Web util out of box

As we all know webutil was not supported by oracle in forms 6i and 9i.
Can some one please give the information
1.which version of forms has webutil available out of box, i.e. where it will be installed as part of forms 9ias services.
2.From which version it will be fully be supported by oracle.

I see now that the portlet 'MyPortlet' is the problem. If I do not use this the
new portal web-app works.
thanks
"PortalUser" <[email protected]> wrote:
>
Hello,
Attempting to follow the out of box 4.0sp1 instructions to create a new
portal
web application.
I followed the directions in
http://e-docs.bea.com/wlp/docs40/portal/devbasic.htm#1055640
and also took advice from
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.portal&item=313&utag=
However I still get a java.lang.NullPointerException when I call http://localhost:7501/myportal
Any help is appreciated.
Many thanks

Similar Messages

CF8 Doesn't Run on Mac OS X Leopard Out-of-Box

There's been many threads floating around the web complaining
about people not being able to use the CF8 server anymore after
upgrading to Mac OS X Leopard. It doesn't give an error nor serve
up pages, it just sorta hangs there. Some people have been able to
do a multi-server install, and then jack with jrun to get it going
... but it doesn't work "out-of-box" like it used to in Tiger where
it just worked!
Be forewarned.

NickC wrote:
> There's been many threads floating around the web
complaining about people not
> being able to use the CF8 server anymore after upgrading
to Mac OS X Leopard.
> It doesn't give an error nor serve up pages, it just
sorta hangs there. Some
> people have been able to do a multi-server install, and
then jack with jrun to
> get it going ... but it doesn't work "out-of-box" like
it used to in Tiger
> where it just worked!
>
> Be forewarned.
>
Leopard is not a supported platform for cf8.
but knowledgeable ppl have found ways to run it:
http://www.markdrew.co.uk/blog/index.cfm/2007/10/27/Running-ColdFusion-8-on-Leopard
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

Web Util & Report integration to gather.

Hello all
I have configured webutil and report integration in Developer suite 9i.
and it is working very fine.
now I am upgrading it to 10g.
I have configured web util and it is working fine.
and now I am getting problem to integration for "reports" as follows.
FRM-41213 Unable connect to the report server cyan.
I have developed one form for testing the report integration with form.
but when i am running this form with default configuration of formsweb.cfg then
it is working fine as follows.
http://chirag:8889/forms90/f90servlet?form=c:\temp\chirag&userid=cyan/cyan@cyan
when i am running this form using web util configuration then i am getting
the abouve error.
http://chirag:8889/forms90/f90servlet?config=cyan
but my application in Ds9i have used both webutil and report integration
so i have to find out the same thing in DS 10g.
Following are the code of report integration.
DECLARE
     mreport_other varchar2(4000);
BEGIN
     set_report_object_property('CYAN',REPORT_DESFORMAT,:CONTROL_BLK.REPORT_DESFORMAT);
     mreport_other := 'p_report_title="'||:control_blk.report_title||'" ';
     mreport_other := 'p_user_name="'||'CHIRAG'||'" '||mreport_other;
DECLARE
     report_status     varchar2(30);
     rep_id                    REPORT_OBJECT;
     v_rep                         varchar2(100);
     mreport_file     varchar2(200) := 'C:\CYAN'||:control_blk.report_path;
BEGIN
     rep_id := FIND_REPORT_OBJECT('cyan');
     SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_SERVER,'cyan');
     SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_FILENAME,mreport_file);
     SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_OTHER,mreport_other);
     v_rep := RUN_REPORT_OBJECT(rep_id);
     report_status := report_object_status(v_rep);
     if Report_Status = 'FINISHED' then
          WEB.SHOW_DOCUMENT('http://'||'chirag:8889'||'/reports/rwservlet/getjobid' || substr(v_rep, length('cyan') + 2, length(v_rep)) || '?server=' ||'cyan');
     end if;
END;
END;
formsweb.cfg as follows
[cyan]
BaseHTML=c:\oracle\cyan\server\webutiljini.htm
BaseHTMLJinitiator= c:\oracle\cyan\server\webutiljini.htm
baseHTMLjpi=basejpi.htm
BaseHTMLie=baseie.htm
lookAndFeel=oracle
envFile=C:\oracle\cyan\server\webutil.env
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
separateFrame=True
pageTitle=Cyan Ltd
form=C:\cyan\admin\security\forms\cyan_logon.fmx
otherparams=cyan_home=c:\cyan
userid=cyan/cyan@cyan
width=800
height=566
buffer_records=NO
debug_messages=NO
array=YES
query_only=NO
quiet=NO
RENDER=YES
logo=webpage
webutil.env as follows
ORACLE_HOME=C:\oracle\OraDS10g
FORMS90_PATH=C:\cyan\admin\global\forms;C:\cyan\payroll\forms;C:\oracle\cyan\forms
CLASSPATH=c:\oracle\cyan\lib\webutil.jar;c:\oracle\OraDS10g\jlib\debugger.jar;
c:\oracle\OraDS10g\jlib\ewt3.jar;c:\oracle\OraDS10g\jlib\share.jar;
c:\oracle\OraDS10g\jlib\utj90.jar;c:\oracle\OraDS10g\jdk\jre\lib\rt.jar
WEBUTIL_CONFIG=c:\oracle\cyan\server\webutil.cfg
Please assist me to solve this problem
from
Chirag Patel
Nairobi

