Warning to error message not reflecting for message no06219

Sir,
ply help me for the message no "06219" which is used for po
purpose system should not take price from last po if validity expires.
this message is not reflecting
regards
amey

from OSS Note 675523 - Conditions are copied from Last Purchase Order:
Use the user parameter EVO to indicate that no price adoption from last Purchase Order must take place:
IMG: MM -> Purchasing -> Environment data -> Default values for Buyers
-> Setting for Default values.
Select or setup a default value and on the "price adoption" tab you may choose how copying of conditions from last purchase order must behave. Select "Do not copy".
Then assign this default value to the user, using the EVO parameter.

Similar Messages

User not authorized for message processing

Hi,
I have a SM59 connection from SAP PI --> SAP R3.
Targethost sapr3T.mydomain.
Path prefix: /sap/xi/engine?type=entry
Process: From PI send a message to R3 (scenarie is a Server Proxy...)
User: PIPROXY has Role SAP_XI_APPL_SERV_USER
This is not enought I get error "User not authorized for message processing" when trying the connection from my PI server. (I tried with SAP_ALL and then it works)
What would be the right user role for this operation ?
Br,
Martin

Hi all,
I have the same problem in a XI -> BW scenario (Abap proxy).
I get error "User not authorized for message processing" when try to send message from PI to BW.
(I tried with SAP_ALL and then it works)
User: PI1REMOTE has Role SAP_XI_APPL_SERV_USER and SAP_XI_IS_SERV_USER
What would be the right user role for this operation ?
Thanks
Daniele

Object type not maintained for message type

Hi,
I am working on chnage pointers for Vendor classification data. when I execute the program RBDMIDOC (BD21) I get the error Object type LIFNR not maintained for Message type.
If anyone has worked on change pointers, please guide me in solving this error.
Thanks
Hari

Hi
Which msg type u r using there.
Regads,
Prasad.

Custom segment does not exist for message type Debmas_cfs

Hi,
I have created a custom segment YEXTRA for basic type DEBMAS06.
I have done the configuration in We82 and We20.
I have implemented the segment in User Exit "EXIT_SAPLVV01_001". Now when I am executing the TCODE BD12 then it is creating the Idoc with custom segment. But when I apply the filter on sales org in BD64 then it starts giving me error that " Segment Y**** does not exist for message type DEBMAS_CFS.
Kindly suggest if I need to do some other configuration also.
Thanks.
Regards,
SAurabh

Hi Gearge,
To add custom segments, you should create an extension.
the TCODE is we30.
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

My iphone 4 does not ring for messages when i use the handsfree..

my iphone 4 does not ring for messages when i use the handsfree..

iPhone supports A2DP audio streaming. If you have it paired to a handsfree kit that supports this, for example, an in car audio system, and are currently tuned to a source other than the phone, the phone will send the audio for things like text message alerts to the handsfree system, but you will not hear them. This is just the nature of the beast. If you do not intend to use audio streaming from the phone, you may be able to disable this in the in car system. This should not affect Bluetooth calling. There is no option to disable this on the phone itself.

- 0 fatal error(s), 3 error(s) ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 ----------- ERROR: Key not valid for use in specified state. ERROR: Install MSI payload failed with error: 1603 - Fatal error durin

I keep getting this error code when trying to download
- 0 fatal error(s), 3 error(s) ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 ----------- ERROR: Key not valid for use in specified state. ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Key not valid for use in specified state. ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Generally this error happens because of an encrypted folder or insufficient permissions on that folder: http://support.microsoft.com/kb/834484 (MS Explanation)
Adobe has a page here: Error 1603: A fatal error occurred during installation

How to deleted warning this accessory is not optimized for this iPhone

How to deleted warning "this accessory is not optimized for this phone"

You cannot delete it, it is a valid message.
The issue may be that the dock connector has dust/lint in it or the pins are bent. Try cleaing the connector with a soft dry brush.
This assumes that the "accessory" that is generating the message is optimized for iPhone.

Pending Move Transaction ****Error: Status not applicable for this Locator.

