracle.com/cd/B28359_01/network.111/b28531/vpd.htm#DBSEG98291.
Different solution approach:
Kris suggested to write a PL/SQL handler where the pre-procedure is called before the business logic procedure/query. This is ok for me as long as I modify data and only need to return no or little data.
As soon as I need to return a lot of data (e.g. select c1, c19, c30 from t1), this approach will force me to write a lot of code in the PL/SQL handler in order to marshal the c1, c19 and c30 to JSON and put it in the HTTP response.
But this is the beauty of ORDS - I can simply define a template, write a GET SQL Handler 'select c1, c19, c30 from t1' and have the data available as REST service, without writing any code to write JSON marshaled data in the HTTP response.

I tried to log the request at Oracle REST Data Services (ORDS) but I could only start a new discussion: Possibility to register Pre-/Post-Procedures for an SQL Template Handler
As I mentioned there, the PL/SQL handler approach works for me as long as I have no or only little data to send back to the client (e.g. put/post/delete succeeded or an error message why the call failed).
If I need to return a lot of data from the PL/SQL handler I would need to, as far as I understand, to marshal the data to JSON and write it to the response body in the PL/SQL handler.
I don't want to do the marshaling, because ORDS does it better.
However, this works for me:
I write a pipelined stored procedure that takes as input the attributes I need to set in the session context. I then can reference it in the SQL handler:
select * from table(my_pipelined_function(:USER, ....)
Now the JSON/HTTP response is created by ORDS again.
I still needed to code a couple of lines, but it is way better than duplicating the functionality already existing in ORDS.
With the hooks it would be perfect because I would not have to write any code (apart from the procedure to set the session context attributes), just configure the REST services in ORDS.

Wanna write a Procedure for..........

Similar Messages

Maybe you are looking for