Hi,
I remember that in 9i we had a problem that required both the Reports and the WebUtil java libraries to be in teh Forms classpath in the default.env. This however should have been fixed in Forms 10g.
For what it is worth, can you try
- In the registry variable "REPORTS_CLASSPATH", add the path of the jar file that will be used by webutil (webutil.jar basically)
- In the default.env file, add the Reports jar (see REPORTS_CLASSPATH for values)files to the classpath of Forms
Frank

Need to put out of Box password policy in self registration form.

Hi All,
I create a self registration workflow in i put a self gistration form. In the validation section of password field i apply check method of com.waveset.policy.stringQualityPolicy to apply out of box Password policy. But i got an error while running the workflow from configurator interface. i put the trace below. please help.
<defvar name='policy'>
</defvar> --> null
<defvar name='policyChecker'>
</defvar> --> null
<invoke name='check'>
<ref>policyChecker</ref>
[<defvar name='policyChecker'>]
<new class='com.waveset.policy.StringQualityPolicy'>
</new> --> com.waveset.policy.StringQualityPolicy@af914c
[</defvar>] --> com.waveset.policy.StringQualityPolicy@af914c --> com.wavese
t.policy.StringQualityPolicy@af914c
<ref>policy</ref>
[<defvar name='policy'>]
<invoke name='getObject'>
<rule name='getCallerSession'>
<Rule name='getCallerSession'>
<block trace='true'>
<select>
<ref>context</ref> --> com.waveset.session.LocalSession@6c2a78
</select> --> com.waveset.session.LocalSession@6c2a78
</block> --> com.waveset.session.LocalSession@6c2a78
</Rule> --> com.waveset.session.LocalSession@6c2a78
</rule> --> com.waveset.session.LocalSession@6c2a78
<invoke name='findType' class='com.waveset.object.Type'>
<s>Policy</s> --> Policy
</invoke> --> Policy
<ref>policyName</ref> --> Password Policy
</invoke> --> Policy:Password Policy
[</defvar>] --> Policy:Password Policy --> Policy:Password Policy
<ref>userPassword</ref>Resolved variables.user.userPassword to aaa
--> aaa
<null/> --> null
<null/> --> null
<ref>accountId</ref>Resolved variables.user.accountId to aaaaaaa
--> aaaaaaaXPRESS <invoke> exception:
com.waveset.util.WavesetException: Can't call method check on class com.waveset.
policy.StringQualityPolicy
==> java.lang.NullPointerException:
</invoke> --> null
Thanks in advance.
Any pointer will really be helpful.
Edited by: Amit_Bansal on Feb 27, 2008 3:05 PM

Hello,
Has anyone been successful at displaying the "View PAssword Policy" on the self registration form? Or is this not possible to get done?
Thanks
Khanh

Understanding Out of box security features

Hi,
We are in the process of understanding the capabilities of ATG security features - out of box. As far as cross-site scripting concerned, I read about two parameters (enforceSessionConfirmation and warnOnSessionConfirmationFailure) under /atg/dynamo/Configuration. I tried altering input parameter in URL using <script> tag and ATG's securityServlet said "Suspicious query parameters detected" and page was not loaded. I am finding out different test cases for the above parameters. If there are any other features available in ATG out of box, please share it. Also, I like to see usage of AccessControlServlet for verifying users on certain pages like My Account, order history etc to see if user is logged in - a better idea?
Thanks.

