Want to initiate all the LEDS one by one in VI

Hi,
In the attached VI I am controlling the LEDs on the front panel by selecting values of different enums values on clusters, Now I want to lit all the LEDs one by one by only selecting and sumbit only one LED through cluster from front panel.
For example:
If I am selecting
1TRK
ENA
Green
then first LED 1ENA_DG will glow green only but now I want to control two more LEDs i.e. 1ENA_HG and 1WSA_RG in a sequenece after 1ENA_DG
If more clarofication is required please let me know.
Thanks
Prashant
Attachments:
WIU-SIGNAL-ASPECT-SEQUENCE.vi ‏102 KB
DAQsignalAspect (SubVI).vi ‏112 KB

Hi,
What are those in the pink boxes. What is the function name? Can I use that in labview 2011?
The pink boxes are I/O Nodes (FPGA) and you need to have an LabVIEW FPGA module installed, in order to run the example, however with this example I just wanted to show you a possible way to light up the LEDs on your board by placing a boolean pattern within a case structure that has LED addresses as possible cases.
Also suggest for blinking LEDS I have some blinking LEDs which will be controlled by the sloid LEDs.
To make an LED blink you can use a Property Node. Right Click on an LED in your block diagram and select Create->Property Node -> Blinking. You can change the Property Node to Write and wire a True constant to the Blinking Property Node. Now to trigger blinking of one LED by another LED you can simply place a Property Node of a blinking LED in a case structure and wire the conditional input of a case structure to the boolean state of the solid LED. Refer to the example below.
Mikhail
RF Toolkits, Product Support Engineer
National Instruments
Attachments:
led.vi ‏6 KB

Similar Messages

Getting all the threads running in one JVM from another JVM ...

I want to get all the threads running in one JVM from another JVM.
Is it possible ?
namanc

I am going to write a java application that prints all the java application running at the background. And this application has a control over all the threads. means killing the threads, restart the thread etc
namanc

HT204406 i want to download all the songs from itunes match back to my pc. there are well over 2000 songs. instead of downloading one by one, is there a way to download all of them while I sleap?

I want to download all the songs from iTunes Match back to my PC (iTunes). Instead of downloading one by one, can I have all the songs downloaded back to my iTunes by one shot (while I sleap)?

I just found the answer by myself. Instead of clicking Cloud icon one by one, highlight all the songs in Cloud (after sorting by Cloud status) and riight click, download. Now I am getting all the songs back to my local machine. I will sync my iOS devices tomorrow and just GET RID OF iTUNES MATCH. To me, it was a disaster. Worse than their map app.

I can't view old iphoto libraries. It wants me to use a new version of iphoto but from all the commits here, no one likes it. Help! how do i get to my old libraries???

I can't view old iphoto libraries. It wants me to use a new version of iphoto but from all the commits here, no one likes it. Help! how do i get to my old libraries???

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when iPhoto opens?
what fixes have you tried?
where is you library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

HT1349 i just got my second ipad, i want to put all the music from my 1st one straight to my second, how do i do that?

i just got my second ipad, i want to put all the music from my 1st one straight to my second, how do i do that?

Set you 2nd iPad from your 1st iPad. If you have your music in your iTunes library, it's easier as you can set it up as a new device and then go to music>sync all music.
Once you set up you 2nd iPad from your 1st one, if you want do not want the other setting to be synced, turn it off. For example, in apps, uncheck everything and you can get rid of them.

I want to copy all the objects from one user to another... Please help

Hii Experts.... I have a problem here. Please give me solution for this...
I am using Oracle 11g on my windows XP system.
I created a new user named "some"
I want to copy all the objects from scott user to some user... Please help me
Please Explain me in detailed way
Thank you

SowmyRaj wrote:
Hii Experts.... I have a problem here. Please give me solution for this...
I am using Oracle 11g on my windows XP system.
I created a new user named "some"
I want to copy all the objects from scott user to some user... Please help me
If all what you are interested is Scott schema than no need to use the datapump or CTAS. Run demobld.sql in your schema and it would have all the objects of Scott.
http://www.oracle.com/technology/sample_code/tech/sql_plus/htdocs/demobld.html
HTH
Aman....

HT4527 I just had to clear the hard drive on my computer - now I want to transfer all the music and pictures from my ipad back onto my computer. 'Sync' doesn't do it. What do I do?

