WARNING: Unable to connect to URL: in oracle b2b adaptor

Hi
I am facing the following error while configuring the b2b in jdev
WARNING: Unable to connect to URL: http://localhost:7001/integration/services/b2b/B2BMetadataWSPort due to javax.xml.soap.SOAPException: Message send failed: emeacache.uk.oracle.com

Hi,
Check whether admin server is up and running.
Regards,
Anuj

Similar Messages

Unable to connect SQL State=S1000 [Oracle][ODBC][Ora]ORA-12170:

Hi all,
I have an Windows XP OS with SP3.
I have installed the Oracle 11g server.
On trying to connect to the ODBC connection, i get the following error message:
Unable to connect SQL State=S1000 [Oracle][ODBC][Ora]ORA-12170: TNS: Connect timeout occured
On trying the tnsping,
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 09-OCT-2
011 13:11:05
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
E:\app\Gautam\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.
5.207)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl))
TNS-12535: TNS:operation timed out
On trying to connect with SQL Developer, i get the following error:
Status: Failure - Test failed: Io Exception: The Network Adapter could not establish the connection
However i am able to connect to the same using SQL Plus
Another issue that occurs is that the Oracle Enterprise Manager shows the following error after a while:
Agent Connection to Instance
Status Failed
Details ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
The following services are all up during this point of time:
OracleDBConsoleorcl
OracleOraDb11g_home1TNSListener
OracleServiceORCL
Any help in this regard will be very useful as this is hindering the progress of my work.
Thanks in advance for the help.
- Gautam

841683 wrote:
Hi,
I did try and delete my listener.ora and then create a new one..
That did not solve my issue..
What are the steps for configuring the listener again.
Thanks for the response..
- Gautamno listener.ora file is required.
just do as below
lsnrctl start

Unable to connect using sqlplus using Oracle 11.2.0.1 32bit(x86) client

I have database running on Oracle 11.2.0.3 on Linux 5.5 64bit. Another server where I have installed Oracle Client 11.2.0.1 32-bit (x86). (http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-linuxsoft-085393.html).
But I can not do tnsping, I get segementation fault. Additionally, I can not to database using sqlplus <user>@SID. I get prompted for the password, then I am back the unix prompt again without any error.
For debugging, I installed 64bit version of the client, which can connect to database. I am using same version/copy of tnsnames.ora. No special character (^M) in the tnsnames.ora.
Any suggestions how do I get this fixed?
Thanks,
KP

I figure I should update my findings on the resolution.
during Oracle 11.2.0.1 client installation, there was an error/warning message about oracle net configuration assistant unable to run. So, I had ignore it thinking its benign and created the tnsnames.ora file manually. On a hunch after 9 days of debugging, i decided to look into this warning message, and found some info in the ora32Inventory/logs/installAction-<date>.log. It had following error about java when running oracle net config.
INFO: # Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
INFO: # Problematic frame:
INFO: # C [libnnz11.so+0x3c35e]
So, I google the error, and after some research and reading, found an oracle patch to address this error:
ORA-24550: SQL*Plus 32-Bit Client May Crash On Linux X86-64 OS With AMD Processor [ID 1120724.1]
Patch info: 8670579 - DBBETA :NETCA/DBCA FAILED WITH HOTSPOT VIRTUAL MACHINE
Typically, this patch (8670579) is installed on Oracle RAC. however I tried on my app server (oracle client). It resolved my sqlplus issue and more importantly it resolve my application (Business Objects/BSAE) installation issue where it was unable to connect to oracle database using 11.2.0.1 client.
Cheers,
KP

Test Database Connection "Unable to connect to DB" using Oracle 10g Express

DB is up and running fine pls help
Connection test failed.
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:280)
oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:482)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:156)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:101)
com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:745)
com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
...

After installing the JDBC driver and selecting the test configuration i am getting the below erro:
Connection test failed.
Message icon - Error Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:280)
oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:482)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:156)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:101)
com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:745)
com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
The Steps i followed to install the JDBC Driver are mentioned below:
1. JDBC Data Source Properties:
Name: testSample
JNDI Name: abc.xyz.testSample
Database Type: Oracle
Database Driver: Oracle’s (Thin XA) for Instance
connections; Versions: ... 11
Database Name: orcl
Host Name: wls-sysadm
Port: 1521
Database User Name: weblogic
Password and Confirm Password: Welcome1
Before that i started the database from start menu
and both the services
ORACLE service XE
and ORACLELISTNERSERVICE is up and running fine.
C:\Users\satish>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-JUN-2013 10:18
:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 04-JUN-2013 09:35:25
Uptime 0 days 0 hr. 43 min. 26 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SATISH-PC)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Can anyone pls help...urgent

