WCS: AP / MSE Authorization Controller Template via CSV file???

hello experts we are required to create a large number of "AP / MSE Authorization Controller Templates" on a WCS 7.0.172.0 system. ideally we would like to create these templates via CSV file to make the import as easy as possible. when the import is done via csv file the name of the template is automatically being set to the mac address of the access point. this because there is not way (at least not in the documented example) on how to specify the template name in the CSV file. so the question is, if anybody knows how we can specifiy the template name during the csv templated based creation in order to make sure we have the APs hostname set as the name of the template. further usage will be much more easy when the template has the AP hostname. any suggestion is highly welcome many thanks

Stephen,
debug mac add  00:19:55:5f:cc:fa is empty and
(Cisco Controller) >show interface summary
Interface Name                   Port Vlan Id  IP Address      Type    Ap Mgr Guest
ap-manager                       1    2        10.148.0.4      Static  Yes    No
management                       1    untagged 10.148.0.3      Static  No     No
virtual                          N/A  N/A      1.1.1.1         Static  No     No
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >show interface detailed management
Interface Name................................... management
MAC Address...................................... 64:00:f1:91:4f:80
IP Address....................................... 10.148.0.3
IP Netmask....................................... 255.255.255.192
IP Gateway....................................... 10.148.0.1
VLAN............................................. untagged
Quarantine-vlan.................................. 0
Physical Port.................................... 1
Primary DHCP Server.............................. 10.16.16.225
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No
Guest Interface.................................. No
(Cisco Controller) >

Similar Messages

  • Passport - Import Contacts Via CSV file

    Just got my Passport yesterday... love it.  i took a small break from BB but now i'm BACK.. awesome.
    i've exported all my contacts to a CSV file but cannot seem to find how to import them via Blend.
    is there a process for this?  i have hundereds of business contacts that need to be in my phone.
    Please help.
    thank you

    The best way to do it would be to import those contacts into an email account like Outlook.com and then sync that account's contacts to the Passport. Once in Outlook.com you can have those contacts on any device.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Dynamic Distribution Group via csv file and Recipient Filter

    Hello,
    I am trying to create powershell command that will read a CSV file for "Name" and "Dept" and create a Dynamic Distribution Group based on the following Recipient Filter.
    Import-CSV Dist.csv | ForEach-Object {New-DynamicDistributionGroup -Name $_.Name -RecipientFilter {((((((Department -like $_.Dept) -and (RecipientType -eq 'UserMailbox'))) -and (UserAccountControl -ne 'AccountDisabled, NormalAccount'))) -and (-not(Name -like
    'SystemMailbox{*')) -and (-not(Name -like 'CAS_{*')))}
    I keep getting an error that "Missing closing '}" in statement block Char:314.  I added a "}" at the end of the command but then the command fails to read the .csv file.
    Assistance would be greatly appreciated to determine what I am missing.  I have over 100 Dynamic Distribution list to create.
    Cheers

    You're definitely missing a closing curly bracket.
    You have a lot of superfluous parentheses in that expression.  You could certainly simplify it.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Import my addresses into mac mail via .csv file

    i would like to import my addresses into mac mail.
    i have my yahoo addresses saved on my desktp as a .csv file. can you tell me how to import these
    thank you

    You cannot import addresses into Mail. You must import them into Address Book for them to be available in Mail. Open Address Book, then Help > Address Book Help, and read the “Importing contacts into Address Book” article to see how this works.

  • Importing addresses to mac mail via csv file

    i would like to import my addresses into mac mail.
    i have my yahoo addresses saved on my desktp as a .csv file. can you tell me how to import these
    thank you

    The forum for Mail issues is here:
    http://discussions.apple.com/forum.jspa?forumID=753

  • Customer and Order import via CSV (webshop to Business One Import)

    I have an Oscommerce website that is currently processing around 200 orders aday.
    Its a ballache to say the least to create 200 customers and then create 200 orders.
    The website can export the orders in a csv file (Im sure all be it with the wrong fields)
    Does Business One have the ability to batch import customers and orders? can someone give me a pointer of where to start looking.
    Also to start me off, if it is possible, would I have to create the customer accounts first and then import, or can it all be done with on import combined
    Thanks
    Tim Guy

    Tim Guy,
    Yes. You can use DTW (Data Transfer Workbench) to import via CSV files.  You need to files one by one.  One is oBusinessPartner for Customer accounts. The other is oOrder for Sales Orders.
    Thanks,
    Gordon

  • How to handle ' " '(double quotes) in .csv file during migration

    I am facing problem in migrating data from sql server 2000 into oracle via .csv file using sql loader.
    1>How should i migrate the string which contains ' " ' (double quotes) characters,
    as i am enclosing the string in ' " ' in .ctl file (enclosed by ' " ').
    is there any syntax in the control file which can migrate the ' " '(double quotes) as it is as the data in the files is 50000 records .?
    Thank you..

