WCCP is not working after ASR migration is done.

Hi Alls.
We recently migrated with new ASR router. However, WCCP is not working, which is using for WAE traffic redirection.
I checked the WCCP configuration. however, I can't find any issue from wccp configuration on ASR router.
Please have seeing following configuration related wccp.
Global)
ip wccp check services all
ip wccp 61 redirect-list waas-redirect
ip wccp 62 redirect-list waas-redirect
Intf)
interface GigabitEthernet0/0/x
ip wccp 61 redirect out
ip wccp 62 redirect in
show ip access-list waas-redirect)
    270 deny tcp any eq 1719 any
    280 deny tcp any eq 1720 any
    290 deny tcp any eq 8443 any
    300 deny tcp any eq 689 any
    310 permit tcp any any
I confirmed that after migration is done, there was no issue for connectivity between ASR and WAAS.
Following is WAAS status;
Router Information for Service: TCP Promiscuous 61
        Routers Seeing this Wide Area Engine(2)
        Router Id       Sent To
        xxx.xxx.xxx.213  xxx.xxx.xxx.15
        xxx.xxx.xxx.7     xxx.xxx.xxx.139
        Routers not Seeing this Wide Area Engine
                -NONE-
        Routers Notified of from other WAE's
                -NONE-
        Multicast Addresses Configured
Router Information for Service: TCP Promiscuous 61
        Routers Seeing this Wide Area Engine(2)
        Router Id       Sent To
        xxx.xxx.xxx.213  xxx.xxx.xxx.15
        xxx.xxx.xxx.7     xxx.xxx.xxx.139
        Routers not Seeing this Wide Area Engine
                -NONE-
        Routers Notified of from other WAE's
                -NONE-
        Multicast Addresses Configured
I can't find any difference from configuration and issue with connectivity.
Can anyone help to check this issue? let me know if you need more inputs.
Thanks.

Hi Felix,
I'm pasting the show output what you requested.
show ip wccp 61 de)
WCCP Client information:
        WCCP Client ID:          xxx.xxx.xxx.179
        Protocol Version:        2.0
        State:                   Usable
        Redirection:             GRE
        Packet Return:           GRE
        Assignment:              HASH
        Initial Hash Info:       FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
                                 00000000000000000000000000000000
        Assigned Hash Info:      FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
                                 00000000000000000000000000000000
        Hash Allotment:          128 (50.00%)
        Packets s/w Redirected:  0
        Connect Time:            1w3d
        Bypassed Packets
          Process:               0
          CEF:                   0
          Errors:                0
        WCCP Client ID:          xxx.xxx.xxx.178
        Protocol Version:        2.0
        State:                   Usable
        Redirection:             GRE
        Packet Return:           GRE
        Assignment:              HASH
        Initial Hash Info:       00000000000000000000000000000000
                                 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
        Assigned Hash Info:      00000000000000000000000000000000
                                 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
        Hash Allotment:          128 (50.00%)
        Packets s/w Redirected:  0
        Connect Time:            1w3d
        Bypassed Packets
          Process:               0
          CEF:                   0
          Errors:                0
show ip wccp 62 de)
WCCP Client information:
        WCCP Client ID:          xxx.xxx.xxx.179
        Protocol Version:        2.0
        State:                   Usable
        Redirection:             GRE
        Packet Return:           GRE
        Assignment:              HASH
        Initial Hash Info:       FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
                                 00000000000000000000000000000000
        Assigned Hash Info:      FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
                                 00000000000000000000000000000000
        Hash Allotment:          128 (50.00%)
        Packets s/w Redirected:  0
        Connect Time:            1w3d
        Bypassed Packets
          Process:               0
          CEF:                   0
          Errors:                0
        WCCP Client ID:          xxx.xxx.xxx.178
        Protocol Version:        2.0
        State:                   Usable
        Redirection:             GRE
        Packet Return:           GRE
        Assignment:              HASH
        Initial Hash Info:       00000000000000000000000000000000
                                 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
        Assigned Hash Info:      00000000000000000000000000000000
                                 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
        Hash Allotment:          128 (50.00%)
        Packets s/w Redirected:  0
        Connect Time:            1w3d
        Bypassed Packets
          Process:               0
          CEF:                   0
          Errors:                0
Could you check?
Thanks.

