Want to copy actual data to plan version for profit & cost center

Hi,
I want to copy data from actual to plan data for first half of the financial year.
I was trying with T-Code CP98 . Are any Configration settings required to be done?
But facing error "you have not selected a traget project" 
Is there any other way out for doing these activity?
Thanks & Regards,
Mayur
Edited by: Mayur on Feb 23, 2010 11:56 AM

Hello Mayur,
Please try with KP97/KP98 transactions.
I suspect, that you are giving wrong target plan version.
Please check your entries once again.
Regards,
Praisty
Edited by: Praisty on Feb 23, 2010 12:04 PM

Similar Messages

  • Copy actual data to plan version

    Dears,
    I have a requirement wherein business has maintained plan data for balance sheet GLs in GP12N for version 1 for 6 months. Now the requirement is to copy actual data of first 6 months to next 6 months in version 2 (forecast) and start comparing actual/plan/forecast. I tried copying in FAGLGP52N, but it allows only from plan version to another plan version.
    Please suggest if there is a way to copy actual data to plan version.
    I have another requirement to display plan version data of cost element (PL) which we maintain in KP06/7KE1 in F.01.
    Thanks,
    Lokesh

    Try to use Plan version (000) where the Actual values are posted in this version.
    Cheers,
    Sarhan.

  • Copying Actual data to Plan (T-Code KP98)

    Hi Guys,
    I am Copying actual data posted in 'X' cost center with version '0' to 'Y' cost center with version '1' through t-code KP98.
    While copying I am selecting only Primary costs and Activity quantities.
    I am able to execute the transaction witout any errors and it is giving a log that 'X' no. of records are copied, which is perfect.
    But the problem is when I verify data in target cost center i.e. in 'Y' cost center it is showing some different values.
    The target values are not reconciling with source values. It is copying activity quantities perfectly but actual costs it is giving some wrong values. I don't know from where it is getting those values.
    Can any one help me in this?
    Thanks
    Ravi

    Hi
    You can't transfer actual of one cost center to plan values of another cost center using KP98. You can transfer actual of the same cost center to plan for the same cost center for different period.
    You can transfer plan of one cost center to plan of another cost center through KP97.
    Regards,
    Suraj

  • Copying transaction data between planning version - Not delete existing dat

    Hello all.
    I made copy from one version, like 000.
    The result is Version A1 and A2. I copied everything(Master Data and Transaction Data).
    For each version, i ran a MRP. But in differents periods. Like October and November.
    After MRP, i have a lot Planning Orders in A1 and A2. But in differents months.
    My question is: I want to merge A1 and A2 in another version(Merge only  Planning Orders). How i can do this?
    Using /SAPAPO/MVM or /SAPAPO/VERCOP i can copy all data from source to target. But always delete previous data.
    Thanks
    Best Regards.
    Marcelo

    This isn't the answer you WANT to hear.   But there's no way to my knowledge to achieve your requirement using standard version copy functionality in APO.
    One way to preserve the data for alternate / merged versions that I've found useful is to use the /SAPAPO/REL_TO_OLTP transaction to send volume data to the ECC client.  If you are loading both inactive versions to BW, then you should be able to release that data from BW to ECC inactive/"long-term" simulation versions where it can be aggregated.  That is to say, you could send A1 and A2 separately and they will simply add to one another, not overwrites (delete and re-create).
    This being said, requirements using this transaction are sent as planned ind. requirements in ECC.  This may not be the desired outcome that you're looking for, so you might have to be careful which key figure you send to represent volumes.

  • Actual Assessment Cycle - Multiple Segments for one Cost Center

    Dear experts,
    I've got one very important (for me) question:
    I want to distribute a cost centers (primary) cost in two ways - at the same time:
       First: as a fixed value to three other cost centers and
       Second: the remaining cost shall be distributed to all cost centers of a cost center group
                    with an statistical key figure.
    Is it possible to distibute the remaining cost after a first distribution??
    If yes, how is the procedure to do so?
    Thank you very much in advance.
    Ralf

    Hi Ralf,
    It's certainly possible; just create two steps, one after another, and you will achieve your goal.
    Regards,
    Eli

  • How to copy actual data into current forecast period

    Hi gurus.
    I need your guidance on how to copy actual data into current forecast period.
    This is my case. Let's say I have the following figures for my actuals:
    January 2007 Actual = $110,000.
    February 2007 Actual = $120,000.
    March 2007 Actual = $80,000.
    April 2007 Actual = $100,000.
    Now, my user want to choose any month as the basis for her forecast for the remaining periods. Let's say, she wanted to choose April 2007 Actual as the basis for the remaining forecast periods, so I should be able to display the following figures in my planning folder:
    May 2007 Forecast = $100,000.
    June 2007 Forecast = $100,000.
    July 2007 Forecast = $100,000.
    August 2007 Forecast = $100,000.
    September 2007 Forecast = $100,000.
    October 2007 Forecast = $100,000.
    November 2007 Forecast = $100,000.
    December 2007 Forecast = $100,000.
    Can someone guide me on how to do that?
    Points will be given to good and best answers.
    Thanks.

