WatchService issue with Mounted network drive.

Hi
I ma trying to implement Java "watchService". I am unable to register network mounted drive path. Is there any solution for this.
Path ftpFolder = Paths.get("H:/Ftp/Incoming/");
where H is mounted Drive.
Thanks
Shreenivasa.

1006584 wrote:
Hi
I ma trying to implement Java "watchService". I am unable to register network mounted drive path. What happens? Error? Your oven turns on?
And please, if the answer is "I get an error", be so kind as to post the actual error you are getting. Otherwise you will be asking people to read your mind.

Similar Messages

Having issues with Mounting older drive/time machine

Hey folks, I'm having issues with mounting a ex hard drive. It works, but there is a passcode for it, due to being my time machine drive, I dont remember the password, is there anything I can do to reset it? if not how do I wipe it clean? I went into disk disk Utilities and everythink looks fine.. Check out the pics Iput up

I dont remember the password, is there anything I can do to reset it?
No.
if not how do I wipe it clean?
If you can connect the drive to a computer running Windows or a version of OS X older than 10.7, erase the drive that way. Otherwise see the link below.
Hard disk bricked after using file vault with time machine

Image Ultra Builder 3.x issue with T61 Network Driver load

Hello,
I am having issues with a Network deployment of an image on a T61 (7659-12U) During the intial boot up phase with the Network Boot disk that was created from IUB, I receive and error 1231 - The Network Location cannot be reached.. I am currently using IUB for deployment of A31, T40/42 as well as the T60 model line. None of these loads are having the problem.
Any help on this would be very much appreciated.
Thank-you in advance.
Ed

Hi,
IUB 4.01 is using WINPE 2.0<Vista based> and IUB 3.1 was using WINPE 1.0/1.1<XP Based>.
This has nothing to do with the actual image deployment. It's just that the WINPE looks more like
Vista. And this is why the method changed after you updated from 3.0/3.1 to 4.00/4.01.
To answer your questions from before:
1) Does updating IUB to version 4.01 still allow me to deploy Windows XP ?
Yes, it's still supported and possible.
2) Where on the boot CD should the new driver files be located. I took this to be PREBOOT\DRIVERS ?
As the new IUB is using WINPE 2.0, the best location for the NIC drivers is the file :
tvtos\winpe.wim
However, this is my advice.!
For my Image deployment I'm no longer using the CD for network deployment. I'm using USB key which gives me more options for the image deployment and the automatization of the deployment process.
However, if you want to use CD for network deployment, then you can do it in following way.
!!!NOTE: this is not the offical way, nor the supported way, but trust me, that it's working like charm !!!
- go to your repository location %repositorylocation%\modules
- find the file called "Z633003A.TVT" and open it using your fav zip application
- after you open this file, go to following location: tvtos\
- extract the "winpe.wim" and using WAIK unmount this file and add the NIC drivers into this .wim file
- after all the drivers are in the winpe.wim file, just copy it back to the "Z633003A.TVT" file and create a new Deployment CD
How to add NIC driver using WAIK:
This is prety easy step, but for more info, check following link:
http://www.svrops.com/svrops/articles/winvistape2.htm
As I described earlier, I'm using USB key for Network image deployment, so I have not done it this way, but I have done it a bit simplier.
Here are my steps:
- created a Distribution USB key <suing the same method, that you are using when you create a Network deployment CD, but instead of a CD I select my USB key>
- once the USB key was created successfully I unmount the "tvtos\winpe.wim" file and add all the NIC dirvers into it
This is all that I have done.
Yes, of course there are couple other steps, that I do, like modifying the BCD file, adding other WINPE files, diagnostics and other deployment tools, however, this is not realy a part of IUB, I'm using it for my WDS server and other deployment tools, that I need to use. If you know, what I mean, then you surely understand, that it's a live safer to have everything on one USB key, then on multiple CD where I need to search throught all of then to find the correct CD.
Let me know, whether this method is more suitable for you.
As described above, this is not the realy official/supported way, but it's working for sure.
Rgrds

Fast User Switching with Mounted Network Drive?