I had toclear the hard drive of my computer and reinstall Windows 7. Now I want to transfer all the music and photos from my iPad back onto my computer. I authorized the computer (it is the ONLY computer authorized on this account - and this is the ONLY account on this iPad). ITunes then downloaded my purchases...or at least it tried - out of the hundreds of tracks I have purchased, it managed one album that I bought over a year ago and NOTHING else. So I tried to Sync - since on older versions of iTunes (that were SO MUCH MORE user friendly) that would do the job -transferring things that were only on the iPad onto the computer and vice versa. It doesn't do that anymore. So I went from my iPad's summary to the Music tab - the box for Music was not checked but when I checked it said the only thing it could do was erase EVERYTHING from my iPad and replace it with what was on my computer (that ONE album). What is going on?
Why hasn't iTunes downloaded my other purchases since I authorized the computer? (there are over 3,000 tracks...not 18)
How can I download my iPad to my computer?

-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....

How to delete all the PSA data in one go

Hello Guys,
I want to clear all the data from all the PSA tables at one shot, how can i do this??
I have tried following things:
1) I have gone to PSA root node and right click and then clicked on delete PSA data, but its showing me all the datasources and when i am executing that, it is deleting one by one(that i means i need to select individual datasource, which i do not want).
2) Above specified step runs RSPSADEL1 in background , so i doubt whether it deletes psa data only or complete Table?
3)I got the info from other posts that there is a fm which is RSATREE_PSA_DELETE_BATCH, but i need to make myself clear whether this fm deletes only data or complete Table?
I am using sap-bw 3.5.
Regards,
Dolly

Hi,
there is one easy way to delete data from PSA .You can create a process chain have one delete data from PSA step where you need to give PSA table name and request older than (no of days before which you want to delete data ).
Execute it and it will delete all the data before specified no of days .You can add multiple PSA tables here and can delete whole data in one go .
Regards,
Jaya

I just got an iPad 2 and have not yet synced to my computer. I don't want to have all the duplicate songs in my iTunes. How do I get rid of duplicates?

I just got an iPad 2 and have not yet synced to my computer. I don't want to have all the duplicate songs in my iTunes. How do I get rid of duplicates?

You don't say whether you are on PC or Mac. For Mac there are these two programs which might help (I havn't tried either) :
http://www.apple.com/downloads/macosx/ipod_itunes/songsergeant.html
http://www.apple.com/downloads/macosx/ipod_itunes/idupe.html
There are probably similar programs for PCs, but I don't know what they are. On a PC you can hold the shift key and do File > Display Exact Duplicates (without the shift they may not be exact matches) - if one of each duplicate pair has the same date added then you can sort by that and then delete those with (or without) that date.

Convert the all the quantity units into one Unit of measure that is 'CSE'.

Hi all,
I want to convert the all the quantity units into one Unit of measure that is 'CSE'.
would anybody tell me what is the FM that converts all the quantity units into one Unit.
Thanks in advance,
Mythily

Hi Mythily,
You can check the following function module - -
FCO_CONVERT_FROM_BASE_UNIT
MD_CONVERT_MATERIAL_UNIT
MS_CONVERT_UNIT_TO_TIME
RV_CONDITION_CONVERT_UNITS
VHUMISC_CONVERT_TO_ALTERN_UNIT
VHUMISC_CONVERT_TO_BASEUNIT
WALL_QUANTITY_CONVERT_UNIT
WALL_QUANTITY_CONVERT_UNIT_RND
WSTP_CONVERT_UNIT
Regards
Pinaki

I want to remove all the components from particular panel.

hi all,
i have 3 panels p,p1,p2.i added panels p1 and p2 to a window,then i added a panel p(this panel contaning JScrollPane) to a panel p1.i have a button on panel p2,if i press that button i want to remove all the components as well ass JScrollPane(remember JScrollPane in panel p).
if possible give example.
Thanks in advance
bhaskar
code is here
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
public class test1 extends Window implements ActionListener
JPanel p,p1,p2;
JScrollPane jp;
Button b,b1,b2,b3,b4,b5,b6,b7,b8,b9,b10,b11,b12;
test1()
super(new Frame("testing"));
p=new JPanel();
p1=new JPanel();
p2=new JPanel();
adding();
jp=new JScrollPane(p);
jp.setPreferredSize(new Dimension(300,300));
add(jp);
setSize(new Dimension(200,200));
setVisible(true);
public void adding()
b12=new Button("hai");
b12.addActionListener(this);
p2.add(b12);
add(p1,BorderLayout.CENTER);
add(p2,BorderLayout.WEST);
p.setLayout(new GridLayout(11,1));
p.setBackground(Color.white);
b=new Button("one");
b1=new Button("two");
b2=new Button("three");
b3=new Button("4");
b4=new Button("5");
b5=new Button("6");
b6=new Button("7");
b7=new Button("8");
b8=new Button("9");
b9=new Button("10");
b10=new Button("11");
b11=new Button("12");
p.add(b);
p.add(b1);
p.add(b2);
p.add(b3);
p.add(b4);
p.add(b5);
p.add(b6);
p.add(b7);
p.add(b8);
p.add(b9);
p.add(b10);
p.add(b11);
p1.add(p);
public void actionPerformed(ActionEvent e)
if(e.getSource()==b12)
System.out.println(e.getSource());
System.out.println("111");
p.removeAll();
public static void main(String args[])
test1 t=new test1();
/*****************************************/

p.removeAll();

How to show regions markers in Google maps based on longitude and latitude. on-click of region marker i want to display all the country locations based on the region from share point list?

