Warp Stabilizer and Speed can't be used on same clip

...just my luck that on my first ever Premiere project (CS6) I'm building a timeline and need to use both the Rate Stretch Tool and the Warp Stabilizer on multiple clips. The message, "Warp Stabilizer and Speed can't be used on same clip" took me by surprise.
However, after research here on the Forum, I found a Workaround that I'm deploying:
"Apply the effects, nest and finally apply warp stabilize" Ann Bens
Here's what I did:
In my only sequence -- Sequence 01 -- I highlighted a clip that I had already applied Rate Stretch to.
chose Clip/Nest
This created a Nested Sequence 02 with the clip in it.
In Sequence 01, the clip now says, "Nested Sequence 02"
I applied the Warp Stabilizer to the Nested Sequence 02 clip and it worked. Both Rate Stretch and Warp Stabilizer have been applied to the same clip!
So I've done this like ten times to ten clips and now have 10 Nested Sequence folders.
Questions:
Are my step-by-steps correct?
Do I let these multiple Nested Sequences just keep piling up? (when I right click on a Nested Sequence and choose Clear, I get a warning message that I'm going to delete clip references)
Now that the workaround has worked, is there a way to close -- unlink -- from these Nested Sequence folders? If so how?
I am so Over My Head for a first project. I thought you could always compound Video Effects!
NotOnSugarMountain

Best is to make a copy of the timeline or clips that you are going to multiple nest etc.
If you screw up you can easily replace nested clips etc with a copy from the copy you made.
There is an undo function but most of the time its not enough.

Similar Messages

Warp stabilizer and speed can't be used in same clip. explain error message please.

Learning - from how to capture to how to do basic edits.
Trying to use warp stabilizer on some hand-held footage and got the red "NO" message.
Can I still do this, or did I do my edits in the wrong order as in I should maybe have used warp stabilizer first or something.

I have used various stabilisers over the past ten years, and have always found that the best stabilisation results are achieved with the raw footage, unless this has very low contrast. In that case it pays to apply a levels effect first.
I always export my stabilised clips to an intermediate file using a "lossless" codec before importing that new file into my project to replace the original footage. I use the free download UT codec for this. I have tried Lagarith and the free Avid DvxHD, but have had problems of one sort or another with each.
Speed changes never work well when the clip needs stabilising, in my experience.

Warp stabilize AND slow speed

I want to warp stabilize AND slow speed which are incompatible, so what is the recommended route on this please?
E.G. I would anticipate we must export one and reimport to do the other, or what? In which order? Is there a smarter way?
Does export reimport degrade the imagery? These kinds of things.
Thanks
Steve Z

I suggested WS into a DI as first step because it gives the editor options to do what they will with it later and to save on processing time.
A nest means the processing is required for 2 major fx during the edit process.

AE project crashes on startup - due to Warp Stabilizer and Highlight/Shadow

I've got a head scratcher here...
Firstly, I have been working on this project file for several days with no problems. Everything was running smoothly... working, tweaking, rendering... all successful.
A couple days after doing a final render, I went to re-open the project and got these two errors, followed by AE crashing:
To the best of my knowledge, I changed nothing on my system.
I've tried removing my 3rd parth plugins (Video Copilot Optical Flares, Element, etc...) but to no avail. The program still crashes when opening this file.
I've since installed the updates to AE CS 6, but still no luck.
Removing Warp Stabilizer and Shadow/Highlight allow me to open this project file (obviously telling me that its missing both).
I've tested out both plug-ins in a different file, and I'm able to open those no problem.
I'm running this on a Mac Book Pro running OSX 10.6.8
Model Name:
MacBook Pro
Model Identifier:
MacBookPro8,2
Processor Name:
Intel Core i7
Processor Speed:
2.2 GHz
Number of Processors:
1
Total Number of Cores:
4
L2 Cache (per Core):
256 KB
L3 Cache:
6 MB
Memory:
8 GB
AMD Radeon HD 6750M:
Chipset Model:
AMD Radeon HD 6750M
Type:
GPU
Bus:
PCIe
PCIe Lane Width:
x8
VRAM (Total):
1024 MB
Vendor:
ATI (0x1002)
Device ID:
0x6741
Revision ID:
0x0000
ROM Revision:
113-C0170L-573
gMux Version:
1.9.23
EFI Driver Version:
01.00.573
Any thoughts???

We've isolated the bug that is causing this behavior. It seems to only affect instances of the Shadow/Highlight effect on an adjustment layer over layer(s) with the Warp Stabilizer.
There are a couple of workarounds:
- One is to remove the Shadow/Highlight plug-in from the plug-ins folder and then open the project (and then fix the project to not have this effect on an adjustment layer over a Warp Stabilizer instance).
- Another is to precompose the layer(s) with the Warp Stabilizer effect.
We're working on a fix for this.

Have an airplay enabled AV Receiver - how do i set up Airplay I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the

have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciated

You are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network.

HT204053 Me and my daughter had been using the same apple id, she was triyng to change it now all of my iphone contact are gone, what can i do ti get it back , this is very important to me.

Me and my daughter had been using the same apple id, she was triyng to change it, now all of my iphone contact are gone, what can i do ti get it back , this is very important to me.