    Hi Fulham,
    Technical answer:
    First, you need to allow your user to indicate wich month is the reference for the copy. I suggest you to add a new key figure in your actual layout (a 'customizing' layout) that your user will use as a flag:
    January 2007 Actual = $110,000
    January 2007 Flag = 0
    February 2007 Actual = $120,000
    February 2007 Flag = 0
    March 2007 Actual = $80,000
    March 2007 Flag = 0
    April 2007 Actual = $100,000
    April 2007 <b>Flag = 1</b>
    <i>(Help to a fox or an abap exit you can check that only one month is 'flagged')</i>
    Then, in the corresponding level for the data input, you use a function exit in Abap, which will:
    - read the previous customizing layout help to API_SEMBPS_GETDATA so you can get the flagged month and its actual amount ($100,000)
    - generate the news rows into the table XTH_DATA which will be automatically posted in the level with the actual amount
    Is that clear?
    Regards,

  • I want to copy myt data to my iPhone via itools the error occured is unable to ascertain the compatibility of itunes   my itools and itunes  both are updated. please help

    i want to copy my data to my iPhone via itools
    the error occured is
    unable to ascertain the compatibility of itunes
    my itools and itunes  both are updated.
    please help

    The following fix apparently worked for some: https://www.youtube.com/watch?v=yEgm8m__Ipg

  • Reporting planning/actual figures for Expenses (Cost center wise)

    Hi,
    We have uploaded Planning for Costcenters for few accounts, which we want  to seen through F.01 in trial balance format.
    Where we can see planning figures for profit center as well as cost centers for given Financial Statement Version (FSV)
    Actuals vis a vis the planned ones
    Is there any other report on Profir center basis where we can view for the month Actuals & Budgets?
    Upload is done in Verrion 1 (managment Planning)
    Regrads,
    Mayur

    No PCA is not activated. ( as it duplicates the data. We are using ECC 6)
    Yes Cost centers are attached to Profit Centers.
    I am looking for both PC & CC wise Actuals vs Budget for a month in Trial balance format in a single report output.
    Regards,
    Mayur

  • Plan Versions for different country payroll implementation

    We implemented Indian Payroll Now we are in process of implementing USA Payroll for my company
    what would be the plan version Already we have one plan version in place that is for indian payroll Can we create one more plan version for usa payroll? How do i go ahead with confis please let me know experts

    Hi Priya,
    Please read this thread it is clearly explained. may it helpful to understand the process
    Plan Versions in SAP HR

  • I want to copy images to a memory stick for sharing with my family. This was possible in iPhoto via copy/paste but does NOT seem to be possible with photos...

    I want to copy images to a memory stick for sharing with my family. This was possible in iPhoto via copy/paste but does NOT seem to be possible with photos...

    You can drag and drop (this will result in a compressed JPG) or hold the alt key and drag and drop (this will copy the original). You can also select the pictures and choose Export from the File menu.

  • I want to delimit the date of table v_t7int1 for new sap note uploading

    Hi
    i want to delimit the date of table v_t7int1 for new sap note uploading. wtihout delimit the date i can't create new note for the year 01.04.2009 to 31.12.9999
    Anjali

    Hi
    When i select the slab code sl10 and press delimit button system is asking the From Date and i want TO DATE  and i have to Delimit the date of  slab code SL10, SL11,SL12 and SR02 and then i have to create SL13,SL14 and SL15.
    Anjali

  • I want to know my previous ios firmware version for iphone 4s because now I am using latest ios version 7.2 and I want to downgrade it but I don't know the previous version exactly for iphone 4 s

    I want to know my previous ios firmware version for iphone 4s because now I am using latest ios version 7.2 and I want to downgrade it but I don't know the previous version exactly for iphone 4 s

    The iOS is 6.1.3, problem is Apple will not sign the file through iTunes to install it on the iPhone 4S.

  • Defaulting CO plan versions specific to cost plan method.

    Hi Experts
    I wish to have dedicated CO plan versions as shown below:
    Z01: Overal planning
    Z02: Detailed planning
    Z03: Unit cost planning
    Z04: ECP
    For ECP,  the CO plan version can be defauled. Similarly is there any provision to default the specific CO plan versions for the remaining cost plan methods?
    This helps in preventing the selection of inappropriate version. And also provides clarity that the version it self indicates the cost plan method.
    Request experts to comment.
    warm regards
    ramSiva

    Dear Prasad
    Thanks for prompt response, Is there any impact if we create new version ? Is there any SAP suggested documentation
    Kindly revert
    Regards
    Anilkumar

  • Using the tcode:S_ALR_87013611, no report data  for the cost center

    Hi,Friends.I need a help.
    In the tcode FB60,i entered the following data and then posted the vendor inovice sucessfully.
    data:
    ( Note: G/L acct:55020141 is also a primary cost element)
    In the tcode:S_ALR_87013611,I entered the following data and executed.
    but the result is:{Report contains no data. Check the selection log}.
    data: { Controlling Area: C999, Fiscal Year: 2010, From Period:1, To Period:12,Plan Version:0,
            Or value(s):2001}
    (Note: Cost center:2001 belongs to Controlling Area: C999) 
    please tell me how to do,so that using the tcode:S_ALR_87013611, I can see the report data  for
    the cost center 2001.
    sincerely                      WenYao Ma
    Edited by: wenyao ma on Mar 22, 2010 1:09 PM

    thank you,friends.
    I just solved it.
    Solution:
    1) Maintain Controlling Area
       path:spro>Controlling>Organization>Maintian Controlling Area>Maintain Controlling Area.   tcode:OKKP
    In the {Activate components/control indicators}cost center should be 'component active'
    2) Maintain Number Ranges for Controlling Documents
       path:spro>Controlling>Organization-->Maintain Number Ranges for Controlling Documents.   tcode:KANK
      Element { COIN CO Through-postings from FI} should be assigned to one group.

  • Master data load for 0COSTCENTER (Cost Center) failing

    Hi Experts
    I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
    (R) Filter Out New Records with the Same Key
          (G) Starting Processing...
          (R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
    Could you help me on this one please.
    Regards
    Akshay Chonkar

    Thanks All
    I have got the issue resolved
    The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
    So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
    Everything is fine now thanks for your help.
    Regards
    Akshay Chonkar

Maybe you are looking for