WE20 message No Package size option

I'm maintain partner profile-->outbound parameters, but I can't find a option to set the package size.
NetWeaver2004s(in the SAP Discovery system)
Anybody can help me?

As far as my knowledge, Package size (collect idoc)is generally not visible when, either ur messge type or basic type is not mentioned correctly,
Also check ur receiver port.
Regards,
Pratibha
Message was edited by:
Pratibha

Similar Messages

Maximum package size for data packages was exceeded and Process terminated

Hello Guru,
When i am execute the process chain i got this message Maximum package size for data packages was exceeded and Process terminated,any body help to me in this case how can i proceed.
Thanks & Regards,
Suresh.

Hi,
When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
2) Run the load only to PSA.
3) Once the load is succesfull , then push the data to targets.
In this way you can overcome this issue.
You can also try RSCUSTV* where * is an integer to change data load settings.
Change Datapackage size for extraction, use Transaction RSCUSTV6.
Change Datapackage size when upload from an R/3 system, set this value in R/3 Customizing (SBIW -> General settings -> Control parameters for data transfer).
IN R/3, T-Code SBIW --> Genaral settings --> Maintain Control Parameters for Data Transfer (source system specific)
Hope this helps.
Thanks,
JituK

PACKAGE SIZE n in SELECT query

Hi,
When using PACKAGE SIZE n option with SELECT queries, how to determine the best/optimum value of n ? Especially when we use this for querying tables like EKPO, EKKO etc.
Regards,
Anand.

> When using PACKAGE SIZE n option with SELECT queries, how to determine the best/optimum value of n ?
The 'package size' option to the select specifies how many
rows are returned in one chunk.
According to ABAP-Doku, it is best to use it with an internal table:
DATA: itab TYPE STANDARD TABLE OF SCARR WITH NON-UNIQUE
DEFAULT KEY INITIAL SIZE 10.
FIELD-SYMBOLS: <FS> TYPE scarr.
SELECT * INTO TABLE itab PACKAGE SIZE 20 FROM scarr.
LOOP AT itab ASSIGNING <FS>.
WRITE: / <FS>-carrid, <FS>-carrname.
ENDLOOP.
ENDSELECT.
But, basically, your application's requirements determine
what's the best value for n.
If you don't want a lot of DB-access, you choose a high
value for n. If you don't want a lot of data in memory, you adjust it to a lower value.
You can also use the 'up to n rows' construct in the select to limit the number of rows fetched from the db.
thomas

Package size

hi experts,
please help in usage of package size in select query with where clouses
without for all enteries
regards
prashant

Hi Prashant,
Package size option in select query is useful in multiple cases:
- When the number of records accessed by the select query for the given where clause are very large and it may slow down the performance of the program. In this case package size option is used such that data is fetched in multiple hits.
- If the program is checking for a particular record from the database table having very large number of records without knowing the actual key. In this case package size can be used such that we can check for the existence of the required record after each fetching and can be exited from loop immediately after finding the record.
Thanks,
Sankar

Shipping Options Packaging Type ? Can I customize my options for package sizes? Tied with UPS but use own package sizing.

My shipping department uses their own packaging for our products. Currently I cannot find an option in the shipping options to tie in my package sizes to the shipping packaging options.

My shipping department uses their own packaging for our products. Currently I cannot find an option in the shipping options to tie in my package sizes to the shipping packaging options.

Partners profile - outbound parameters - package size ?

Hi,
My scenario: IDOC(R/3)-XI-File.
R/3 settings: WE20 - While filling out outbound parameters in partners set up i am getting error "<b>please enter a value for package size</b>" highlighting <b>Receiver port</b> in red. My receiver port is tRFC type whose RFC destination would be XI server.
I have created logical systems(SALE) for sender(R/3) and receiver(XI) as well assigned them to clients.
Please help.

Hi Bhavesh,
This is what exactly I did and I ended up getting this error message. I did some research on how to generate partner profiles on sdn.
"transaction SALE), choose Modeling and Implementing Business Processes ®Maintain Distribution Model and Distribution Views (transaction BD64)."
So,I have created a model view called "EC4_TO_PI1".
Then I chose Environment----> Generate Partner profiles. Now, I have to select two model views. (From & To). From Model View I have selected the above model view " EC4_TO_PI1". I am not sure about TO field.
Can you please guide me to helpful documentation ? I am not even sure what is distribution model is. Thank you for your help.
By the by, I have already created logical systems for sender(R/3) and receiver(XI). fyi.

Idoc package size

Hi Guys,
We are using Idoc adapter packaging (sender side) thanks to Mike.
The problem is we want a package size bigger than 10k and ECC limits that to 9999 (4 digits)
What are the options for us?
We are planning to go with XML-File or XML-HTTP.
But if the standard packaging size can be increased somehow to overcome the 9999 restriction, we will be more than happy to go with that solution.
What are your experiences with this?
Thanks
Jai

Vaas,
Many thanks.
If I understand correclty, the approach described by Sravya will only enable processing all idocs at the same time.
It will still process them as separate messages and hence creating as many files.
Is my understanding not correct?
Thanks
Jai

New preview function for iPad–error message "Multiple page sizes not supported"

When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x 1296. I would really like to preview this folio before publishing. Any suggestions?

