Want Reader X to XI - 3 Issues

Hoping to Upgrade Reader X to XI .... BUT ... (1) Control Panel shows an Adobe Reader 10.1.3 MUI at 542 MB ( 6/13/12) -AND- Adobe Reader 10.1.6 at 118 MB (2/25/13). WHAT did I do wrong to get TWO Installations? DELETE 10.1.3 - OR - Leave alone?
(2) WILL Reader Upgrade to XI have ANYTHING to do with Firefox 19.0.2 showing that the ACROBAT Plugin is OUT-of-DATE? Acrobat Plugin 10.1.6.1 shows in Firefox NOW.
(3) Have NOT seen the words "You Install Reader XI OVER X - OR - DELETE X and Install XI. Where are the HOW to Upgrade Instructions?
Thanks for any Help given.

I've got 11.0.2 Installed BUT the 11.0.2 Update "from the App HELP" Failed due to a "Permission" issue.
One of the Trouble-shooting suggestions for a terminated Install was the 48 MB EXE Download - which WORKED.
BUT, I have 2-Reader Lines still in Control Panel - 11.0 at 568 MB - and - 11.0.2 line at 126 MB.
PDF's opened from Explorer and a Browser Site - so it works.
WHAT ISSUE Rating do 2 Control Panel Reader Lines have in the scope of things?
Thanks again for the Help!
Can't figure the choppy page Formatting - sorry.
Message was edited by: Cosmo26

Similar Messages

I have over 300 pictures on my phone...my question to someone iphone savvy is why, when I plug my phone into the computer is iPhoto showing no pictures? I want to delete them for space issues. Thanks

I have over 300 pictures on my phone...my question to someone iphone savvy is why, when I plug my phone into the computer is iPhoto showing no pictures? I want to delete them for space issues. Thanks

I've seen this happen when the phone was encrypted... Other than calling apple/deleting passcodes I don't know of any solution.
If you're keen on waiting, upload your photos to dropbox, that's the way I do it.

I want to buy a new Macbook pro 15", but I don't like Lion, I want Leopard installed, is there any issues with drivers or any other I should be aware of?

I want to buy a new Macbook pro 15", but I don't like Lion, I want Leopard installed, is there any issues with drivers or any other I should be aware of?

Hello, I've tried Lion from the day they released to last week I got my computer formated and with leopard again, on my iMac 24" from early 2009 2.9 Ghz core 2 duo, and I have installed 8 Gb of memory, and i have some complains about it, there are some cosmetic issues but mostly I'm concerned about issues bellow the hood, as I'm a stock trader and I depend completly from my computer's performance, let me explain:
Superficial issues:
1. They took off "spaces" and I liked it.
2. I dont use the magic mouse, I need a more accurate mouse for my charts, and it seems they built the entire OS assuming you would use the magic mouse for gestures, scroll, etc to try to mimic in some way the Ipad and Iphone functions, but what if you arent using it like me?
3. I never used that little rocket icon that makes all your apps appear and that could be one of the "improvements on Lion", at first sight it looks nice and slick, but if you try to use it and make it part of your daily use, you would find it is useless, it is a pain to try to arrange it the way you like it, so I rather use the spotlight to search for my apps, its faster.
Now the MOST important, 'performance':
1. It completly suffocate my computers hardware Leopard much more lighter, beggining from the start up that taked almost 1/3 or twice the time, and I think Lion has some bugs bellow the hood, i was doing my normal stuff, some apps running and everything, and suddenly I started to feel the computer a little slow, safari taking forever to open the pages for example, and I opened the activity monitor to see what was going on, and it was there, I was using 4 or 5 gb from my memory, and CPU making insane peaks, and Im using 2.46 gb as im writing it doing exactly the same stuff, (but Im happily using Leopard now), and it wasnt once, as i told before, I used lion since the day they released it and happened several times until it drove me nutts. But leopard not problem in that regard at all, Never.
hope this helps, and hope some apple guys read that because lion resulted in a big disappointment for me.