Unable to connect to sybase in Oracle Golden Gate using GGSCI cmd prompt

Hi All,
I am trying to connect to sybase using golden gate cmd prompt GGSCI, but i am getting below error
Command - dblogin sourcedb master userid sa
master is the dbname (Default available in sybase)
sa - user
ERROR: Cannot connect to database master at server BL1DDG1W4BS.
Client Library error: severity(0) number (44) origin(1) layer(4).
ct_connect(): protocol specific layer: external error: The attempt to connect to
the server failed.
Sybase Version - 15.0
Oracle Golden Gate version - Oracle Golden Gate for Non Oracle Database Release 10.4 for sybase 15.0.
Please if any one can help me out.
Thanks In Advance.
Regards,
Prachi

the command is
dblogin sourcedb <DNS_NAME> etc...
DNS_NAME is the name of the ODBC connection to your sybase server.

Unable to connect to Planning URL after new instal & configuration 11.1.2

I have installed 11.1.2 on Windows 64 bit environment and configured.
Here is my environment:
Box 1. FS, Essbase, Weblogic, Oracle HTTP. Configured successfully and working great no issues (I have not configured web server in FS yet)
Box 2. Planning. Installation and configuration was successful.
Issue: however unable to connect to URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I am not expecting 19000 will connect)
Trobleshooting:
Upon running netstat, 8300 is not running on this box.
Also configured "Manage Planning Cluster" with no luck.
Weblogic (11g) server indicated planning state is unknown.
Diagnostic indicates: 1. system-jazn-data.xml file does not exist 2. web app for planning failed due to Error: java.net.ConnectException: Connection refused: connect
I have stopped and restarted Planning app service several time runs without any issue but unable to connect to URL and no port is running.
Planning log does not reveal any error messages.
EPM system log indicates ServletContainerAdapter manager not initialized correctly
There is no error in start-HyS9Planning-out.log.
start-HyS9Planning-error.log indicates The requested service has already been started.
There is an error in validation log:
[2010-10-06T10:18:23.171-04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle.EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU^MG1Cf8KW00000E,0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] Error checking response code: [[
java.lang.Exception: java.net.ConnectException: Connection refused: connect
     at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
     at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
     at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
     at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
     at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
     at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
     at org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
     at org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
     at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
     at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
     at org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
     at org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
     at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
     at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
     at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
     at com.hyperion.cis.validation.RunningEnviroment.access$000(RunningEnviroment.java:40)
     at com.hyperion.cis.validation.RunningEnviroment$1.run(RunningEnviroment.java:132)
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:394)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:529)
     at sun.net.www.http.HttpClient.<init>(HttpClient.java:233)
     at sun.net.www.http.HttpClient.New(HttpClient.java:306)
     at sun.net.www.http.HttpClient.New(HttpClient.java:323)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:852)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:793)
     at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:718)
     at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
     ... 21 more
What am I not doing?
Thanks for your help in advance!
Edited by: VenuRamini on Oct 6, 2010 7:25 AM
Edited by: VenuRamini on Oct 6, 2010 7:35 AM

John, thanks for quick response!
I have restarted Planning and looked at the log file.
HyS9Planning-sysout.log indicated
<Oct 6, 2010 11:58:59 AM EDT> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xxxxxxxxxxxxxxx= from the file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning1\security\boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning1\security\boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Prior to this after reading epm_1112000_readme.pdf file on page 9 (issue 9180347, 8841004) there is known issue of not copying the file to destination location. Followed instruction and that did indicate that userid and pwd was not encrypted.
Here is the log when I change boot.properities files base on known issue stated above:
<Oct 6, 2010 12:34:56 PM EDT> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Oct 6, 2010 12:34:56 PM EDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User admin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User admin denied
     at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
     at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
     at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     Truncated. see log file for complete stacktrace
>
<Oct 6, 2010 12:34:56 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Oct 6, 2010 12:34:56 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Oct 6, 2010 12:34:56 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
HyS9Planning-syserr.log has no info.
Edited by: VenuRamini on Oct 6, 2010 9:51 AM

