WAS 6.2 for Enterprise vs Netweaver

Hello,
I get confused by a SAP consultant. To my knowledge there is only one version of WAS 6.2. He thinks there is a version WAS 6.2 for Enterprise and a WAS 6.2 version for NetWeaver. Anybody heard about that?
Alex

Hi,
A detailed description on the architecture of WAS and its history is available at the link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/introduction to the sap web application server
Please check it, it will solve all your confusions.
Regards,
Siddhesh

Similar Messages

Crystal Reports for Enterprise 4.1: Error while saving report to BI platform "There was an unexpected error saving your report to the server. Please try again or contact your administrator if the problem persists."

Hi All,
I am able to create a report in Crystal Reports for Enterprise 4.1 on top of an OLAP connection (data source BEx query). However, when I am trying to save this report to BI platform, I am running into the following error:
The error was not resolved even after applying the following SAP KBA notes:
1676033
1709390
1922003
1727813
Below is the excerpt in the error log (on the path mentioned in SAP NOTE: 1709390),
However, could not make much sense out of it, as to how can the issue be resolved. If anyone has useful insights on this issue, please share the same with me.
Regards,
Alston

Hi Alston
Since you have CR for Enterprise then you also have BI and thus most likely you also have an S user ID. You can use the S user ID to create a phone incident at it is part of your Enterprise Support Package. Just saying as this may be the most efficient way of proceeding at this time(?). But please don't take as me trying to push you off of SCN .
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Pro/cons for dev. environments for Enterprise Portal components

Hi
I am looking for some positives and some negatives that should be considered when a client needs to decide on which development environment to use for Portal development. I am aware of three products, Visual Composer, Web Dynpro and NW Developer Studio.
Is there anyone who can briefly try to explain the positives and negatives with each?
Any feedback is greatly appreciated!
Kind Regards,
Thomas Kjelsrud

Hi Thomas,
first, welcome on SDN!
Then about your question:
The standard IDE for any kind of portal components / applications is the NetWeaver Developer Studio (NWDS). By this, you can develop different things (EJBs etc pp), but also portal specific projects (in the end: PAR files, based on AsbtractPortalComponent, DynPages or JSPDynPages) as well es WebDynpro applications. The latter are able to run standalone (ie not driven by EP, but by WAS J2EE 6.40), but there is also a tight integration into the portal environment.
If this is understood, you know that the question "NWDS or WebDynpro" does not make sense, for WebDynpro is developed through NWDS.
A first overview about this issue so far is https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/exploring java programming models with sap netweaver developer studio.pdf
In that PDF, also the relationship of the tool NWDS and the programming model of WebDynpro is given (even if the term "relationship" may be misguiding, it's more that these two things are to be seen in a comparison, for they use different techniques, are meant for different aims etc.)
The VC is a totaly visual tool to build "applications" for EP mainly based on access to R/3 as backend system, for example. So it's focus is on building UIs which access backend information. That for sure is important for backend integration into EP, but the term "application" does not really fit.
For VC see https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/developing code-free business applications using visual composer - beginner.abst and https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/visual composer - a model-driven development tool for enterprise portal iviews.pdf as an introduction.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers. Thanks in advance!

I am using the Good for Enterprise app to synch my outlook email and when I try to turn on ICloud to synch my music in ITunes I get a warning that I will not be able to synch my Iphone 4S with my computer. Does this mean my office PC or home Mac?

I am using Good For Enterprise on my Iphone 4s to connect with my Office PC Outlook email system. I am having trouble synching my Itunes music from my Mac at home with my IPhone 4s. I am considering using ICloud to share the music as I also have an IPad2. When I go to turn on the ICloud application, I get a message that alerts me to the fact I will no longer be able to synch with my computer. Does that mean with my Office PC and my Outlook email, or my Mac and my home email and other applications? I want to use the ICloud but don't want to screw up my Good for Enterprise application and connectivity with my Office PC and Outlook email. What should I do to be able to update all my tunes and photos on my IPhone 4S and IPad2 from my Mac?