I have a headless G4 Cube running 10.5.8 with a 2TB firewire drive plugged in for storage accessable to any of my macs here at home. I can access it fine with my 2 desktops over ethernet and wirelessly. Recently we decided to consolidate our 2 desktops into one using the muliple users feature. Seems to work fine, and both accounts can access the shared drive. They are logging in with the cube's admin credentials, and the shared drive is set to ignore permissions. I have the drive set to mount on login with a startup item in the system login items prefs. As long as I logout before switching users, everything is good.
The problem arises with Fast User Switching which we'd love to be able to use. I can't figure out how to connect to the drive in one account without the 2nd account then seeing it as a volume without proper permissions, then that account creates a new volume mount for it (which doesn't work with iTunes properly and seems to cause other wierd issues).
Example: So say 'user1' logs in, mounts the drive 'Jukebox'. everything seems OK so far. 'Jukebox' is on the desktop and iTunes finds the music. Now I fast user switch to 'user2' and there is a 'Jukebox' on the desktop with the red minus icon indicating I don't have permissions to access it. If I then browse the network and mount the drive, I end up with ANOTHER 'Jukebox' on the desktop. BUT iTunes doesn't see it properly. If I look in the /Volumes/ folder with the Terminal, I see a mountpoint for 'Jukebox' (with the owner of 'user1' group 'staff') and now a new mountpoint called 'Jukebox-1' (with the owner of 'user2' group 'staff').
It seems when you mount a AFP drive, it creates the Volume with the current user and staff group, but switching to another user then can't access that when it sees it in the /Volumes folder. You try to mount again and it creates a NEW mountpoint, names it with a '-1' at the end and you can use that (but iTunes cant).
So... how does one use a shared drive that you want on BOTH users desktops with Fast User Switching turned on? Is there a way to have the drive mounted BEFORE either user logs in, such that it will be seen as any other local drive (which doesn't have the issue)??
Or is there some other way I can attach to the network volume in each account on login so both have access to music and videos with full permissions?
I'm really stumped here after 2 hrs of googling, searching here and trying things.
TIA

I've not had any luck with the suggestions in the link either.
Here's two other approaches I've tried and failed with:
1. Creating a new share point on the cube itself so that one user can mount it as a different volume. Then the issue is that I still don't have a volume named "Jukebox" available to each user when switching. I DO have access now to the data from both accounts, but under 2 different mount points (volume names) and the xml file for iTunes is hard coded with the path for each mp3 including the "Jukebox" volume name... so no go.
2. Tried figuring out a way I could script a mounting of the share with the terminal thinking I could then run that shell script at startup. Can't seem to get the sytax right. If I create a directory in /Volumes and mount and afp share to it, it takes on the ownership of root/wheel which I can't access in the finder and can't seem to change.
BUT I'll keep playing with both these ideas a bit... the first one might be overcome with a bit of logic and the 2nd if I can get the syntax right to mount the share with afp_mount and give it the correct ownership/permissions such that when a user logs in she/he sees the volume on the desktop and has full r/w access to it.
thanks again. if you offhand know the syntax for that, let me know

Photoshop Lag with mounted Network Drive

Me and a co-worker have the same problem, we work in a production environment. We do all of our work on a network. We are using CS3. Normally we have 4 other macs mounted on our desktop. There is one drive that when it is mounted, our files take 5 minutes to open and or save even if the file we are opening is on our desktop and 1meg. if we eject this drive then photoshop returns to normal. This mac that is mounted is our customer file server so all the stuff we need to open in photoshop is on this drive so it has to be mounted. This problem seemed to start when we upgraged to CS3.
Any help?