Java Connection Pooling issue with Oracle 10g Express Edition

Hello
I have a Java based web application that uses the Oracle 10g Express Edition database. I am using a connection pool to get connections to the database.
I use the NetBeans IDE and run my web application on the bundled Tomcat server(5.5.7) that comes with the IDE. Though when I initially run the application from the IDE, the connection pool is set up fine, when I recompile my java code and try to run the application again, I get the following error each time:
Listener refused the connection with the following error:
ORA-12516, TNS:listener could not find available handler with the
matching protocol stack.
The logs before the error shows up, indicate that the connection pool object is fine and gives me the number of available connections and the number of active connections and so on, which I have printed from the constructor of the Connection Pool class:
For e.g.:
Cache size = 17
Available Connections = 17
Cache Limit = 1000
Active size = 0
However, if I kill my Tomcat server process and run the application again, it works fine with no error.
I looked around for possible causes and solutions and all I could find
was increasing the processes parameter value in the init.ora file. I have increased the parameter value to from 100 to 20000 now, in increments of 500/1000 each time but it hasnt worked so far.
Someone else suggested that I increase the size of my connection pool; I initially had it set to a minimum limit of 5, an initial limit of 10 and a maximum limit of 1000. However if I set the Initial Limit to anything above 17 connections, I see the following log on the Bundled Tomcat log and my application doesn't run at all:
Log: Loading JDBC Driver : class=oracle.jdbc.driver.OracleDriver ...
Log: Loaded JDBC Driver
Log: Connection with URL=jdbc:oracle:thin:@localhost:1521:xe as username/password
Error code not handled : 0
Exception Message :java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS: no appropriate service handler found
The Connection descriptor used by the client was:
localhost:1521:xe
// End of log
And the Bundled Tomcat server automatically shuts down.
Again the System.out statements from the Connection Pool class constructor show that the cache has been initialized and that currently there are free connections available in the pool.
E.g.
Cache size = 18
Available Connections = 18
Cache Limit = 1000
Active size = 0
Has anyone faced anything similar? Could someone please suggest what I'm doing wrong here and what I should do to set right this problem?
Swetha

hello, please pardon me, my english is basic. i do of my best. i had the same problem until reading the pdf documentation 2 days for java devvelloper.it is simple, follow this way.
try {OracleDataSource ds;
Connection conn;
ds = new OracleDataSource();
ds.setURL("jdbc:oracle:thin:@localhost");
conn = ds.getConnection("userid","password");
Statement stmt = conn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
don't forget to Dowload the user client of oracle Express Edition. do the rest of your program and it will work. take a look to the documentation pdf for java develloper. all it is explained. good look

Installing SBO 2007 Error Unable to connect to database

Trying to install SBO 2007.
First install server tools, then sever.
The SBO -Common database exists as per checking the SQl database.
The install asked for the database server, database name, user name and password in which I enter this correctly.
A message states:
WARNING
'Unable to connect to database;verify database server name and that database is started'.
I am unable to proceed further. Can any on assit please.
Have also tried un installing SBO 2007, deleting databases and rebooting - without success.

Dear Lisa,
You will get this issue when you are using named/non-default instance of MS SQL Server during the installation progress
of SAP Business One Integration Platform.
The B1iP installation program uses default port (1433) to connect MS SQL
Server and to create database. The named instance will use the port
other than 1433.
1. Before the installation of B1iP, change the port of the named
    instance to 1433, which will be used to install B1iP.
2. If 1433 is being used by another application, and cannot be changed,
    the steps below is one walk-around way:
    a) Stop the instance of MS SQL Server, which is using the port 1433
    b) Change the named instance, which will be used to install B1iP, to
       1433 temporary, and remember the port to recover
    c) Install B1iP (or SAP Business One with B1iP component)
    d) After installation, stop the B1i service. Under B1i folder, in
       the Xcellerator.cfg, change 1433 to the port that B1iP DB
       instance used.
    e) Change back the ports of SQL Server.
    f) Run the service of SQL Server and B1i again.
Regards,
Rakesh Pati
SAP Business One Forum Team

Connecting form 6i to oracle database 10G express edition

I am unable to connect forms 6i to oracle database 10G express edition.
form builder closes without any message.

Hi, i was try that solution, but have some problem.
1) I have stopped other database (Oracle 8i, OracleService + Listener), none Oracle service was running.
2) I was install Oracle XE Univ.
3) Run sqlplus from XE
"D:\oraclexe\app\oracle\product\10.2.0\server\BIN>sqlplus system/PASSWORD@xe as sysdba"
4) Shutdown immediate - OK
5) Startup mount - failed
SQL> startup mount
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
6) I was check registry "hkey_local_machine\software\oracle" and delete key "local" (walue was set to connection to 8i database).
7) I was checking status of Listener from XE (after shutdown).
"Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jacek)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully"
Have anyone suggestion how to connect "directly" to XE (without @CONNECTION string) ?
If source of problem can be having DB 8i installed on same machine ?
BBye.

