We have 4000 transports...would like to know the best methods of transports
We have 4000 transports...would like to know the best methods of transports.I understand mass transports and consolidation of transports through transport organiser can be of help ..However would like to understand more on the following points
1)In both the cases, how dependencies between transports will be managed.
2)How Sequencing will be managed?
3)Which is recommended and under what circumstances?
4)Pros and cons of each?
Thanks
Shamna
Have those transports already be transported (e.g. from Dev to Test?) - if so the transports from Test to Prod must be in the exact same sequence you transported them into Test because only then the coding status will be exactly the same.
If there was no transport yet then you usually transport in the sequence of the transport numbers - however if they have not yet been transported you don't know, if there are dependencies between different transports unless you kept a kind of log.
In that case the savest way to transport everything is to combine all objects of all transports into one transport and then let that one run into Test and Prod. That way you would not have to worry about sequence problems where a newer version is overwritten by an older version.
However the big transport only works if all the objects in those 4000 transports are not locked in any open request. You can create that transport by using SE03 and choosing 'Merge Object Lists' - just paste all the transports into the selection field and execute. You don't have to do all 4000 at once but do it in packages.
Hope that helps,
Michael
Similar Messages
-
I would like to know the best way to scan music into a pdf format which I can then sync with ipad
I would like to know the best way to scan music into a pdf format which I can then sycn with ipad
smgchandler,
Any camcorder that can connect via USB or that can save to an SD card can interface with an iPad if you have the iPad Camera Connection Kit so that you can watch your videos on the new iPad's beautiful retina display. You can find this on the Apple website or in most big box retail stores.
http://store.apple.com/us/product/MC531ZM/A?fnode=MTc0MjU4NjE -
I would like to know the step by step procedure for innterplant
Hi Gurus,,
I would like to know the procedure for stock transport order / service order for text item / services.This needs to be between the plants within same company code..I have already set up procedure for stock trasnport order for materials ,which works fine.
Thanks in advance
Regards,
Niitn Amritkarmake sto with me21n, document type UB
goto vl10b and creat delivery document with reference to that sto
goto vl02n check the incompletenss, delivery , picking and make post goods issue
go to migo and make goods receipt with reference to out bound delivery document.
maintain shipping point determination for your site at spro
maintain same sales area for supplying and receiving plant,
delivery type should be NLCC
customization reqired.
spro: mm > purchasing > purchase order > set up for stock transfer order.
make all settings here. -
Hi, I am wanting to wirelesslessly play music form my imac to other rooms in the house. I have wifi and would like to know what speakers to buy and what else I need
Hi, I am wanting to wirelesslessly play music form my imac to other rooms in the house. I have wifi and would like to know what speakers to buy and what else I need
-
Is there google maps data available for Chad, Africa ? I am trying to see where a relative is who works for an Non profit organization there, i have the privacy agreement to do so. In case they are kidnapped there, i would like to know the last position. I am getting an error that google maps is not available so i asusme there is no map data. Wout it be at least for such cases be possible to get longitude and latitude instead of nothing ?
Thanks for ideas / suggestionsOh no... NOT THE 99-PAGER!!! Anything but THAT!!!
-
Hello! I would like to know the procedure to turn a word document into a PDF document via Adobe Reader. Do I have to pay for it or just sign up? Thank you in advance.
"...the procedure to turn a word document into a PDF document via Adobe Reader."
Not possible.
No version of Adobe Reader can:
--| create PDF
--| manipulate PDF page content
--| export PDF page content
Adobe Reader XI does provide a "connection" to various Adobe hosted online subscription services (that are under "acrobat.com").
There is a subscription services can create PDF from supported file formats that are uploaded to the service.
This subscription service is "PDF Pack".
With an active (paid up) subscription to a service one can make use of the service.
Be well... -
I would like to know the role of the each thread on coherence
Help me.
I would like to know the role of the each thread on coherence.
There are too many kind of threads.
