Warning message at the time of GR for a material with Batch Management

Dear All,
   I am new to MM,
     We are using batch at plant level. For some materials user dont want maintain
     Batch classification in Material Master. At the time of Goods Receipt posting with ref-to PO user getting warning message like <b>For batch 0000000139 of material 212030602400000 4F10, no class could</b>. I check system messages setting transaction code OCHS for batch management, but I didnt found this type of message in the list.
Plzz can any one help me where I need to change system settings?
Thanks in advance.
Meeravali shaik.

HI,
Check in the IMG node Logistics general > Batch Management > Define attributes of system messages.
Regards,
RitiG

Similar Messages

Create warning message at the time of order creation

I am looking for a solution :- "Create warning message at the time of order creation/save if a cc is assigned in the settlement rule that crosses the company code of the order or where the company code of the plant for the order is different from the company code assigned to the cc"

The txn code : IW32 (maintenance order) , this warning message for settlement rule creation using Cost center as a settlement receiver. If the used cost center is belongs to some other company code, said warning message should occure.
I tried user exit, field exit, also used std message control (KO-458). Nothing is working.

How to create a batch for a material, with batch characteristic input?

I am currently using BAPI_BATCH_CREATE to create batch for materials in my program. However, I find no way to input the batch characteristics. Is there any existing function module responsible for that? Thanks!

Hi,
You can use FMs 'CLVF_INSERT_AUSP' or 'CLVF_INSERT_AUSP' to insert or update characteristics for materials.
In the structure INS_AUSP or UPD_AUSP -
OBJEK corresponds to the material number,
ATINN is the characteristic name,
KLART is the class type which is '001' for materials, and
ATWRT is the characteristic value.
Populate values into the above fields for the batch of materials and call this FM.
Reward points if found useful...!
Cheers
Abhishek

BAPI_GOODSMVT_CREATE, will do the goods receipt ( MB01 )for the subcontracting PO with batch management.

Dear Professionals ,
I Just want to confirm that whether BAPI "BAPI_GOODSMVT_CREATE " will do the goods receipt ( MB01 ) for the subcontracting PO with batch management.
Since I will be passing only 101 mvy type in BAPi, will the system automatically call 543 mvt type with batch management and post the consumption.
can I change the batch of the component items ?

Hi ,
Delivery note is like a ref document number
so you can use the
In the BAPI_GOODSMVT_CREATE There is header structure BAPI2017_GM_HEAD_01 which has a field REF_DOC_NO
you can pass the delivery note value to that field .
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jul 10, 2008 3:41 PM

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

HT1848 i Authorize my apple 4s in to my computer,but my phone non syncing to my computer, the warning message is , the phon colld not synced because this computer is no longer autherise for purchased item that are on this iPhone., wat i do??

I Authorize my apple 4s in to my computer,but my phone non syncing to my computer, the warning message is , the phon colld not synced because this computer is no longer autherise for purchased item that are on this iPhone., wat i do??

Well Authorize the Computer...........

Warning Messages to the log

Hi Experts,
I want to send a warning message to the order log , for this I used
CALL FUNCTION 'CRM_MESSAGE_COLLECT'
        EXPORTING
          iv_caller_name = 'ORDER'
          iv_ref_object = iv_guid
          iv_msgno       = 002
          iv_msgid       = 'ZMSG'
          iv_msgty       = 'W'
          iv_cumulate    = 'X'
        EXCEPTIONS
          not_found      = 1
          appl_log_error = 2
          OTHERS         = 3.
MESSAGE ID 'ZMSG' TYPE 'W' NUMBER '002' .
But the problem is order is not saving at all, I want order to be saved and the warning message to be in the log.
Please help me out in this.
Thanks in Advance,
Praveen

I am using it in the BADI_ORDER_SAVE, when I do not add this message to the log the pop up message is coming out fine.
In this FM if I send E to iv_msgty ,its working fine too.The problem is coming only for warning messages.
Your time in replying to this thread will be appreciated.
Thanks in Advnace,
Praveen

I tunes won't open. No warning message, just the first terms agreement opens and when i agree itunes stopes running. I just wiped and reinstalled everything including windows. I updated everything fully. Deleted spybot unintalled and reintalled new

I tunes won't open. No warning message, just the first terms agreement opens and when i agree itunes stopes running. I just wiped and reinstalled everything including windows. I updated everything fully. Deleted spybot unintalled and reintalled the newest and one older version of itunes. still nothing. I tried to delete some files that is hidden as directed by apple. I have been trading emails with customer support but it has been no help at all. I am running Windows XP. Before i wiped my computer I ran itunes with no problem, on this computer, this week.

