We have a PCI-6110S to run our VIs. But, we are planing to buy another card (PCI-6024E) to run real time PID vi. So, if they are installed at the same computer, would it be a problem for LabVIEW to run both of them at the same time.

We have PCI-6110 S series installed in our computer. We are planing to purchase PCI-6024 E series card. They will be both installed at the same computer.
1) I am wondering if we run both of them at the same time, would we have any problem?
2) To run PID real time, can any E series of PCI card be used?
Thanks...

Hello Baho,
1) Using Traditional NI-DAQ, there could be problems with the fact that the NI-DAQ driver is not multi-threaded; meaning that while waiting for one operation to complete, the driver could cause another operation to time out. On the other hand, DAQmx is multi-threaded, and would eliminate this problem. At the time of this writing though, DAQmx does not yet support simultaneous-sampling boards like the PCI-6110S. A good solution then would be to use Traditional DAQ for the 6110S and DAQmx for the E-series board, and they would by default run in separate threads.
2) No, using a PCI E-Series board, the LabVIEW VI would have to run in a Windows OS and would not be Real Time or run deterministically. You can run the PID program in Windows, but the
results could be inconsistent. The advantage of a Real Time is that the OS is deterministic or that the OS allows you to tightly control or determine the maximum time any function takes to operate. This kind of control of the maximum operation time is not possible with non-Real Time OSs such as Windows.
If you would like to get set up with a Real Time System, I suggest you contact your Technical Sales Representative.
Regards,
Chad Evans
National Instruments

Similar Messages

I have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.

i have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.

Might be corrupted preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.desktop.plist
Click Go then move the com.apple.desktop.plist file to the Trash.
Restart your Mac and try changing the desktop photo.

HT4060 Hi, I have bought iPad air, and got apple 12w USB Power Adapter with pin flat plug. It is a problem for me. I live in Switzerland and the electric outlet is suitable only for round pin plug.

Hi, I have bought iPad air, and got apple 12w USB Power Adapter with pin flat plug. It is a problem for me. I live in Switzerland and the electric outlet is suitable only for round pin plug. I do appreciate for your support.

Plug adapter
http://img.diytrade.com/cdimg/975531/17878192/0/1293436146/Universal_socket_to_S witzerland_Plug_adapter.jpg

If I update to the full version of the CC software would I get a refund for the photoshop CC I have?

If I update to the full version of the CC software would I get a refund for the photoshop CC I have?

You had purchased Photoshop CC in March 2014 & got it cancelled in April 2014. You again purchased Complete CC
Creative Cloud membership (one-year
in February 2015, it doe not qualify for any refund.
Regards
Rajshree

I have the find my ipod app on my ipod and i lost it somewhere in my home. is there a way to use that find my ipod fature from my computer? i was hoping that the loud noise would help me to look for it.

I have the find my ipod app on my ipod and i lost it somewhere in my home. is there a way to use that find my ipod fature from my computer? i was hoping that the loud noise would help me to look for it.

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone
- You can also have to iPod play a sound via iCloud.

I have CC lightroom 5.7 . LR catalog 5 when I'm downloading updates it shows LR 5 as an "install" option... why would LR 5 be ready for install if I already have LR 5.7?

ok... LOL>.. so this is confusing... it tells me to ask a question... I did... then find out that "question" is the topic subject...
so here it is again:
I have CC lightroom 5.7 / LR catalog 5 when I'm downloading updates on CC it shows LR 5 as an "install" option... why would LR 5 be ready for install if I already have LR 5.7?

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

I'm looking into how apps use the cloud. Would you consider any app with social media access as uploading information to the cloud? e.g. being able to tweet through an app is the same as uploading data to the cloud

I'm looking into how apps use the cloud. Would you consider any app with social media access as uploading information to the cloud? e.g. being able to tweet through an app is the same as uploading data to the cloud

Most of us in this forum are users who volunteer on technical issues, and not Adobe employees although they do drop in from time to time. As users we simply have no control over activation and that's why you are not getting responses.
If you havn't done so,you might try the Muse forums and see if you can get a staff member to look into it. Have your case numbers and phone transcripts handy.
Last option is to keep calling customer service until you get someone who will help or ask for a supervisor.
Hope this get resolved,
Gene

I have Acrobat Pro 9.0. Am happy with it since I only have occasional need. Haven't updated it. Is there a way to do this? Do I need toy go through updates sequentially if they are available? Thanks for any help.

I have Acrobat Pro 9.0. Am happy with it since I only have occasional need. Haven't updated it. Is there a way to do this? Do I need to
go through updates sequentially if they are available? Thanks for any help.

Hi Spiral Geronimo,
It is always recommended to update the software to its latest updates. I would suggest you to update your Acrobat 9 to its latest updates. You can download the updates from the link below:
http://helpx.adobe.com/acrobat/kb/update-patch-acrobat-reader-7.html

What OS is recommended for LabVIEW to run on a PDA?