Example ~
GC Slave GC Slave RUNNABLE
RMI TCP Accept-1972 RMI TCP Accept-1972 RUNNABLE
Health Center trace subscriber Health Center trace subscriber RUNNABLE
LT=0:P=342534:O=0:port=55170 LT=0:P=342534:O=0:port=55170 RUNNABLE
Attach API wait loop Attach API wait loop RUNNABLE
PacketListener1 PacketListener1 RUNNABLE
PacketListener1P PacketListener1P RUNNABLE
PacketListenerN PacketListenerN RUNNABLE
Cluster|Member(Id=1, Timestamp=2013-04-05 10:45:44.655, Address=192.168.240.157:8088, MachineId=50044, Location=site:,machine:TMTEST-PC,process:5316, Role=CoherenceServer) Cluster|Member(Id=1, Timestamp=2013-04-05 10:45:44.655, Address=192.168.240.157:8088, MachineId=50044, Location=site:,machine:TMTEST-PC,process:5316, Role=CoherenceServer) RUNNABLE
RT=0:P=342534:O=0:TCPTransportConnection[addr=192.168.240.157,port=55178,local=55170] RT=0:P=342534:O=0:TCPTransportConnection[addr=192.168.240.157,port=55178,local=55170] RUNNABLE
Finalizer thread Finalizer thread RUNNABLE
WT=10 WT=10 RUNNABLE
main main TIMED_WAITING
IpMonitor IpMonitor TIMED_WAITING
Invocation:Management:EventDispatcher Invocation:Management:EventDispatcher TIMED_WAITING
Invocation:Management Invocation:Management TIMED_WAITING
DistributedCache DistributedCache TIMED_WAITING
JMX server connection timeout 52 JMX server connection timeout 52 TIMED_WAITING
RMI Scheduler(0) RMI Scheduler(0) WAITING
Thread-6 Thread-6 WAITING
stop JMX Server on shutdown stop JMX Server on shutdown WAITING
Logger@9228429 3.7.1.7 Logger@9228429 3.7.1.7 WAITING
PacketReceiver PacketReceiver WAITING
PacketPublisher PacketPublisher WAITING
PacketSpeaker PacketSpeaker WAITING
WT=7 WT=7 WAITING
WT=9 WT=9 WAITING
-----------------------------------------------------------------------------------------------------------------------------------------------Briefly
PacketListener1 PacketListener1P PacketListenerN - listening IO threads for TCMP transport protocol
Cluster|Member(Id=1, Timestamp=2013-04-05 10:45:44.655, Address=192.168.240.157:8088, MachineId=50044, Location=site:,machine:TMTEST-PC,process:5316, Role=CoherenceServer) - main thread for cluster service (discovery, node joing / leave, etc)
IpMonitor - IP monitor, participates in death detection scheme
Invocation:Management:EventDispatcher - Event dispatch thread for distributed JMX service in Coherence
Invocation:Management - main thread for distributed JMX service in Coherence
DistributedCache - main thread for DistributedCache cache service
Logger@9228429 3.7.1.7 - Coherence async logging thread
PacketReceiver - Thread dispatching incomming network packets
PacketPublisher - Thread sending out packets via TCMP
PacketSpeaker - Thread sending out packets via TCMP (offloads some work from PacketPublisher for better core utilization) -
I would like to know the version or name of SAP that is implemented in real
I would like to know the version or name of SAP that is implemented in real time?
This is a very generic question and really depends on what you are implementing (modules).
The history of the "R/3" is
3.0D Basis 300
3.0E Basis 300
3.0F Basis 300
3.1H Basis 310
3.1I Basis 310
4.0B Basis 400
4.5B Basis 450
4.6C Basis 460
4.71 Basis 6.20
4.72 Basis 6.20
5.00 Basis 6.40 (ECC 5.0 - Enterprise Core components)
6.00 Basis 7.00 (ECC 6.0) - actually in RampUp
All of those have increased business functionality and interfaces to other systems (CRM, BW etc.) -
Would like to know the name of the game pre-installed on an eMac.
I would like to know the name of the space ship 3rd-person shooter game pre-installed on an eMac.
Awhile back, I had used an eMac with a previous employer and there was a space ship 3rd-person shooter game loaded on the eMac.
This may or may not have been preinstalled. I just remember it being there when the eMac was purchased.
Thoughts?
Thanks,
--ToddHello Todd,
I think the game you refer to is called Deimos Rising. It can be purchased from here...
Deimos
Hope that is the one!
Cheers
Ian -
I am a subscriber Apple I would like to know the questions to my own Babylon.I forgot Questions.
<Email Edited by Host>We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address and password from your post (it's not a good idea to post personal info on any public forum, especially not your id and password). You should change your password IMMEDIATELY.
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use -
I would like to know the difference between OEL and RHEL
I would like to know the difference between OEL and RHEL, are they same?
If I test any application on RHEL, will it work on OEL too.
Thanks
Edited by: user10685113 on 08-Aug-2012 05:35The name OEL as such is not used anymore, since the product was renamed from Oracle Enterprise Linux to Oracle Linux with the release of version 5.5 in September 2010.
The main technical difference between Oracle Linux and RHEL is that Oracle Linux ships with an Oracle exclusive and optimized Oracle UEK kernel. It does however still install and provide the original and older RHEL kernel for fallback.