Similar Messages

  • Mail not working after using migration assistant - what am I missing?

    Mail not working after using migration assistant - what am I missing?

    The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The  MAILBOXES category can't be hidden.
    In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

  • WiFi not working after Mavericks Migration

    This problem has been discussed a fair bit...but my exact issue is not quite addressed.  I have pretty much the problem dicussed here:
    https://discussions.apple.com/message/23500033#23500033
    Thing is...when I go to my /Library/Preferences folder...I don't see any of the plist files mentioned in this thread.  I do not have
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    Also...when I open up system preferences and, click on "WiFi" and then "Advanced"...I see nothing in the prefered server list.  If I hit the "+" button and add my network...System Preferences hangs and I have to force quit. 
    Do this: 
    1.  Boot into Safe Mode (hold down the shift key while the computer boots up)
    2.  Go into System Preferences --> Network  and click on the bottom button "Assist Me"
    3.  Create a new location.   Choose your Wifi network and password.
    4.  Reboot
    ...also did not work.
    Otherwise, my network is working fine as my other machines are able to access wifi no problem. 
    Help??

    For the benefit of future searchers...I will answer this myself.  I went to the Apple store today.  The plist files I needed to trash were not in the hidden Library directory.  They were lthe Library directory located under the Go menu in the finder labelled "Computer" :
    Macintosh HD/Library/Preferences/System Configuration/
    Once I blew away what was in that folder, emptied the trash, and restarted...all was good. 

  • Free/Busy not working after mailbox migration to Exchange 2013

    I'm in the process of migrating user mailboxes from Exchange 2007 to Exchange 2013
    It seems that many of the users (not all) are having problems seeing free/busy once they have been migrated.  If we remove the Outlook profile and recreate it, all is good.  Problem is that this is happening to more and more people.  Everyone
    is on Outlook 2010
    Test-OutlookWebServices -ClientAccessServer Ex2013 -identity MyName -MailboxCredential $cred    Results in:
     Autodiscover: Outlook Provider Failure
     Exchange Web Services          Failure
     Availability Service           Skipped
     Offline Address Book           Failure
    The same if I run that command against the Exchange 2007 server.
    What am I doing wrong?

    I should have mentioned that.  Yes, OWA works perfectly for the affected users.  Just as deleting their Outlook profile and recreating a new one does.
    Results of Get-WebServicesVirtualDirectory:
    Identity    : Exch2007Srvr\EWS (Default Web Site)
    InternalUrl : https://legacy.company.com/EWS/Exchange.asmx
    ExternalUrl : https://legacy.company.com/EWS/Exchange.asmx
    Identity    : Exch2013Srvr\EWS (Default Web Site)
    InternalUrl : https://mail.company.com/ews/exchange.asmx
    ExternalUrl : https://mail.company.com/ews/exchange.asmx
    The URL you reference above is actually the site I used to perform migration.
    What's interesting (at least to me) is that on my machine I did not have any issues with seeing calendars. The Test E-mail AutoConfiguration (without Guessmart), I get prompted for my password over and over; however, after clicking on cancel I
    get:
    Attempting URL
    https://mail.company.com/autodiscover/autodisconver.xml found through SCP
    Autodiscover to
    https://mail.company.com/autodiscover/autodisconver.xml starting
    GetLastError=0;httpStatus=401
    GetLastError=0;httpStatus=401
    GetLastError=0;httpStatus=401
    GetLastError=0;httpStatus=401
    GetLastError=0;httpStatus=401
    Autodiscover to 
    https://mail.company.com/autodiscover/autodisconver.xml Failed (0x80040413)
    Attempting URL 
    https://autodiscover.company.com/autodiscover/autodisconver.xml found through SCP
    Autodiscover to
    https://autodiscover.company.com/autodiscover/autodisconver.xml starting
    GetLastError=0; httpStatus=200.
    Autodiscover to
    https://autodiscover.company.com/autodiscover/autodisconver.xml Failed (0x800C8203)
    Autodiscover to https://company.local/autodiscover/autodiscover.xml starting
    GetLastError=12029; httpStatus=0
    Autodiscover to https://company.local/autodiscover/autodisconver.xml Failed (0x80004005)
    Autodiscover to
    https://autodiscover.company.local/autodiscover/autodisconver.xml starting
    GetLastError=0; httpStatus=0
    GetLastError=0; httpStatus=200
    Autodiscover to
    https://autodiscover.company.local/autodiscover/autodisconver.xml Failed (0x800C8203)
    Local autodiscover for company.local starting
    Local autodiscover for company.local Failed (0x8004010F)
    Redirect check to
    https://autodiscover.company.local/autodiscover/autodisconver.xml starting
    Redirect check to
    https://autodiscover.company.local/autodiscover/autodisconver.xml Failed (0x800C820D)
    Srv Record lookup for hydraforce.ads starting
    Srv Record lookup for hydraforce.ads Failed(0x8004010F)
    However, when I did this on a system that cannot see any calendars, it all works perfectly.
    Browsing to
    https://autodiscover.hydraforce.com/autodiscover/autodiscover.xml does result in Error Code 600