If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

Will it improve performance if PACKAGE SIZE added to a select query?

Hi Gurus
While doing the performance optimization I could see that in the code it is splitting the BKPF entries selected to a package of 500 and selecting from BSEG cluster table. In effect the remaining tables are also getting hit based on the no. of entries(packets) in the selected BKPF internal table.
Cant we use the package size 500 in the select statement instead of this spliting and hiting the tables in a do loop.
eg:-
      SELECT x v z
        FROM bseg
        APPENDING TABLE lt_bseg
        PACKAGE SIZE 500
        FOR ALL ENTRIES IN lt_coep
        WHERE bukrs = lt_coep-bukrs
        AND   belnr = lt_coep-belnr_fi
        AND   gjahr = lt_coep-gjahr.
When I read the keyword documentation I saw a note in that as " If the addition PACKAGE SIZE is specified together with FOR ALL ENTRIES, it is not passed to the database system, but is applied to the result set on the application server, after all selected rows have been read" I did not understand the meaning of this.
So I am confused whether I can go ahead with this approach or will go along with the already used BKPF split logic and selct from BSEG and other tables in DO loop.
Can you please help me << removed >>.
Thanks & Regards,
Shinimol.
Edited by: Rob Burbank on Sep 23, 2010 9:09 AM

Hi,
regarding your second doubt:
> Second doubt is on the note I saw in key word documentation. " If the addition PACKAGE SIZE is specified together with FOR ALL ENTRIES, it is not passed to the database system, but is applied to the result set on the application server, after all selected rows have been read. " I couldn't understnd this. When I debugged the select with F5 it was selecting 500 each till it reaches th end.
> So what does it mean, we can use this option or we should not use?
the FAE does your select in pieces and collects the result in the database interface in an inermediate buffer and
eliminates the duplicates there. AFTER this it gives you the number of rows back to your ABAP program that are specified with package size. It simply means that the package size addition has no effect on the memory consumptionfor the intermediate
buffer in the database interface.
Kind regards,
Hermann

Need you help !!! -- How to set PACKAGE SIZE in CURSOR?

Dear experts:
Does anybody know how to set the package size if you use cursor in your abap program?
My scenario is to select all the data from MARA table in which the data volumn is very big, and then process for some specific logic. When I try to select them into one internal table or use CURSOR without package, my abap program will abort after running for around 1 hour. So I was thinking if I can use cursor and set the PACKAGE SIZE like 10,000 and process the data by batch.
Here is my sample code:
OPEN CURSOR: CUR_MARA_TBL FOR
SELECT * FROM MARA.
DO.
FETCH NEXT CURSOR CUR_MARA_TBL INTO CORRESPONDING FIELDS OF WA_MARA_TBL.
IF sy-subrc = 0.
......Detail logic......
ENDIF.
ENDDO.
I would appreciate if anybody can let me know how to set the package size based on the sample code above, or any webpage/article about that.
Any reply would be appreciated and thank you all in advance!
Best Regards.
Tim
Moderator message: please study F1 help for FETCH statement.
locked by: Thomas Zloch on Sep 8, 2010 4:10 PM

The Spark List's layout property has the requestedRowCount and requestedMinRowCount properties.
You can either set a new layout property on your List like this:
<s:List>
        <s:layout>
            <s:VerticalLayout requestedMinRowCount="1" />
        </s:layout>
    </s:List>
or reskin the List and modify the VerticalLayout in your copy of ListSkin.
Jason

Error in select query with package size

Hi Experts,
I have an issue.
SELECT * FROM (w_tab-tablename) I
NTO CORRESPONDING FIELDS OF TABLE <lt_data> PACKAGE SIZE 10000.
Am splitting the table for every 10000 records,for first time the select query is successful.
But when it comes for the second 10000 records,its throwing the following dump.
"DBIF_RSQL_INVALID_CURSOR"
Help Appreciated

Hi,
   There are a few instances where you get this error.
    1) If you are debugging inside select ... endselect.
    2) You have written any of the below statements inside select ... endselect.
Please look at the dump .. you'll find the below ..
MESSAGE (apart from MESSAGE S...)
COMMIT WORK
ROLLBACK WORK
BREAK-POINT
WAIT
CALL FUNCTION ... DESTINATION (synchronous RFC)
CALL FUNCTION ... STARTING NEW TASK
RECEIVE RESULTS
CALL DIALOG
CALL SELECTION-SCREEN
CALL TRANSACTION
CALL SCREEN, or any other statement that results in the display of a
new screen
Regards,
Srini.