I seem to never tire of saying this. It was for Apple when they first announced 10.7 to disclose this. Yes, it was widely reported -- or rather, rumored -- but not by Apple. And many people who have gotten caught by this assumed that Apple itself would have told them beforehand about the loss of this very important feature which they had come to rely on. As far as I know, not even in fine print, does this appear anywhere on the Lion announcement or any of its links.
I am not saying Apple had to continue Rosetta in Lion, or forever, just that if it was going to be dropped, it should have been made known.
As relative "insiders" we should not forget that many people don't have the time, habit or interest to do this kind of research. I think it is a breach of trust that Apple has never directly made this announcement or given people the opportunity to decide beforehand if giving up their PPC apps for a new OS is a worthwhile tradeoff.

CRYSTAL REPORT FOR ENTERPRISE ON ECC

Hi Everyone,
I have been trying to connect Crystal Report for Enterprise over ECC via universe as we don't have option
to connect CR4E directly to ECC.
So, I have made a universe in IDT and published it in repository.
Now, when I am using that universe in WebI Report and DashBoard then it is working fine but the same is throwing
the error while I am trying to connect with CR4E 'Failed to execute query: 'Fail to create an instance of Job : com/businessobjects/i18n/locale/BoLocale'.
The same error 'Fail to create an instance of Job : com/businessobjects/i18n/locale/BoLocale' was also coming when we try to save the IDT with Secure Connections is set to Server Middleware(Window -> Preferences->Information Design Tool ->Secured Connections ->Server Middleware).
Regards,
Raghwendra

Hi,
As per the SAP Note 2022008 - Crystal Reports for Enterprise gives error with ERP Universe this is is the bug in
SAP Crystal Reports for Enterprise 4.1 Support Pack 3 Patch 1
SAP BusinessObjects Business Intelligence Platform 4.1 Support Pack 3 Patch 1
This issue has been reproduced at SAP and is found to be a bug (ADAPT01725424).
Solution
This issue has been fixed with BI 4.1 SP3 Patch3.
Regards,
Amit

The OMS is not set up for Enterprise Manager Security

Hi, I'm trying to add an agent to grid control and its not connecting with the management server because i cant secure it...
bash-2.05$ ../../bin/emctl secure agent <password>
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is already stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
i have tried this on two seperate servers, both do the exact same thing. However, on my repository server where the OMS is housed, i can secure the agent no problem. Does anyone know what the problem could be? My OMS is on a Linux (SuSE 10.2) 32-bit machine.
heres the emdctl.trc on the agent machine:
2007-07-11 11:00:20 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:22 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:22 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:05:10 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:05:10 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:10:08 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:10:08 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
bash-2.05$ lsof | grep 3872
bash-2.05$
seems to be failing the connect but nothing is running on the port so i'm not sure why
Thanks in advance
Message was edited by:
user581869

some further information and hopefully someone can help me...
I went to the OMS binary folder (fmc45712:$OMS_HOME/bin) and executed the following commands...
$OMS_HOME/opmn/bin/opmnctl stopall
$OMS_HOME/bin/emctl stop oms
$OMS_HOME/bin/emctl secure oms
$OMS_HOME/bin/emctl start oms
$OMS_HOME/opmn/bin/opmnctl startall
then i go to $AGENT_HOME on the OMS machine (fmc45712:$AGENT_HOME/bin) and execute..
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /opt/oracle/OracleHomes/agent10g/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is secure on HTTPS Port 1159
I then to go the server i deployed the agent on that i want to get communicating wtih my OMS...
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /u101/em/agent10g/sysman/config/emd.properties... Done.
Agent is unsecure at HTTP Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is running but has not been secured. No HTTPS Port available.
same command, different computer, but on the same network, and it just doesn't work. The OMS is on Linux x86 and the agent on the alternate computer is on HP-UX. If anyone has any help it'd be much appreciated.