    Yes this is correct.
    but problem will occur when e.g check the foll. string.
    (1001,And I quote "This, will work")
    Here it is a comm(,) in b/w "This and will".
    due to this sqlldr interpret it as end of field. and throws an error.
    I had gone through expert one on one oracle, what it maintioned as,
    put an extra double quotes( " ) like " " to enclosed the double quoted string.
    This works fine. For small data it can be done manually.
    But for large data what condition can be put in the ctl file to achieve this?
    or is there any other way to achieve this?
    Thank you.

  • Prime Infrastructure 2.1.1 cannot add more than two interfaces in Dynamic Interface Controller Templates

    Cisco Prime Infrastructure is a damned nightmare of browser bugs (some features work in IE8, some in IE9, and some only in Firefox).  And I am not sure if what I am experiencing is a browser bug - or a real bug - or something that I was able to do before and can't any more?  I would love for someone to either explain why this is happening to me, or reproduce the bug!
    I'm running Prime 2.1.1.  I am doing this ...
    Configure > Controller Template Launchpad
    System > Dynamic Interface
    Select a command > Add interface (GO)
    Enter all the properties - roll to the bottom of the page, and click Apply to Controllers
    I have four controllers.  And normally I would add an interface for each controller.  But I can only create two out of the four.  It doesn't matter which two I choose.  When I click Add under Manage Interfaces for the third controller, I cannot click the Done button to apply it (see screenshot, attached).  I have found that if I change the VLAN to something else, it will let me save it.  But ... why?  I went back and reviewed all of my existing interface templates and I am not doing anything different.  Although, they were all created a long while ago using WCS 7.x.
    Any help, guidance, or confirmation of insanity would be appreciated.
    -Steve Ballantyne

    I doubt I will get any hits on this here but I always try.  I opened a TAC case.  I will come back and comment on whatever they find.

  • A question and out CA 'domain controller' templates, and kerbros/KDC in general

    Hello All
    Can someone please help me with the following question. This may be two questions (so if you think I have to post separately please let me know).
    I was reading an MS article called "Active Directory Domain Controllers and Certificate auto-enrolment" which was very helpful but through up some questions too.
    for example the article talks about a 'template' called 'Directory E-mail Replication' what is this? in other words we have all heard of MS Exchange for corporate email, but the name of this template seems to suggest 'Domain Controllers' send e-mails to
    reach other? (over and above their normal AD replication) or is this template used for sending AD replication data via SMTP rather than RPC (which is something I have never heard of). Can someone please explain the purpose of this template, thanks very much.
    Also I want to understand the relationship (if any) between these Domain Controller PKI templates and Kerberos in general (can someone point me to a white paper of good blog article)
    For example my understanding at the moment if Kerberos is basically a 'symmetric'  key encryption system where by the KDC (Key Distribution Center) take care of administering all these symmetric key pairs, is this basic premise
    correct?
    I understand (at a very basic level) to concept of Kerberos TGT and TST (ticket granting ticket and ticket service ticket) and the fact the client cannot read the contents of either of these (rather the KDC is the trust anchor and deals with all the encryption
    and description of the keys to provide/proof identity authentication, and the client simply presents these tickets)
    Hopefully the above is correct (or on the right lines), what I do not understand is how this (Kerberos/KDC) relates to DC's and their 'Domain Controller' templates or how these Domain Controllers use the certificates generated from these templates for encryption
    (I presume to encrypt the AD sync traffic, but isn't this done via Kerberos).
    Also AD CA is optional component therefore my logic suggests there should be no relation to these Domain Controller templates and Kerberos
    As you can see I have some fundermental gaps in my knowleague and would really appreciate someone helping me out here
    Thanks very much
    AAnotherUser__
    AAnotherUser__

    Re the template Directory E-mail Replication.
    Yes, you are right - these are only used for (optional) AD replication via SMTP, and yes this is rather uncommon. I have only encountered this type of replication in a few environments with very specific - and historically grown - firewall and trust requirements.
    Re Kerberos and certificates:
    My favorite white paper is this:
    Windows Vista Smart Card Infrastructure. See especially the details of how Kerberos is used with smart cards as depicted in Figure 16 and the text below.
    When users use smartcards to logon to their computers they authenticate to DCs and DCs authenticate to them. So DCs also need certificates.
    See
    RFC 4556 for details of how public key cryptography is used to protect the Kerberos protocol.
    So in summary certificates are used for authentication and encryption.
    You are right that otherwise - if you don't use smart card logon for users - DC certificates are optional and not needed to do default Kerberos authentication.
    Another reason DC certificates are often deployed is for allowing LDAP browsers and other management tools to connect to AD via LDAPs.
    Elke

