Want pull the PO's for those PO value exceeds certain limit.
HI SAP Gurus,
I Want pull the PO's report for those PO value exceeds certain limit ( Example I want to pull the PO's which value is more that 5 million USD for period of 1 year)
Thanks and Regards,
SHARAN.
hi
Try the table EKBE with fields WRBTR( invoice document amount) , DMBTR (Line item amount in the local currency for GRn Quantity) EBELN- (Purchase order). This will give you the details. Do check a test case with tolerance at Invoice level and post additional amount for Invoice and check the Table field updations.
Also ,
Try it in Tcode SE16
table Name EKBE.
Or,
May be use can use standard report ME2N, with selection parameter: GUTSCHRIFT (Invoice exist), it will give you all the list of PO with invoice. Here you can check the conditions as you need.
I hope it helps.
Best Regards,
Rahul.
Similar Messages
-
How can i pull the payment transactions for each invoice?
Hi folks
iam developing report for following requirement.
want to disply the vendor transaction file for all company codes Fiscal year,of 2004,2005,2006, and 2007 (to date).
The purpose of oureport is to analyze our company invoices and investigate potential overpayment opportunities. In order to effectively accomplish this, we need a single invoice record for each invoice that was received by compnay from their vendors. The single invoice record would contain at least the following columns: Vendor Number, Vendor Invoice Number, Invoice Date, Invoice Amount, SAP Document Number, Check/Wire Number, Check/Wire Date, Check/Wire Amount. SAP would have multiple rows in a table for any one invoice, whereas we would only want to see ONE row for every vendor invoice.
if you know that company pays (for example) 75,000 invoices/year - then the transaction file you would have about 300,000 records in it. 75,000 Invoices * 4 years.
inodrer to develop this report iam using table PAYR -payee
BSIK ( closed items) BSAK ( open items).
my question is any one tell me how can write logic to pull the payment transactions for each invoice?
regards
neeruHi rob,
yes you are right, an invovice may contaion duplicate records
example PAYR table contain
invice no compnay code checkno vendor fisclyear
( doc.number)
2000134373 001 10287200 2007
2000134373 001 10427890 2007
so as per my requirement how can i write the logic.
regards
neeru -
How should i get the delta data for those new object's previous delta data?
Hallo all,
i have 2lis_11_vahdr and i am using a standard and loading delta! now i have appended some new fields in the datasource then in infosource then in ods and infocube..! now how should i get the delta data for those new object's previous delta data???
JimmyHi,
After appending new fields in the datasoure.It is not possible to delta load, u should have to load everything
Thanks,
Shreya -
Has Apple pulled the SMC update for the Macbook Pro Retina from the App Store
Does anyone know if Apple pulled the SMC update for the Macbook Pro Retina? I can no longer see it as an update in the app store. I am refering to the update that enables power nap on the Macbook Pro Retina.
It showed up in my ML App Store.
What is your SMC version?
Mine is
SMC Version (system): 2.3f28
and I don't have the update installed.
Message was edited by: psedog -
How to get the inheritance level for an atribute value
hi,
i have to get the inheritance level for an attribute value for a given user in Org.struc.Hi,
Check out table T77OMATTUS for inheritance level for an attributes
Regards,
Neelima -
iTunes keeps on saying I'm entering the wrong passcode for Remote, which I'm certain I'm not. What can I do?
Enter the correct passcode.
If running a current version of iTunes and using the same Apple ID on the remote app and in iTunes, there is no need or prompt for a passcode. -
Pulling the Header text for all the purchase orders
Hello,
Please help in resolving the below:
Is there any code in SAp to pull theHeader text for all the purchase orders in the data base,
Any tcode to pull the specific text automatically to pull the text from the requsition ( Plant wise in sourcing).
ThanksSTXH Text header
STXL Text detail
Chk the below message thread
Table to read PO Header text and item text
BR,
Krishna -
When will apple stores have business/productivity workshops after the 5pm time weekdays for those that work?
You would need to talk to the store managers about that; we're just fellow users here. I would guess that they schedule workshops during the day when traffic is lighter so as to not impact and be impacted by evening retail traffice.
Regards. -
Crystal reports 2011 failure to pull the master data for AP Items
I am using businessobjects 4.0 and i am also running crystal report 2011.I am connecting to a sap erp ecc 6.0 ehp4 without any issue.The challenge comes when trying to input or pick the master data for example company code .The crystal report does not populate the company code field with master data.Any suggestions?
Hi Venkateswaran,
FIrst of all thanks for offering help...
uploding screen shots, below mentioned screens are captured when I was creating a new report on CR2011, usning SAP standard table "T001", there is no parameters, it is simple report but I didnot get data, if i browse the field through Cystal report is says Data Size is 0.
I also would like to inform you that If i use crystal report 2008 SP3 for same ERP, Same table and same fields, then i get proper data/report. -
Number of entries in the internal table for perticular field value
hi All,
Is this possible to get the count of records from the internal table for a perticular field value.
currently my requirement is to get the entries from the internal table which does not have two records for perticular field value (say a = 123) whose status is active (say b = 'X').
also suggets should use LOOP or DELETE or DESCRIBE for a internal table to ful fill this requirement.