Key instead of Text in Results Object in Crystal Reports For Enterprise

Hi All
I recently developed a report in Crystal Reports for Enterprise and at some point afterwards the text description of the hierarchy used in the report was changed. The Key remained the same, however this caused the report to crash. The solution was to click Edit Query Option in the Results Objects and simply come out without changing anything. This refreshed the results object pane and the report ran as normal. I work in an environment where the text of hierarchies is liable to change frequently and without notice and it will be unfeasible for me to constantly refresh the results object every time a change to a hierarchy is made. Therefore is there a way to define in CRE to use the Hierarchy key instead of the text as this is less likely to altered?
Many Thanks in advance
Neil

Excuse me I have my terminologies mixed up, what I mean is the name of the characteristic used in the report. An example would be a characteristic called with the text of "Material" and a key of "0MATERIAL", if I were to change the text description to "MAT" and the key where to remain the same. This would cause crystal report to error because it expecting the Characteristic name to be "Material". Is there a setting or something in CRE to have it default to the key only so if the text of a characteristic or even a key figure for that matter where changed there would be no impact to the Crystal report.
I hope this makes more sense this time round
Thanks
Neil

Bex Query Variable error in Webi and Crystal for Enterprise

Hi,
We just upgrade to BOBJ 4.1 SP2 and BW7.4 SP5
I am creating a webi report based on a BEx query. There is Variable on Period/Fiscal Year from BEX side(Mandatory prompt) when I try to create a Webi or Cyrstal for Enterprise report the below error pops up. Other Bex queries work correctly. Can it be the values in the variable the following values exist when execute from Bex i.e. 001.2012; Period 2013
Is the SAP Note : 1611185 relevant for 4.1 SP2
Error:
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: Termination message sent
ABEND DBMAN (257): SQL Error: INTERNAL_ERROR
MSGV1: INTERNAL_ERROR
Is this True for BOBj4.1 SP2?
http://scn.sap.com/thread/3362312
Selection range variables are not fully supported in Crystal Reports for Enterprise.
Message was edited by: Tienie Nothnagel

Henry Banks wrote:
> I know what you mean. In BEx, it's automatic: the default values are pre-selected at runtime, based on user authorizations
>
> In WebI, user needs to do a 3-click workflow to select the authorized values from the prompt dialog. This can be broken down into 3 phases:
>
> (a) initialize prompt u2013 empty pane.
> (b) refresh list of values,
> (c) select response values.
Thanks Henry! I was looking for this confirmation that it is a limitation of Webi and I'm not missing something.
Henry Banks wrote:
> ---> make this BEx variable u2018mandatoryu2019 u2013 this will trigger an automatic refresh mechanism on the list of values, and show it to the user. This will eliminate steps (a) & (b).
>
It is not possible to set Authorization variables as mandatory. They are set to "optional" and cannot be changed (BEx limitation).
Henry Banks wrote:
> Unfortunately, BEx and WebI are not like-for-like replacement tools. Not all u2018normalu2019 BW features integrate natively into BObj.
> So this will also have to be an excercise in positioning a new product to your onboarding users. (i.e. just click the button)
> Regards,
> H
I understand that. Thanks for your suggestion.

Difference between Crsytal Report 2011 and Crystal Report for Enterprise 4

difference between Crystal Report 2011 and Crystal Report for Enterprise 4.0?
I think Crystl Reprt 2011 has more function, is it right?