Jay...
If you were able to take a decent poll of visitors past and present, I'd bet you'd find more than a handful of users just on this one forum who could tell you that Disk Warrior (or Drive Genius) has saved their *******' bacon, when no other utility or maintenance routine thrown at the hard drive would make it read properly.
It's happened twice for me in the past 11 years. The return on investment is incalculable.
I reiterate what Neil said:
"Does your boss buy a car and "save" by not performing routine maintenance?"
"Same thing with your computer. It needs routine maintenance, too. Explain to your boss that you'd be far more productive if your computer weren't crippled -- and it won't get better on its own. "
I had a boss who was a horrible tightwad (and was known as such throughout the printing industry in my city), and kept balking on getting me some more RAM for the PowerMac 7300/180 MHz I was using. I was limping along on 32 MB, and many of the files I was working on daily were in the 100-400MB range. You have no idea how many smoke and coffee breaks I used to take, waiting for simple operations to take place. He stopped in my building one day, and caught me next door at the deli, sipping a coffee and leisurely eating a bagel. He read me the riot act. I let him act like a ******* and chew me out in front of everyone in the deli.
When he was done going ballistic on me I simply said to him something like this: "If you weren't such a cheapskate, and would spend a little money to upgrade my machinelike I've begged you to for 6 monthsI could get a whole lot more done and we wouldn't be in this predicament, now would we?"
I fully expected to be fired on the spot, but I had gotten to the point where I didn't care. I was ALWAYS being given too much work for the machine to handle in a 50 hour week.
I had done research, and showed him facts and figures; I tried to make him understand in terms of dollars and centsa language he understoodbut he just didn't get it.
Next day, I yanked a 128MB module from my system at home and brought it to work. I called him at the other building and demanded he come right over.
I had the cover off the PowerMac; loaded into Photoshop I had one of our typical jobsabout 200 MB. I had a Photoshop action set to go, and I showed him how long it took to do a few common procedures (Rotate/straighten, crop, save). In fact, we even went next door, grabbed a coffee, ate a bagel, smoked a cigarette and came back, and the file still had about 5 minutes worth of processing to go.
Then, I shut down, popped the 128 MB RAM module in, and performed the same manipulations I had done before. The difference was extraordinary, down from about 20 minutes to under 5.
He
finally
understood what I was trying to tell him. He got on the phone right then and there and ordered a half GB of RAM, to be shipped overnight.
All of this is offered as an anecdote, as an example of why you need to find what ever way necessary to explain to your boss the need for the monetary outlay. The small amount he spends now could very well save him enormously in the future, in time, aggravation
and
money.

Issues with External Hard Drives

I hope this is the right forum for this one - please give me a steer if not! I've also posted it in 'Dock and Finder', but this forum seems equally appropriate, if not more so.
I'm getting repeated issues with External Hard Drives, including ones that I have been using successfully for months/years, suddenly failing to mount and then becoming 'unknown device' through the firewire branch of 'About This Mac'.
I've just bought a new hard drive on the grounds that the others had somehow failed, and the same problems are emerging. I decided to Repair Permissions on my iMac's internal drive, and am copying the results below, from repair runs conducted yesterday and today:
YESTERDAY'S REPAIR PERMISSIONS RESULTS
Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Repairing permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Permissions differ on "Library/Preferences", should be drwxrwxr-x , they are drwxrwxrwx .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
ACL found but not expected on "System/Library/User Template/English.lproj/Library".
ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
ACL found but not expected on "System/Library/User Template/English.lproj/Music".
ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
ACL found but not expected on "System/Library/User Template/English.lproj/Public".
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/LaunchDaemons/com.apple.usbmuxd.plist", should be -rw-r--r-- , they are -rwxr-xr-x .
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "sbin/umount" has been modified and will not be repaired.
Warning: SUID file "bin/rcp" has been modified and will not be repaired.
Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
Permissions repair complete
TODAY'S PERMISSIONS REPAIR RESULTS
Repairing permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
ACL found but not expected on "System/Library/User Template/English.lproj/Library".
ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
ACL found but not expected on "System/Library/User Template/English.lproj/Music".
ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
ACL found but not expected on "System/Library/User Template/English.lproj/Public".
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "sbin/umount" has been modified and will not be repaired.
Warning: SUID file "bin/rcp" has been modified and will not be repaired.
Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
Permissions repair complete
My concerns are:
* Some of the permissions repaired yesterday appear to have needed to be repaired again today
* There are several files which carry a warning that they won't be repaired as they have been 'modified', and some of these clearly relate to disk management.
Does anyone have any ideas what is going on???
Thanks!!

