Want to go, it either does not nd I cannot correct the one letter.

New to iPad. How do you move the cursor back without erasing everything you've typed? When I tap on the place I want to go, It either does not move, or the word highlights in pink and I cannot correct the one letter? I also cannot get the first letter in a case-sensitive situation to come up as lower case, even using the arrow key. Thanks for your help!

If you press and hold the screen then after a second or two you should get a magnifying glass which should allow you to position the insertion point more accurately - you can then re-position it back to the end of your text by the same method. You should be able to change the case by pressing the shift/up arrow key and then typing the letter; if you go back and delete an upper case letter then the letter that you type in its place will be in upper case unless you press the shift/up arrow button before you type it i.e. the case will default to the last deleted character.

Similar Messages

ICloud symbol in settings does not appear, instead there is the one for MobileMe, what do I have to do or didn't do well?

iCloud symbol in settings does not appear, instead there is the one for MobileMe, what do I have to do or didn't do well?
Thanks in advance

If your Mac is one year old it did not come with Lion, so you must have purchased and installed it yourself, or it is not installed.
Do this
Go to Apple Menu>About This Mac:
It should look like this:
If your version is anything other than 10.7.xx you do not have Lion (10.6 is Snow Leopard)

IPhoto 9 does not save edits, cannot see the edited photo except in the edit panel

Hi Friends,
I am a macbook pro user, OSX 10.6.8, iPhoto 9 - 8.1.2
The problem - noise edits of my pictures are not saved, I do not see the edited version of the photo in the iPhoto album or event, my photo prints only monochrome on the HP 1280 inkjet printer and that too only the original version.
Crop edits are however saved as are enhancements.
Solutions tried thus far - creating a new library by holding the "option" button pressed on launching iPhoto and importing pictures to the new library - no good.
I have seen the Library Manager based solution on these forums, so where to get the library manager.
thanks for your help
Ashish

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.

The search bookmarks does not work,it freeses up after one letter

a week ago the search bookmarks feature quit working, it lets you type maby 1 or two letters then freeses up. message says this program is not working and to quit and send a report,then i have to start firefox up again..help please

There have been such problems reported after updating to Firefox 3.6.12 and they may be caused by updating SQLite to version 3.7.1
See [/questions/759909]

Firefox 5 does not work, it cannot connect to the net

I have tried two times to install Firefox 5, but it does not work, it cannot find the net at all. It tells (in Finnish) "Muodostetaan yhteyttä" ("Creating the connection" or something like that in English) and it stops to that point of installation when there should come your Mozilla page up. I am using Win 7 Ultimate and F-Secure Client Security. Luckily it is possilble to install back the version 4.0.1. At my laptop with Win XP there is no problem with version 5.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls

The build directory of the test run either does not exist or access permission is required.

i am trying to run automated tests
i follow the steps in the web but when i have 2 issues that does not solve
1. i created console project and add build definition without drop folder and queue builds that success.
2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
5. when i try to associate the builds for the test plan i have a PROBLEM(1):
this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
and than when i try to run the automated tests i have this PROBLEM(2):
The build directory of the test run either does not exist or access permission is required. and the test failed.
Please Help
Roey

Hi Rory,
Thank you for posting in MSDN forum.
According to the error message:
(1) a pop up shown with error : " The build that you selected for this plan no longer exist "
I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
with yours like the following screen shot.
However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
I know that the error message occur in either of the following conditions:
1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.)
2. The build directory itself does not exist.
So please refer the following blog to check this issue:
http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error: This application required an Xtra (ActiveX...) that either does not exist or failed

Hi All,
im having trouble few days now , i hope someone can give me a lead here.
i have a director mx file written in arabic, i open it in Director 11.5, the file behave strangely, very slow publishing process, very slow access to the xtra list.
after publishing (shockwave and html), i open the html, the preloaded start to run but i can see its not reaching 100%, after a while i get the error massage:
"This application required an Xtra (ActiveX...) that either does not exist or failed..." and firebox or IE crashes.
In the movie extra list (Modify menu) i can see all extras, and all have "download if needed", but in ActiveX the "download if needed" grays out. i have no idea why
things i try with no success:
uninstall and reinstall shockwave player
check the same file in another machine
exclude and include xtras in Publish Settings > Files
add activex.x32 from other places
Hope for good news
Win Xp sp3
Thanks
Shay

In the movie extra list (Modify menu) i can see all extras, and all have "download if needed", but in ActiveX the "download if needed" grays out. i have no idea why
Because AX controls aren't SW-safe. You will have to redesign your file to remove the ActiveX control if you want it to run in a browser.

I want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help

want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please

If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.