Hi,
I recently attended a SAP Virtual trianing on SAP Business Objects BI 4.0.
Here are few extracts from that which probably shows some light to you:
SAP Crystal Reports 2011
1. UI and associated processing servers remain the same as CR 2008
2. Incremental update to CR 2008 with a few new features*
3. Continue to provide current CR 2008 functionality as-is for existing customers
SAP Crystal Reports for Enterprise 4.0
1. Major update & redesign of the Crystal Reports Designer and associated processing servers
2. Focus on streamlined report design, reporting against BI 4.0 Universe, & reporting against SAP BW data
3. Provide the foundation for all future releases of Crystal Reports
Differences between these two releases:
Data Source & Usage Type                                       General Recommendation
1. SAP BusinessObjects BI 4.0                                        SAP Crystal Reports Relational Universe (UNX) for Enterprise
OLAP Universe (UNX)
2. SAP NetWeaver BW 7 BEx Query (BICS)                    SAP Crystal Reports for Enterprise
3. SAP NetWeaver BW 3.5 BEx Query                             SAP Crystal Reports 2011
4. SAP Profitability Cost Management                              SAP Crystal Reports for Enterprise through Analysis View
SAP Strategy Management
SAP Budget, Planning and Consolidation
SAP Extended Analytics
5. Platform Driven Alerting                                                SAP Crystal Reports for Enterprise
6. Business Views                                                           SAP Crystal Reports 2011
7. Direct RDBMS or OLAP access                                    SAP Crystal Reports 2011
    SAP ERP/ Live Office Content/
    Enterprise search content
Regards
Gowtham

CR for Enterprise 4.0: Unable to retrieve the datasource configuration

Hello Experts, I have the following issue with CR for Enterprise: I can successfully connect to our BI server, but when I select a universe I would like to build a report on, I receive the following error message about the validity of my data source: "Unable to retrieve the datasource configuration: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN minor code: 0x0 completed: No". The universe I am trying to connect to is based on a relational connection and was built using the IDT 4.0 SP 1.
Thanks a lot for any guidance on how this could be resolved.
Sergey

Hi Surgey,
Well that is very strange! Is Crystal Reports for Enterprise installed on the server machine or on the local workstation?
If we are using Crystal Reports for Enterprise which is installed on a sperate workstation, try installing it on the server machine and then try to connect to universe.
- Kuldeep G

Setting Application Context Attributes for Enterprise Users Based on Roles

Hello,
We have an Oracle 11g database with a table containing data from multiple sites (a SiteID field identifies the site for a record). Since application users can have access to different subsets of sites, we would like to use Oracle's Virtual Private Database feature to enforce row-level security on the table.
I did a successful proof-of-concept with database users. I created a role for each site (example: USER_SITE_A, USER_SITE_B, ...), and then assigned the appropriate site roles to each database user. I then created a package (run via a logon trigger) which set application context attributes for each site. If the current database user has been assigned a role for a given site, then the corresponding attribute named "SITE_PRIVILEGE_SiteID" is set to 'Y'... otherwise, it is set to 'N'. Here is the code which worked to set application context attributes for database users:
-- For each record in my RoleSitePrivileges table, set
--   an attribute named 'SITE_PRIVILEGE_<SiteID>'.
--   If the current user has been assigned a role matching
--   the value in the 'RoleName' field, set the corresponding
--   attribute to 'Y'... otherwise, set it to 'N'.
FOR iPrivRec IN (SELECT RoleName, SiteID
                   FROM RoleSitePrivileges
                   ORDER BY SiteID)
   LOOP
      SELECT COUNT(*)
        INTO roleExists
        FROM dba_role_privs
        WHERE granted_role = UPPER(iPrivRec.RoleName)
          AND grantee = USER;
      IF roleExists > 0 THEN
         DBMS_SESSION.set_context(
                     namespace   => 'my_ctx',
                     attribute   => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
                     value       => 'Y');
      ELSE
         DBMS_SESSION.set_context(
                     namespace   => 'my_ctx',
                     attribute   => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
                     value       => 'N');
      END IF;
   END LOOP;To finish things off, I created a security policy function for the table which returns the following:
RETURN 'SiteID IN (SELECT TO_NUMBER(SUBSTR(attribute, 15))
                     FROM session_context
                     WHERE attribute LIKE ''SITE_PRIVILEGE_%''
                        AND value = ''Y'')';This setup worked great for database users. I am now working to do a comparable proof-of-concept for enterprise users created in Oracle Internet Directory (OiD). I have Enterprise User Security (EUS) up and running with OiD, global roles created in the database, enterprise roles defined in EUS with global role assignments, and enterprise roles assigned to OiD users. The enterprise users are able to successfully login to the database, and I can see the appropriate global role assignments when I query the session_roles view.
I tried using the same application context package, logon trigger, and security policy function with the enterprise users that I had used with the database users. Unfortunately, I found that the application context attributes are not being set correctly. As you can see from the code above, the applicaiton context package was referencing the dba_role_privs view. Apparently, although this view is populated for database users, it is not populated for enterprise users.
I tried changing the application context package to use invoker's rights and to query the session_roles view instead of the dba_role_privs view. Although this package sets the attributes correctly when called manually, it does not work when called from the logon trigger. That was an oops on my part, as I didn't realize initially that a PL/SQL procedure cannot be called with invoker's rights from a trigger.
So, I am now wondering, is there another view that I could use in code called from a logon trigger to access the roles assigned to the enterprise user ? If not, is there a better way for me to approach this problem? From a maintenance standpoint, I like the idea of controlling site access from the LDAP directory service via role assignments. But, I am open to other ideas as well.
Thank you!