I want read PDF file from SAP directory and create a spool request or print

Hi all,
I want read PDF file from SAP directory and create a spool request or print the pdf through SAP. Can any body help me in this.
Also please write to me if its possible to open PDF from SAP directory to adobe pdf reader.
Thanks in advance,
Sunny

Hi Sunny,
Check these links.
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
http://www.erpgenie.com/sap/abap/pdf_creation.htm
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
Hope this resolves your query.
Reward all the helpful answers.
Regards

I got the following for Adobe Reader that there was an issue with it. C:\Program Files (x86)\Adobe\Reader 11.0\Reader\NPSWF32.dll file How do I fix this? Thanks.

How can I fix this problem. I got the following for Adobe Reader that there was an issue with it. C:\Program Files (x86)\Adobe\Reader 11.0\Reader\NPSWF32.dll file

Try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then reinstall.

I've read others' posts on this issue and still need an answer that works. Safari keeps dropping wireless; no issues on a Dell laptop with XP in same room. Cleared cache, etc. - any other ideas?

I've read others' posts on this issue and still don't have an answer that works! Safari keeps dropping wireless connection every 5 - 10 minutes (it's gotten progressively worse over the last month). My husband, sitting 10 ft across from me, has no issues on a Dell laptop with XP so doesn't appear to be the router or ISP. Safari v5.0.6 Mac OS 10.5.8. Cleared cache, tried kill commands in Terminal, restarts, etc. Only restarting seems to keep it at bay for a period, but then it will start again. Any other ideas?

You posted a question about a problem connecting a Mac to a wireless router. You have an old Dell laptop that works well with that router.
I pointed you to a brief discussion with another poster who had a problem connecting a Mac to a wireless router. He had an old Dell laptop that worked well with that router. I suggested he upgrade the router firmware. He upgraded it, and the problem was solved. Another poster in that thread did the same thing, and his problem was also solved. Within the last day or two, I made the same suggestion to a third poster in another thread, and his problem was solved too.
Conclusion: Upgrading the router firmware helps sometimes.
If I understand your response, you think that checking for a firmware update isn't even worth a try. Am I missing something?

How to keep Reader from being installed if running Pro? Running Acrobat X Pro. Occaisionally, a website with a PDF triggers Reader to be installed on my system. NEVER want reader (that's why i bought Pro). How do i keep Reader from EVER being installed?

Running Acrobat X Pro.
Occasionally, a website with a PDF triggers Reader to be installed on my system.
NEVER want reader (that's why i bought Pro).
How do i keep Reader from EVER being installed?

I don't get a pop-up. Something triggers the Reader installer to be loaded on my system. This occurs without my knowledge. Then, the next time i go to open a PDF, instead of it opening immediately with Acrobat Pro, I get the first screen of the installation stuff for Reader (Accept/Decline Terms of use, etc.). At this point, i get out of the install, go into control panel and uninstall Reader (which is listed as a loaded program, even though i haven't finished the install). After i uninstall reader and open a PDF, it opens correctly with Acrobat Pro. This happens once or twice a month at least. Is it possible that the Adobe Acrobat Update Service task loads Reader on my system at some interval? How do i block Reader form EVER being installed or loaded?

Want to upgrade to CS6, but issue with AVCHD scrubbing might stop me

I've been using the Adobe Creative Suite for years and really love it. The last version I stuck to was CS5. Premiere Pro CS5 had no problems scrubbing my AVCHD footage (mts wrapper from GH2 cameras) and I wanted to upgrade to CS5.5 when this became available. Then a problem occured: although the project files (old and new) loaded a lot quicker than before, it was no longer possible to scrub through the footage. The lag was just incredible and I can see (and hear) my drives go mad as I try to scrub through the footage. I assume this is because certain things are no longer loaded at the opening of the project, but just when you look at the footage on a timeline.
I hoped the issue would have been fixed in CS6, but after a colleague kindly installed the software for a few days on my machine (spare licence he had, since been uninstalled), it is clear that it is still impossible to use. WHY?
I'm happy to upgrade some of my system to try and make this work, but I need to know what the problem. My current set-up is (no longer) cutting edge, but hardly bottom of the pile either. Any advice would be appreciated.
Current Spec:
6 core AMD processor 3.6Ghz
8 GB of ram
Nvidia GT440 card (cuda enabled)
MTS files and project files are on a 2TB raid 0 (though windows 7, not dedicated card) (2 drives 1TB each 7200RPM sata 3)
Thanks for any help.
PS: I tried with and without cuda, moved the media cache to other drive, disabled sound whn scrubbing,... pretty much everything