  • Password not working after using Migration Assistant

    Recycled my MacBook to my wife after reinstalling the OS so that it was a fresh machine. However, she wanted to have family photos /videos  on this machine so she has them locally if she takes machine out of house. So, I used Migration Assistant to transfer these from my mini-mac to the MacBook. Of course this meant I then became a named user the MacBook and the Photos/videos were transferred successfully over to my account.
    When I log into the MacBook using the newly created account for my wife I of course cannot see the files transferred over in her directory but when I use Finder I can view the Users and can see the files have been transferred into my directory.
    If I log out of my wife's acount and try to login to my account my password fails. Pretty sure I'm entering the correct password and the hint comes up with what looks like a valid hint. Can't be 100% sure as have so many passwords but irrespective if also states in the hint message that I can use my Apple ID to reset this passwordh which is what I'd lke to do to avoid confusion
    Going back to the mini-mac I've gone to the Apple ID site (so my password to acccess this works) but cannot see how this allows me to reset a passord for a device.
    Too be honest I thought the password for MacBook was my Apple ID Password but clearly not as it works to get access to manage my Apple ID
    Hopefully I've explained in enough detail but let mw know if more needed

    FIxed it myself. Logged in as wife went to System Prefs > Security and managed to change my passwrod from there. Seems a bit strange but hey it worked

  • KDM not working after systemd migration

    I migrated my running desktop arch installation over to a systemd/initscripts configuration.  sysvinit has been removed and systemd-sysvcompat has been installed as per the systemd article.
    I have everything working as before except for kdm.  Previously I started kdm vis inittab.
    I have followed the instructions in the wiki (https://wiki.archlinux.org/index.php/Sy … er_systemd)
    systemctl enable kdm.service
    (this succeeds)
    I do not have a default.target already set that would cause problems.
    When I reboot the system, I get a text login and nothing on tty7.  If I login as root and run a
    systemctl --all
    it shows that kdm.service has loaded (but I dont see KDM).  If i run
    systemctl stop kdm
    systemctl start kdm
    kdm will loads right up and works fine.
    There isn't much more information in the documentation about this other than to enable the service it and it should work.  Does anyone know why KDM doesn't load up automatically at boot (even though it starts automatically) or how I could further troubleshoot this?