Hello,
We have an Oracle 11g database with a table containing data from multiple sites (a SiteID field identifies the site for a record). Since application users can have access to different subsets of sites, we would like to use Oracle's Virtual Private Database feature to enforce row-level security on the table.
I did a successful proof-of-concept with database users. I created a role for each site (example: USER_SITE_A, USER_SITE_B, ...), and then assigned the appropriate site roles to each database user. I then created a package (run via a logon trigger) which set application context attributes for each site. If the current database user has been assigned a role for a given site, then the corresponding attribute named "SITE_PRIVILEGE_SiteID" is set to 'Y'... otherwise, it is set to 'N'. Here is the code which worked to set application context attributes for database users:
-- For each record in my RoleSitePrivileges table, set
--   an attribute named 'SITE_PRIVILEGE_<SiteID>'.
--   If the current user has been assigned a role matching
--   the value in the 'RoleName' field, set the corresponding
--   attribute to 'Y'... otherwise, set it to 'N'.
FOR iPrivRec IN (SELECT RoleName, SiteID
                   FROM RoleSitePrivileges
                   ORDER BY SiteID)
   LOOP
      SELECT COUNT(*)
        INTO roleExists
        FROM dba_role_privs
        WHERE granted_role = UPPER(iPrivRec.RoleName)
          AND grantee = USER;
      IF roleExists > 0 THEN
         DBMS_SESSION.set_context(
                     namespace   => 'my_ctx',
                     attribute   => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
                     value       => 'Y');
      ELSE
         DBMS_SESSION.set_context(
                     namespace   => 'my_ctx',
                     attribute   => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
                     value       => 'N');
      END IF;
   END LOOP;To finish things off, I created a security policy function for the table which returns the following:
RETURN 'SiteID IN (SELECT TO_NUMBER(SUBSTR(attribute, 15))
                     FROM session_context
                     WHERE attribute LIKE ''SITE_PRIVILEGE_%''
                        AND value = ''Y'')';This setup worked great for database users. I am now working to do a comparable proof-of-concept for enterprise users created in Oracle Internet Directory (OiD). I have Enterprise User Security (EUS) up and running with OiD, global roles created in the database, enterprise roles defined in EUS with global role assignments, and enterprise roles assigned to OiD users. The enterprise users are able to successfully login to the database, and I can see the appropriate global role assignments when I query the session_roles view.
I tried using the same application context package, logon trigger, and security policy function with the enterprise users that I had used with the database users. Unfortunately, I found that the application context attributes are not being set correctly. As you can see from the code above, the applicaiton context package was referencing the dba_role_privs view. Apparently, although this view is populated for database users, it is not populated for enterprise users.
I tried changing the application context package to use invoker's rights and to query the session_roles view instead of the dba_role_privs view. Although this package sets the attributes correctly when called manually, it does not work when called from the logon trigger. That was an oops on my part, as I didn't realize initially that a PL/SQL procedure cannot be called with invoker's rights from a trigger.
So, I am now wondering, is there another view that I could use in code called from a logon trigger to access the roles assigned to the enterprise user ? If not, is there a better way for me to approach this problem? From a maintenance standpoint, I like the idea of controlling site access from the LDAP directory service via role assignments. But, I am open to other ideas as well.
Thank you!