Thanks in advance.
PradeepTry like this..
Create another table itab2 with same structure as itab1 & move the contents of itab1 to itab2
ITAB2[] = ITAB1[].
Then delete entries from itab2
Delete itab2 whete a = '123' and b = 'X'
Then use Describe statement to get the no of entries
Describe table itab2 lines v_lines.
Hope this helps... -
I purchased a lightroom 4 on disc several years ago. In 2013 I purchased an upgrade to lightroom 5 via a download. I have all the activation codes. I uninstalled lightroom from my old laptop and now want to download it to my new laptop using windows 8.1.
Where do I go to download already purchased and paid for copies of lightroom 5. I can put the verification codes when payment is requewsted. HELP!!!Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh -
I've tried configuring the ports first,before writing to them,but not sure if I'm using the right DIO config VI.
We modified the Write to Digital Line by adding the Task ID input. The idea is
1) Configure the port (iteration = 0) --> specify device and port. This is done only once at the beginning of the programm.
2) Then you use the task ID to write to a line of the port (iteration <>0).
I add a example to show you the general idea.
Attachments:
demo_do.vi 36 KB
modified_write_do.vi 53 KB -
Should I wrap the queries in a procedure with a @StartDate and @EndDate and create a test partition to pass a small date range?
Or can i use the Table properties screen to put the command there and will it run and not be affected or affect the partitions?This would be nice if this SQL statement on this screen was independent of the partitions and I could just leave it with the the
command text = EXEC TransactionDetail '2014-01-01', '2014-05-31' Especially since if you have many tables that load based on a date range. i would not want to jump in and change that query on all of them.
Is there a a way to have a parameter in the project so all tables would get the same @startDate and @EndDate so I could change it in one place?
And I am not stuck to these questions\options, If there is a better way to mass change the queries to run a subset of data for the designer I'd like to hear it.
Thank You,
PhilHi Phil,
According to your description, you are looking for the best way to control the rows that are loaded into a table, right?
When importing data to a table of tabular model, we can apply filters to control the rows that are loaded into a table. After you have imported the data, you cannot delete individual rows. However, you can apply custom filters to control the way that
rows are displayed. Rows that do not meet the filtering criteria are hidden. For the detail information about it, please refer to the link below.Filter Data in a Table (SSAS Tabular)
If I have anything misunderstand, please point it out.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here
Charlie Liao
TechNet Community Support -
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/810160]''
This just started happening a few days ago. When I go to facebook the pictures are distorted and nearly impossible to discern who is in them. I also go to many different websites that do not load correctly. Not sure if it's java, adobe, or something else but it makes browsing the internet not fun. HELP!I have the same problem. It seems to be due to FireFox 4.0 being unable to load certain embedded content, which Firefox 3 was able to load properly.
I've been having problems loading any website that includes embedded content from worldnow.com, for example. -
APEX 3.0 Displaying the URL link for a column value ( only when not null )
Consider the example :
I have the following table with a column that may have urls to documents
Row Column ( url_column )
1 http://xyx.com/doc/doc1.pdf
2 http://xyx.com/doc/doc2.pdf
3 (null)
How do i display the column so that a the link shows up only if a value exists.
Setting the URL to #URL_COLUMN# in the 'Column Attributes' screen creates a problem when the value is null ( for Row 3 in above eg.)
Thanks for your helpI would handle it in the query itself, something like
select x, y, z,
decode(url_column, null, null,
'<a href="'||url_column||'">'||
url_column||'</a>') as url_column
from wherever
Maybe you are looking for
-
I am trying to run windows on a MacBook Pro using bootcamp.
Can anyone help? I am trying to run windows 7 on my MacBook Pro, 17 inch late 2011, Mac OS X Lion 10.7.5 Intel HD Graphics 3000 384 MB This what I've done I used disk utility to format a 8g flash drive in MS-DOS (FAT) format. Then I went on the micro
-
Repeat Line item prints on every new page of smart form of Service PO
Dear Sir, I am facing following Problem & need abaper help. example:- PO type is Service Line item 10. Transportation 1 AU under this activities 01. Transportaion by Tree wheeler 3 Rs/ KM 02. Transportaion by Four wheeler
-
How do I output the program monitor from Premiere Elements 13 to an external TV monitor?
I can find information about dual monitor set ups, but is it possible to output the program monitor only to an external monitor? If so, what is needed? I'm using PE`3 on a PC with Windows 7 64 bit with an NVIDIA Quadro NVS 290. Thanks
-
Problems is stock transfer delivery
Dear All, i am facing problem in delivery.i created stock transfer with reference to purchase order. But in delivery number, quantity is coming less.means in PO quantity is 20 KG but in delivery it showing 9 kg only. i cheked in MMBE tcode for partic
-
Hello. I have some jsp pages that include other jsp pages using the @include directive. The included files reference variables in the parent jsp and I am getting compiler errors on the include files. What is the best practice here? How can I get a cl