As of Oracle Linux 5.6, the Oracle UEK kernel is the default kernel. The current latest version of Oracle Linux 6.3 uses the Oracle UEK2 kernel, which is based on the Linux 3 kernel (2.6.39).
Oracle Linux is binary compatible with RHEL.
Oracle Linux has several advantages over RHEL, in particular if you plan to use it to install Oracle products.
• The same kernel UEK and UEK2 versions are available for Oracle Linux 5.x and 6.x
You do not necessarily need to perform a complete and unsupported system upgrade to use a newer kernel version and drivers.
• Oracle Pubilc YUM
Oracle provides a public yum repository for installing software packages including the latest patches. RHEL does not and requires a paid subscription for online access.
• Oracle specific drivers and software
Oracle Linux provides additional software and kernel drivers, for Oracle clustering, Dtrace, BtrFS and ASM, which is not available for RHEL 6.
Oracle Linux provides additional packages which trigger the automatic installation of system software prerequisites, including kernel parameters and oracle account setup to install Oracle Database:
oracle-validated (Oracle Linux 5)
oracle-rdbms-server-11gR2-preinstall (Oracle Linux 6)
And last not least you have just one vendor and support requirement for Oracle products.
Have you checked the Internet:
http://www.oracle.com/us/technologies/linux/index.html
https://linux.oracle.com
To obtain Oracle Linux:
https://edelivery.oracle.com/linux
https://wikis.oracle.com/display/oraclelinux/Downloading+Oracle+Linux (alternative)
Edited by: Dude on Aug 8, 2012 2:29 PM -
I am new to ODI and would like to know the folder structure
I am new to ODI and would like to know the folder structure
I am assume it is as follows
Project -
-- Models
---- and everything else under modelsAlmost right, but data models are not within Projects, they may be used across Projects. The objects (Interfaces, Packages and Procedures, plus variables, sequences, user functions) are created within the projects. Also Knowledge Modules are loaded into Projects.
-
I would like to know the list of possible output (export) file codec from FCP X. For example, can I export in FLV format? Where do I find the list, which gives me all the details about it? Or is there only one output codec? Thanks
That's an excellent analogy. While FCP cannot export FLV. It is possible to do a very simple substitution. If you export a QuickTime movie using the .mov suffix with the H.264 codec, you can change it to FLV simply by changing the suffix to .flv. This is an acceptable format for Flash movies on most web sites, if that's where you're trying to go.
-
hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.
System Requirements for AutoCAD 2013 for Mac:
Apple® Mac OS® X v10.8.0 or later (Mountain Lion), OS X v10.7.2 or later (Lion), or OS X v10.6.8 or later (Snow Leopard) with 64-bit Intel processor
Apple® Mac® Pro 4.1 or later; MacBook® Pro 5.1 or later (MacBook Pro 6.1 or later recommended); iMac® 8.1 or later (iMac 11.1 or later recommended); Mac® mini 3.1 or later (Mac mini 4.1 or later recommended); MacBook Air® 2.1 or later; MacBook® 5.1 or later (MacBook 7.1 or later recommended)
3 GB of RAM (4 GB recommended)
2.5 GB free disk space for download and installation (3 GB recommended)
All graphics cards on supported hardware
1,280 x 800 display with true color (1,600 x 1,200 recommended)
All Mac OS X supported language operating systems
Apple® Mouse, Apple Magic Mouse, Magic Trackpad, MacBook® Pro trackpad, or Microsoft-compliant mouse.