    No luck with the default.target but here was an interesting section I found with journalctl:
    Oct 15 19:20:06 matt systemd[1]: Starting K Display Manager...
    Oct 15 19:20:06 matt systemd[1]: Started K Display Manager.
    Oct 15 19:20:06 matt systemd[1]: Starting Getty on tty1...
    Oct 15 19:20:06 matt systemd[1]: Started Getty on tty1.
    Oct 15 19:20:06 matt systemd[1]: Starting Login Prompts.
    Oct 15 19:20:06 matt systemd[1]: Reached target Login Prompts.
    Oct 15 19:20:06 matt winbindd[247]: [2012/10/15 19:20:06.265774,  0] winbindd/winbindd_cache.c:3147(initialize_winbindd_cache)
    Oct 15 19:20:06 matt winbindd[247]: initialize_winbindd_cache: clearing cache and re-creating with version number 2
    Oct 15 19:20:06 matt smbd[248]: [2012/10/15 19:20:06.326121,  0] smbd/server.c:1109(main)
    Oct 15 19:20:06 matt smbd[248]: standard input is not a socket, assuming -D option
    Oct 15 19:20:06 matt systemd[1]: Started Login Service.
    Oct 15 19:20:06 matt systemd[1]: Starting Multi-User.
    Oct 15 19:20:06 matt systemd[1]: Reached target Multi-User.
    Oct 15 19:20:06 matt systemd[1]: Starting Graphical Interface.
    Oct 15 19:20:06 matt systemd[1]: Reached target Graphical Interface.
    Oct 15 19:20:06 matt systemd[1]: Starting Update UTMP about System Runlevel Changes...
    Oct 15 19:20:06 matt systemd-logind[249]: Watching system buttons on /dev/input/event5 (Power Button)
    Oct 15 19:20:06 matt systemd-logind[249]: Watching system buttons on /dev/input/event4 (Power Button)
    Oct 15 19:20:06 matt systemd-logind[249]: New seat seat0.
    Oct 15 19:20:06 matt systemd[1]: Started Update UTMP about System Runlevel Changes.
    Oct 15 19:20:06 matt systemd[1]: Startup finished in 3s 75ms 868us (kernel) + 694ms 214us (userspace) = 3s 770ms 82us.
    Oct 15 19:20:06 matt winbindd[247]: initialize_winbindd_cache: clearing cache and re-creating with version number 2
    Oct 15 19:20:06 matt smbd[248]: [2012/10/15 19:20:06.326121,  0] smbd/server.c:1109(main)
    Oct 15 19:20:06 matt smbd[248]: standard input is not a socket, assuming -D option
    Oct 15 19:20:06 matt systemd[1]: Started Login Service.
    Oct 15 19:20:06 matt systemd[1]: Starting Multi-User.
    Oct 15 19:20:06 matt systemd[1]: Reached target Multi-User.
    Oct 15 19:20:06 matt systemd[1]: Starting Graphical Interface.
    Oct 15 19:20:06 matt systemd[1]: Reached target Graphical Interface.
    Oct 15 19:20:06 matt systemd[1]: Starting Update UTMP about System Runlevel Changes...
    Oct 15 19:20:06 matt systemd-logind[249]: Watching system buttons on /dev/input/event5 (Power Button)
    Oct 15 19:20:06 matt systemd-logind[249]: Watching system buttons on /dev/input/event4 (Power Button)
    Oct 15 19:20:06 matt systemd-logind[249]: New seat seat0.
    Oct 15 19:20:06 matt systemd[1]: Started Update UTMP about System Runlevel Changes.
    Oct 15 19:20:06 matt systemd[1]: Startup finished in 3s 75ms 868us (kernel) + 694ms 214us (userspace) = 3s 770ms 82us.
    Oct 15 19:20:06 matt smbd[266]: [2012/10/15 19:20:06.499229,  0] printing/print_cups.c:151(cups_connect)
    Oct 15 19:20:06 matt smbd[266]: Unable to connect to CUPS server /var/run/cups/cups.sock:631 - No such file or directory
    Oct 15 19:20:06 matt smbd[248]: [2012/10/15 19:20:06.499462,  0] printing/print_cups.c:528(cups_async_callback)
    Oct 15 19:20:06 matt smbd[248]: failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
    Oct 15 19:20:06 matt kernel: firewire_core 0000:04:00.0: created device fw0: GUID 0010dc00019a91af, S400
    Oct 15 19:20:06 matt kdm[255]: X server died during startup
    Oct 15 19:20:06 matt kdm[255]: X server for display :0 cannot be started, session disabled
    Oct 15 19:20:06 matt kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input15
    Oct 15 19:20:06 matt kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input16
    Oct 15 19:20:06 matt kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input17
    Oct 15 19:20:06 matt kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input18
    Oct 15 19:20:06 matt kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    Oct 15 19:20:06 matt kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.51  Tue Sep 18 17:16:56 PDT 2012
    It seems that systemd is trying to load KDM before the nvidia driver is loaded.
    How can I rearrange the boot order to correct this?  I thought systemd was supposed to figure out the order automatically.
    Last edited by mattbarszcz (2012-10-15 23:30:39)

  • Tags do not work after a migration?.. How do I make it to work again..