Your contacts are helpd on the server, so if you sign out from your iCloud account and sign into another one they will disappear. If you sign back into the original account they will reappear.

I have an iPhone 5s and an iPad 2 both using the same Apple ID how can I FaceTime the iPad from the iPhone?

I have an iPhone 5s and an iPad 2 both using the same Apple ID sometime I'd like to FaceTime the iPad from the iPhone to talk to my wife while at work how can I get it to do this it always says unavailable.

Naw I figure it out without all that had to go into the FaceTime settings and only use the phone number on the iphone and only use the Apple ID on the iPad works great now no need for two Apple ID or any signing in and out.
Thanks for your help though

I have multiple apple devices mainly used between me and my wife , my question is that can i have two sets of contacts backed up to icloud one for her devices and one for my devices using the same itunes account

i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
please guide

You can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device). There is no requirement that you use the same Apple ID for purchases and for iCloud.

I have just brought 2 mini's for my boys for xmas. 1. can I connect them both to my existing Itunes account or do I need to set up something different. and 2. can they be used on their dads account as well as mine, or only one?

I have just brought 2 mini's for my boys for xmas. 1. can I connect them both to my existing Itunes account or do I need to set up something different. and 2. can they be used on their dads account as well as mine, or only one?

You can set them up with your Apple ID if you want to. You can also set them up with their dad's Apple ID. Depending on how old the boys are, you can even let then have their own Apple ID's. The one thing that you don't want to do is have them use more than one Apple ID on their iPads.
If you want to be able to share purchased content, then setting them up with either your ID or your husband's (?) ID would be the way to go. If the boys share an ID with one of you, they can download content that you have already purchased without having to pay for it again.
If you and have the financial wherewithal to allow them to purchase their own individual content, I would recommend letting them have their own Apple ID. This way, as they grow older and eventually move on, they will have their own accounts, their own purchases .... No ties needed to your ID or to dad's ID. FaceTime and Messages will be a little easier to set up if they have their own ID's and they can have their own iCloud accounts as well. However, they must be 13 years old in order to have an Apple ID and iTunes account. If they are under 13, then it's a no brainer you will have to use yours or their father's ID.
Whatever you decide to do, just don't switch from one ID to another ID on the iPads. That gets confusing and they could end up locking themselves out of one of the ID's for 90 days if they download a past purchase using a different ID.

I have two accounts and for both accounts I use the same emails. I cannot verify my email on my main account because of this. Help? Can I just cancel my other account to avoid confusion?

I have two accounts and for both accounts I use the same email. I cannot verify my email on my main account because of this. Help? Can I just cancel my other account to avoid confusion? I am totally stuck now.

By the sounds of it you have linked Email Accounts, if so this means that you will both recieve the majority of the same Emails, and if you do and you read them on your account (which is linked with your husbands) then they will appear to read on the both of them because they are linked. With the majority of Email providers these days they're Emails are (simplified) in the cloud you could say, meaning that if you read or delete shared Emails then it will do the same on both accounts rather than just the yours.
I hope all that made sense, sorry that I couldn't be of anymore assistance.. If you havent already try googling your problem - you may find some answers on there

Error message that my iPhone and iPad "can't be used

I have just installed the latest version of iTunes. I am getting error messages that my iPhone and iPad "can't be used because the required software is not installed". It asks me to uninstall and reinstall but I've done this and am getting the same message.
Thanks.
Sam

You have it set to automatically set the time and date. To do that it has to be able to reach out to iCloud to get the time and date and something is blocking it from being able to do so. So either need to fix the network/Internet connection or set it to not automatically set the time.

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over.

Hi The next thing to do is to Restore back to Factory Settings this will get rid of any bugs . After Restore use same Apple ID /Password then you should get all your Apps & data back If you still have this problem make an Appointment at Apple Store . Cheers Brian

I have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?

i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?

Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2

I forgot my own identity and password and I can not I use my iphone 5c

I forgot my own identity and password and I can not I use my iphone 5c

Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
The Apple ID and Password that was Originally used to Activate the iDevice is required.
mohamed.reda.nasr wrote:
I forgot my own identity and password and I can not I use my iphone 5c
1) iForgot
2) Find your Apple ID

I just upgraded my software to OS X 10.9.2 (13C64) and i can no longer use my printer (epsun stylus sx235w). any ideas why this would happen?

i just upgraded my software to OS X 10.9.2 (13C64) and i can no longer use my printer (epsun stylus sx235w). any ideas why this would happen?

Mavericks is the name of your operating system. It is otherwise known as OSX 10.9.
The previous versions were indeed "cat things".
The way you would know if you need to download new software from Epson is to go the Epson website and search for your printer there, look for downloads, and see if they have new software listed for 10.9.
You can revert your system back to what it was two weeks ago. This would be easier to do if you have a backup that you made prior to installing Mavericks (like with Time Machine). If you don't have a backup (sounds like you probably don't), you can look here for some directions about how to go back to the "Cat Thing" that you had prior to installing Mavericks: How to revert OS X back from Mavericks: Apple Support Communities
If all of this is too hard for you, you could take your Mac in to your Apple store and ask them to help you.

Warp Stabilizer and Speed can't be used on same clip

Similar Messages

Maybe you are looking for