Warning System spameater Unable to connect to Cisco Web Security Service.; URL Filter...

My C670 ESA's have been throwing these alerts intermittently for the past few days, anyone else seeing them?
The Warning message is:
Unable to connect to Cisco Web Security Service.
URL Filtering will not work correctly.
Please verify all network, proxy and firewall settings.
Connection to "v2.sds.cisco.com" failed.
The last error seen on this connection: "Request failed with code: 28 (Connection time-out)"
Version: 8.5.6-092
Looks like it is open on port 443 and currently up. Hitting it with a browser gives me:
https://v2.sds.cisco.com/
After an error or two they go away and appear OK.
Checking the logs I don't see a way to verify URL lookups are working, is there a way?
Also, I setup URL filtering six months ago and had it set to only trigger on (-10)-(-9.5) and saw about an 80% false positive. It has improved over the past six months drastically but still catching mostly advertising URLs and allowing all phishing URLs right through. I've yet to see it block a phishing URL.
Jason

After lots of trial and error, I was able to eliminate this problem. What I wound up doing is defining the XE service again in the listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = XE)
      (ORACLE_HOME = C:\ProgramData\oraclexe\app\oracle\product\11.2.0\server)
I know that typically you should not have to do this, especially since I already had defined DEFAULT_SERIVCE_LISTENER = (XE) at the bottom of the listener.ora file. Explicitly defining the XE service in the listener.ora file allows the listener to find it while the system is running under the Cisco AnyConnect VPN. The only hiccup I found by doing this is that the XE service is discovered twice by the listener when the system is NOT running under the Cisco AnyConnect VPN. It still works OK. The listener just seems to ignore the repeated definition of the XE service (see output below):
C:\ProgramData\oraclexe\app\oracle\product\11.2.0\server\bin>lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 13-JUN-2013 10:03:15
.......(omitted output).......
Service "XE" has 2 instance(s).
Instance "XE", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Instance "xe", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: DEV-M-137GF, pid: 5544>
(ADDRESS=(PROTOCOL=tcp)(HOST=DEV-M-137GF.paychex.com)(PORT=58257))
The command completed successfully
If anyone has a cleaner solution for this problem, please let me know. Otherwise, I am moving forward with what I did.
Thanks.....Paul

Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver

Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall   272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall   405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall   892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall   689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
     [move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.

Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1)

Problem configuring SSO: "Oracle SSO Warning - Unable to process request"

I'm having difficulty getting a sample application to work with SSO, and I was hoping someone could point me in to the right direction.
We've got 2 separate systems, call them ASserver and SSOserver. ASserver is running Oracle 9i AS, SSOserver is the infrastructure server (e.g. OID and SSO).
The application runs just fine on ASserver without SSO.
I made the change to mod_osso.conf so that the URL for the application is now protected, and added a partner application entry to the application (more on that in a moment).
When I go to the URL for the partner application, the browser is properly redirected to the SSO server and I am prompted to log in. After logging in, I get an error page with the error "Oracle SSO Warning - Unable to process request" (the URL is something like http://<ASserver>/osso_login_success?urlc=... etc).
Several questions:
- can my servlet just be a plain servlet, or does it need to do the various things described in the "SSO Application Developer's Guide"?
- when configuring the partner application on the SSO server, are success url and logout url supposed to be the osso_login_success and osso_logout_success URLs? Should they be on the ASserver or the SSOserver?
Any other recommendations?
Thanks,
dwh

Okay, solved. I am pretty sure I was suffering from the condition described in metalink Note:227221.1, "Oracle SSO Warning Logging On to Midtier Using Mozilla Based Browser" (http://metalink.oracle.com/metalink/plsql/ml2_documents.showNOT?p_id=227221.1)
although it was happening in IE as well.
Essentially, I modified the entry for the partner application to change the port numbers from 7778 to 7777, and now it works.
I think I also had several entries for the app server in the SSO server, and I don't know which one it was using. I got rid of all of them except the one named <oraclehome>.<restofdomain>, e.g. oas.foobar.com, where "oas" is the name of my app server's Oracle home.