Mac OS X-compliant printer
Additional Requirements for 3D Modeling (All Configurations)
Pentium 4 or Athlon processor, 3 GHz or greater or Intel or AMD dual-core processor, 2 GHz or greater
4 GB RAM or more
6 GB hard disk space available in addition to free space required for installation
1,280 x 1,024 true color video display adapter 128 MB or greater, Pixel Shader 3.0 or greater, Direct3D®-capable workstation-class graphics card
3ds Max 2014 and 3ds Max Design 2014 are available for windows only:
System requirements for 3ds Max 2014 and 3ds Max Design 2014
Windows 8 or Windows® 7 64-bit Professional operating system
64-bit Intel or AMD multi core processor
4 GB RAM minimum (8 GB recommended)
4.5 GB free disk space for installation
3-button mouse
Latest version of Microsoft® Internet Explorer®, Apple® Safari®, or Mozilla® Firefox® web browser
Recommened Mac:
15-inch MacBook Pro with Retina display : 15.4-inch (diagonal) LED-backlit display with IPS technology
2880-by-1800 native resolution at 220 pixels per inch with support for millions of colors
Hardware
2.4GHz quad-core Quad-core Intel Core i7
16GB 1600MHz DDR3L SDRAM
512GB Flash Storage
Autodesk AutoCAD 2014 for Windows vs AutoCAD 2013 for Mac
USER INTERACTION Windows Mac
Command line
✓
✓
Multifunctional grips
✓
✓
Dynamic input
✓
✓
Auto-complete command entry2
✓
✓
Hide and isolate objects
✓
✓
Create and select similar objects
✓
✓
Delete duplicate objects
✓
✓
Properties palette
✓
✓
Quick properties palette
✓
Quick view
✓
✓
In-canvas viewport controls
✓
✓
Editable UCS icon
✓
✓
Layer tools3
✓
✓
Layer groups
✓
✓
Layer state manager4
✓
New layer notification
✓
Filter
✓
Quick select
✓
DesignCenter
✓
Tool palettes
✓
Content palette
✓
Navigation bar
✓
ShowMotion
✓
Coverflow navigation
✓
Multi-touch gestures
✓
AutoCorrect command entry
✓
File tabs
✓
DOCUMENTATION
Geometry creation & measurement tools
✓
✓
Parametric constraints
✓
✓
Associative arrays
✓
✓
Copy array
✓
✓
Object and layer transparency
✓
✓
Strike-through text
✓
✓
Blend curves
✓
✓
Multiple hatch editing
✓
✓
Sheet set manager
✓
Project manager
✓
Dynamic blocks5
✓
✓
Model documentation tools
✓
Table style editing
✓
Hatch creation preview
✓
Multiline style creation
✓
Digitizer integration
✓
Change space
✓
Express tools6
✓
Text align
✓
DESIGN
Solid, surface, and mesh modeling
✓
✓
Surface curve extraction
✓
✓
PressPull
✓
✓
Autodesk materials library
✓
✓
Material creation, editing, and mapping
✓
Basic rendering
✓
✓
Sun properties7
✓
✓
Visual styles7
✓
✓
Advanced rendering settings
✓
Camera creation
✓
Walkthroughs, flybys, and animations
✓
Autodesk ReCap point cloud tool
✓
Import Sketchup files (SKP)
✓
Geographic location
✓
CONNECTIVITY
External references (DWG)
✓
✓
Image underlays
✓
✓
PDF underlays
✓
✓
DWF underlays
✓
DGN underlays
✓
In-place editing of DWG references
✓
✓
Batch publish
✓
✓
Publish or plot to PDF
✓
✓
Plot styles
✓
✓
Plot style table editor
✓
✓
AutoCAD WS connectivity
✓
✓
Autodesk 360 connectivity
✓
Data links
✓
Data extraction
✓
Hyperlinks
✓
Markup set manager
✓
dbConnect manager
✓
eTransmit
✓
WMF import and export
✓
FBX import and export
✓
SAT import and export
✓
✓
Additional model import
✓
Design feed
✓
Share on Facebook
✓
LICENSING
Standalone licensing
✓
✓
Network licensing
✓
✓
Cross-platform licensing
✓ -
HT204088 Would like to know the exact date that a song was purchased using my iTunes account.
Would like to know the exact date a song was purchased (not billed because I changed my payment status) on my iTunes account
You should be able to view the purchase history on your account via your computer's iTunes, as per the HT2727 page that you posted from : If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
On your iPad you view a cut-down version (the last 90 days) via http://reportaproblem.apple.com
Both show an item's purchase date
Maybe you are looking for
-
i cannot rename a column in a table; i tried so many sql statements but with no results; i use the following: alter table tablename rename column old_column to new_columnname;
-
Can't create a new event in iCal
Odd thing is happening in iCal when creating a new event, clicking on the plus button creates a new calendar and not an event. When clicking on the day and from the pop up menue clicking new event I get an error message relating to mail? Doesn't happ
-
How to upload video to Wordpress
I Just upgraded my Wordpress site to Wordpress Peemier. How do I upload video from Adobe Elements 11 to Wordpress Using VideoPress? I can't seem to figure it out. Thanks, sd
-
HOW DO I RENDER A STILL IMAGE AND KEEP QUALITY
I'm still in search of help with why High Res. still pictures lose quality when I render. The images are at 300dpi, roughly 1900x1200 (they vary in size). I input them fine. Then, when I go to put them on the timeline - I get a pop-up window ask
-
SAPCCM4X windows Service shuts down
Hi! I would like to set up the SAPCCM4X agent on the satellite system. The installation with the commando >sapccm4x -R pf=... endes without any errors. The problem is that the appropriate SAPCCM4X.03 Windows Service stops after 3 sec. The output on t