  • PowerShell - Bulk-New-ADUser Creation via a csv file

    This script creates bulk AD users via a csv file. The script creates & configures the user accounts correctly even though the following error message appears. How can I correct this?
    Set-Locaiton : Cannot find path 'AD:Mydomain,OU=MyDomain,DC=My,DC=Domain,DC=org' because it does not exist.
    Import-Module ActiveDirectory
    $csv = Import-CSV -Path "C:\Temp\CreateUsers.csv"
    cd AD:
    set-location -path "OU=MyDomain,DC=My,DC=Domain,DC=org" -PassThru
    foreach($Item in $csv){
    $newUserID=@{
    Name=$item.userID
    Description=$item.description
    GivenName=$item.UserID
    surName=$item.UserID
    DisplayName=$item.UserID
    UserPrincipalName=$item.UserID + "@MyDomain.org"
    EmployeeID=$item.Owner
    ScriptPath="login.cmd"
    Try{
    New-ADUser @newUserID -ErrorAction Stop -AccountPassword (ConvertTo-SecureString $Item.Password -AsPlainText -Force) -PassThru
    Enable-ADAccount -Identity $item.userID
    Set-ADUser -Identity $item.userID -ChangePasswordAtLogon $true
    Write-Host "UserID $($item.UserID) created!" -ForegroundColor green
    Catch{
    Write-Host "There was a problem creating UserID $($item.UserID). The account was not created!" -ForegroundColor Red
    set-location -path "c:\temp"
    mamadukes

    Slight variation, populated from the AdventureWorks SQL database rather than a CSV
    Import-Module "SQLPS" -DisableNameChecking
    New-PSDrive -Name AWDB -PSProvider SQLServer -ROOT SQLSERVER:\sql\localhost\default\databases\adventureworks2012
    Set-Location AWDB:\Tables
    $SQLText = "SELECT e.BusinessEntityID, p.Title, p.FirstName, p.MiddleName, p.LastName, p.Suffix, "+
    "e.JobTitle, d.Name AS Department, d.GroupName, edh.StartDate, e.LoginID"+
    " FROM HumanResources.Employee AS e"+
    " INNER JOIN Person.Person AS p ON p.BusinessEntityID = e.BusinessEntityID"+
    " INNER JOIN HumanResources.EmployeeDepartmentHistory AS edh ON e.BusinessEntityID = edh.BusinessEntityID"+
    " INNER JOIN HumanResources.Department AS d ON edh.DepartmentID = d.DepartmentID"+
    " WHERE (edh.EndDate IS NULL)"+
    " AND (p.FirstName ='Brian')"
    $Query = Invoke-SQLCmd -Query $SQLText
    $Password = "P@assword1"
    foreach($Item in $Query)
    $LoginID=$Item.LoginID
    $LoginID="CORP\"+($LoginID).Substring(16)
    $newUserID=@{
    Name=$item.FirstName+$Item.LastName
    Description="This is a test of a bulk user add"
    GivenName=$item.FirstName
    Surname=$item.LastName
    DisplayName=$item.FirstName+" "+$Item.LastName
    UserPrincipalName="$($item.FirstName+"."+$Item.LastName)@corp.contoso.com"
    EmployeeID=$item.BusinessEntityID
    ScriptPath='login.cmd'
    Company="Contoso"
    Department=$Item.Department
    EmailAddress="$($item.FirstName+"."+$Item.LastName)@corp.contoso.com"
    Title=$Item.JobTitle
    $TargetOU="OU="+$item.Department+",DC=corp,DC=contoso,DC=com"
    Try{
    $newUserID
    New-ADUser @newUserID -Path $TargetOU -ErrorAction Stop -AccountPassword (ConvertTo-SecureString $Password -AsPlainText -Force) -Passthru
    Enable-ADAccount -Identity $newUserID.Name
    Set-ADUser -Identity $newUserID.Name -ChangePasswordAtLogon $true
    Write-Host "UserID $($newUserID.Name) created!" -ForegroundColor green
    Catch{
    Write-Host "There was a problem creating UserID $($item.UserID). The account was not created!" -ForegroundColor Red
    No need to be on the PSDrive AD:, the OU can be specified in the Path parameter in the New-ADUser.
    This was done on a member server with SQL Server (not a domain controller).
    Thanks for your help