Unable to connect to Oracle using OCI Drivers on Linux

Hi Everyone!
I am facing a peculiar issue while using Instant Client on Linux ( 64Bit ) running on Red Hat 4.1.
I have downloaded the instant client version 10.2.0.3(.zip) .so files from the below URL
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/linuxx86_64soft.html
UPloaded all the files to a directory under /opt and changed the .bash_profile file, the latest content looks like
ORACLE_HOME=/opt/instantclient_10_2
export ORACLE_HOME
PATH=$PATH:$ORACLE_HOME
export PATH
TNS_ADMIN=/opt/instantclient_10_2
export TNS_ADMIN
LD_LIBRARY_PATH=/opt/instantclient_10_2
export LD_LIBRARY_PATH
PATH=$PATH:$LD_LIBRARY_PATH
export PATH
CLASSPATH=/opt/instantclient_10_2:/opt/instantclient_10_2/ojdbc.jar
export CLASSPATH
Java.library.path=/opt/instantclient_10_2
export Java.library.path
As i have downloaded the Sqlplus utility as well, i am able to connect to the Oracle FARM via sqlplus.
On the other hand, i am unable to connect to the same database via the application. It constantly gives me the following exception,
java.lang.UnsatisfiedLinkError: no ocijdbc10 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1030)
at oracle.jdbc.driver.T2CConnection$1.run(T2CConnection.java:3138)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.jdbc.driver.T2CConnection.loadNativeLibrary(T2CConnection.java:3134)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:220)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:438)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:131)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:77)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:752)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:296)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:220)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:164)
at com.sun.gjc.spi.DSManagedConnectionFactory.createManagedConnection(DSManagedConnectionFactory.java:105)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.createResource(LocalTxConnectorAllocator.java:68)
at com.sun.enterprise.resource.AbstractResourcePool.createSingleResource(AbstractResourcePool.java:891)
at com.sun.enterprise.resource.AbstractResourcePool.createResourceAndAddToPool(AbstractResourcePool.java:1752)
at com.sun.enterprise.resource.AbstractResourcePool.createResources(AbstractResourcePool.java:917)
at com.sun.enterprise.resource.AbstractResourcePool.initPool(AbstractResourcePool.java:225)
at com.sun.enterprise.resource.AbstractResourcePool.internalGetResource(AbstractResourcePool.java:516)
at com.sun.enterprise.resource.AbstractResourcePool.getResource(AbstractResourcePool.java:443)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:248)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:176)
at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:327)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:235)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:165)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:158)
at com.sun.gjc.spi.base.DataSource.getConnection(DataSource.java:108)
at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:79)
at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:922)
at org.springframework.jdbc.core.JdbcTemplate.call(JdbcTemplate.java:984)
at org.springframework.jdbc.object.StoredProcedure.execute(StoredProcedure.java:117)
at com.gecf.uk.pca.dcs.util.SystemParametersDAO$SysParamsStoredProcedure.execute(SystemParametersDAO.java:150)
at com.gecf.uk.pca.dcs.util.SystemParametersDAO.getSystemParametersList(SystemParametersDAO.java:67)
at com.gecf.uk.pca.dcs.util.SystemParametersDAO.getSystemParametersMap(SystemParametersDAO.java:94)
at com.gecf.uk.pca.dcs.util.SystemParameters.loadParameters(SystemParameters.java:44)
at com.gecf.uk.pca.dcs.util.SystemParameters.<init>(SystemParameters.java:33)
at com.gecf.uk.pca.dcs.util.SystemParameters.getInstance(SystemParameters.java:72)
at org.apache.jsp.common.secure.mypayment_jsp._jspService(mypayment_jsp.java from :86)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:93)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:373)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:470)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:364)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:317)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
at com.gecf.uk.pca.dcs.web.util.SessionFilter.doFilter(SessionFilter.java:97)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:288)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
|#]
I have used the classes12.jar and ojdbc.jar which came with the download and nothing seems to work. A bit surprising when sqlplus works and not the application. I suspect there could be an issue with the driver class. I have been struggling to figure this out for days now...
Can anyone please share their thoughts if something similar was observed earlier please.
Any quick help will highly be appreciated.