Many problems with the 10.5.7 update have been fixed by a Restart.
If that doesn't help, something may have gone wrong with the update. Download and install the "combo" update, from: http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
If that doesn't help, try running the Apple Hardware Test, on the disc that came with your computer.
1. Disconnect all external devices (including the Ethernet cable) except the keyboard and mouse.
2. Insert the "Additional Software & Apple Hardware Test" disc that came with your computer.
3. Restart while holding down the "C" key. When the list of available startup volumes appears, click Apple Hardware Test and the right arrow.
4. When the Apple Hardware Test main screen comes up (after a moment), follow the on screen instructions.
5. If it detects a problem, an error code will be displayed. Make a note of it.

Can I use watch folders with my network drive in Photoshop elements 10

Can I use watch folders with my network drive in Photoshop elements 10

photodrawken a écrit:
See the tips in this FAQ:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Watchi ng_Network_Folders
Ken
Beware the FAQ you are referring to is no longer relevant. It does not apply to PSE10
Hereunder the warning issued by the author himself.
Photoshop Elements 6/7/8 (Windows) Frequently Asked Questions (FAQ)
John R. Ellis
Last updated January 21, 2011
Copyright 2008-10 by John R. Ellis
As of June 2010 I no longer maintain this FAQ. I’ve migrated to Lightroom 3, which I use for all my organizing and most of my editing (I still use the Photoshop Elements Editor for more involved editing). Adobe has clearly decided not to invest sufficient resources for properly maintaining the Photoshop Elements Organizer– see my Amazon review of PSE 8. Lightroom is marketed to professionals and prosumers with tens of thousands of photos who demand adequate organizational capabilities, whereas Photoshop Elements is marketed to consumers, most of whom do not want or use the Organizer.
This page captures my answers to frequent questions about Photoshop Elements 6, 7, and 8 (Windows). It’s mostly about the Organizer, since I know the Organizer much better than the Editor.
The versions to which each FAQ applies are indicated with the notation [PSE 6, 7, 8]. If I’m not sure whether something applies to a version, it will be indicated with a question mark, e.g. [PSE 7, 8?].
If you have corrections or suggestions, please email them to john at johnrellis.com.

Mount network drives

Hi,
How can I create a script that will connect to a windows server with a username and password and mount network drives on my desktop, and how do I set this script to automatically run when I login?

Hey guys. I'm glad I found this post. I'm trying for the same result. I currently work at a school in which every teacher has a computer that connects to the local network by signing in with a username and password. However, my computer has fried and they can't get me a new one until... well... whenever. I've brought my MacBook Pro in and have connected to the internet which is great but I need to access a network (H:) drive in order to update progress reports and report cards.
I don't know much and the IT guy is impossible to reach and hasn't returned any emails. I just need to connect to that one folder. I was assuming and ftp or and smb would do the trick but I have no idea what server I would need to try and access through the finder, applescript, or terminal. I did an ipconfig on another teachers computer and got a few ip's as well as the folder's location on the network 'server_4\folder' (H:) if that helps. I've tried connected by ftp through the finder to all of the ip's and have gotten an error saying that I can't connect. I have also did a whatsmyip.com search for my root ip address and have tried the same approach. For some reason, it connects by says my username and password were incorrect.
Well that's about everything. Any help would be greatly appreciated!

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty.

Known issues with the Super Drive on an iMac 2.7 Ghz

Are there any known issues with the Super Drive on an iMac 2.7 that would result in speed issues and a grinding sound?

Vertically installed super slim DVD drives are not as reliable as a plain desktop burner. I've had one fail in two of three iMacs and have always had an external which I use most of the time. Other than that, the brand new iMacs do not have a Super Drive, so if that is what you are inquiring about, the point is moot. You need to buy an external anyway. As far as speed, I have never used a burner at high speed - unless you have a professional model, you can easily get burn errors when burning at a fast speed; sometimes consumer models do well burning with high speeds , other times not.