Apart from the mentioned ones, here are some other OOB security features which I could recollect :
- There is a whole atg.security API which is used to manage user account security. Using those APIs you can do things like: looking up user identities and associate them with roles, manage access control lists (ACL), use and extend default security policies to determine whether a user has access to a particular object etc.
- There is a MimeTypeDispatcher and MimeTyperServlet which are configured to handle various MIME types and define the forbidden file types.
- In ATG CA there is ValidateURLServlet also provided to prevent any spoofing of URLs.
- In certain case you may want to generate IDs that cannot be easily guessed for obvious security purposes. E.g. for gift certificates or coupons. In such cases you may consider using default ObfuscatedSQLIdGenerator component.
- There is a secure random number generator component provided at /atg/dynamo/service/random/SecureRandom which can generate random numbers more efficiently than java.security.SecureRandom.
- At any time if you want to encrypt any sensitive information that is stored in a component properties files, you can do that with the OOB class atg.core.util.Base64 or some other method, and then provide the implementation of atg.nucleus.PropertyValueDecoder in your component where you can decode the value of encoded property and use it.

A505-S6986 - IE crashing out of box

Brand new just out of box...So far I am underwhelmed with this machine (upgrading from a very, very, very old Compaq DT machine that was rebuilt years ago). I am finding this machine slower than expected for boot up, and find that IE crashes constantly.
I have not yet removed Norton, but know I need to get the "utility tool" to remove it and will put on Avast. What other things should I remove, add or change to make this machine perform at the top of it's game? I plan to spend the next three days getting this setup so I can retire the Dino to Jurasik Park.
What about partitioning and isolating the operating system, programs, etc? I am a bit of novice, so please keep that in mind with suggestions of what should be done.
Thanks

If it's still under warranty, send it back. That would be my first option. I wouldn't be surprised if they put in the wrong OS in the recovery partition. It's typical copy and paste from their typical best selling system is what you have. You can always call their 800 number and see if they will support you even if it's not under warranty.
Toshiba is making a lot of junk lately. I've owned 3 Toshibas prior to acquiring my latest POS last year.

Can not close web page out since upgrading IOS 8

Can not close web page out since upgrading IOS 8

Tap the minimize icon (two boxes) in the upper right corner of the Safari page. Then tap the tiny x in the thumbnail to close. You can also swipe the thumbnail to the left to close.