Enhancement pack for enterprise portal

Hi,
How do I identify the enhancement pack for enterprise portal?
Also where is the information on the new features in the EHP 3 for portal listed?
Thanks and Regards,
Mahantesh

Hi Mahantesh,
Please remember that the Portal is part of the SAP NetWeaver, so all the improvements will be contained in the EhP for NetWeaver.
I'd like to refer you to the SAP Enhancement Package 1 for SAP NetWeaver 7.0 page here in SDN
at:
SAP Enhancement Package 1 for SAP NetWeaver 7.0
There you will get all the information about your request.
It's very important to remark the following information:
- This EhP for NetWeaver is not in General Availability, currently is in the RampUp phase, for more details you can check the RampUp page in the SAP Service Marketplace (login required) at: http://service.sap.com/rampup
- Certain pre-requisites apply (like Support Packages)
- To get this Enhancement Package you have two options, apply for the RampUp (you have to be in touch with your local subsidiary for details) or wait for the official release. All the information about dates and procedures are fully mentioned in the links provided before.
I hope you find this information useful.
Kind Regards,
Luis

Installing administrative tools for Windows 10 Technical Preview for Enterprise

At first I was upgrade my Windows 8.1 to Windows 10 Technical Preview for Enterprise every things done will then
I try to install administrative tools for windows 10 technical preview for enterprise I found the .msu file from Microsoft website but when I tried to install it, it gives me the following error:
Windows Update Standalone Installer
installer encountered and error: 0x8024001d
is there anyone to help me regarding above issue.
Thanks
Zelgay Kunari

Hi zelgay,
This is my result:
From your error code, it seems this is relate to your windows update, please use following command to fix corrupted files:
DISM.exe /Online /Cleanup-image /Restorehealth
In the meantime, you can delete temporary update files in the SoftwareDistribution folder:
Stop Windows Update service.
Open File Explorer.
Double-click the local hard disk where Windows is installed, typically drive C.
Double-click the Windows folder, and then double-click the
SoftwareDistribution folder.
Double-click the DataStore folder to open it, and then delete all files and folders in the folder.
Note If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Click the Back button. In the SoftwareDistribution folder, double-click the
Download folder to open it, and then delete all files in the folder.
Restart Windows Update service.
Alex Zhao
TechNet Community Support

Iphone 4 - Good for Enterprise - Notifications

I am having an issue with receiving Notifications on my iPhone from my work e-mail (Good for Enterprise). I have a Corporate E-Mail plan from Verizon and Push Notifications are turned on in Settings on my iPhone. However, I am not notified when I receive email or for Calendar reminders unless I open the Good application. Any suggestions?
-Mark

Thank you for your inquiry. Adding to what was stated, perhaps you could try powering off your device to see if doing a soft reset would help the reminder email notifications to come through to your phone. Even though you have the push function enable, the opening of Good for Enterprise refreshes the connection to your email server allowing new e-mail to be sent to the device. For additional assistance, please refer to this website link: http://www.good.com/support/

Logical Destination/Service Group for Enterprise Services

Hi,
we have a Discovery System V3 and published the Services into the Services Registry of a seperate CE 7.1 installation. Now when I create a NetWeaver BPM process that calls an Enterprise Service from the discovery system I have to specify either a logical destination or a service group.
I know that they are used to configure Web Services (authentication, etc.), but do I have to use them for Enterprise Services delivered by SAP? I thought they are ready-to-run???
Thanks,
Manfred

Yes, we have to use either logical destination or service group. This complies with the new configuration approach of SAP ESOA which is described here: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40dabb46-dd66-2b10-1a9a-81aa620098b3.

WAS 6.2 for Enterprise vs Netweaver

Similar Messages

Maybe you are looking for