Maximum package size for data packages was exceeded?

Hi Experts,
I am facing this problem "Maximum package size for data packages was exceeded". When I am trying to laod. I even tried to reduce data packet and change DTP settings in EXtraction to Get All New Data Request by Request but still same error is occuring. Can u Plz focus light on this.
Thanks,
Krishna

You can refer to the below OSS note:
Note 1144332 - Consulting note: Message RSBK 250: Package size exceeded
And other related notes: 352038, 417307
Hope this helps.
Murali

Photo size options fails to work when selecting mail option in iphoto

photos being sent via the mail option in iphoto seem to be set at a default of 130kb!! Regardless of which of the sizing options I select. I have taken to moving the photos to the desktop then putting them in a folder and attaching to the email as a way of getting around this problem. If I do the above without putting the jpeg into a folder it also gets reduced automatically to 130kb. I have then had problems with people receiving the photos sent in an attached folder not being able to open them. Given that the iphoto/mail option in all previous OSX worked fine what do I have to do to get the old functionality back?

Welcome to the Apple Discussions.
You also need to check the size option in the bottom right corner of the New Mail Message window:
Uploaded with plasq's Skitch!
Regards
TD

Snow Leopard, iPhoto, Mail - loss of image size option when mailing photos

I just installed Snow Leopard on both my laptop and my desktop. Now I have lost one of the size options when I email images directly from iPhoto. This is a big problem for me, as I have the need to send photos out to colleagues for their review several times per week. Before the new OS, I could choose (from within iPhoto or from within Mail) from these options: small, medium, large, and full-size. "Large" was the choice that almost always worked best for me. Now an image is medium-sized no matter whether you choose medium or large. Small and full-size still work.
If I add images to a mail using the photo browser in Mail (which is less convenient for me anyway), then I lose the titles and descriptions I have added to those images in iPhoto. Not good.
Is there a setting I can change, or is this a bug, or what?
Help.
Marion

Ernie,
It's not the the image size buttons are not available. They are. It's that they don't work correctly. From within iPhoto: choosing "small" gives me a small image; choosing "medium" gives me a medium image; choosing "large" also gives me a medium image; choosing "full" gives me a full-size image. So, there are four buttons, but only three sizes. I need large, and it's the one that's not working.
I am currently experimenting with your export-attach suggestion, and the results are very messy indeed as well as inconsistent. If I export an image as .jpeg and as full-size, and then attach them to a mail, the first problem is that I lose all the titles and descriptions, even though I have chosen to export them. In the past, all the images lined up neatly in the body of the message with titles underneath each one; now the images are all "stuck together" and you must mouse over to get the title info. Thus you can see this info for only one image at a time - inconvenient for my colleagues.
The second problem is that, the size option buttons work for some images and not for others. I tried attaching three files of different sizes: 2.7MB, 5.2MB, and 6.2MB. All four size buttons work for the two larger files, but, once again "medium" and "large" choices both result in the same size image, "medium."
Even if the export-attach option worked correctly, it would involve many more steps and much more time than my former method of sending direct from iPhoto.
I have not upgraded to iLife9. Perhaps the problem has been corrected in it. I was holding out for iLife10, but might go ahead with 9 if I could be assured it would work. This is really a huge problem for me.
Thanks,
Marion

How to specify PACKAGE SIZE for to RFC_READ_TABLE from PyRFC?

I'm trying to use PyRFC to extract large tables via RFC_READ_TABLE (due to an uncooperative/unsupportive basis team).
I know that RFC_READ_TABLE supports calling it with PACKAGE SIZE since ERPConnect does it by default.
In Python for Basis (Part 1), I learned how to specify an Open SQL where clause using the OPTIONS:
result = connector.call('RFC_READ_TABLE',
                       QUERY_TABLE=tablename,
                       DELIMITER=delimiter,
                       OPTIONS = [{'TEXT':where_clause}])
Is there a way, and how to specify PACKAGE SIZE in this case?
Thanks

Hi,
the package size works, but you need to call the function module multiple times in a loop. Here's an excerpt of the attached script:
recordcounter = 1          #needs to be >0 to get the while loop going
iteration = 0              #the number of times the function module got called
while recordcounter > 0: #as long as the function module calll returns rows...
    tempresult = self.call('RFC_READ_TABLE',
                            ROWSKIPS=iteration*fetchsize, #defines the number of rows to skip
                            **parameters)
    iteration=iteration+1 #increase the iteration
    data = tempresult['DATA']    #assign the returned rows to a variable
    if len(data) > 0:      #have there been any rows?
        for row in data:      #Do something with them
    else:
        recordcounter=0    #set recordcounter to 0 to end the while loop.
The script is far away from being perfect. It doesn't deal with RAW fields and the data types it returns are all strings. It does what I needed it to do but it may not be sufficient for what you may be trying to achieve.
Best regards
Lars

WE20 message No Package size option

Similar Messages

Maybe you are looking for