WRT54G Web-utility Issues

First of all...I'm using a Linksys WRT54G v5 wireless router and a sbc/yahoo DSL service with a Siemen's 4100 DSL modem. I am addressing all of my issues using a Dell XPS710 fully loaded running Windows Vista and using IE 7.0.6 I've always been able to use the internet (besides DSL's inevitable issues), but in the last few days have been messing with the settings of my network in order to streamline our filesharing/printersharing within my household.
So I tried checking out the 'General Linksys Router FAQs' but when I clicked the links regarding my problem, it only loaded windows addressing how to set up a "PPPOE DSL service."
So my issue is in regard to accessing the Web-based utility. When I key in my router's IP address to my web browser (http://192.168.1.1/) and type in the generic password, then it loads the web-utility with obvious 'errors on page.' I then cannot do anything more than change the time zone...I cannot chose a different tab than the "Setup Basic Startup" tab which loads automatically.
When I click on the "wireless" tab for example, a white page loads with this gibberish:
¶âÐ&†¶¤ ´! h% Cèl£¹>²$h VÚ ªå QVÄš\aIAB Öd` «°xU cñj Veñê Æâ5 ¬Æâ5)ŒÅk X Å;¡0 O– ° cDæ‰äË eì …BÚƒ,í³³óÅ ÍÚA †P ¿þ öc.]¡˜g®2( Ê1‘3š)}l’Ç*y¬ÐÖ }¤uòX¥ úH[›ä±F[[ô‘¶ž Ç:m•%úL›e:¯FÐN'Ö ÚéÌšA; Z«†ž 50<ˆ g^Œ3/Æ™ ãÌ‹qæÅ8óbœy1Î¼˜`^L0/&˜ Ì‹ æÅ$ó(Œ™ÇÎd‹Â Â W0• ‘ Ãvˆ•´Í®"µÍR Û
I can then return to the previous page on my browser to see the Setup screen again, but there are still obvious visual errors in how the page loaded (it has some of those stupid 'red x's' where images were supposed to load).
So I tried updating the the firmware (its still 1.00.6) using the instructions I found for my router on the linksys website...but halfway during the upload of the .bin file from the management screen, the page failed to load and I recieved the "Internet Explorer cannot display the webpage" message. Since then, my connection has been cutting in and out (Local only) and sometimes I cannot view that the WRT54G is part of my network. Connecting to the internet directly through my DSL modem works just fine still.
So why can't I access my web-utility correctly? Why can I not upgrade my firmware? Would upgrading the firmware fix the web-utility access errors? Why is the connection cutting 'in and out' rather than just not working? Has ANYONE else had this problem (with the web-based utility not loading correctly in IE)?
Thanks,
Todd W.
Message Edited by Veridicus on 12-11-2007 07:11 AM

I fixed it! I had to 'reset' the modem for that minute and then upload the firmware from a non-vista pc. The web browser gave me the 'upload successful' page and so I restarted the computer and unplugged and replugged back in the router...then when the computer rebooted and I loaded the Linksys Router Web-Utility...viola...it no longer contained those ridiculous error screens or jibberish.
And here I though I was gonna have to drop another 50 bucks...

Wrt110 still cannot access web utility w/o resetting

http://homecommunity.cisco.com/t5/Wireless-Routers/Unable-to-Access-Router-Admin-Page/m-p/293835/hig...
Long existing problem, that IE8 temporarily cleared up (actually only for a day or so).
Router has to be reset to view the on-line web utility. Doesnt matter what version of Windows or IE. With and without A/v and firewall. Tried MANY variables.
This router will not access the Advanced Settings web utility pages no matter what I do, unless it's to power off then back on.
Once I get this problem straightened out I can address the other one: my new netbook cant get on the internet at home with my password. It forces loss of connectivity to the hardwired desktop when I try.
But I really need to know what I'm doing wrong, why I can NEVER get the online admin pages without powering the router off/on.
Please guide me.
Solved!
Go to Solution.

Yes. Hardwired to the router.
Using the "Advanced Settings" on the menu under the router model in the EasyLink Advisor.
Also by typing IN the URL using http and https. With and without firewall. W & W/o a/v. Ie 7 & 8. Vista & Windows 7.
Ie64 and Ie32. And Firefox.
I upgraded from Vista 64 to W7 64. And updated IE from 7 to 8 (which gave me one day access without resetting).
Please offer suggestions. It has to be something in the software since ALL the variables have been tried (I cant think of anything else to change).
Router's webpage (192.168.1.1 which IS the address used by the EasyLink Advisor when I click on Advanced Settings) results in a Diagnose Connection Problems pages which ends with this result:
Problems found: "The remote device or resource won't accept the connection" Only when I power off/on can I get the signin popup and the web utility/admin pages.
I might add that my netbook cannot get on my network even with my password. I no longer use mac address filtering; turned it OFF. It IS in the OFF/Disabled position on the router's utility page. I think this problem might get fixed once I find the solution to getting to the admin pages/web utility pages without having to power down/up.
I can get this desktop AND the netbook on if I power everything down. But who wants to do that every time?
HELP please!
thank you for ready and any suggestions

How to add user information list in site page using out of box

Hi,
Kindly suggest me any solutions or reference links regarding adding user information list in one of the site pages using out of box.
Thanks
Razvi444

Hello Razvi444,
it is not clear what you are trying to accomplish, but for your information User Information List could be find under <your_site>/_layouts/15/people.aspx?MembershipGroupId=0. If you would
like to display all user on the page you need to develop a custom web part and using the aforementioned URL all user could be displayed on your page.
Or you could also edit the page and insert a link (/_layouts/15/people.aspx?MembershipGroupId=0), set a description. SharePoint will name it people.aspx. After that you could "Edit Source" and rename it accordingly.
Let me know if this one is helpful.
Enjoy!