Hello every one,
In My requirement i am having some regions with longitude and latitude in one SharePoint list. in another SharePoint list i am having the country values with longitude and latitude and region as look up field. I want to display all the region
markers in Google maps. on click of any region marker i want to zoom in the map to region level and i need to display all the country markers in Google maps under the region. can any body help me on this requirement.
Thanks in advance,
Venu.

Not sure about Google Maps but this is fairly easy to do with Bing Maps. I've used Bing Maps with SharePoint lists fairly regularly. Here are some blog posts:
http://blogs.bing.com/maps/2013/03/26/connecting-a-sharepoint-list-to-bing-maps/
http://blogs.bing.com/maps/2013/03/07/geocoding-a-sharepoint-list-item/
Once you have your sharepoint list connected to Bing Maps you can easily filter the list data based on the selected country if you have a country column in your list. If you want to take things a bit further an create a much cooler user experience you can
also use the Bing Maps GeoData API to get the country boundaries and show them on the map as polygons. These could be color coded based on some metric, or set up as the clickable area on the map rather than a pushpin. Here is a blog post on how to use the
GeoData API with the JavaScript Bing Maps control:
http://blogs.bing.com/maps/2013/06/25/retrieving-boundaries-from-the-bing-spatial-data-services-preview/
http://rbrundritt.wordpress.com

I downloaded GarageBand on my ipod but I want to buy all the instruments how do I do that

I downloaded GarageBand on my ipod but I want to buy all the instruments how do I do this

All of the instruments are listed. It prompts you if you want to buy all of the instruments if you try to use one that is locked. If you bought your device after the iOS 7 release, you're fine and all of the instruments are unlocked.

Close all the open Application in one-shot ?

Is there are any way to close all the open application in one shot in ipad rather than double-click the home button and close the apps one by one.

In principle, I agree with you...
But it appears that reality is not perfect. I observed on iPhone 3 that memory could be pretty clogged from time to time and I needed to restart it to free up memory and get it back to original speed again. It all depends on which apps you are running. Some appears to eat more memory than others. On iPhone 4, it appears to be less of a problem and I have seen that later iOS releases also makes this less of a problem. I only have a first generation iPad, but I have seen that later iOS releases have improved memory handling significantly there as well. However, it appears to be a good idea to reboot the device after a week or two just to flush the memory. I can't prove this theory scientifically, but I do see a difference in memory usage when doing this.
The reason I actually tried "Process Killer" was a tip that it addressed the problems many of us encountered with the first iOS 5 release: frequent crashes and slow performance. After the pretty quickly released iOS 5 update, that wes pretty much solved, but occasionally killing processes actually helped me at that point, It made both my devices more stable.
The original question was about battery performance, there I don't think that the amount of processes running is the key. A much better way of getting more out of your battery is shutting off location services in apps where they are not really needed. I would guess that turning off push notofications for as many apps as possible helps as well.
Also, turn off the Personal Hotspot on iPhone when it's not needed!

I recently bought an ipad 2 and wanted to use all the apps on my iphone4 on my ipad but have been charged when I use my apple id. What should I have done to share the apps?

I recently bought an ipad 2 and wanted to use all the apps on my iphone4 on my ipad but have been charged for the first app I downloaded when I use the same apple id. What should I have done to share the apps and should I have been charged? 2 months ago when I got a new iphone, i was told in order to get all my apps back as I hadn't backed up my files, if I used the same apple id I would 'purchase' the app, but then would not be charged as apple would recognise that I have already purchased the app. That worked, but when I did the same thing on my ipad 2 using the same apple Id, I was charged... what should I have done and is this right as I thought the whole point of having multiple apple devices was I could share apps between devices. please help! thanks.

Using the same Apple id and Password you should be able to download purchased apps without being charged again.
I download to an iPad/iPad2/iPhone3 & iPhone4 with no problem.

Want to initiate all the LEDS one by one in VI

Similar Messages

Maybe you are looking for