Hi guys,
Let me know if you have experienced the following error in the pending move tranasctions with Back flush process?
Message error:
Status not applicable for this Locator.
Transaction processor error
Thanks,

the receiving with locator works only if there is a valid default locator defined in the system.
There is no option to enter the Locator manually in the receiving pages of iProcurement.
Locator and/or serial controlled Items must be received in the Core PO Receipt Form and not in iProcurement.
Cannot Receive Requisitions For Inventory Items Which Are Locator And/Or Serial Controlled (Doc ID 809408.1)
Also refer to the below,
Unable To Receive Inventory Item In iProcurement or Core Apps Receiving Due To Locator Error (Doc ID 819083.1)

WARNING: DW065: Display requirements not met for {7D4E9D10-AED6-485D-A2B0-9A1DF1A55545} Adobe Illust

Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ... WARNING: DW065 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 5 error(s), 1 warning(s)
WARNING: DW065: Display requirements not met for {7D4E9D10-AED6-485D-A2B0-9A1DF1A55545} Adobe Illustrator CS6 Core 16.0.0.0
----------- Payload: {97BA0109-F6BE-4F50-8904-C19442D7216E} Adobe Bridge CS6 5.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\Bridge CS6 Extensions\Adobe Output Module\mediagallery\resources\flashgallery\AUTORUN.inf" Error 5 Access is denied.(Seq 237)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 237)
ERROR: DR011: Deleting Registry Key - failure. E(Seq 69)
ERROR: DR011: Deleting Registry Key - failure. E(Seq 66)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Bridge CS6: Install failed

Nobody can help you without proper system info. If it throws a "display requirements not met" then it probably means what it says - your screen is too small.
Mylenium

Install error- key not valid for use in specified state

after downloading and starting installation I keep getting the error "key not valid for use in specified state"
I am using an administrator account and have selected to run the install application as an administrator.
What is causing this?

Generally this error happens because of an encrypted folder or insufficient permissions on that folder: http://support.microsoft.com/kb/834484 (MS Explanation)
Adobe has a page here: Error 1603: A fatal error occurred during installation

Error: "can not scan for wireless networks" 1st gen iphone running 3.1.2

My iphone will no longer scan for wireless networks. I am running an airport network via my imac and the rest of the computers, as well as two iphone 3GS phones can see it, but my 1st Gen iphone now gives me the error "can not scan for wireless networks". I have done the Home + Power button thing, reset the network settings and no help yet.
Any suggestions?

OK. There are reports of bad wifi chips, but lets try some more things first.
I assume your router is set to b/g compatible & not "n" only, correct? The iphone only works on g. Next, try this: Shut down the WiFi, and turn off "Ask to Join Networks". Then turn the iPhone completely off, by holding the top button down until the red slider came up, slid it off, and wait a few moments.
Turn the phone back on, then turn on the WiFi, and then "Ask to Join Networks".
See if that helps.

Messages not reflecting in PI system.

When sending a message from R/3 system using proxies I was able to see the messages in SXI_MONITOR of R/3 system.
While debugging, message is getting transferred into the XI structure.
But, the same message is not reflecting in the PI system when searching using SXI_MONITOR.

Hi,
Can you please answer me:
1) Are uy able to see any entry in SXMB_MONI of XI and any error message.
2) Have u used the commit work at the end of the report.
3) Have u created the RFC destination in XI
SAPSLDAPI
The RFC destination SAPSLDAPI is required for the connection to the SLD. It is used by the ABAP API.
4) Have u checked the Transaction SLDCHECK in XI.
5) Have u checked Transaction SPROXY
The interfaces are taken from the Integration Repository of the connected XI
system. To make sure that this connection is running correctly, use the test
reports provided in transaction SPROXY &#56256;&#56518; Goto &#56256;&#56518; Connection Test:
o Report SPROX_CHECK_IFR_ADDRESS checks if the connection to the
Exchange Profile is running and if the parameters are set.
o Report SPROX_CHECK_HTTP_COMMUNICATION checks if the HTTP
communication of the system is running.
o Report SPROX_CHECK_IFR_RESPONSE checks it the connection to the
Integration Builder is running correctly.
o Report SPROX_CHECK_IFR_CONNECTION checks if the data coming from
the Integration Builder can be correctly interpreted.
Thnx
Chirag