"the specified domain either does not exist or could not be contacted"

Dear Experts,
I made an installation of BPC 7.0 MS SP04 in a multiserver environment. Installation process terminated correctly. My installation user is a domain user, and he's also local Administrator on my Web/Application Server.
I simply want to add a domain user to my ApShell: so I log on to ApShell with my installation user, then I click to "add a new user".
When I try to click on "Available domain [domain name]" to see domain resources, popup appears with the following message: "the specified domain either does not exists or could not be contacted".
I cannot browse in to the domain!
Additional information:
1.The domain has been added from BPC server manager ->define system user group->domain
2.The BPC server are in the same domain to which this domain user belongs .
3. I can browse the domain resources with installation user from Appl/Web server using start->control panel-> Administrative tools-> Component Services->Active directory.
4. It's possible also add another domain user on the security of any folder.
5. I restarted COM+ application "OSoftUserManage"
6. We have another multi server installation in the same domain, the installation user is the same, there is no problem about AD browsing.
Any help would be appreciated.
Regards,
Dario
Edited by: DARIO CUPPARI on Nov 3, 2009 3:23 PM

I opened a case with Microsoft and this problem has been fixed!
The issue was that I had both a Preferred DNS server (my local DNS server) and an Alternate DNS server (8.8.8.8, which I added for "good measure" in my ignorance) listed on the server. Removing the Alternate DNS server fixed the problem.
(Control panel/Network and Sharing Center/Change Adapter settings
Right click on your connection, choose properties.
Click on TCP/IPv4 (unless you are using IPv6...) and choose properties
Make sure there is only a Preferred DNS server listed.)
Why redundancy is not a good idea is a mystery to me, but in this case it isn't.
Peggy Thrasher

I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

It's almost certainly too late.
The time to create a backup is before a catastrophe. After a catastrophe, it's too late.

The specified domain either does not exist or could not be contacted when logging in through RDP. Server 2012/SBS 2007

I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at?
Jerry T

Hi Jerry,
Thank you for posting in Windows Server Forum.
After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
this thread)
If this is the case, I would recommend proceeding like that:
1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
4. Make each DC / DNS server point to its private IP address as secondary DNS server
5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
On the client computer, run ipconfig /flushdns and check again.
Hope it helps!
Thanks.
Dharmesh Solanki

"Server either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error driving me nuts!

OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
this error mentioned above:
"Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
a few questions:
1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
you know better than me that it is not the case here!)
2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
5.how would I fix it?
P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.

Hi,
Thank you for posting in Windows Server Forum.
The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
can create one external switch which might fix the problem.
Please check below article for information.
VDI Deployment Error About Virtual Switch
In addition please referthis article for information regarding virtual switch.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
Praveen

Hello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan

'Destination 'orgFilterService' either does not exist or the destination has no channels defined

Hi,
My code connects to remote object using the destination id as 'orgFilterService'. This was working fine, but all of a sudden it has started giving the below mentioned fault message.
fault--> [MessagingError message='Destination 'orgFilterService' either does not exist or the destination has no channels defined (and the application does not define any default channels.)']...detail : Couldn't establish a connection to 'orgFilterService'...errorID : 0...faultCode : InvokeFailed
I am creating the build in Flash builder, and it works fine in my local machine when run from flash builder; whereas, when moved to a UNIX box, it starts giving this error. Again, this was working fine in the UNIX box also before this build.
I have verified the entries in remoting-config and servivecs config - both are fine, and are untouched since from the last time it was working. Also, it is able to connect to other destination id, but not to this!!
Entry in remoting-config:
    <default-channels>
        <channel ref="my-amf"/>
    </default-channels>
<destination id="orgFilterService">
<properties>
   <source>com.jpmorganchase.pfitr.boreport.DrillOrganizationReport</source>
</properties>
</destination>
Entry in services-config:
        <channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel">
            <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
Changing the build doesnt resolve this error.Please let me know if any kind of refresh needs to be done or any temp files/cache needs to be removed.
Thanks,
Vipul Sharma

Ok, I'll get that a shot. I know the docs talk about using the project creation wizard, but I really would like to be able to just drop in Blaze as some jars and config files. So doing this by hand is my preferred method. Is there any docs talking about setting up Flex Builder projects to work with Blaze? Like the way you're telling me or is what you're showing me it. Because up to this point I've just added stuff to web.xml, create /flex/configs.xml files, and now this compiler param. I have not replaced the {server.context} etc tokens or anything in the configs. Do I need to change that? I saw some posts talking about using full paths instead of tokens, but that would make it a pain to deploy. However when I tried to set those like the post said, the compiler complained about setting those params twice. I'm guessing that means they're already set? However I would think those url prams would need to be relative so I can move my application from localhost to my domain.com server, right?

TS3716 My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music. I didn't have problems loading music originally, but this is a new occurrence. Could you help?

My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music. I didn't have problems loading music originally, but this is a new occurrence. Could you help?

Hey, Thanks a lot. It took quite a bit of time to resurrect this ipod. I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new. This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted. Finally, it recognized my ipod and started to download each song. It took awhile as there was 602 songs, but finally it works. Yea!!! I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information. This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone. Take care, Karen

Want to go, it either does not nd I cannot correct the one letter.

Similar Messages

Maybe you are looking for