    I've bought a new computer and I've restored my Data using the migration utility. Even thought both computer were running the same IOS version (10.9.3) Tags does not seem to work on the new computer... Anyone out there have faced same issued. How do I make it to work?....
    Thanks!

    I reply myself....Delete and reassign Tags.... Works again

  • MBP USB 3.0 not working after profile migration

    I just bought the new MBP with USB 3.0 and once the installation is fresh my USB 3.0 Lacie Minimus HDD connects at a speed of up to 5Gb/s (as in System Report) and disk speed shows transfer at around 73MB/s. However, once I migrate my data from iMac (mid 2011) the new MBP changes the link speed to up to 480 Mb/s and the disk speed drops to 23MB/s.
    Any ideas?

    azdebel wrote:
    ...the drive was working as expected (USB 3.0 link) once I was using it on plain (new) instalation. Only after I updated the data on MBP (using migration assistant, in order to copy my profile from my iMac) the speed dropped...
    The reason I ask is that some MBP users are finding they can only get a USB 2.0 connection, others can't connect at all, and still others have no problem. Indeed, ZDNet just posted a story on the issue: http://www.zdnet.com/blog/apple/problems-reported-mounting-usb-30-external-drive s-on-new-macbooks/13188
    But it sounds like something that wasn't present on your out-of-the-box MBP was imported during migration, and the before-after change might shed some light on where to look for the problem.

  • Gmail not working after data migration

    Migrated data from old (2010) macbookpro with maverics to "new" (2011) macbook pro with maverics and now gmail doesn´t work. The inbox is empty. Have tried to rebuild mail and restart computer. Both computers are updated. Gmail worked fine on old macbook pro with maverics. Have done migration from time machine to new computer (with backup from old computer). The "show in IMAP" setting in Gmail account is selected and I have tried to deselect and reselect it agian. Nothing I have tried works.
    Any ideas?

    I'm not. Have you tried posting in Gmail's forum area - http://www.google.com/support/forum/p/gmail?hl=en&utmsource=HC&utm_medium=leftnav&utmcampaign=gmail ?

  • Wikis not working after a migration

    I migrated to a reinstallation (10.6.2.>>>10.6) and wikis have stopped working.
    "Service unavailable" - any thoughts?

    thanks
    definitely running and no entries in logs (presumably as I dont get as far a logging in page.)
    In console I do get this error
    27/01/10 11:42:44 AM com.apple.wikid[77407] File "/usr/share/caldavd/lib/python/twistedcaldav/config.py", line 34, in <module>
    27/01/10 11:42:44 AM com.apple.wikid[77407] from twistedcaldav.log import Logger
    27/01/10 11:42:44 AM com.apple.wikid[77407] ImportError: cannot import name Logger
    27/01/10 11:42:44 AM com.apple.launchd[1] (com.apple.wikid[77407]) Exited with exit code: 1
    27/01/10 11:42:44 AM com.apple.launchd[1] (com.apple.wikid) Throttling respawn: Will start in 10 seconds

  • Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

    Dear Gurus,
    Need your help regarding the following problem:
    After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
    66 : 2 : "Ctrl+B" : 70 : "Block Menu"
    Additional Information:
    OS: AIX
    NLS_LANG = UTF8
    fmrweb_utf8.res also contains the same text for Ctrl+B as above.
    I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
    Best Regards,

    Dear Gerd,
    "are you sure, that it is the hotkey"
    Yes, i am dead sure. Since:
    (1) It was working fine in forms 6i
    (2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
    The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
    Regards