Warning: MDB application is NOT connected to messaging system on console

An application works on weblogic 8.4 recently upgraded to weblogic 10.3 with Foriegn JMS server configuration.
<foreign-server name="Fax JMSServer">
<notes>The Foreign JMS Server Confirm uses to talk to Fax</notes>
<default-targeting-enabled>false</default-targeting-enabled>
<foreign-destination name="FaxReplyQueue">
<local-jndi-name>com.foo.jms.FaxReplyQueue</local-jndi-name>
<remote-jndi-name>com.foo.mq.FaxReplyQueue</remote-jndi-name>
</foreign-destination>
<foreign-destination name="FaxRequestQueue">
<local-jndi-name>com.foo.jms.FaxRequestQueue</local-jndi-name>
<remote-jndi-name>com.foo.mq.FaxRequestQueue</remote-jndi-name>
</foreign-destination>
<foreign-connection-factory name="mq-jms-ConnectionFactory">
<local-jndi-name>com.foo.jms.FaxConnectionFactory</local-jndi-name>
<remote-jndi-name>com.foo.mq.FaxConnectionFactory</remote-jndi-name>
</foreign-connection-factory>
<initial-context-factory>com.sun.jndi.fscontext.RefFSContextFactory</initial-context-factory>
<connection-url>file:/C:/bea/mqJNDI</connection-url>
</foreign-server>
Upon deployment, an warning message "MDB application is NOT connected to messaging system" occurs on the weblogic 10 console for one of the MDBs. In log file you can find the following message:
<Oct 27, 2009 4:35:15 PM EDT> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: FaxNotificationBean is unable to connect to the JMS destination: com.foo.jms.FaxReplyQueue. The Error was:
Can not get distribute destination information. The destination JNDI name is com.foo.jms.FaxReplyQueue, the provider URL is null>
The following is the annotations of the MDB in workshop.
@ForeignJmsProvider(connectionFactoryJndiName = "com.foo.jms.FaxConnectionFactory")
@JndiName(remote = "com.foo.faxmgr.ejb.FaxNotificationBean")
@MessageDriven(defaultTransaction = MessageDriven.DefaultTransaction.NOT_SUPPORTED,
     destinationJndiName = "com.foo.jms.FaxReplyQueue",
ejbName = "FaxNotificationBean",
durable = Constants.Bool.FALSE,
transTimeoutSeconds = "0",
     destinationType = "javax.jms.Queue",
     initialBeansInFreePool = "1",
     maxBeansInFreePool = "10"
I googled and found the same questions asked before but no working answers. Does anybody know what's wrong with my MDB? BTW, it works the same way in weblogic 8.4 platform.
I even tried to add resource refs as below but the same warning message is still there. TIA.
@ResourceRefs(
     {@ResourceRef(name="com.foo.jms.FaxConnectionFactory",
     jndiName="com.foo.jms.FaxConnectionFactory", type="javax.jms.QueueConnectionFactory",
     auth=ResourceRef.Auth.CONTAINER, sharingScope=ResourceRef.SharingScope.UNSHAREABLE),
     @ResourceRef(name="com.foo.jms.FaxConnectionFactory",
          jndiName="com.foo.jms.FaxConnectionFactory", type="javax.jms.QueueConnectionFactory",
          auth=ResourceRef.Auth.CONTAINER, sharingScope=ResourceRef.SharingScope.UNSHAREABLE)}
)

Hi,
We have had this same issue and the problem was diagnosed as a Oracle listener.ora issue with the OIM database connection not beining configured to use it's 1522 connection but using the default 1521 so it was just sat there not knowing that it's port should be 1522.
Regards,
Simon

Share tool not working for Messages

When I attempt to use the Share tool for a photo in my camera roll, and I select the Messages option, first the message input screen delays for a few seconds. Then after the delay unfreezes and I'm able to type or tap Send, it seems like no message is sent. Because when I check the conversation chain back in the Messages app there is no message for the photo I attempted to share. This isn't supposed to be the case right? I should see the shared photo as part of my Messages history, right? I noticed this problem started occuring last week. I don't recall exactly when I updated to iOS 7.1.1 or if there was any problem immediately after updating.

Thanks... and then for the suggestion to sign out and sign back in. I've already done that though (see #3 in my original post... that's what it meant). And I've already sent a link to the person with the other phone, suggesting she do that too. Also thanks for the point on the MacBook not being able to send SMS. Good point.
That said, yep... I'm sure I'm not trying to send an SMS. Even so, that would at least go in green... right? But we cannot send either SMS or iMessage from this end. When I open a new Message... and type in the contact name... it goes red. Just red. As though it's already unreachable. Even though it's the right number and the right email address. I would at least expect that it would, if she weren't registered to iMessage, be deliverable as an SMS (green)... but no.
Here's the process, if it helps:
I open a new message and type in the address -- it goes red (already a sign of trouble).
Then I try to type in a message anyway. It goes green.
Then I hit send and get back a "Not Delivered" error.
Same on her end.
Now, here's something interesting.... I'm typing to you now on a different machine, running under a different administrator (me) and I've just tried to send a message to the same two recipients. One, my mother-in-law's, works just fine. The other, my sister-in-law's ALSO goes red on my machine.
Hmm.
Question: You say "I would suggest you both go to Settings > Messages > Send & Receive, sign out and sign back in. Also make sure that the addresses that you are trying to reach each other at are listed there."
By this, I'm assuming you only mean that each person's sending and reachable addresses are listed in the settings, right?
I guess it's possible she never set that up (on the other end) but she says she can text fine with everyone except her mom.
On the other hand, why would her email address go red in my new Message window too?

Warning to error message not reflecting for message no06219

Similar Messages

Maybe you are looking for