Niels,
I've seen them and will add them to the results page later today.
You end up around rank #630, somewhat as expected. Your disk score is quite acceptable and reflects your raid setup. However, your MPEG score is disappointing, but that may be attributed to only 8 GB memory and the relatively meager GT 440 card. However, in comparison with other Phenom II X6 systems, nothing really stands out.
Your dilemma to improve the scrubbing behaviour is twofold: You are hindered by the slowness of the Phenom II X6, and whatever you will upgrade, but keeping the AMD CPU will only marginally improve performance. If you really want to improve performance you need a completely new Intel based system, but that is costly, requiring a new CPU, mobo and memory.
Upgrading memory does not look attractive, since it will not really help performance and is not portable to a new Intel system.
The only things that can help IMO and that can be ported to a new system in the future are extra disks and a better video card. I would start with additional disks, see if that solves the scrubbing issues. If that still is not enough, you can consider upgrading the video card to a GTX 670 or even a GTX 560 Ti if your PSU can handle it.

FIXED!!!! Please read if you are having issues!!

My husband bought me a new Ipod Video in September and after upgrading to Itunes 7 I have had nothing but problems and issues. I was so close to selling the Ipod and buying a Zune.
My IPOD wasn't being recognized by Itunes and when it was being recognized it needed to be restored or was corrupt. I tried everything on this discussion board and was on my last effort when my husband called Itunes support. The problem was my printer that is also connected with a USB port. Once I disconnected the printer - the Ipod worked!!! So if you are having issues try disconnecting everything else that is connected to your computer through a USB cable!
I can't believe it was something so SIMPLE!!!
Happy Holidays and Best of Luck!

Now, do you have to disconnect your printer everytime that you want to use it? If so, this is just a temporary fix and that's not something that you should have to do with regularity.
It's GLARING, the amount of people who are having issues with this software. Is APPLE listening to its customers? I'm to the point where I'm about to NOT recommend an I-Pod to anyone that asks. If they do, that's what I'm recommending. I'll also steer them to this website so that they can see with their own eyes, the problems that everyone is having.
This is totally ridiculous. I've been trying for THREE weeks to get my POS I-Pod Shuffle to download songs through I-Tunes 7.0. It's clear to me that these designers of this software haven't got a clue.
Sorry for the rant but I've had it with this junk.

Vendor lost check. Want to void them and re-issue new check.

Here's ther problem:
I have 2 checks (#37931 and #38176) that were issued in fiscal year 2010 that have been lost by the recipient. As a result, I need to void these checks and reissue payment. The checks were issued out of company #####. At the end of October, Accounting Clerk did a posting to clear the intercompany account. This clearing document took her apparently over 4 hours to post, so it cannot be reversed.
However, this clearing document is preventing the checks from being able to be voided. If we try to void the checks, we get the following message.:
Document #### 2000004550 is not purely a clearing document.
Message no. FS 601
Diagnosis
Payment Document ##### 2000004550 is company code ##### also contains the clearing docuement number 100000777 in addition to its own clearing document number. As a result the documents cannot be reversed after resetting the cleared Items.
System response
The payment cannot be reset.
Procedure
Check the data entered and correct your entry, if necessary.
If the payment for document ##### 2000004550 is really to be reset, the cleared items 100000777 have to be reset prior to this
Can someone think of a better way to handle this correction as you can see the clearing step took 4 hours to complete..

hi,
as i understand it, you only want to void the checks and then reissue a new one without having to cancel the payment, right?
If yes, you can voice the checks via FCH9 and then reassign a new one via FCH5.
regards,
Chaikaru

I have read all of the similar issues on this site and I still cannot connect my airport extreme (although there is no problem with my old airport express - help...

i have read all of the numerous and similar issues on this subject. and i still cannot connect my new airport extreme. my old airport express works fine still. help. and why are there so many issues with connecting this stuff? i thought this stuff was supposed to be getting easier, not harder... thanks.

Sorry, but I have no idea on what you have read and tried so far so please forgive me for any redundancy.
Is your AirPort Extreme the only router in your current network configuration? Which exact model is it? If there are other routers being used, please provide their make(s) & model(s). Also the make & model of your Internet modem.
What is your goal with the Extreme? Is it to replace the "old" AirPort Express? Will you still be using the Express for any reason(s)?