Complaint: Issue with the Network

Facing issue with the Network for most of the time and sometimes even Data for both 3G and 2G.
My service provider was BSNL, Hyderabad, AP, India-50016
I have check even with my service provider from there they don't have any issue..
But the same works with my old BB8520 and others.
Please can you help me?
BBZ3-STJ100-1 OS V10.2.1.3247

Is it h+ or H+?
I've had similar issues when my sim card was bad. I had cut it down to micro sim size and it worked fine for a month. Then it stopped working in the Z10 but worked in my 9810. Try having your carrier replace your sim card.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Issues with multiple hard drives (no luck searching)

Hi!
I've bought a 5th gen. Airport Extreme, and I have some issues with connecting multiple drives to it.
We've got multiple Macs in the house, and they have all been backed up on separate external hard drives.
One of these drives has been split into two partitions, one for backup and one for data. They are both formatted as GUID HFS+.
I've bought a powered USB-hub, and tried connecting the drives, but it doesn't work.
I get the following results:
- The AEBS only sees one of the drives.
- The AEBS sees neither of the drives.
- Everything seems to work, until I try using Time Machine on one of the drives, and everything stops working.
I've tried unplugging the AEBS, but I get nothing else than these issues.
This is my setup:
The AEBS:
The hub with the drives:
The hub:
I've tried searching numerous sites, but I haven't found an answer.
Some people have had luck downgrading to a previous firmware, but I can't for some reason.
Have any of you got some ideas how to fix it? I think I've tried almost everything.

The drives have been password protected.
I tried adding user accounts for access, but the password setting seemed to work better.

Mounting network drive failing when launched with "crontab"...

Greetings!
Here's my problem:
I have a cron job (domain user) that launch a perl script.
Somewhere in the script, I mount a network drive like this: "/sbin/mount_smbfs //user:pw@machine/path"
I get the following error: mount_smbfs: server connection failed: broken pipe.
-If I ssh to the mac, manually execute the Perl script, no problem, the drive is mounted and I am happy. But it constantly fails if I am not logged in.
As a workaround, I tried to make my user automatically logged in when the Mac restart. But what do you know? Not working with my (domain) user. But it works fine with any other local users.
Any ideas?

Post to the Unix forum under OS X Technologies.

Problem mounting network drive after upgrading router firmware

Hi guys,
It's been a while since I last posted a question of my own here, but I'm at my wits end. As I may have mentioned, I live in France, and my ISP is Free (no, not free, Free...). I've got what they call a "box" here, i.e. a sort of super-modem that will let you connect to the Internet via xDSL (and soon VDSL2), receive hundreds of TV channels, read BluRay discs, store files (videos, music, photos, what have you) on a integrated NAS, place and receive phone calls, whether via a landline (DECT) or, since recently, through a femtocell.
All in all, the package is impressive and works flawlessly. But...
(Of course, there had to be a "but)
... Yesterday, I let my "box" (it's called a Freebox Revolution, or Freebox V6--for Version 6--by the way) upgrade its firmware, reboot as it always does in such circumstances, and since that, the NAS won't mount in the Finder the way it used to under the Shared left pane.
Now, every time I reboot my Mac, I have to open a browser windows and type "smb://mafreebox.freebox.fr" in order mount the NAS in the Finder. I've saved the credentials (login, no password) in the keychain, hoping it would help, but it doesn't. I've got a PC running Windows 8.1 Preview at the moment, and created a shortcut to the NAS on the Desktop. Guess what? I double-click on the shortcut, and sure enough, I can access the content of the NAS from Windows, but not from the Mac.
I must add that I haven't changed anything on the Mac since, or before, upgrading the "box" firmware.
Any ideas?

OK, you must think I'm going bananas, but my issue is gone... For now...
Seriously, what do you guys think about this problem with network drives mounting or not, depending on, I don't know, the weather, maybe?

WatchService issue with Mounted network drive.

Similar Messages

Maybe you are looking for