WOOOOOOOOOOOO!!!! JUST WANTED TO UPDATE Y'ALL THAT BY SOME STROKE OF HEAVENLY GLORY, ITUNES DECIDED TO WORK AGAIN!!!
WOOOOOOOOOOOOOO!!!
How did I do it you ask??
after all the stuff I updated you about, I tried one last time to install....still didn't work...so once again I wiped my system of everything itunes and apple related
well today I was trying to watch a video that required me to get the quicktime plug in, and it too me to a page that was a quicktime install + itunes 7.blah blah blah instead of the other way around
well, don't ask me why, but low and behold
IT WORKS!!!!
I HAVE MY ITUNES BACK!!! (JUMPS FOR JOY)
Just wanted to share my shear elation

How do I enable the low ink warning message on the HP 7520 e all in one printer

How do I enable the low ink warning message on the HP 7520 e all in one printer? Or is it even available on this model?
This question was solved.
View Solution.

ccardwell,
Welcome to the HP Forum.
The following Assumes a Recent Windows Operating System is installed on your computer...
The Photosmart 7520 allows you select when you would like to receive Ink Alerts:
Right Away -- as soon as there is a need for attention
Only when you initiate a print job
The Full Feature Software installation procedure places the Printer Assistant shortcut on the Desktop.
Install Full Feature Software – Photosmart 7520
Open the Printer Assistant shortcut > tap on the Estimated Ink Levels icon (along the top ribbon) >
Toolbox opens > Select tab Advanced Settings >
Under Show Alerts > CHECK desired setting
Click Close
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

System message at the time of login & need post installation

Hallo Everybody
I just install the SAP IDES ECC 5.0 (SQL database), I also running some transaction, but from 2 days i receive the message at the time of logging
System message
Validity of certificate from list with PSE type >system PSE < ends in 1 day. for more information see the SAP system log (transaction SM21)
but i also check the tran. SM21 but i can't find something that indicate what exact erroe and dignosis.
So please suggest me the solution.
Also what tran. are need to run (Post installation) after the installation. beacause i install IDES on standalone machine (Require Post installation proc.)
System Desc.
SID=ERP
instance no=00
host=sapsrv
database SQL 2005

check these links for the PSE error:
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/fb993af7700577e10000000a11402f/frameset.htm
PSE certification validity end
post-processing steps are in the installation guide.

How to load a warning message in the sub_VI in a true 'case' statement.

I wrote a sub virtual instrument (sub_VI) containg a case structure in which a warning message is supposed to be shown only when a case is true, and this works fine by itself alone. However, when I put this sub_VI in the main VI program, the warning message doesn't come up even when the case under sub_VI is true. Is there any way to show this warning message even with the sub_VI under the main VI ?

By default, sub VI's do not open their front panel when run. If you are putting your warning message on the front panel, then the message will appear when the VI is run on its own (as the main VI) but not when it is run as a sub VI.
If you use one of the dialog functions such as the "One Button Dialog" fromt the "Time and Dialog" menu, then the message will appear even if used in a sub VI.
The other option is to right click on your sub VI and set it's properties to open when run and close again afterwards.
Rob

Note messages at the time of availability check in sales order entry form

Hello Friends,
Im getting the following note messages at the time of availability check in the sales order entry form.
ATP Process resulted in no data
User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_rec
User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_tbl
After this when we book the order, the order line status becomes 'Booked' and does not change to 'Awaiting Shipping'
As a result of which im not able to proceed ahead with the rest of the order to cash cycle.
Can somebody please guide me in resolving this error.
We don't intend to use ATP as the client's business process is such that they maintain adequate inventory balances.
Regards
Anil Wadhwa

Hi Anil
Are you using a RAC DB configuration? Please check if this is true, there are special setup steps that are required to be performed in case of RAC DB configuration and this issue usually occurs if such configuration is missing specifically if its happening randomly for some ATP requests.
You can find actual steps to be performed on metalink.
Thanks
Navneet Goel

Warning message on the portal

Hi,
We are able to get error message on the cProjects portal using the method MESSAGE_ADD of class CL_RPM_MESSAGE_SERVICES by passing type E. But when i try to pass type W or I for warning or information message it does not show up on the portal. How do we display a warning message on the cProjects portal.
Regards,
Simmi

the warning message worked in another method

Show Warning Message near the field

Hi all,
I want to show my warning message near the field which is required instead of right at the bottom.
I use the following onSubmit() Method when the user hits the submit button to check for required fields:-
if (this.testfield == null) {
this.setBackgroundColor(componentId : "testfield", color : "Red");
this.focus(componentId : "testfield");
this.setVisible(componentId : "testfield", visible : true, collapsed : false);
this.showWarning(warning : "Testfield is Required");
else {
this.submit(text : "submit");
This gives me the error message right at the bottom of the presentation as opposed below the field.
How can I get this message to appear right below the field which is required?
Any idea?
I tried this.setText()
But it does not work.

The "showWarning" and "showError" methods used to be more useful when we had the option in earlier releases (5.7) to place them at either the top or the bottom of the presentation.
I now never use either one of them.
This is not what you want to hear and know you've thought of this, but what I do is add text attributes (errorMessage1, errorMessage2,...) to the BPM object and then place the text fields on the presentation as read-only, bold red foreground color text fields directly above the field causing the error. In my presentation's initialization method, I always use the setVisible method to false and collapse them. In your submit logic, you'd set the value of the error message attribute and set the error message field to be visible and not collapsed. You need to add an on change event for the field causing the error that will make the error field not visible and collapsed. Similarly, if you have a Save button, you need to make all the error fields not visible and collapsed.
Dan

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

Warning message at the time of GR for a material with Batch Management

Similar Messages

Maybe you are looking for