Is it possible to have access to PU12 in read only to avoid SOD issues?

Hi
We would like to provide PU12 to a small number of users for troubleshooting purposes with our payroll interface, however PU12 transaction is one that is a SOD issue, namely: 'Modify payroll master data and then process payroll. Potential for fraudulent activity'
Is there an equivalent read only transaction that SAP has to view the export history data possibly, or else a way to change the settings of PU12 to make it read only via a custom tcode?
Any advice would be very helpful.
Thanks
Nicola

Hi,
Make the variant of the screen and provide the separate Tcode using SE93.
Good Luck
Om

Adobe Acrobat Reader 10.1.2 Print Issues - Windows Crash Error (2 Sided)

Have recently had issueswith our upgrades from 10.1.1 to 10.1.2 in regards to the following:
When printing 2 sided on a Fuji Xerox Firefly C4400 Atheros, application crashes after printing first 4 pages.
Thus, have tried the patch fix that was recommended on cpsid_92870 however this has not fixed the problem.
Have also tried the solution with the duplexing but still same issue, Windows crashes.
Have also tried solution to remove Windows patch KB4332667 and still same issue.
Screen shots will be provided upon request with the errors.
Currently running:
Windows XP SP3
Adobe Acrobat Reader 10.1.2
Printer Drivers are the latest and over 500 users on network. 485 are working on 10.1.1 which do not have this issue.
Is there any solution or 10.1.3 patch release that will address this issue?
Last Adobe user to work on this was Atul.

Sonal2890, thanks for your inquiry and I will try to provide as much information as possible.
1. What happens if inspite of using 'Print on both sides', you check Duplex setting from Properties dialog (As you do previously)?
      The Adobe Reader X Shuts down and is unable to print and displays a message stating it has incurred a problem. Please note, we are running IE7.
2. What happens if you print with any other application (Word/notepad)
     The documents print fine. IT is only when you print this particular document which is enabled in protected mode and double sided. Have tried the patch and the resolution of unticking the duplex methodology and the issue still persists.
     Crash Logs have already been submitted already. Have added the SEnd Error Report that was provided when the error occurs. The PDF stopped printing after page 6 of a 236 page document and provided the error above.

Marking Fields as Read-Only After Digitally Signing Issues

I am creating a PDF form that contains several digital signatures. I am selecting a signatures and am in the property options for that specific signature looking at the "Signed" tab. I select, Mark as read only, than choose "Just these Fields.
When I select "pick" a new box opens that lists all the fields in my form with a check box next to each. It appears that I can select the fields I want to mark as read only, however, when I attempt to check a box, nothing. I can select "select all" and all the firlds become checked, but I cannot check individual fields.
Any thought on what might be going on?

Hi Thomas,
Any chance you could share the PDF file if I gave you an e-mail address?
Steve

I want to confirm a best practices issue - Acrobat XI Standard Forms used on an Apple OS - is this an issue?

I am creating forms in Acrobat XI Standard on a Windows 7 64 Bit machine. I am reports that the forms do not work and I am seeing screen prints where the fonts in the form fields are larger and displaced than those in the original form I created. This is happening on an Apple product. So is this an issue? I read a post from 2007 saying that it was. But is it still today and if so, is there a way to deliver a form that works in Windows and in Apple while using Acrobat XI?
Thanks

The issue is not just Mac Preview. You must, as a form creator, be aware that anyone getting a computer or tablet today will have a PDF reader, or several, and not Adobe Reader. Not unless they choose to get it, and you would need to give them a compelling reason to both install and work out how to use it. Readers people will have include
* Mac OS Preview (command and used in Safari browser)
* Windows Reader (with Windows 8)
* Chrome, Firefox (browsers with built in PDF viewers)
* iOS (iPad, iPhone) built in PDF (also Adobe Reader, while available, is very limited)
* Android (tablet, phone) built in PDF (also Adobe Reader, while available, is very limited)
* ChromeBook - built in PDF, no Adobe Reader app.
The hardest part is not geting people to install Adobe Reader, but to understand that, even if they have done so, that their browser probably doesn't use it.
Some PDF viewers ignore forms, some have limited forms support. The worst common one is Preview, as it appears to have form functionality, but it makes broken forms. Apple have no interest in fixing.

Want Reader X to XI - 3 Issues

Similar Messages

Maybe you are looking for