  • How do I upload a CSV file with embedded quotation marks into a table via ETL

    I'm having a problem importing a CSV file via ETL that contains double-quotes, and prior solutions aren't helping.  My data looks like this:
    A
    B114SA                             
    CHLORASCRUB SWAB INS SUBASSEMB                  
    A
    S273SA                             
    CHLORASCRUB MAXI INS SUBASSEMB                    
    A
    2AB286                             
    WEB ZEE ANTISEPT 5410\4.5" CD                     
    A
    2AB512                             
    WEB PDI PVP IODINE PREP PAD 3870/4.5              
    A
    2AB542                             
    WEB ZEE CLEAN WIPE NP5410/4.5                     
    If I set the "Text Qualifier" to ' " ', then run it, it falls over on the third row, with the following error:
    - Executing (Error)
    Messages
    Error 0xc0202055: Data Flow Task 1: The column delimiter for column "Column 2" was not found.
     (SQL Server Import and Export Wizard)
    Error 0xc0202092: Data Flow Task 1: An error occurred while processing file "H:\AS400_file_transfers\LIMS\ACTITEMPF.CSV" on data row 3.
     (SQL Server Import and Export Wizard)
    Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on component "Source - ACTITEMPF_CSV" (1) returned error code 0xC0202092.  The component returned a failure code when the pipeline engine
    called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
     (SQL Server Import and Export Wizard)
    Any help?

    Full support for embedded quotes was added in SSIS 2012.
    Which version are you using?
    http://blogs.msdn.com/b/mattm/archive/2011/07/17/flat-file-source-changes-in-denali.aspx

  • I was using a ps3 controller connected via usb as a gamepad when I had Snow Leopard installed - the other day I downloaded Mavericks and now it no longer works. Solutions?

    I moved from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Apple support won't help because it's not their hardware. It's not a playstation controller, it's Spartan brand, and it never connected via bluetooth (it continues to not connect via bluetooth in Mavericks which is fine). I always just plugged it in and it ran because apparently Apple included drivers for it from Snow Leopard onward. However, in Mavericks that's not the case, as when I plug it in nothing picks it up, and when I tried to connect it via bluetooth I would enter the pairing code and then it wouldn't pair. Anyone got any thoughts/ideas?

    Thanks for no help. Such a supportive community. I figured it out on my own. I can only connect it via usb cable (which I'm happy with) and in order to do that I had to go through the bluetooth connection steps for some reason. It doesn't show up as paired but I did the steps outlined in this video - http://www.youtube.com/watch?v=Efk77f6d98Y -, plugged the controller in via usb cable and then it worked.

  • Can not authorize my computer via ADE

    I created an Adobe ID, but as soon as I try to authorize my computer via ADE, I get a error message my login data for Adobe are not correct. How can I solve this problem? Thanks, Michael

    Open itunes
    Click the word Store at the top of your computer screen ( next to File, View, etc.)
    Click Authorize

  • How to import images from web via CSV in Indesign CS4?

    Hi,
    I am using Indesign CS4 and i want to import pictures from my homepage.
    I have a CSV export from a database with products and the url to the
    product picture. I want to import the information for the products and
    the picture via data merge. I added the @ in the name of the column
    where the url to the pictures is. Everything works perfect when I use
    a lokal path, but I need to get the pictures from the website.
    Is it possible to import pictures from a website via CSV data merge?
    What steps are needed for that?
    Would be great if you could help me.
    Best Regards.

    thank you all for your answers, that was what i thought.
    yes, it starts with http://domainnaime.... it's from an extern webspace
    then i will backup all pictures and put them in the local network and try over ip-address if that also won't work then I'll copy then locally
    altough, it would be great if it works via ip-address

  • CSV file template for Uploading PO confirmaiton

    Dear all,
    We have activated Badi for Upload PO confirmations for a supplier in SNC 7.0.
    Request if any of you can please let me know where can I find the CSV upload file template.
    Thanks,
    mahesh.

    Hi Mahesh,
    You can download the CSV file from Tools-->Download center(select purchase order confirmation.
    To create a purchase order confirmation, you enter X in the To Be Confirmed column of the schedule line. If the schedule line has an X, you can change the following data:
    ■Quantity
    ■Delivery date
    Note
    Depending on the system set-up, for example if you have set up Customizing for POs to allow shipping dates to be used instead of delivery dates, you can change the shipping date.
    End of the note.
    ■Confirmed price
    Note
    If you leave the Confirmed Price field empty in all schedule lines of an item, the requested price is used. If you enter a value in the Confirmed Price field of one of the schedule lines, or in more than one schedule line, but those values are the same, the system uses that value as the confirmed price for the item. However, if you enter two or more different confirmed price values in the schedule lines of an item, the system regards this as an error, and the item is not processed.
    End of the note.
    ■Confirmed MPN
    ■Confirmed Mfr
    ■To reject the PO item, you enter an X in the To Be Rejected column of the schedule line that has an X in the Requested column.
    Now upload this file in Tools->upload center.
    See the below link for more information.
    http://help.sap.com/saphelp_snc70/helpdata/EN/b4/79223dc5b54b36899ea4f731a712f6/frameset.htm
    Regards,
    Nikhil

Maybe you are looking for