  • "Find Form" calendar is not working after migration

    Hi,
    We have migrated from Oracle 9i to 10g.we have one form ''FormA" and "find form" for that FormA.Calendar functionality is present in both FormA and "Find FormA".if we try to use calendar functionality in "Find formA",its giving error like FRM-40104 - No such block calendar,FRM-40105(unable to resolve reference to item claendar.cell1.........),FRM-41045 (cannot find item - invalid id).Actually this scenario is not working after migrating the FORMS application to 'OAS10.1.2' from 'OAS904' .
    In 'OAS904' ,The calendar item is present in the 'FormA' form, the 'calendar.show' hides the "Find FormA" and appears in the FOrmA and uses FormA's calendar item and after selecting the date,the date s applied to the "Find FormA"
    But after migration, the "Find FormA" is not hiding, so its not able to retrieve the calendar properties.Because the calendar is present in "FormA".
    Any problem with pll files like 'qmslib65','qmsolb65',qmsevh65'??
    please help me by providing suggestions.
    Thanks

    qmslib65','qmsolb65',qmsevh65Are these libraries self-written or from some third-party tool?

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • ISight not working after screen repair

    My iSight is not working after a screen repair (which was damaged during Apple fixing the topboard!). Could it be possible that the camera is damaged in some way during a screen being replaced? I am a bit annoyed that they did not check the machine after all of teh repairs were made as I have a number of adverse issues with it now.
    Has anyone else experience this after a screen replacement? I get the message that there is no camera attached, or that it is in use. I have followed threads regarding checking login items etc, to no avail.
    The iSight is important to me as I am a long way from home. It is annoying that something seems to go wrong with the MacBook, when I most need it.

    When an iSight isn't working, there are a variety of simple things you can try (see further below), but one thing few people think of, is to connect a Firewire or USB drive that contains a bootable system, which has previously been tested on a known-good Mac to make sure the iSight works when booted from that drive, and see if the problem still occurs with the Mac that's under test. That's a quick way of testing whether the problem is hardware or software.
    Other things to try:
    - Reset PRAM, NVRAM, and Open Firmware.
    - Reset your Mac's SMU--see documentation for your Mac for specifics.
    - Repair permissions.
    - Make a new user account, and see if it happens there.
    - Check Login Items in the Accounts prefpane for anything that might be causing the trouble, like printer or scanner items.
    - Try what's suggested at www.eriymati.com.ar/isight/
    - Reset the printing system in Printer Setup Utility, since some printer/scanner drivers can stop the iSight from working--if that helps, see if your printer/scanner can work with OS X's built-in drivers; if it can't, download the latest driver for your printer/scanner from its manufacturer's web site, and see if that allows the printer/scanner to work, without interfering with the iSight, but some manufacturers, including HP, Epson, etc. are still dragging their feet about making such drivers. If the printer/scanner driver still causes trouble, uninstall it, then replace the printer/scanner with one whose manufacturer has enough brains to write a driver that doesn't interfere with the iSight (some specifically state now, in their System Requirements, that they don't work with Macs that contain built-in iSights, so check this before you buy another printer/scanner).
    Sometimes a non-working iSight is caused by something wrong at a "deep" System level (meaning, it might be caused by a single bad or missing file, but it might take days to find it)--if you find that to be the case, the quickest fix if you find the steps above (and others described here and elsewhere), is to reinstall OS X, either by doing an Archive and Install, or by making a bootable backup of the drive, erasing it, then using Migration Assistant to copy the data from the backup.

  • Tecra M7: Tablet does not work after lid closing

    Has anyone had problems with the tablet not working after closing the lid on a Tecra M7? Bios is 3.20
    Doesn't seem to happen on hibernate or sleep.
    I have the lid set to do nothing on close.

    Hi
    What do you mean with tablet not working after closing the lid?
    Does the notebook freezes or what?? What happens exactly???
    The close the lid settings can be set to hibernation mode or standby mode or no action.
    These settings can be set in the power saver setup actions.
    If you have some problems with some installed Toshiba applications I would recommend reinstalling the TOSHIBA Common Modules and the program which doesnt run correctly!
    Best regards

Maybe you are looking for