AppleHIDmouse.plist missing from out-of-box installation. Right click on mouse not working

Hello all!
I have several MBPs that I help manage. Some of our users state their (wired) Apple Mouse does not right click even after setting it in preferences.
When we looked at those computers more closely, they are missing the AppleHIDmouse.plist file in /System/Library/LoginPlugins/BezelServices.loginPlugin/Contents/Plugins directory. While other computers have it included and right clicking works with no intervention on our part.
Does anyone know what would cause an out-of-box installation of OS X to miss that file? We copied it from a working computer and placed it into the directory on the machines showing the symptoms and their right button works now. But I'd still like some input from the community for our future deployments.
Technical Details:
The MBPs showing symptoms are 15"-17" with a mix of 8 and 16 GB models.
We tested OS X 10.7.4, 10.7.5, and 10.7.4 w/ Combo Update. All installed as fresh installs. File was still missing D:
Thank you in advance!

Try this web page for ideas.
http://support.apple.com/kb/ts3048#7

How do I access the web utility with model cisco sf302-08p ?

Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

restore the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

Creating automated email reminders to users every 2 weeks via Workflow 2010 Out of Box approach only

Hi,
I have been asked to automate the email reminders to users (every two weeks) from the SharePoint2010 solution.
I am trying to achieve this via workflow ,but am unable to get the results.
Req :
Twice a month the users should get an automated email reminder for a specific task.
1. On 14th (or last working day in mid month -1) of the month. ( a field "mid month end" captures the date as 15th of the month)
2. On last working day - 1 of the month. ( a field "month end" captures the date as last day of the month)
Please let me know how i can achieve this via Out of box functionality. I donot have exp with workflows so a detailed steps guidlines will be very helpfull.
Regards,
Guru

Although you can start a workflow and then pause it for a number of days, I'd feel uncomfortable with that. If the farm crashes, who guarantees that the paused workflows will pick up where they were left off?
SharePoint does no offer to run a workflow on all items in a list/library -- which I feel is a big draw back.
The good news is that there is a free 3rd party tool that can run a workflow on all (or specific) items in a list or library. It's called the
HarePoint Workflow Scheduler and I love it.
You can create a view that shows the items that you want to run the workflow on.
Or, if you know how to write CAML, you can feed the CAML Query right into the HarePoint Workflow Scheduler task.
At my company we have several sites in production that use the HarePoint Workflow Scheduler with a view.
So, first, create a SharePoint Designer workflow and define it to run manually.
Then use the HarePoint workflow scheduler to define a schedule.
You can define a schedule for the HarePoint tool, like every day, month, week, etc., by just clicking a few boxes.
Since this functionality does not come out of the box with SharePoint 2010, this free tool is a real gem.
cheers, teylyn

How to change font size in a call-out tool box?

Hi, the other day i inserted a call-out tool box in a PDF document, however i cannot find anything that can change the font size of the letters i input in that box. could anyone help? Thanks.
Sherman

This is a question for the Acrobat support forums – please post there.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 23 Nov 2011 10:55:07 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: how to change font size in a call-out tool box?
Re: how to change font size in a call-out tool box?
created by danmarch<http://forums.adobe.com/people/danmarch> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4043425#4043425

How to show only date in BO webi 3.1 text box

how to show only date in BO webi 3.1 text box for e.g:-
01/01/2005 (no time only date)

hi,
just check by which format your date is coming
just create a one variable and check =UserResponse("Transaction Date From (mm/dd/yy)")
if your output is in format of("mm/dd/yyyy hh:mm:ss a")
then some format we have to write in todate syntax
then your final formula for date would be
=FormatDate(ToDate(UserResponse("Transaction Date From (mm/dd/yy)");"mm/dd/yyyy hh:mm:ss A");"dd/mm/yyyy")

Web util out of box

Similar Messages

Maybe you are looking for