I want to send information from a PDA via RS232 to a lens. I'm wondering if LabVIEW 6.1 will run on a PDA or if its an exe that is loaded onto the PDA. If a new version of LabVIEW for PDA's is available. Finally, what OS is recommended for LabVIEW to run on a the PDA, I've been looking at MS Windows for Pocket PC. Thanks.

In article <[email protected]>,
"cmiranda" wrote:
> I want to send information from a PDA via RS232 to a lens. I'm
> wondering if LabVIEW 6.1 will run on a PDA or if its an exe that is
> loaded onto the PDA. If a new version of LabVIEW for PDA's is
> available. Finally, what OS is recommended for LabVIEW to run on a the
> PDA, I've been looking at MS Windows for Pocket PC. Thanks.
Have you looked at the Linux version of the Sharp Zaurus SL-5500 PDA. I
believe there are several Intel processor based PDAs that can run Linux.
Since they can run Linux, they can run LabVIEW for Linux. Wow, that's
awfully simple... perhaps I should get one. A used one on Amazon is
$380. Tell us how it goes.
-Kevin

Hi, we are a small clinic that uses the iPads for therapy. If we purchase an app for one iPad, can all of them download the same app at no additional cost?

Hi, we are a small clinic that uses the iPads for therapy. If we purchase an app for one iPad, can all of them download the same app at no additional cost?

Allan was somewhat incomplete in his statement. While technically it would be possible, from a licensing standpoint you need one license for each iPad unless those iPads were all going to be used by the same person (which I think unlikely given your described use). Here are the relevant terms of the iTunes Store agreement (emphasis mine):
"(ii) If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license."
So you would legally need to purchase one copy of the app for each iPad, something which would require an iTunes Store account for each iPad. For normal purchases, each iTunes Store account would need an associated credit card or prepaid iTunes card.
The Volume Purchase Plan works similarly - you still need one license and one iTunes Store account for each iPad - but the purchasing is centralized so you don't get billed multiple times. You get one recemption code for each license you purchase. See:
http://www.apple.com/business/vpp/
Regards.

HT4972 When I take photos of myself, the image come out backwards. I have an iPad2 and an iPad 3, and both of them do the same with my self portraits. Any ideas on how to remedy this?

When I take photos of myself, the image come out backwards. I have an iPad2 and an iPad 3, and both of them do the same with my self portraits. Any ideas on how to fix this. I use wifi.

Gmabert-
The front camera displays a reversed image on the screen, as if you were looking into a mirror. When you take a picture, it comes out normal, which is backwards to what you would have observed on the screen.
Fred

Do I need "nilm.exe" file for labview to run properly?

I have some problems with the "nilm.exe". Sometime it create a lot of other file in Windows tak manager and it lock completely my computer. Do I need "nilm.exe" file for labview to run properly? Can I remove it from my computer ?
thanks in advance for your reply

NILM.EXE is the NI License Manager for Remote Panels. If not using Remote Panels then you do not need to use NILM.EXE. The following webpage shows how to disable nilm.exe:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/581a81c57ac0c10b86256b5a005f2975?OpenDocument
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

I just bought my first iphone 4 actually i bought two and for some reason on both phones one of the speakers does not work im just wondering if this is normal because i took it back to the store and they told me all of the phones are the same?????

i just bought my first iphone 4 actually i bought two and for some reason on both phones one of the speakers does not work im just wondering if this is normal because i took it back to the store and they told me all of the phones are the same?????

There is only one speaker, what looks like another speaker is actually a microphone. All iPhones only have one speaker down by the dock connector.

I have two iPhones. I just backed up all my photos on my old phone using iCloud but when I log into iCloud on my new iPhone nothing appears? The GB for the photos has been taken from my iCloud allowance so how do I retreive them on the new phone

I have two iPhones. I just backed up all my photos on my old phone using iCloud but when I log into iCloud on my new iPhone nothing appears? The GB for the photos has been taken from my iCloud allowance so how do I retreive them on the new phone

if you have a laptop just transfer them that way
open the iPhone folder then DCIM then copy all photos off your old phone then open iPhone folder for the new phone the DCIM and paste all photos in their

It concerns adobe export pdf program. When we open this program, it appears on the right of the screen." recognize the text in english"but. we would like to change it for french language. Because when we export the document under word program , it uses

It concerns adobe export pdf program. When we open this program, it appearsq on the right of the screen." recognize the text in english"but. we would like to change it for french language. Because when we export the document under word program , it uses english dictonnary to correct the text. thanks for your answer..

[topic moved from Developers to Acrobat.com forum]

We have a PCI-6110S to run our VIs. But, we are planing to buy another card (PCI-6024E​) to run real time PID vi. So, if they are installed at the same computer, would it be a problem for LabVIEW to run both of them at the same time.

Similar Messages

Maybe you are looking for

We have a PCI-6110S to run our VIs. But, we are planing to buy another card (PCI-6024E) to run real time PID vi. So, if they are installed at the same computer, would it be a problem for LabVIEW to run both of them at the same time.