ORACLE_HOME=/opt/instantclient_10_2
export ORACLE_HOMEYou don't set ORACLE_HOME with Instant Client.
PATH=$PATH:$LD_LIBRARY_PATH
export PATHThis is unnecessary.
CLASSPATH=/opt/instantclient_10_2:/opt/instantclient_10_2/ojdbc.jar
export CLASSPATHThis is wrong.
It should be:
CLASSPATH=/opt/instantclient_10_2/ojdbc14.jar:<whatever else you need there>
Java.library.path=/opt/instantclient_10_2
export Java.library.pathThis is useless; java.library.path is not an environment variable.
java.lang.UnsatisfiedLinkError: no ocijdbc10 in java.library.pathThe case is pretty clear. You want to use the OCI driver (your URL starts with "jdbc:oracle:oci:"), so the Java Virtual Machine is looking for libocijdbc10.so in the Java library path but cannot find it.
What is also clear is that the program does not use the CLASSPATH environment variable you set, because then it would never have found the Oracle Driver.
So it seems that your program is ignoring the environment you set (which would explain why it also ignores LD_LIBRARY_PATH which you set correctly).
You must have the environment variables set and exported in the shell that starts the "java" executable.
Also, check that there is no other ojdbc14.jar on this machine (use "find").
To help you debug your problem, let me explain how Sun Java sets Java library path on Linux:
- If you start java with "java -Djava.library.path=/some/dir:/other/dir ...", the Java library path is set to exactly that value.
- If you do not specify -Djava.library.path, the Java library path is taken from the environment variable LD_LIBRARY_PATH.
- Directories listed in /etc/ld.so.conf have no influence on the Java library path (which gave me quite a headache in the beginning).
Do you really need the OCI Driver? If you can do with the Thin Driver (i.e., use an URL that starts with "jdbc:oracle:thin:") you don't need any shared libraries at all.
Yours,
Laurenz Albe

Unable to connect to the informatica repository on oracle database 11g

hi all,
i have installed OBI Apps 7.9.6.0 with informatica 8.6.0 and no hotfix.
Now the problem is , when i create a repository service i get the error
" The service did not start due to the following error: *Unable to connect to the repository Oracle_BI_DW_Base on database* . " here Oracle_BI_DW_Base is also the name of my .rep repository that came with OBI APPS installation.
i have oracle database 11g installed and also created respective user for repository of informatica.
what should i do in this case??
plz help

Good Morning.
I had the same problem and I had the same IE 6, the problem was the translation between the IE6 from http and https, to solve it you just need to open your url typing
https:url:port, do no forget to put the s after the http, with this my problem was solved.
best regards.
Digudi - São Paulo - Brazil
Edited by: user12267194 on 24/11/2009 05:37
Edited by: user12267194 on 24/11/2009 05:38
Edited by: user12267194 on 24/11/2009 05:38

FRM-92052 error... unable to connect to server URL /forms/servlet;

Hi all.
I'm on forms 11g 11.1.2.1.0
I'm configuring my form and when I try to run it I have this error:
FRM-92052: unable to connect to server at URL /forms/servlet;
I have start up weblogic server and everything is ok.
When I try to run my form I have the error.
How can I solve it?
Thanks all for collaboration,
Fabrizio

I open my log file and I copy here error section:
java.lang.NoSuchMethodError: oracle/forms/net/ConnectionException.<init>(ILjava/lang/String;Ljava/lang/Throwable;)V
     at oracle.forms.servlet.BaseServlet.getConnectionException(Unknown Source)
     at oracle.forms.servlet.BaseServlet.logException(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.getRunformSession(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.getInfo(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.doGet(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.access$100(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<5-feb-2013 14.42.40 CET> <Notice> <Diagnostics> <missuri377> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <2e61ea05cba29510:6243aa29:13caa961585:-8000-0000000000000024> <1360071760720> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'AdminServer' has triggered at 5-feb-2013 14.42.40 CET. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = 5-feb-2013 14.42.40 CET SERVER = AdminServer MESSAGE = [ServletContext@6140131[app:formsapp module:forms path:/forms spec-version:2.5 version:11.1.2]] Root cause of ServletException.
java.lang.NoSuchMethodError: oracle/forms/net/ConnectionException.<init>(ILjava/lang/String;Ljava/lang/Throwable;)V
     at oracle.forms.servlet.BaseServlet.getConnectionException(Unknown Source)
     at oracle.forms.servlet.BaseServlet.logException(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.getRunformSession(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.getInfo(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.doGet(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.access$100(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101017 MACHINE = missuri377 TXID = CONTEXTID = 2e61ea05cba29510:6243aa29:13caa961585:-8000-0000000000000022 TIMESTAMP = 1360071760564
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
How can I solve my problem?
Thanks all for collaboration,
Fabrizio

WARNING: Unable to connect to URL: in oracle b2b adaptor

Similar Messages

Maybe you are looking for